Minerals & Metals

STRANDED BARBED WIRE, RAZOR BARB WIRE AND CONCERTINA Security barbed wire is supplied in three forms: Twisted barb wire, razor barbed wire and concertina barbed wire. Barbed wire and spikes are all mounted along top rails of fencing panels for high level of security purposes. Stranded Barbed Wire Materials: Electro-galvanized Hot dipped galvanized Plastic coated galvanised steel Main types: Single barbed wire or single strand barbed wire Hot Dip galvanized steel barbed wire, HDG Galv. Reverse twisted galvanized barbed wire Double strand barbed wire, electro-galvanised and zinc galv. Typical size: Wire gauge: BWG14 Barb distance:12.5 cm Barb length: 1.8 cm Finish: HDG hot zinc plate (zn) Strand: Double

Palisade Fence Panels with Curved D Sections Spiked on Top for Substation Security We supply fabricated galvanised steel palisade fence panels with vertical curved D sections for security fencing uses. The fencing panels and fittings are corrosion protected by Hot Dip Galvanizing according to BS EN ISO 1461:2009 standard. Standard overall size of the palisade panel is 2500mm length by 2200mm high above the concrete. Fence Panels with Curved D Section Composed of Curved D sections and Angle Rails Material: Galvanised steel palisade fence panels Design: Vertical curved D sections 3mm thick spaced at 150mm centre to centre, spiked on top Installation: Bolted on to galvanised angle horizontal rails, top, middle and bottom, angle rails fixed on to the two end posts of 50mmxI00mmx4mm galvanised hollow section (inclusive). Length of the end hallow section posts is to include an extended length of minimum 1000mm length ready to be cast in concrete. Galvanised tamper proof nuts and bolts to be used. Fencing rails: 50x50x6mm Finish: Galvanised Design: Angle horizontal rails Fixing parts: Galvanised nuts and bolts Sliding steel gate for substation entrance Sliding steel gate of palisade fence panels: Gate size: 6 m wide x 2.2m high at the entrance to the substation Gate design: Framed in galvanised steel hollow section 50 mm x 50mm x 2.5 mm square hollow section, braced with galvanised steel hollow section 100 mm x 50 mm x 4 mm rectangular hollow section, covered with steel hollow sections 25mm x 25mm x 4 mm spaced at 150 mm centre to centre. End posts to be installed in Grade 25 grade concrete. End posts of gate: 100 mm x 100 mm x 4 hot dipped galvanised.

Typical high security palisade fencing system has the following: Steel palisade panels; Steel palisade gates; Top rail security spikes; and / or Razor flat wrap; and / or Razor coil. All material shall be hot dip galvanised to SABS/ISO 1461. Triple Pointed and Splayed Palisade Fence with Razor Wire for High Security Applications Steel Palisade Panels The palisade panels are constructed with triple pointed or spear top posts, top rails, razor spikes, bottom rails and accessories. Modular W section steel palisade panels of pales, posts, rails Modular palisade fence panel with frame post, bottom rail and top rail bolt fixing Spear top fence panels of pales, posts and rails Modular palisade panel fixed with horizontal rails bolted at medium position of the panel height Tubular Fencing Posts Corner posts must be installed at a 45 deg angle. Two 40 x 40mm taps with a 14mm hole must be welded, at 45 deg, 860mm from the bottom and 2700mm from the bottom on the inside flange of the corner post. Four M 12 x 40 mm bolts with hex nuts and washers must be used to secure the panels to the post. A 40 x 40 mm tap with a 14mm hole must be welded 525mm from the bottom, on the inside flange of the corner post, for the earth tail connection. There will be occasions when the Posts will be surface mounted and in these instances the Post shall be only 2400mm long having a 200mm x 200mm x 6mm Base Plate fully welded to the Post. The Base plate shall have Four 14mm Diameter holes positioned at 140mm centres at each corner of the Base Plate. The Post shall be secured by means of Four 12mm Stainless Steel Chemical Anchors. Palisade Panels.(Refer to figure 6) Three normal panel sizes options: 825 x 2350 mm, 1200 x 2350 mm and 2100 x 2350 panels. Fittings for fixing the panels: hot dip galvanised cap square bolts, hex nuts and washers, stainless cap square bolts and hex nuts and washers. Top Rails. (Refer to figure 6) Material: 50mm x 50mm x 5mm angle iron. At the end of the rail a 13mm hole must be drilled through the centre for M12 mounting bolts. Razor spikes must be fitted to top rails by means of 6 mm pre-drilled holes (before galvanising) and secured with 4.8 mm full stainless steel pop rivets. Top Rail Security Spikes. Industrial standard high security spikes shall be used.

We produce steel wire mesh in China for 20 years. Please feel free to contact me.

Minimum Order: 1 bags

Locomotora minera de 8 toneladas alimentada por batería La locomotora eléctrica a batería es un tipo de equipo de tracción de vías alimentado por baterías, que generalmente se utiliza en minas. Hay dos tipos de locomotoras eléctricas a batería, el tipo a prueba de explosiones y el tipo ordinario. El tipo a prueba de explosiones se utiliza principalmente en minas de carbón. También hay muchas opciones en términos de regulación de velocidad y métodos de frenado. Los métodos de control de velocidad incluyen control de velocidad de resistencia, control de velocidad de corte y control de velocidad de conversión de frecuencia. Los métodos de frenado incluyen frenado mecánico puro, frenado hidráulico y frenado de aire comprimido. Además, el frenado eléctrico también se puede seleccionar como método de frenado auxiliar. Peso adhesivo / total (t): 8 toneladas Ancho de vía (mm): 500.600.762.900 Tracción (KN): 11,18 o 12,83 Máx. Tracción (KN): 19,62 Velocidad (km/h): 6,2~7,8 Voltaje de la batería (V): 110~140 V Capacidad de la batería (Ah): 440 Potencia (KW): 11 o 15 KWx2 Dimensiones Longitud (mm): 4420 Ancho (mm): 920, 1082 o 1220 Altura (mm): 1600 Distancia entre ejes (mm): 1100 Diámetro de la rueda (mm): 680 Radio de curva mínimo (m): 7 Controlador: Resistencia o IGBT Método de frenado: Freno mecánico o neumático Ventajas de nuestro producto 1. El uso de placas de acero de alta calidad y un proceso especial de eliminación de óxido garantizan una mayor resistencia a la corrosión y son adecuados para entornos mineros hostiles. 2. La producción de motores por nuestra cuenta, utilizando material de aislamiento de alta palanca y cobre puro, garantiza una potente fuerza de tracción y es adecuado para entornos mineros hostiles. 3. La superficie de anastomosis de los engranajes alcanza más del 80 %, lo que supera con creces el estándar. 4. El marco diseñado y ajustado profesionalmente garantiza una conducción segura y evita caídas de los rieles. 5. Se puede elegir una variedad de métodos de frenado, freno de aire, freno hidráulico, freno eléctrico, freno mecánico para garantizar la conducción segura. 6. 40 años de rica experiencia con la capacidad de diseñar y fabricar productos personalizados de acuerdo con sus requisitos. 7. Prueba de fábrica en línea: visita Prueba de locomotora minera 1. Antes de poner en marcha la locomotora, realice la depuración de los engranajes, la iluminación, los engranajes y el ajuste de los frenos, etc. para garantizar el funcionamiento normal de la locomotora. 2. Realice una prueba de tracción antes de salir de la fábrica para garantizar que el rendimiento de carga de la locomotora cumpla con el estándar. Nuestros estándares de diseño generalmente superan el estándar nacional en un 10%-20%. 3. Realice diferentes tipos de pruebas de funcionamiento antes de salir de la fábrica para garantizar el rendimiento y el funcionamiento normal de toda la locomotora. Puede adaptarse a diversas condiciones duras en condiciones de trabajo simuladas. Prueba del motor El motor tiene que pasar por muchos procedimientos de inspección antes de salir de la fábrica, y cada motor tiene que realizarse con experimentos de funcionamiento con carga. Los motores a prueba de explosiones se realizan con prueba de presión de agua. Todas las pruebas del motor son para garantizar que pueda adaptarse a condiciones de trabajo duras. Casos 1. Un buen comentario de un cliente de América Latina sobre nuestra locomotora de batería de litio 2. Para resolver los problemas existentes de las baterías de plomo-ácido, más de 30 locomotoras eléctricas de batería de plomo-ácido en esta gran minería se cambiaron a locomotoras eléctricas de batería de litio, lo que mejoró el entusiasmo laboral y la eficiencia de producción de los empleados, redujo los costos y es más amigable con el medio ambiente. 3. El carro perforador de roca para minería diseñado por Sunward Co. tiene un tamaño pequeño y una estructura simple, por lo que el espacio para colocar la batería de litio en la carrocería es muy limitado. De acuerdo con el tamaño limitado, nuestra empresa diseñó un plan de energía de suministro de energía de litio, que resuelve perfectamente el problema del espacio de suministro de energía de litio. Para adaptarse al entorno industrial y minero especial y mejorar la eficiencia del transporte, se diseñó un lote de locomotoras eléctricas de batería de litio de 2,5 toneladas para los clientes de Myanmar. Preguntas frecuentes ¿Cuáles son las ventajas de su producto? Contamos con más de 40 años de experiencia en este campo, por lo que podemos diseñar o producir la locomotora según sus necesidades. También podemos ofrecerle un servicio en línea para enseñarle cómo operar y mantener la locomotora. Lo más importante es que producimos la parte principal de la locomotora: los motores de tracción. Podemos garantizar la potencia de la locomotora. 1. Servicio de preventa: La amplia gama de productos nos permite proporcionar a nuestros clientes máquinas individuales o plantas de procesamiento completas. Según los pedidos y el presupuesto de nuestros clientes, nuestros expertos crean soluciones eficientes y confiables, y producimos siguiendo estrictamente los pedidos de los clientes. Además, cada cliente tiene la oportunidad de visitar la máquina en funcionamiento en el sitio antes de realizar el pedido. 2. Servicio posventa: La orientación de técnicos experimentados está disponible por teléfono y en Internet. Se enviarán uno o más ingenieros a la cantera para ayudar a instalar las plantas del cliente. También se brinda la capacitación necesaria sobre el mantenimiento diario de la máquina a los trabajadores locales. 3. Métodos de pago: T/T (transferencia telegráfica) o Western Union o L/C a la vista Tiempo de procesamiento de un pedido: En un plazo de 10 días desde el stock 4. Método de envío: Pedido de muestra: sugerimos mensajería urgente como DHL/UPS/TNT/FEDEX o por aire Pedido al por mayor: sugerimos por aire o por mar. 5. Control de calidad: Contamos con nuestro propio control de calidad experimentado. Se realizarán inspecciones y pruebas estrictas para cada pedido antes del envío. 6. Servicios posventa: a. Nuestro equipo de ventas responderá a su pregunta dentro de las 24 horas (no se incluyen los días festivos) b. El soporte técnico estará disponible en cualquier momento c. Se proporcionará un reemplazo gratuito una vez que se confirme la falla causada por la calidad de nuestro producto

Minimum Order: 1 bags

Dear Sir, We are a leading Gold Bars Supplier 22+ Carat & 96% Purity and 23 Carat & 98% Purity Gold from Ghana. We have in stock large Quantity of Gold Bars ,Au Dust & Uncut Diamonds, for sale interested to buy can contact for us, sds.marinee@gmail.com WhatsApp +233595675308 thanks Mr.Raymond Atta

Minimum Order: 200

Concrete Reinforcing Mesh Essential For Construction Projects Concrete reinforcing mesh, also known as reinforcing welded mesh, is made of carbon steel or stainless steel and comes in rectangular and square shapes. Its strong structure and high tensile strength improve its bond with concrete and reduce cracking. This mesh is commonly used to reinforce building foundations, roads, and bridge decks. Reinforcing bar supports and tie wires are essential for securing the mesh in concrete structures. Concrete Reinforcing Mesh Concrete reinforcing mesh is made from metal rods ranging from 3 mm to 40 mm in diameter, bonded perpendicularly by spot welding for strong connections. This versatile mesh is used in various construction projects, including concrete footpaths, industrial and commercial slabs, precast panels, and residential foundations. It typically features ribbed steel rods to improve concrete bonding and minimize cracking. Smooth steel mesh is also available for specific project needs.

Welded Mesh Gabions For Erosion Control & Landscaping Rentai Wire Mesh Products Co., Ltd. offers a comprehensive range of welded mesh gabions, made from welded steel wire mesh available in galvanized, PVC-coated, and Galfan-coated finishes. These gabions are durable and suitable for various environmental conditions. Available in multiple wire diameters, dimensions, and unit sizes, they are tailored to meet specific project needs. Ideal for gravity retaining walls, architectural cladding, barriers, erosion control, landscaping, and infrastructure projects, Rentai's gabions provide both structural integrity and aesthetic value. Welded Mesh Gabions Welded mesh gabions are made from cold-drawn steel wire that is electrically welded together. The wire is available in stainless steel, hot-dip galvanized, or Alu-Zinc coated options to ensure durability. Additionally, the meshes can be polymer-coated to protect against corrosion and weathering effects, particularly in salty and highly polluted environments.

Buy Stainless Steel Welded Wire Mesh - Direct From Manufacturer Rentai Wire Mesh Products Co., Ltd. produces and exports a wide range of stainless steel welded wire mesh to suit various industrial, agricultural, and residential needs. Known for its strength, durability, and corrosion resistance, this mesh is ideal for diverse applications including construction, security fencing, and architectural uses. It is available in various mesh sizes, wire diameters, and panel dimensions, customizable to specific requirements. The mesh is not only robust but also versatile, commonly used in machine guards, animal enclosures, support structures, and ventilation grilles. Stainless Steel Welded Wire Mesh Stainless steel welded wire mesh is renowned for its durability and inherent resistance to environmental challenges. This mesh, crafted from stainless steel, does not require additional coatings such as galvanizing or PVC to prolong its life. It is naturally resistant to rust, corrosion, and harsh chemicals, making it ideal for demanding settings. Specifically, Type 316 stainless steel mesh is optimal for saltwater environments due to its enhanced corrosion resistance compared to Type 304, ensuring reliability in marine applications and other areas with significant exposure to corrosive elements.

PVC Coated Welded Wire Mesh For Various Applications Rentai Wire Mesh Products Co., Ltd. offers a wide range of PVC coated welded wire mesh, designed to suit various applications. This durable product is created by welding wire mesh and then applying a robust layer of polyvinyl chloride (PVC), enhancing its resistance to environmental factors. Available in panels, sheets, and rolls, it is customized to meet diverse project specifications. The PVC coating significantly improves the mesh's corrosion resistance, making it perfect for industrial, agricultural, and residential uses such as fencing, animal enclosures, garden boundaries, and safety barriers, where both durability and aesthetics are essential. PVC Coated Welded Wire Mesh PVC coated welded wire mesh, also known as vinyl coated welded wire mesh, is a durable wire fabric welded and then coated with polyvinyl chloride (PVC). Available in various colors such as green, blue, and black—with green being the most popular—it is sold in panels, sheets, and rolls depending on the wire diameter. PVC coated mesh offers enhanced corrosion resistance and aesthetic appeal compared to galvanized wire mesh. Its durability and ability to resist corrosion make it suitable for both indoor and outdoor applications, while its range of colors allows it to aesthetically integrate into diverse environments.

Hot-Dipped Galvanized Mesh Rolls And Panels For Every Need Rentai Wire Mesh Products Co., Ltd. produces Hot-Dipped Galvanized Welded Wire Mesh, designed for durability and corrosion resistance, catering to industrial, agricultural, and residential needs. The mesh is submerged in molten zinc after welding, which coats every joint and intersection thoroughly. This hot-dip galvanizing process provides superior rust protection and increases the mesh's lifespan, especially in harsh environments. It's ideal for outdoor structures like fences and safety barriers, enhancing resistance to moisture and corrosives, and is strong enough for heavy-duty applications. Available in various wire diameters, mesh sizes, and dimensions, Rentai's Hot-Dipped Galvanized Welded Wire Mesh is versatile for uses ranging from security fencing to agriculture, offering long-lasting security and durability across many applications.

Electro Galvanized Welded Wire Mesh Perfect Blend Of Durability And Affordability Rentai Wire Mesh Products Co., Ltd. specializes in producing and exporting Electro Galvanized Welded Wire Mesh, providing a diverse range of types and specifications to suit various industrial needs. This welded wire mesh undergoes an electro galvanization process where low carbon steel wire is first welded into a mesh and then electro galvanized. This method ensures a uniform zinc coating, enhancing the mesh’s resistance to corrosion and extending its lifespan. The robust structure and even surface of the product make it ideal for multiple uses such as fencing, infrastructure projects, and other structural applications. Its corrosion-resistant properties offer an economical alternative to stainless steel, while maintaining excellent durability and strength.

The aluminum tube with a thickness of 1.2mm can provide the user with sufficient bearing capacity. Compared with the traditional lean pipe, the aluminum pipe has less resin coating. Because the supporting connectors are also aluminum materials, it is easy to recycle when doing waste treatment. Moreover, the surface of the aluminum pipe is treated with acid resistant aluminum, and it can be kept beautiful for a long time without maintenance. At the same time, the aluminum tube surface is also coated to reduce oxidation and keep the factory clean.

Minimum Order: 2000

Chain link fence is also called diamond wire mesh, it is a type of woven fence which is usually made from galvanized or PVC-coated steel wire. The wires run vertically and are bent into a zig-zag pattern so that each "zig" hooks with the wire immediately on one side and each "zag" with the wire immediately on the other. This forms the characteristic diamond pattern seen in this type of fence. Chain Link Fence is normally used for protecting fencing and security fencing on playground, construction site, highway side, courtyard, public place, places of recreation and so on. Product Type: (1) Electro galv. Chain link fence (2) Hot dipped galv. Chain link fence (3) PVC coated Chain link fence (4) Stainless Steel Chain link fence Wire diameter:2.0-4.0mm Roll width: 1.0-2.4m Mesh opening: 40*40mm --- 80*80mm