Minerals & Metals

Fiberglass Filtration Pouch is weaved through special process, its withstand temperature up to 1000 °C.  Apply to filter and evenly distribute molten aluminum in molds. 1. New environmental protection material, does not burn during whole use process , no harm to human body.  2. Advanced production equipment, warp and weft standard for base cloth, high temperature resistant coating mesh uniform, the finished product is exquisitely made without burrs.  3. Both sides of the bag adopt square hole fixing device technology, more convenient operation and improve the working rate.

There are a total of 6 interface types available for Polyester network interfaces. Steel card interface Unprovoked interface Single pin ring interface Double pin ring interface Fold ring interface Spiral ring interface Polyester forming fabrics size windage Polyester forming monofilament dryer fabrics.polyester spiral.Sludge sewatering.Press and filtrate fabrics size sindage. 

Professional unique design and weaving from polyamide &PPS yarns, mainly working temperature over 100ºC, the alkalinity>20%(20% sodium hydroxide) filtration press industry, excellence running under high tensile strength and wear resistance due to the special material. Such as the chemical industry, pharmaceutical process, and so on.

Act the solid & liquid separation in the wet desulfurization of the power plant, tailings, metallurgical mining, chemical industry, coal chemical, paper & pulp, steel plant power, pharmaceutical. Applications: Polyester Desulfurization Filter Screen Mesh Belt Mainly used for series of rubber belt vacuum filters, horizontal vacuum belt filter, drum belt filter, vertical filter press. Act the solid & liquid separation in the wet desulfurization of the power plant, tailings, metallurgical mining, chemical industry, coal chemical, paper & pulp, steel plant power, pharmaceutical.

Antistatic Mesh Belt Professional unique design and weaving from Polyester fiber & bronze/carbon  wires, mainly used for MDF board and fiberboard process industry, chemical fiber and drying for papers, etc. Act the continuous press filter belt of forming press and other applications with the antistatic requirements.

Sludge dewatering belt mainly is used for sludge dehydration in sewage treatment factories. They have the characteristics of good water permeability, air permeability, and non-revealed sludge, acid-resisting, alkali-resisting, heat resistance (180°C) Because of their design structure, the sludge can be peeled off easily after a pigeonhole filter, so the screen is easily cleaned and have a long working time. Therefore they are designed especially for sludge dehydration.

In the paper mills, the polyester plain woven fabrics can be used for making pulp washing. In the mining industry, the fabric can be used in the mining separation as a conveyor belt. In food processing, the fabrics can be used in the drying part, such as biscuit drying, tea drying, seeds drying, fruit drying, and so on. Linear Screen Cloth is mainly used in mining industry filtration, food industry filtration and dryer, Making of paper pulp. In the paper mills, the polyester plain woven fabrics can be used for making pulp washing. In the mining industry, the fabric can be used in the mining separation as a conveyor belt. In food processing, the fabrics can be used in the drying part, such as biscuit drying, tea drying, seeds drying, fruit drying, and so on.

This kind of Polyester Spiral Press Filter Belt is made of polyester spiral dryer fabric which is filled with stuff to reduce the air permeation and to intensitive the opening, hence reducing the material loss from the mesh opening. Polyester spiral filter belt is suitable for high-pressure press-filter washers, horizontal belt washers, pulp-liquor separators, and netting belt coal-washer. It has been extensively used in all kinds of industries such as printing and dyeing, food, salt industry, pharmaceutical, environment protection, process hides,shoe-making, clothing, pottery, and other conveyable belt est.

Polyester Spiral Link Dryer Fabric Polyester Spiral Belt according to Finland standard with first-class monofilament. The unique construction involves flat ribbon spirals connected to a straight round rod, creating a continuous and seamless screen spiral. The belts undergo heat-setting treatment before leaving the factory, ensuring structural stability and improved surface flatness. Crafted from fine spiral polyester mesh, our polyester spiral belt features a specially designed spiral structure, ensuring suitability for high mechanical loads and seamless applications. Heat-setting treatment of spiral dryer fabric before leaving the factory enhances structural stability and extends the service life. Polyester spiral belt advantages • Enhanced Durability: Flat surface and Good Strength. Heat-setting treatment improves structural stability, surface flatness, and overall durability, large air permeability with a longer service life. • Temperature Resistance: Polyester variant withstands up to 150°C, PPS variant excels at temperatures up to 240°C. High-temperature resistance, abrasion resistance, and aging resistance. • Chemical Stability: Certified BPA-free and food-grade, demonstrating excellent chemical stability. stable running, not easy to wrinkle, high filtration rate and it can peel off easily from the filter cake • Seamless Connection: Polyester mesh belt features a seamless connection, ensuring consistent air permeability throughout the filtering area. Excellent elongation resistance. • Customizable Sizes: Widths support 10 cm to 10 meters, customizable lengths for various applications. Great resistance to chemicals, such as acids and organic solvents. Polyester spiral belt applications Polyester Spiral Belts from Huaqiang are mainly used on paper making, printing and dyeing, food, pharmaceutical, ceramics and sold & liquid separation industry, mine, metallurgy, and other fields. 1. Versatile Use: Spiral belts are ideal for filter belts, dryer belts, or conveyor belts in food processing, pasta drying, and ready-to-use produce washing. 2. Fruit Drying: Polyester conveyor belt is suitable for the food processing industry, particularly in the drying of fruits. 3. Filtration Processes: Polyester belt is widely used in the dairy industry for filtration processes. 4. Transportation: In the fishing industry, mesh conveyor belt serves as an efficient solution for transportation.

Luoyang CITICIC Industries Co.,Ltd,grew out of the "LUOYANG MINING MACHINERY PLANT",are a direct OEM factory engaged in the manufacturing of non standard machinery parts. Including CITIC hmc,ball mill, Metso,spur gear,helical gear,herringbone gear,straight bevel gear,sprial bevel gear,inside gear,worm gear,rack gear segment gear,rotor shaft,step shaft,thread shaft,pinion shaft,shaft,gear shaft,spline shaft,flange shaft,roller shaft,hollow shaft,sprocket,shaft coupling,sliding bearing,rope sheave,support roller,bearing block,belt wheel,bearing block,machine frame,wear resistant parts,non standard machinery parts,toothed-wheel rims.

Minimum Order: 1 bags

12 Ton Xiangtan Electric Locomotive Powered by Lithium Battery Battery electric locomotive is a kind of track traction equipment powered by batteries, which is generally used in mines. There are two types of battery electric locomotives, explosion-proof type and ordinary type. The explosion- proof type is mainly used in coal mines. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) : 12 ton Track gauge (mm) : 600.762.900 Traction (KN) : 16.48 Max. Traction (KN) : 29.43 Speed(km/h) : 8.7 Battery Voltage (V) : 192V Battery Capacity (Ah) : 560 Power (KW) : 22 KWx2 Dimensions Length(mm) : 5100 Width(mm) : 1050,1212or 1350 Height(mm) : 1800 Wheelbase (mm) : 1220 Wheel diameter (mm) : 680 Min Curve radius (m) : 10 Controller : Resistencia or IGBT Braking method : Mechanical Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarante the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags

Molybdenum Tube has the advantages of high dimensional accuracy, high internal and external surface finish, good straightness, no deformation under high temperature strength, etc.   Parameter: Molybdenum tube appearance silver gray metallic luster Molybdenum tube purity not less than 99.95% Molybdenum tube density ≥18.3g/cm3 Supply state sintering state or drilling state Executive standard GB/T 4187-1984  ASTM F288-90 Executive standard GB/T 4187-1984 ASTM F288-90 Size range Outer diameter Φ(1.0~50)mm× wall thickness (0.1~5)mm×(50~1000)mm   Applications:< , br>Molybdenum tube is mainly used in high temperature furnace thermocouple protection tube, sapphire single crystal furnace, high temperature sintering furnace support parts.   Youbo is your premier destination for top-of-the-line Molybdenum Tubes and Pipes. As one of the leading Molybdenum Tube suppliers, we take pride in offering exceptional Molybdenum Pipe that meet the highest industry standards.

Tungsten electrode is a tungsten electrode made of materials with high melting point, corrosion resistance, high density and good thermal and electrical conductivity. Tungsten electrodes are widely used for welding in their properties. Tungsten electrode grinding or polishing and black rod. The final colors are different, which can distinguish the differences. In tungsten electrodes, more importantly, their final color is different, and their tungsten content is also different. When welding, select the correct tungsten electrode to make welding easier. It is important to obtain high-quality welding. Some important factors to consider in making the right choice are the type of power supply (inverter or transformer), welding material (steel, aluminum or stainless steel) and material thickness.   Parameter: Type AC/DC Recommended Usage 2% Thoriated (Red) DC Copper alloys, nickel alloys, titanium alloys, and stainless steels 2% Lanthanated (Blue) AC& DC Aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and stainless steels Pure Tungsten (Green) AC Magnesium alloys and aluminum alloys 2% Ceriated (Grey) AC& DC Titanium alloys, copper alloys, magnesium alloys, aluminum alloys, nickel alloys, low-alloyed steels, and stainless steels 1.5% Lanthanated (Gold) AC& DC Titanium alloys, copper alloys, nickel alloys, and stainless steels Rare Earth Blend(Purple) AC& DC Aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys, low-alloyed steels, and stainless steel 0.8% Zirconiated (White) AC Handles higher amp levels for magnesium Applications: Pure tungsten electrode is most widely used in AC welding; When pure tungsten electrode is heated, the welding ball becomes sharp to provide a balanced waveform AC welding, and the arc is stable; Pure tungsten electrode also provides good arc stability for sine wave AC welding of aluminum and magnesium.Click For More.   Tungsten Electrode Types: Electrode Type Composition Features Suitable for Pure Tungsten Electrode 99.5% pure tungsten Excellent electrical conductivity AC welding of aluminum and magnesium alloys Thoriated Tungsten Electrode Tungsten + 1-2% thorium oxide Improved electron emission and arc stability AC and DC welding of mild steel, stainless steel, non-ferrous metals Tungsten Electrode with Cerium (2% Ceriated) Tungsten + cerium oxide Improved arc starting, reduced tip contamination AC and DC welding of stainless steel, nickel alloys, carbon steel Lanthanated Tungsten Electrode Tungsten + lanthanum oxide Better arc stability, longer electrode life AC and DC welding of stainless steel, carbon steel, aluminum Zirconiated Tungsten Electrode Tungsten + zirconium oxide Good resistance to contamination, suitable for AC welding AC welding of aluminum and magnesium alloys

Are you searching for a reliable source of pure and high-density tungsten powder? Look no further than Youbo. We proudly present our exceptional range of Tungsten Powder, meticulously crafted to meet the stringent demands of various industries. With unparalleled quality, competitive prices, and versatile applications, our Tungsten Powder is your go-to solution for all your material needs.   At Youbo, we understand the importance of purity when it comes to Tungsten Powder. Our product is composed of pure tungsten, ensuring uncompromised quality and optimal performance. With its high-density composition, our Tungsten Powder offers exceptional strength, excellent radiation shielding properties, and resistance to wear and corrosion. Product Specification: Tungsten powder is classified into FW-1, FW-2 and FWP-1 according to its chemical composition and application. FW-1 is suitable for tungsten carbide powder raw materials, large slabs, processing materials, etc. FW-2 is suitable for contact alloys and high density shielding materials. FWP-l is suitable for plasma spray materials. Grade of tungsten powder Main ingredients Min. W (%) Oxygen content(%) Particle size specification(μ m) FW-1 ≥99.9 ≤0.20 Two party interview FW-2 ≤0.25 FWP-1 ≤0.20   Tungsten Powder Attribute: Tungsten powder metal tungsten in the form of black gray powder is the raw material for preparing tungsten processing materials, tungsten alloys and tungsten products. Surface: dark gray, tungsten powder for spraying is bright gray.