Minerals & Metals

Curved wire mesh fence panels are rigid galvanised steel wire mesh sheet welded and bent / curved into dimentions, also known as 3D fence panels. 3D Curved Mesh Fence Panels prevent people from approaching the perimeters. Can be used as perimeter fence or used together with palisade fence to form a high security double fencing system. Curved welded wire mesh fence panel with posts Curved galvanized wire mesh panels with posts,fittings and post caps Wire mesh galvanized, bend, 3.85 mm x 50 x 120 mm, in 10 feet panels Posts with base plate anchored to concrete foundation 6' post height, 2x2x.12 Galvanized finish and powder coated Powder Coated Steel 3D Bending Mesh Fence Panel Black powder coated steel 3D curved mesh panels Color: Power coat black Material: Galvanized steel wire Supplied with powder spraying Peach post

We supply palisade steel gates as important parts for Palisade Fence System. Tubular fencing gates designed in single gate or double gates are for accessing pedestrian and motors. Like palisade fence panels, the framed gate panels can be topped with anti climbing barbed wires. Leaf types: Single leaf palisade gate Double leaf gate Pales for gate panels: D pales W pales Anti corrosion protection types: Palisade gates, hot dipped galvanized Palisade gates, galv. and powder coated pvc Applications: Double Door Motor Gate Single Security Gate Entry / entrance Gate Pedestrian Gate

Welded meshes are supplied in galvanized and powder paint/ coated finish. Weld mesh panel can be used with steel palisade to form a stronger fencing texture, a dual fencing panels with both steel bar railing and mesh partition. The mesh netting welded also makes a popular secure fencing material for airport, road, residences, prison, garrison and borders. Security Weld Mesh Panelling Weld mesh partition is used with palisade fence and many other fencing materials to provide additional anti-cutting, anti-climbing features. Normally, welded mesh of galvanized finish works with steel fencing of same finish. Zinc coated galvanized steel mesh railings The typical specifications as the following: Fence panel: Welded galvanised 3mm diameter steel wire mesh, wire mesh reinforced, 3.5m height (inclusive of topping coil diamter which should not be more than 700 mm diamter) above top of foundation, 76mm x 12.5mm aperture Fence Posts: fabricated steel posts showing clear sectional dimensions, braced or tapper locking, height of 3.5m above top foundation level Weld mesh panels for gates available. Topping Coil can be mounted above: galvanised steel barbed (blade profile) wire, high density per meter run, with fixing mechanism on steel angles/brakets, posts & fence panels, all topping coil materials complete with all accessories necessary for installation. Galvanized Wire Mesh Fence - Security Mesh Fence of Welded Panels, Posts, Toppings and Gates Galvanized wire mesh fence welded with blade profile barbed wire topping Fence panels, complete with wire meshes, posts (including extended posts 6m high, for installation of CCTV Cameras at intervals of 100 m and all accessories necessary for installation), topping and gates. Typical Specifications: Fence panel: Welded galvanized 4mm diameter steel wire mesh, wire mesh reinforced, 4m height (inclusive of topping coil diameter which should not be more than 700mm diameter) above top of foundation, 76mm x 12.5mm aperture Fence Posts: fabricated steel posts, braced or tapper locking, height of 4m above top foundation level with concrete foundation of sectional dimensions 400mm x 400mm x 700mm depth Fence gates: 8 m double leaf swing and 6 m double leaf swing, and pedestrian gates 1.2 m width, all with installation accessories. Topping Coil: Galvanized steel barbed (blade profile) wire, high density per meter run, with fixing mechanism on steel angles/brakets, posts & fence panels. All topping coil materials are complete with all accessories necessary for installation.

Razor spike tapes are fixed to the top rails of steel fencing, used to prevent climbing and bird perching. Security spikes can be installed with following fence panels and gates: Welded mesh fence; Palisade; Chain link mesh fence; Expanded metal fence. Materials: Stainless steel 430, 304 Hot dipped galvanized steel Galv. and coated. Blade type: Short blade, medium blade and long blade. Features Multi dimensional designs offering superior excellent physical and psychological fencing and safety systems; Anti climbing razors heavily ribbed; Hot dip galvanized finish against corrosion; Easy to install; No maintenance. Fencing Spike StripsHot Dip Galvanized Security Spikes for anti climbing fencing tops Razor spike strips, hot dip galvanized finish, with a 2mm plate thickness and a barb length 100mm. Ribbon lengths options: 1.45 m, 1.8 m, 2.0m, 2.5m, custom size. Steel Palisade Fence with Razor Spike Tops Hot Dipped Galvanized for High Security Fencing Uses Steel palisade fence with galvanized or stainless steel razor spikes mounted on top rails is commonly used for security perimeter and borders. Standard palisade fence system with razor spikes top provides a higher level of safety barrier. Customized sizes are supplied upon requests. Popular combination is palisade 3mm thick pales, 65mm x 2350 mm long spear post or trident top, with gi steel razor spikes 2mm x 100mm x1.45m tape length.

Tripline exports chain link fencing to Africa, Middle East, South America, Caribbean, Australia and other countries. Supply of Chain Link Fence (high tensile, galvanized mesh ) and metal gates for African projects Hot dip galvanized chain link fencing with gates Chain Link Fence and Metal Gates In rolls Specification for fence material as follows: Chain link fence material: High tensile wire, 2.5mm diameter Mesh size 50 x 50mm Hot dip galvanized 8 feet wide x 30m roll Specification for Pedestrian gates as follows: Gates posts 160mm dia, 3.60mm thickness, length 2650mm Overall diameter of gate frame 76mm, 2.6mm thickness Width of gate: 1 wing, 1500mm Wire mesh, 2.5mm diameter, mesh size 50x50, hot dip galvanized, ground to top height 2.00m. Galvanized coating for gate and frame as per DIN2448 equivalent International Standards with related accessories such as braces, gate lock, cap lock, etc. Specification for Vehicular Gates as follows: Gates post 160mm diameter, 3.60mm thickness, length 2650mm Overall diameter of gate frame 76mm, 2.6mm thickness Width of gate: 2 wing, 1500mm each Wire mesh, 2.5mm diameter, mesh size 50x50, hot dip galvanized, ground to top height 2.00m. Galvanized coating for gate and frame as per DIN2448 equivalent International Standards with related accessories such as braces, gate lock, cap lock, etc. Supply of PVC Coated Chain Link Fencing System & Gates Plastic Coated Galvanized Mesh Chain Link Fencing FENCE WORKS FENCE PVC coated chain link fencing mesh size=50×50mm Ø3.55/4.75mm (or similar), 1.9m hight CORNER/END TERMINAL POST ∅90 mm;3.338&2.5*2m longth;4.5 mm THICKNESS (OR SIMILAR) & BRACES WITH ARMS AT 50.0 m C/C AND AT ALL CHANGES IN DIRECTION LINE POST ∅75 mm; 3.338m LONGTH; 3.25 mm THICKNESS (OR SIMILAR) AT EVERY 3.00 m MAXIMUM PVC coated tension line wire in top row Ø3.55/4.75mm (or similar) PVC coated stirrup wire Ø25/3.55mm (or similar) PVC coated tie wire Ø25/3.55mm (or similar) Galvanized barbed wire Ø2mm (or similar)(3rows)with point bars at every 60 centers Stretcher bar (20×5 thick approximately) Acessorie PVC caps: Used to seal the end of the pipes. Cleats: For fixing line wires & diagonal supports Rail end Cap: Used to fix Diagonal supports M10 x 150 LONG Nut & Bolts: For fixing stretcher bar Eye Bolts: For fixing barbed wires ON INSIDE OF FENCE LINE ACCESS GATE Mechanized gate (including 1 removable post, doorpost and door stopper) 7×2.45m Pedestrian access gate Drawing of chain link fence: Material Finish: All hot dip galvanized steel shall conform to ASTM A123/A123M. Wire materials: All wires conform to ASTM F688. Chainlink fencing: conforming to ASTM F1916 Double Leaf Access Gate Materials: Mild steel pipe bracings Both sides padlock Gate frame: Mild steel pipe frame Truss rod diagonal bracings with turnbuckle Mild steel pipe gate post Panel infill: Pvc coated galvanized mesh 50x50 chain link type Pvc coated line wire M10x150 long nut and bolt

Supply of single spiral razor wire with Y fencing post black, 6', 1.8 to 2kg/mtr to fencing wholesaler in US. Single Spiral Razor Wire Hot-dipped Galvanized is a razor barbed wire installed in single coil razor wire fencing. Single Spiral Razor Wire or Concertina Razor Wire? Single spiral or coil razor wire forms a contrast with crossed / double spiral razor wire. Single spiral razor wire costs less due to less using of razor wire materials, while excerts less anti climbing effect then concertina wire. Galvanized Single Spiral Razor Wire CT-65 Size: 18" inner diameter x 50' linear length 33 loops per roll Blade Type: CT-65 Blade Thickness: 0.024" Core Wire Diameter: 0.099" Blade Length:2.56" Blade Width: 0.83" Blade Space:3.94" Package: Carton Box CBT 65 Blade Single Spiral Razor Wire Hot Dipped Galvanized Steel We also supply other blade sizes of single spiral razor wire. Single Coil Razor Barbed Tape Form: Single coil Razor barbed tape in single spiral 500mm Diameter Coil Blade: BTO 22

Concertina Razor Barbed Wire Hot Dipped Galvanized Concertina Razor Barbed Wire is a crossed razor wire clipped into concertina style offering maximum anti-climbing and frightening effects. When mounted on fencing panels, concertina razor barbed wire ( simplified as concertina wire) enhances the strength of the security fencing. Y post is mostly installed with the fencing panel to support the concertina razor barbed wire. Concertina Razor Barbed Wire, Hot Dipped Galvanized Hot dipped galvanized concertina razor barbed wire Material: Galvanized Height / diameter: 700mm Length / diameter: 700mm Length: 10m per coil Blade specification: BTO 22 Type: Cross type razor barbed wire Barbed wire diameter 45 cm 5 rolls per pack / each roll 7 kilos 5 rolls: 35 kilos 200 packs x 35 kilos 304 and 316 SS Concertina Wire Coils Stainless steel concertina wire coils, with stainless steel core Coil Diameter: 30 inch 56 spirals per coil Clips: 3 Coil length: 50 feet Material: High tensile stainless steel 304 core wire

STRANDED BARBED WIRE, RAZOR BARB WIRE AND CONCERTINA Security barbed wire is supplied in three forms: Twisted barb wire, razor barbed wire and concertina barbed wire. Barbed wire and spikes are all mounted along top rails of fencing panels for high level of security purposes. Stranded Barbed Wire Materials: Electro-galvanized Hot dipped galvanized Plastic coated galvanised steel Main types: Single barbed wire or single strand barbed wire Hot Dip galvanized steel barbed wire, HDG Galv. Reverse twisted galvanized barbed wire Double strand barbed wire, electro-galvanised and zinc galv. Typical size: Wire gauge: BWG14 Barb distance:12.5 cm Barb length: 1.8 cm Finish: HDG hot zinc plate (zn) Strand: Double

Palisade Fence Panels with Curved D Sections Spiked on Top for Substation Security We supply fabricated galvanised steel palisade fence panels with vertical curved D sections for security fencing uses. The fencing panels and fittings are corrosion protected by Hot Dip Galvanizing according to BS EN ISO 1461:2009 standard. Standard overall size of the palisade panel is 2500mm length by 2200mm high above the concrete. Fence Panels with Curved D Section Composed of Curved D sections and Angle Rails Material: Galvanised steel palisade fence panels Design: Vertical curved D sections 3mm thick spaced at 150mm centre to centre, spiked on top Installation: Bolted on to galvanised angle horizontal rails, top, middle and bottom, angle rails fixed on to the two end posts of 50mmxI00mmx4mm galvanised hollow section (inclusive). Length of the end hallow section posts is to include an extended length of minimum 1000mm length ready to be cast in concrete. Galvanised tamper proof nuts and bolts to be used. Fencing rails: 50x50x6mm Finish: Galvanised Design: Angle horizontal rails Fixing parts: Galvanised nuts and bolts Sliding steel gate for substation entrance Sliding steel gate of palisade fence panels: Gate size: 6 m wide x 2.2m high at the entrance to the substation Gate design: Framed in galvanised steel hollow section 50 mm x 50mm x 2.5 mm square hollow section, braced with galvanised steel hollow section 100 mm x 50 mm x 4 mm rectangular hollow section, covered with steel hollow sections 25mm x 25mm x 4 mm spaced at 150 mm centre to centre. End posts to be installed in Grade 25 grade concrete. End posts of gate: 100 mm x 100 mm x 4 hot dipped galvanised.

Typical high security palisade fencing system has the following: Steel palisade panels; Steel palisade gates; Top rail security spikes; and / or Razor flat wrap; and / or Razor coil. All material shall be hot dip galvanised to SABS/ISO 1461. Triple Pointed and Splayed Palisade Fence with Razor Wire for High Security Applications Steel Palisade Panels The palisade panels are constructed with triple pointed or spear top posts, top rails, razor spikes, bottom rails and accessories. Modular W section steel palisade panels of pales, posts, rails Modular palisade fence panel with frame post, bottom rail and top rail bolt fixing Spear top fence panels of pales, posts and rails Modular palisade panel fixed with horizontal rails bolted at medium position of the panel height Tubular Fencing Posts Corner posts must be installed at a 45 deg angle. Two 40 x 40mm taps with a 14mm hole must be welded, at 45 deg, 860mm from the bottom and 2700mm from the bottom on the inside flange of the corner post. Four M 12 x 40 mm bolts with hex nuts and washers must be used to secure the panels to the post. A 40 x 40 mm tap with a 14mm hole must be welded 525mm from the bottom, on the inside flange of the corner post, for the earth tail connection. There will be occasions when the Posts will be surface mounted and in these instances the Post shall be only 2400mm long having a 200mm x 200mm x 6mm Base Plate fully welded to the Post. The Base plate shall have Four 14mm Diameter holes positioned at 140mm centres at each corner of the Base Plate. The Post shall be secured by means of Four 12mm Stainless Steel Chemical Anchors. Palisade Panels.(Refer to figure 6) Three normal panel sizes options: 825 x 2350 mm, 1200 x 2350 mm and 2100 x 2350 panels. Fittings for fixing the panels: hot dip galvanised cap square bolts, hex nuts and washers, stainless cap square bolts and hex nuts and washers. Top Rails. (Refer to figure 6) Material: 50mm x 50mm x 5mm angle iron. At the end of the rail a 13mm hole must be drilled through the centre for M12 mounting bolts. Razor spikes must be fitted to top rails by means of 6 mm pre-drilled holes (before galvanising) and secured with 4.8 mm full stainless steel pop rivets. Top Rail Security Spikes. Industrial standard high security spikes shall be used.

We produce steel wire mesh in China for 20 years. Please feel free to contact me.

Minimum Order: 1 bags

Locomotora minera de 8 toneladas alimentada por batería La locomotora eléctrica a batería es un tipo de equipo de tracción de vías alimentado por baterías, que generalmente se utiliza en minas. Hay dos tipos de locomotoras eléctricas a batería, el tipo a prueba de explosiones y el tipo ordinario. El tipo a prueba de explosiones se utiliza principalmente en minas de carbón. También hay muchas opciones en términos de regulación de velocidad y métodos de frenado. Los métodos de control de velocidad incluyen control de velocidad de resistencia, control de velocidad de corte y control de velocidad de conversión de frecuencia. Los métodos de frenado incluyen frenado mecánico puro, frenado hidráulico y frenado de aire comprimido. Además, el frenado eléctrico también se puede seleccionar como método de frenado auxiliar. Peso adhesivo / total (t): 8 toneladas Ancho de vía (mm): 500.600.762.900 Tracción (KN): 11,18 o 12,83 Máx. Tracción (KN): 19,62 Velocidad (km/h): 6,2~7,8 Voltaje de la batería (V): 110~140 V Capacidad de la batería (Ah): 440 Potencia (KW): 11 o 15 KWx2 Dimensiones Longitud (mm): 4420 Ancho (mm): 920, 1082 o 1220 Altura (mm): 1600 Distancia entre ejes (mm): 1100 Diámetro de la rueda (mm): 680 Radio de curva mínimo (m): 7 Controlador: Resistencia o IGBT Método de frenado: Freno mecánico o neumático Ventajas de nuestro producto 1. El uso de placas de acero de alta calidad y un proceso especial de eliminación de óxido garantizan una mayor resistencia a la corrosión y son adecuados para entornos mineros hostiles. 2. La producción de motores por nuestra cuenta, utilizando material de aislamiento de alta palanca y cobre puro, garantiza una potente fuerza de tracción y es adecuado para entornos mineros hostiles. 3. La superficie de anastomosis de los engranajes alcanza más del 80 %, lo que supera con creces el estándar. 4. El marco diseñado y ajustado profesionalmente garantiza una conducción segura y evita caídas de los rieles. 5. Se puede elegir una variedad de métodos de frenado, freno de aire, freno hidráulico, freno eléctrico, freno mecánico para garantizar la conducción segura. 6. 40 años de rica experiencia con la capacidad de diseñar y fabricar productos personalizados de acuerdo con sus requisitos. 7. Prueba de fábrica en línea: visita Prueba de locomotora minera 1. Antes de poner en marcha la locomotora, realice la depuración de los engranajes, la iluminación, los engranajes y el ajuste de los frenos, etc. para garantizar el funcionamiento normal de la locomotora. 2. Realice una prueba de tracción antes de salir de la fábrica para garantizar que el rendimiento de carga de la locomotora cumpla con el estándar. Nuestros estándares de diseño generalmente superan el estándar nacional en un 10%-20%. 3. Realice diferentes tipos de pruebas de funcionamiento antes de salir de la fábrica para garantizar el rendimiento y el funcionamiento normal de toda la locomotora. Puede adaptarse a diversas condiciones duras en condiciones de trabajo simuladas. Prueba del motor El motor tiene que pasar por muchos procedimientos de inspección antes de salir de la fábrica, y cada motor tiene que realizarse con experimentos de funcionamiento con carga. Los motores a prueba de explosiones se realizan con prueba de presión de agua. Todas las pruebas del motor son para garantizar que pueda adaptarse a condiciones de trabajo duras. Casos 1. Un buen comentario de un cliente de América Latina sobre nuestra locomotora de batería de litio 2. Para resolver los problemas existentes de las baterías de plomo-ácido, más de 30 locomotoras eléctricas de batería de plomo-ácido en esta gran minería se cambiaron a locomotoras eléctricas de batería de litio, lo que mejoró el entusiasmo laboral y la eficiencia de producción de los empleados, redujo los costos y es más amigable con el medio ambiente. 3. El carro perforador de roca para minería diseñado por Sunward Co. tiene un tamaño pequeño y una estructura simple, por lo que el espacio para colocar la batería de litio en la carrocería es muy limitado. De acuerdo con el tamaño limitado, nuestra empresa diseñó un plan de energía de suministro de energía de litio, que resuelve perfectamente el problema del espacio de suministro de energía de litio. Para adaptarse al entorno industrial y minero especial y mejorar la eficiencia del transporte, se diseñó un lote de locomotoras eléctricas de batería de litio de 2,5 toneladas para los clientes de Myanmar. Preguntas frecuentes ¿Cuáles son las ventajas de su producto? Contamos con más de 40 años de experiencia en este campo, por lo que podemos diseñar o producir la locomotora según sus necesidades. También podemos ofrecerle un servicio en línea para enseñarle cómo operar y mantener la locomotora. Lo más importante es que producimos la parte principal de la locomotora: los motores de tracción. Podemos garantizar la potencia de la locomotora. 1. Servicio de preventa: La amplia gama de productos nos permite proporcionar a nuestros clientes máquinas individuales o plantas de procesamiento completas. Según los pedidos y el presupuesto de nuestros clientes, nuestros expertos crean soluciones eficientes y confiables, y producimos siguiendo estrictamente los pedidos de los clientes. Además, cada cliente tiene la oportunidad de visitar la máquina en funcionamiento en el sitio antes de realizar el pedido. 2. Servicio posventa: La orientación de técnicos experimentados está disponible por teléfono y en Internet. Se enviarán uno o más ingenieros a la cantera para ayudar a instalar las plantas del cliente. También se brinda la capacitación necesaria sobre el mantenimiento diario de la máquina a los trabajadores locales. 3. Métodos de pago: T/T (transferencia telegráfica) o Western Union o L/C a la vista Tiempo de procesamiento de un pedido: En un plazo de 10 días desde el stock 4. Método de envío: Pedido de muestra: sugerimos mensajería urgente como DHL/UPS/TNT/FEDEX o por aire Pedido al por mayor: sugerimos por aire o por mar. 5. Control de calidad: Contamos con nuestro propio control de calidad experimentado. Se realizarán inspecciones y pruebas estrictas para cada pedido antes del envío. 6. Servicios posventa: a. Nuestro equipo de ventas responderá a su pregunta dentro de las 24 horas (no se incluyen los días festivos) b. El soporte técnico estará disponible en cualquier momento c. Se proporcionará un reemplazo gratuito una vez que se confirme la falla causada por la calidad de nuestro producto

Minimum Order: 1 bags

Dear Sir, We are a leading Gold Bars Supplier 22+ Carat & 96% Purity and 23 Carat & 98% Purity Gold from Ghana. We have in stock large Quantity of Gold Bars ,Au Dust & Uncut Diamonds, for sale interested to buy can contact for us, sds.marinee@gmail.com WhatsApp +233595675308 thanks Mr.Raymond Atta

Minimum Order: 200

Concrete Reinforcing Mesh Essential For Construction Projects Concrete reinforcing mesh, also known as reinforcing welded mesh, is made of carbon steel or stainless steel and comes in rectangular and square shapes. Its strong structure and high tensile strength improve its bond with concrete and reduce cracking. This mesh is commonly used to reinforce building foundations, roads, and bridge decks. Reinforcing bar supports and tie wires are essential for securing the mesh in concrete structures. Concrete Reinforcing Mesh Concrete reinforcing mesh is made from metal rods ranging from 3 mm to 40 mm in diameter, bonded perpendicularly by spot welding for strong connections. This versatile mesh is used in various construction projects, including concrete footpaths, industrial and commercial slabs, precast panels, and residential foundations. It typically features ribbed steel rods to improve concrete bonding and minimize cracking. Smooth steel mesh is also available for specific project needs.