Minerals & Metals

Deslagging Agent Product Description This product has excellent slag-aluminum separation performance, can effectively separate the aluminum in the slag, and the slag formed is not agglomerated, and the aluminum content in the slag is very small. It is used to remove scum on the surface of aluminum melt, and it can also be used for furnace cleaning and smelting with waste heat. Product Specification Scope of application Deslagging agent JT-D1 Medium temperature slag in the furnace JT-D2 High temperature slag removal outside the furnace JT-D6 High temperature slag breaking outside the furnace Purification Flux Performance Features: 1. This product has heating characteristics during use, and the slag forming speed is fast and the slag is easy to remove. 2.This product has excellent slag-aluminum separation performance, can effectively separate the aluminum in the slag, and the slag formed is not agglomerated, and the aluminum content in the slag is very small. It is used to remove scum on the surface of aluminum melt, and it can also be used for furnace cleaning and smelting with waste heat.

Magnesia chrome brick is a type of refractory brick. Magnesia chrome brick is made by combining (MgO) and chromium trioxide (Cr2O3) in a high-temperature firing process. The resulting brick is highly resistant to corrosion, thermal shock, and wear. Magnesia Chrome Brick is mainly used in the metallurgical industry, such as the construction of flat-bottom furnace roofs, electric furnace roofs, refining furnaces outside the furnace, and various non-ferrous metal smelting furnaces. The content of chrome can be adjusted according to the customer’s requirement.  Magnesia chrome brick Features Good thermal shock resistance Excellent slag wear resistance Good cold compression strength High temperature resistance and high fire resistance High-grade chrome ore raw materials Lower impurity content

Magnesia Carbon Brick is a resin-bonded brick produced from dead-burned or fused magnesia and graphite, with some metallic powder as anti-oxidants to protect the carbon durability. MgO-C bricks are used extensively in high quality steel alloy making processes especially in basic oxygen furnaces, electric arc furnaces, ladle refining furnances,and is widely popular in the steelmaking industry. Magnesia Carbon Brick is mainly used in the converter lining, which is in direct contact with molten steel and molten slag. Mag Carbon Bricks have been used in the ladle refining slag line and has achieved good results. It is also used in the lining part of AC electric arc furnace, DC electric arc furnace, converter and other components. Mingshi Magnesia Carbon Brick Advantages: Good high temperature resistance: Bbetter insulation performance than magnesium aluminum carbon brick Strong anti-slag penetration resistance Resistance to thermal shock High Corrosion resistance to slag Non-Wettability to molten slag Increases lifespan of the vessal. Proper residual expansion

What is Caustic Calcined Magnesite (CCM) Caustic calcined magnesia (CCM) is a highly reactive form of magnesium oxide produced by calcining crude magnesite, brucite, or magnesium hydroxide extracted from brine at temperatures between 600°C - 1000°C. CCM is mainly used in: Agricultural applications, Hydrometallurgical processes, Pulp and paper, Construction and Sorel cement, Chemicals and pharmaceuticals industry, Environmental applications, Glass industry. Application: Construction: Indust , rial Flooring ·Ceramic tiles, boards & panels ·Abrasives Industrial: Hydrometallurgy ·Pulp & Paper Specialties: ·Glass making ·Friction materials Agri-business: ·Animal Nutrition ·Fertilizers ·Agriculture Enviromental: ·Soil decontamination ·Waste neutralization ·Water treatment ·Flue gas treatment

Fused magnesia (FM) is a type of refractory material that is produced by the electric arc melting of caustic calcined magnesia, deadburned magnesia or raw magnesite in furnaces at temperatures in excess of 2750°C. It has a high melting point, excellent thermal shock resistance, and good chemical stability, making it a popular choice for use in a variety of industrial applications such as steelmaking, cement manufacturing, and glass production.  Fused magnesia (FM) Application: - High performance MgO-C refractory bricks for steel industry, - Fired refractory bricks for cement and glass industry, - Heating elements industry Mingshi Fused Magnesia Production Process: Magnesite (magnesium carbonate MgCO3) is converted into magnesia by the application of heat which drives off carbon dioxide (CO2), thereby converting the carbonate to the oxide of magnesium (MgO). Fused magnesia is a high-purity material used in the production of refractory materials, ceramics, and other industrial applications. The production of fused magnesia involves several steps. Raw Material Preparation: The raw material used in the production of fused magnesia is magnesite, a natural mineral. The magnesite is first crushed into small pieces and then calcined at high temperatures to remove impurities and water. Fusion: The calcined magnesite is then mixed with coke and other additives and fed into an electric arc furnace. The furnace is heated to a temperature of around 3,000 degrees Celsius, causing the magnesite to fuse into a molten state. Cooling and Solidification: The molten magnesia is then cooled and solidified by pouring it into molds or by spraying it with water. This process can take several days or even weeks, depending on the size and shape of the desired product.

85%-92% Dead burned magnesiais mainly made of natural magnesite ore with 46% content, which is calcined by high temperature kiln at about 1400℃-1800℃. Application: Dead burned magnesia is mainly used as raw material for making magnesia bricks and producing amorphous refractory materials. The finished products are used in steel making, electric furnace bottom and ramming furnace. The main varieties of dead burned magnesia have 85%-92% content, these varieties are mainly selected 46.5% to magnesite, sintered kiln calcination heating to 1400-1800 ℃ Mg(CO3) completely decomposed, generating magnesite, become hard reddish-brown dead burned magnesium, it has a high refractorability. Dead burned magnesia is mainly used for magnesia brick, steelmaking, electric furnace bottom and ramming furnace lining. Product Name MgO (%) SiO2 (%) Al2O3 (%) Fe2O3 (%) CaO (%) Loi (%) BD (kg/cm3) Package DBM85 85 MIN 7.0MAX 0.7MAX 0.6MAX 5.0MAX 0.8MAX 3.10MIN TON BAG (1.25) DBM90 90 MIN 4.8MAX 1.0MAX 0.7MAX 4.0MAX 0.6MAX 3.15MIN TON BAG (1.25) DBM92 92 MIN 4.8MAX 1.0MAX 0.7MAX 3.5MAX 0.5MAX 3.15MIN TON BAG (1.25)

Astm Jis Sus 201 202 301 304 304l 316 316l 310 410 430 Stainless Steel Sheet/plate 0.45mm~5mm(china) We offer a wide range of stainless steel sheets and plates in various grades such as ASTM, JIS, SUS 201, 202, 301, 304, 304L, 316, 316L, 310, 410, and 430. These sheets are available in thicknesses ranging from 0.45mm to 5mm, providing flexibility for different applications. Our stainless steel sheets and plates are manufactured in China and meet international quality standards. They are widely used in industries such as construction, automotive, kitchenware, and more. With their excellent corrosion resistance and durability, our stainless steel sheets and plates offer reliable performance for your specific needs.

2B BA No.1/2E HL Mirror No.4 Surface Finish Stainless Steel Sheet 201 Grade AISI/ASTM/SUS/JIS/DIN/TUV/BV/ETC Standard 201 Stainless Steel Sheet Plate 2b BA Surface 1500mm Width ASTM Standard Stainless Steel Plate 201 Stainless Steel Plate has good formability, corrosion resistance, and workability. SS 201 plate is similar to SS 301. These stainless steel 201 coils (UNS S20100) are an austenitic chromium-nickel- manganese stainless steel that was originally developed to protect nickel. It is a low-cost alternative to traditional Cr-Ni stainless steels (such as 301 and 304). At the same time, about half of the nickel content in stainless steel 304 is replaced by an alloy with manganese and nitrogen added. This results in higher strength than alloy 304. Product Description: The 201 SS Sheet Steel is a type of stainless steel sheet made of 201 stainless steel. It is characterized by excellent hardness, usually not exceeding 201HB, and good formability. The 201 SS Sheet Steel is available in various shapes such as sheet, coil, strip, and plate. Its surface can be treated in various ways, such as 2B, BA, HL, 8K, No.4, and Etc. It has a mill edge and a slit edge, and its length can be customized from 1000mm to 6000mm. 201 Stainless Steel Sheet is widely applied in a variety of industries, including chemical, pharmaceutical, food processing, petrochemical, thermal power, and metallurgical. It is highly resistant to oxidation and corrosion, and is highly durable. It is also environmentally friendly and recyclable. With its superior performance and excellent properties, the 201 SS Steel Sheet is an ideal choice for many applications.

Customized size of ball mill machine Luoyang CITIC IC Industries Co.,Ltd is knew by LUOYANG MINING MACHINERY PLANT as used name,CITIC IC,also has passed the certification of ISO9001- 2008. CITIC IC mainly engaged in the designing and manufacturing of large machinery components and non-standard machinery parts. We have capacity to take producing of large forging and casting machinery,the designing, installation and maintenance of various hydraulic station lubrication station systems and hoist hydraulic station lubrication stations. And provide service of for mines, power plants, and metallurgical equipment, and distribute various hydraulic pressure Station lubrication station pump valve, pneumatic components, accessories, electromechanical equipment. The main products are: mining machinery, hoisting machinery, coal preparation machinery, crushing and grinding machinery, cement machinery, metallurgical rolling machinery, high-power reducer, large casting and forging, etc.for example if go specifically，shafts,gears sprockets,sheaves,couplings,bearing supports,castings and forgings. CITIC IC has long and good business relationship with 28 countries including the Malaysia, Russia, Germany, Belgium,Spain,Australia, South Africa,and India etc.

Minimum Order: 1 bags

The stainless steel induction heating solid solution bright annealing furnace is widely used in a stainless steel welded pipe production line, In the manufacturing process of the stainless steel pipe, the diameter of the pipe is Φ6 and Φ273mm, which is suitable for stainless steel SUS304, 316, 316L, etc. The online running speed is adjustable from 0 to 10M/min, the heating temperature is set according to the material of the solution treatment, and the advanced infrared temperature measuring automatic detection system and the synchronous solution refrigeration system are equipped with the advantages of simple operation, multi-function, multi-protection, multi-display, and integrated self-contained water cooling system. need not be equipped with external water cooling device. The steel pipe is heated by all-solid-state IGBT induction heating power supply, which has the characteristics of small occupied area, light weight, low working voltage, high safety factor, low high-frequency radiation, low noise, low failure rate, low maintenance difficulty, and the like. The control system is controlled by PLC imported from Germany. Large-screen display made in Taiwan can be used to visually understand the operation status and fault condition of the equipment. The whole machine is equipped with various protection measures to greatly improve the stability and reliability of the equipment and complete the interlocking control and protection functions with the production line. The bright heat treatment process avoids the environmental pollution caused by the traditional pickling treatment process, and aims at eliminating the structural defects of stainless steel, reducing the hardness, improving the performance of steel and restoring the plastic deformation capability of the steel to meet the processing requirements. The induction heating power supply is used to heat the stainless steel tube to the temperature above its phase change temperature (austenitic stainless steel generally does not exceed 1100 degrees centigrade) and then cool down after a certain time. Generally for protective atmosphere annealing, the purpose is to avoid oxidation caused by the surface of the regeneration of iron oxide scale, so commonly known as bright annealing. The bright continuous heat treatment furnace mainly consists of a heating part and a cooling part. In order to meet the requirements of welding different pipes, an independent support frame device is designed, on which heating and quenching systems are installed. The support frame can adjust the height of the center line of the bright heat treatment device. The quenching chamber connected to the sealing bush of the heating coil is completely closed, and the water is cooled on the outer surface, while inside the tube, a conductive medium with high heat conductivity rapidly transfers heat from the stainless steel tube to the outer water cooling chamber surface. The whole quenching process is carried out under the control of the protective atmosphere to ensure that the brightness treatment can be continued before the outlet temperature. At the same time, the equipment adopts intelligent ignition system to monitor the flame state at any time. Because the furnace body adopts front and rear sealing and the air path is reasonable, the bright reaction is quick, the number of black pipes is reduced, and the consumption of protective gas is greatly saved for users. A heating sensor designed to increase heating efficiency includes an atmosphere sealing bush containing a controllable protective gas for preventing contamination from the external environment. The direct water quenching device plays a very important role in keeping the consistency of product size. and the length of quenching is kept to a very small extent.

Minimum Order: 1 bags

The application of stainless steel profiles in engineering construction is based on the good corrosion resistance of stainless steel, so that the structural members can permanently maintain the integrity of the engineering design. Chromium-containing stainless steel also combines mechanical strength and high elongation, making it easy to process and manufacture parts that can meet the needs of architects and structural designers. After the first successful practical application, the stainless steel profiles have the standard specifications of stainless steel Angle, flat and square steel. Stainless steel profiles are stainless steel materials with different cross- section shapes made by hot melt extrusion of stainless steel rods. The production process of stainless steel profiles mainly includes three processes: casting, extrusion and coloring. Among them, coloring mainly includes: oxidation, electrophoretic coating, fluorocarbon spraying, powder spraying, wood grain transfer printing and other processes. Stainless steel Angle steel: Gauge ∠10 mmX 10mm-∠150mmX150mm. Stainless steel flat steel, stainless steel square steel: specification 10mmX10mm-7 50mmX750mm. Stainless steel profiles are mainly used in industrial production and manufacturing, such as automated mechanical equipment, the skeleton of the shell, and various companies according to their own mechanical equipment requirements, such as conveyor belts, lifts, dispensing machines, testing equipment, shelves, etc. It is mostly used in the electronic machinery industry and clean rooms.

Minimum Order: 1 bags

1. Reduced corrosion resistance due to damage or contamination. Corrosion may occur where the film has been damaged, and other forms of contamination are present that prevent the natural re-formation of the passivated film. All the beneficial properties of stainless steel can be destroyed during processing, such as heat treatment or machining, such as welding, cutting, sawing, drilling and bending. As a result of these treatments, the oxide protective film on the stainless steel surface is usually damaged or contaminated, making it impossible to achieve spontaneous and complete passivation. As a result, localized corrosion may occur, even under conditions where corrosion is relatively weak. When used, it can result in an unsatisfactory end product, or even worse, the failure of critical systems. A: Welding causes accelerated oxidation on the inside, outside and near the weld. Oxidation is visible because there are areas of discoloration, and the color is related to the thickness of the oxide layer. Compared with the oxide layer on the stainless steel before welding, the oxide layer in the discolored zone is relatively thick, and the composition changes (containing less chromium), which reduces the local corrosion resistance. For the inside of the tube, oxidation and discoloration can be minimized by using proper backwashing methods. After welding, post-welding treatments such as pickling and grinding are usually required to remove oxides (color) and restore corrosion resistance. Color charts are often used to determine whether a weld needs pickling based on color grade. However, this decision is subjective, and in principle each color indicates the presence of oxidation and the affected oxide layer, thus reducing corrosion resistance. B: Mechanical treatment usually uses mechanical or non-mechanical contaminated surfaces. Organic pollutants can be caused by lubricating oil. Contact with tools can lead to inorganic contaminants such as foreign iron particles. Plaque is often caused by surface contamination of all kinds. In addition, foreign iron particles may cause galvanic corrosion. Pitting and galvanic corrosion are local forms of corrosion that initially require water treatment. Therefore, surface contamination usually reduces the corrosion resistance of stainless steel. 2. Surface treatment. In order to prepare the surface, remove discoloration and restore corrosion resistance, there are many post-treatments and methods. Here again we should distinguish between chemical and mechanical methods. Chemical methods are: pickling (soaking, with pickling paste or pickling spray), auxiliary passivation (after pickling) and electrolytic polishing. Mechanical methods are: sandblasting, glass or ceramic pellet shot blasting, painting, polishing. While all methods produce welded joints, no mechanical post-treatment will provide corrosion properties suitable for harsh applications. Use chemical methods to remove oxides and other contaminants from surfaces, while using mechanical methods to potentially remove contaminants from previously removed, polished, or erased materials. All kinds of pollution, especially foreign iron particles, can be a source of corrosion, especially in humid environments. Therefore, mechanically cleaned surfaces are best cleaned regularly under dry conditions. After pickling, it is important to properly rinse with water to remove all contaminants and pickling residues. The final rinsing should be done with softened water to avoid calcium stains and contaminants embedded in the growing oxide layer, which is necessary to build the passivation layer. In addition, due to the use of chemical methods (pickling and electrolytic polishing) to improve corrosion resistance, iron dissolves faster in pickling solutions and electrolytes than other metals. According to this, the surface is enriched with chromium and becomes more durable. Therefore, chemical methods of pickling and electropolishing are the only post-treatment methods that can restore the corrosion resistance of stainless steel in the weld and other surface damage that occurs before welding. This is actually independent of the type of stainless steel, there is no difference between the effect of pickling by soaking in the tank and using pickling paste or spray.

Minimum Order: 1 bags

Table Size (mm) 900x400 Number of Axes 6 Table Travel (X) (mm) 3000 Table Travel (Y) (mm) 400 Other attributes Condition New No. of Spindles 6 Type VERTICAL Weight (T) 0.01 T Table Travel (Z) (mm) 1000 Positioning Accuracy (mm) 0.0075 Repeatability (X/Y/Z) (mm) 0.005 Spindle Motor Power(kW) 5.5 Min. Time of Tool Change(s) 4 Tool Magazine Capacity 16, 20 Key Selling Points Automatic Warranty 3 months Place of Origin Guangdong, China Applicable Industries Machinery Repair Shops, Manufacturing Plant, Construction works , Other Showroom Location None Marketing Type New Product 2023 Machinery Test Report Not Available Video outgoing-inspection Not Available Warranty of core components 3 months Core Components Other Spindle Taper ISO40 Dimension(L*W*H) 25*50*55 CNC Control System GSK, FANUC, KND, Siemens Range of Spindle Speed(r.p.m) 50 - 60 r.p.m Max. Table Load(kg) 20 kg Feed Speed(mm/min) 20 - 50 mm/min Brand Name JGH Voltage 220V/380V Product name five-aixs linkage machine tool CNC or Not CNC Systemn Keywords Vmc Machine Center Color Custom-made Features High Precision Economical Trade Terms FOB Brand JGH Product type Cnc 3/4/5 Axis Machine Material Cast Iron Packing foam+carton Packaging & delivery Package Type: Foam + Carton/Foam + Wooden Case Supply Ability Supply Ability 5000 Piece/Pieces per Month

Minimum Order: 1 bags

S19j Pro+ 120T Description The Antminer S19J Pro+ launched in 2020 is a brand new server launched by Bitmain. Compared with the S19j Pro, the performance has been improved by 10, and it adapts to global data centers and US industrial electricity standards without a converter. There is only one port, which is simpler but more efficient, helping investors to greatly reduce the cost of electrical renovation. Company Profile SCMINER Company Limited founded in 2017, has its headquarters in Chang Jiang Center, Long Hua District, ShenZhen, China, with maintenance, test factories and warehouse in ShenZhen, Hong Kong and Moscow. We have all together employ 100 people. Our company offer One-shop Exportation Service Of Brand-new ASIC Miners with Mature Logistics System Supports Global Delivery over 6 years experience. We have large inventory of most the Hot-selling Models in Stock. Our sales representatives is proficient in English, Russian, French and other languages, provides professional services to customers from all over the world.