Minerals & Metals

Stainless Steel Sintered Mesh Element Features Uniform,accurately and stability filtering; Good permeability and strength; High temperature resistance,corrosion resistance; Easy cleaning; No immigration of materials. Technical Filtration rate:0.5-200; Work Temperature:-50℃-800℃； Size:14-800mm OD,10-1200mm Length Hanke Filter can be customized.

tungsten crucible Advantages: 1. High density 2. High strength 3. Withgood weld-ability and process-ability 4. Low thermal expansion 5. Anti-erosion Specifications 1. Tungsten Crucibles 2. Grade: W1, W2, W3, W4 3. Density:17.8g/cm3 4. Chemical Composition: tungsten>=99.95% 5. Appearance: Silver gray metallic luster 6. High: max500mm, bottom thickness:min15mm, Tolerance:±0.5mm 7. Smooth degree: Ra≤3.2 8. Using temperature: Within 2000°C 9. Standard: ASTM GB 10. Tungsten Crucible and Molybdenum Crucible are used in growing sapphire, crystal and rare earths industry. 11. Quantitative analysis Element Ni Mg Fe Pb Al Bi Si Mo Concentration 0.001 0.0005 0.002 0.0001 0.0005 0.0001 0.001 0.002 Element C O N Sb Cu Ca P Concentration 0.001 0.003 0.0006 0.0006 0.0006 0.0005 0.001 12. Sintered tungsten crucible Sintered with tungsten powder the sintered tungsten crucibles are multi-purpose production in sintering furnace, large crystal growth furnace. Thickness of sintered tungsten crucibles is usually 8-12 mm; diameter is typically 100-550 mm; height is typically 50-700 mm. Such crucible Purity: W ≥ 99.95%; density is usually up 18.2g/cm3, by special needs the density can up 18.8g/cm3 or more. 13. Features: 1. The overall density of sintered tungsten crucible is fairy high between 18g/cm3 to 18.3g/cm3; 2. Its chemical purity of sintered tungsten crucible can be above 99.95%; 3. The diameter of sintered tungsten crucible can be above 200mm; 4. The surface roughness of tooled crucibles does not exceed Rz 6.3; 5. The use temperature of sintered tungsten crucible should be below 2450ºC in vacuum or deoxidize atmosphere. 6. The shapes and dimensions of crucibles are also made in accordance with customers' requirements. 14. Stamped tungsten crucible The tungsten crucibles can be produced of a tungsten plate by stamping, spinning, or welding. It can be used to produce single-use square or round crucible. Thickness typically 0.5 to 3 mm. Such tungsten crucible Purity: W ≥99.95%; density is usually up 19g/cm3 15. Forged tungsten crucible The tungsten crucible can be made of tungsten rod by turning , generally they are smaller and with higher density. Usually the wall thickness 3-10 mm; diameter of 80 mm. They are widely used by sintering furnaces for ceramics and other materials or vacuum evaporation coating machine. Purity: W ≥ 99.95%; density are usually based on different diameters of up to 18.3 to 19g/cm3 16. Notice: 1. Before use, it is recommended that the consumer anneal (de-gas) crucibles in a vacuum without batch charging; 2. In a furnace, the annulment process should be supported with a vacuum at P< 10-3mmhg; 3. When preparing a sintered tungsten crucible for work, the consumer should not allow a sharp rise or fall in temperature, or abbreviate the recommended time periods for holding temperatures. Applications Tungsten crucible is mainly used used for rare earth,sapphire single crystal growth furnace , quartz glass, Metal extracting, metallurgical industry, machinery processing, glass and ceramic industries, etc.

Minimum Order: 1 bags

Tungsten Disk Quick Details • Place of Origin: Henan, China (Mainland) • Brand Name: KEKAI • Model Number:W1-99.95% • Thickness:20mm • Width:150mm • material: tungsten • chemical composition: tungsten • purity:>99.95% min • appearance: Silver gray metallic luster • density:19.2g/cm3 • color: polished tungsten disk • Dia.:10-200mm • length:20-500mm • certification:ISO9001 • tolerance:+-0.5mm Packaging & Delivery Packaging Details: plastic inside and wooden case outside Delivery Detail: 7-15days Tungsten disk 1. China supplier tungsten disk 2. Density : > 19.2 g/cm3 3. Tungsten content :> 99.98% 4. Grades: various 5. Factory and manufacture Specifications: 1. Tungsten plate Appearance: Black or polished, hot roll or cold roll 2. Dimension: Supplied according to the needs of users: (0.05-40)*(20- 600)*L L<2000mm 3. Tungsten plate applications: Tungsten alloy products is a good use industry material, military industry, it is a very important doping material widely used for the following 1.) Arcing contacts and vacuum contacts in high and medium voltage breakers or vacuum interrupt; 2.) Electrodes in spark erosion cutting machines; 3.) Heat sinks as passive cooling elements of electronic devices. 4. More details about tungsten disk: As-rolled Surface Finish Ground Surface Finish Minimum Thickness 0.125”+/-0.020” Minimum Thickness 0.125”+/-0.005” Maximum Width 12” Maximum Width 12” Maximum Length 24” Maximum Length 24” Maximum Thickness 0.400”+/-0.030” Maximum Thickness 0.400”+/-0.005” Maximum Width 12” Maximum Width 12” Maximum Length 12” Maximum Length 12” 5. Application: Tungsten Disk mainly used as contactor materials for vacuum circuit breaker and the fusions of thyristors, as contactor materials for vacuum circuit breaker and the fusions of them. 6. Furnished Forms: (1)The products of thickness below 1.0mm are supplied in raming state; the products of thickness over 1.0mm are supplied in lathed state. (2)If customers require, the product of blasted and ground on either one or both sides can be supplied.

Minimum Order: 1 bags

Tungsten wire Quick Details Place of Origin: Henan, China (Mainland) Brand Name: Kekai Model Number: W1 Wire Gauge:0.01- 2mm Material: tungsten Chemical composition: tungsten Purity: >99.95% Applications: special applications Appearance: coiled Dia.: 0.01-2.00mm Density: 19.2g/cm3 Melting Point: 3410 Celsius Boiling Point: 5927 Celsius Surface: Black and Cleaned .Packaging & Delivery Packaging Details: plastic inside and wooden case outside Delivery Detail: 7-15days 1. Tungsten wire tungsten Filament: tungsten wire in spool Model NO.: KK Type: Tungsten Wire Material: W-1 Purity: 99.95%Min. Melting Point: 3410 Ceiclus Boiling Point: 5927 Ceiclus Density: 19.2g/cm3 Diameter: 0.01-2.00mm Surface: Black and Cleaned Export Markets: Global 2. Dimensions and Tolerances of tungsten wire: Tungsten wires diameters are generally expressed in terms of inches or mils (thousandths of an inch). For thin wires from. 001 inches up to. 020 inches in diameter, the diameter of the wire is measured by weight per unit length. That is, the weight expressed in mg of a 200 mm length of wire. The standard diameter tolerance is: ± 3% of the weight measurement. Closer tolerances are available, depending upon the application for the wire product. Specification: Diameter, mm Difference between 2 feet, mm Inside diameter tolerance, mm Big heater element Small heater element 0.4-3.0 ±1 ±0.3 0.4-1.0 ±1 ±0.3 0.4-1.3 ±1 ±0.3 0.4-1.0 ±2 ±1 ±0.3 0.4-1.0 ±1 ±0.3 0.4-1.0 several stranded coils ±0.3 Note: Different diameter and length are available for your 99.95% pure stranded tungsten wire. 3. Straightness of tungsten wire: Wire may be finished in the unstraightened or as drawn condition and is controlled to Bango's internal standards, In addition, wire can be straightened via mechanical or heat treating processes. Typically, the measure of the straightness of a tungsten wire is obtained by cutting a ten inch long piece of wire and allowing it to lie on a flat clean surface. The maximum deviation from a straight line along its length is the quantitative measure of its straightness. In general, as the degree of straightness increases, tensile strength decreases. 4. Quality and Finish: Wire is free of scratches, kinks and distortions insofar as they are harmful to the intended end use of the product. Surface finish is supplied in the black, as drawn condition, where drawing lubricants and oxides are retained on the surface, or in the cleaned condition by firing in hydrogen or electrochemical etching. 5. Products Feature: 1. Excellent Conductivity 2. Resistance of high temperature. 3. Abrasion and Erosion. 4. Suitable for making heating wires. 5. Twisted wires for coating films under vacuum and for tungsten wires in electrical light sources usage. 6. Application: Tungsten is widely used as refractory metals. In wire form, tungsten wire is essential for the production of lighting products and other goods where its high temperature properties are of use. Among its properties are a melting point of 3410° C, a low coefficient of thermal expansion and low vapor pressure at elevated temperatures along with good electrical and thermal conductivity. The important applications of tungsten wire are for the production of coiled incandescent lamp filaments, cathode and support structures for power tubes, heating elements for high temperature furnaces and evaporation sources in metallizing processes. Thicker sizes of tungsten wire, straightened, finish- ground and cut into rod pieces are widely used for glass-to-metal seal lead parts in the lighting and electronic industries. 7. Technical process: Tungsten Powder → Isostatic Pressing → Bar Billet →Sintering → Semi- finished bar →Forging→ Swaging → Drawbench → End products → Inspection → Packing 8. Package: 1. Sealed plastic bags to prevent oxidation during transportation and storage. 2. Carton box or plywood case outside. Customers' special request is available for 99.95% pure stranded tungsten wire.

Minimum Order: 1 bags

Tungsten rod Quick Details • Place of Origin: Henan, China (Mainland) • Brand Name: Kekai • Model Number: KK-S • Dimensions: as required • color: black or silver gray • size: customized • application: industrial/solar • packing: plywood case or as required • material: pure tungsten and alloy tungsten • characteristic: high quality, workability Packaging & Delivery Packaging Details: plywood case or as required Delivery Detail: 7-20 days 1. Grade: W1, W2, WAL, WLa, WNiFe 2. Purity :> =99.95% 3. Characteristic: Melting Point: 3410 Degrees Celsius Boiling Point: 5927 Degrees Celsius Density: 19.3g/cm3 High quality, workability 4. Certificate: ISO9001:2008 5. Product Feature: High melting point, High-density, high temperature oxidation resistance, long service life, resistance to corrosion.. 6. Dimensions and tolerance (According to clients’ requirements): Tungsten content Type Diameter (mm) Dia. tolerance (mm) Length (mm) L tolerance (mm) 99.95% Sintering rod 40-100 ±3 500max ±5 Forged rod 20-80 ±2 800max ±5 Ground rod 2-60 ±0.1 650max ±1 Other element content≤ Fe 0.001 Al 0.0001 Bi 0.0001 Si 0.001 Ca 0.001 Ni 0.00035 Mo 0.0008 O 0.0047 P 0.001 N 0.002 Mg 0.0001 Pb 0.0001 Sn 0.0001 Sb 0.0001 C 0.00085 As 0.0001 7. Application: Tungsten rod/bar can be widely used in illumination, heater and the electronic mechanical engineering, making the electricity photo source, the automobile and the tractor light bulb, make lattice side rod, framework, leading wire, electrode, heater and contact materials and so on.

Minimum Order: 1 bags

Tungsten plate Owning two hot rolling machine and five cold rolling machines, we can supply tungsten and molybdenum sheet thickness of 0.05mm to 20mm.With very good performance, these products are used to produce electrode, heater ,heat-shield ,sputter target, crucible in electronic, vacuum furnace application. 1. Grade: W1, W2, WAL, WLa, WNiFe 2. Purity :> =99.95% 3. Characteristic: Melting Point: 3410 Degrees Celsius Boiling Point: 5927 Degrees Celsius Density: 19.3g/cm3 High quality, workability 4. Certificate: ISO9001:2008 5. Product Feature: High melting point, High-density, high temperature oxidation resistance, long service life, resistance to corrosion.. 6. Dimensions and tolerance (According to clients’ requirements): Tungsten Thickness Width Length Plate 0.5 ~ 10mm 50 ~ 800mm 50 ~ 2000mm Sheet 0.1 ~ 0.5mm 30 ~ 400mm 30 ~ 1000mm Other element content≤ Fe 0.001 Al 0.0001 Bi 0.0001 Si 0.001 Ca 0.001 Ni 0.00035 Mo 0.0008 O 0.0047 P 0.001 N 0.002 Mg 0.0001 Pb 0.0001 Sn 0.0001 Sb 0.0001 C 0.00085 As 0.0001 7. Application: 7.1. used as the stell-making additive 7.2. for producing tungsten targets 7.3. for producing ion implantation parts 7.4. for rolling tungsten foil and punching tungsten discs 7.5. for producing electric light source parts and electric vacuum components 7.6. for producing heating elements and refractors in high temperature furnaces 7.7. for producing W-boats, and heating units in high temperature furnaces 8. Technical process: Tungsten Powder → Isostatic Pressing → Bar Billet →Sinering → Semi-finished bar →Forging→ Swaging → Polished → End products → Inspection → Packing

Minimum Order: 1 bags

Hot product mo-1 pressed-sintered molybdenum crucible price 1. Specifications: Can process all kinds of sintering crucibles, machining crucibles and tubes according to the request of customers. Diameter(mm) Height(mm) Wall Thickness(mm) <80 ±1.5 <100 ±1.5 <6 ±0.8 >80-150 ±2.0 >100-200 ±2.0 >6-10 ±1.3 >150-270 ±2.5 >200-300 ±2.5 >10-15 ±2.0 >270-380 ±3.0 >300 ±3.0 >15-20 ±2.5 >380 ±3.5 >300 ±3.0 >20 ±3.0 2. Surface Treatment: Annealed State, Electrolytic Polish 3. Application: Mainly used in metallurgical industry, machinery processing, glass and ceramic industries, as containers for coating materials. Because of molybdenum and molybdenum alloy material with high temperature, low pollution features, molybdenum crucible is widely used as LED industry ruby and sapphire crystal growth, rare earth smelting in the field of such as special high temperature resistant containers. 4. Advantage of our Mo crucible - uniform grain with densified microstructure ensures longer use time. - High special strength, high melting point - Excellent corrosive resistance, good thermal resistance. - Professional after-sales service

Minimum Order: 1 bags

Molybdenum Heat Shield: As thermal insulation components, molybdenum heat shield and molybdenum covers play a important role for heat blocking and reflecting in sapphire growth furnace. A high purity, precisely sized, smoothly clean, easy assembly and appropriately designed heat shield is significant for crystal pulling quality. As the heat-shield parts in the sapphire growth furnace, the most decisive function of molybdenum reflection shield is to prevent and reflect the heat in the furnace. Heat-shield parts with high-density, exact-measurement, smooth- surface, convenient-assembly and reasonable-design has great significance in improving the crystal-pulling. molybdenum heat shield Dimension (mm): Molybdenum Cover Plates Molybdenum Heat Shield/ Single sheet Sheet Thickness Dia (Max) Sheet Thickness Dia(Max) Height(Max) 2.0±0.1 660±0.2 2.0±0.1 450±2 660±1 1.0±0.08 660±0.2 1.0±0.08 610±2 660±1 0.5±0.04 660±0.2 0.5±0.04 700±2 660±1 0.3±0.03 660±0.2 0.3±0.03 700±2 660±1 molybdenum heat shield processes and quality control: No. Processes Equipment Quality 1 Molybdenum sheet 1.Physical and chemical properties accordance with customer’s specification 2.Correct size 3.Clean surface, no defect. 2 Inspection 3 Roll bending Asymmetric three-rollers plate bending machine Correct barrel height and diameter 4 Drilling and riveting CNC milling machine, bench driller Firmly riveting 5 Cleaning Surface clean and no defect 6 Inspection Correctly positioned assembly holes 7 Assembling Clean surface 8 Cleaning Correct barrel height and diameter 9 Inspection Firm assembly, no bond between layers 10 Packing Firm wooden case within quality certificate

Minimum Order: 1 bags

Specifications 1. Product name: Molybdenum electrodes 2.Material: Mo 3. high purity: 99.95% 4. Density: 10.2g/cc 5. Application: sapphire furnace, glass melting polished/ground moly electrode: Molybdenum electrode is electrodes made of material – molybdenum, by applying its unique advantages—temperature resistance, continuous surface, stable edges good electrical conductivity, excellent corrosion-resistance -- to improve its entire quality and using age. Molybdenum electrode is silver gray metallic luster. It is isostatic pressed to forge to various types after sintering with medium frequency furnace and then turning, rolling, planning and milling. Meanwhile, the quality is unchanged, which can be seen from external and internal aspects, such as no lose side, no lose corner, and no crackle and divide layer. Thus, the surface of the molybdenum electrode is smooth and compact. Molybdenum electrode can be used for glass industry,andwork in the glass solution with the temperature of 1300°C. Molybdenum electrode is used as electro-heat equipment of the glass fiber kiln. It is an important part in rare earth industry. Its density is more than or equal to 10g/m3, and its purity can reach 99.5%. Molybdenum electrode: Dia.(mm) Tolerance Length(mm) Tolerance 16-20 +1.0 300-1500 +2 20-30 +1.5 250-1500 +2 30-45 +1.5 200-1500 +2 45-60 +2.0 250-1300 +3 60-100 +3.0 250-800 +3 It`s mainly used for metallurgy and machinery industry. Other sizes and special requests are available Mo has a unique property of which it's melting point can reach 2610 tungsten crucible is widely applied in high temperature vacuum furnace melting environment such as sapphire growing furnace, quartz glass melting furnace, and rare earth melting furnace. The working temperature of Mo sheet is above 1500. The melting process of the raw material for wool and fiber production is always by electrical heating with electrode, especially designed plate and Rod electrodes are generally used. We can provide stable quality Mo material with plate and Rod electrodes based on uniform density, purity and fine metal grain strength property. For glass melting application, high-purity, high-density, with other features of exact measurement and smooth surface has decisive influence on the success of quality control of glass melting and service life during meltng process. Composition: Grade The impurity content is not more than % Fe Ni Al Si Mg C N O Mo-1 0.01 0.005 0.002 0.01 0.005 0.01 0.003 0.008 Mo-2 0.01 0.005 0.005 0.01 0.005 0.01 0.003 0.02

Minimum Order: 1 bags

OEM AlSi12 Die Cast Case Aluminium Communication Equipment Parts Best price customizable Precision die cast case die cast aluminium communication equipment parts We have obtained the certification of many international standard systems such as IS9001, ISO/TS16949, EICC, and Dun & Bradstreet certification. Benky is a country-level high-new tech demonstration enterprise, and it has about 30 patents. Our plant occupies a floor area of 30,000 m2, and we have 500 well-trained employees and 40 research staff. Our annual capacity of die cast is 30,000 tons and our annual capacity of molds has exceeded 300 sets. We have more than 40 die-casting machines ranging from 280T to 4000T, and the largest casting weight can be 50KG. We also have more than 200 CNC machining centers. Product Description: Product Name: Customized Aluminum Casting Parts for Telecommunication Devices Material: AlSi12 (Fe)(Aluminum alloy) Machine Application: 1250T Size 425*219*66mm Product Characteristics: Ultra-thin heat sink,High thermal conductivity,High internal quality requirements Casting Method High Pressure die casting (oxygenate pressure casting) Processing Method CNC Machining Package Carton

Product Description AISI 904L Hot Rolled Stainless Steel Round Bar for Chemical 904l Stainless Steel Round Bar is an austenitic grade alloy. If compared to alloy grade 316l, the addition of molybdenum content in the alloy of Stainless Steel 904L Square Bar gives it superior resistance to localized assault such as pitting as well as crevice corrosion. In fact, the Stainless Steel 904L Bar proves to be a rather useful resource in terms of its resistance against chlorides while proving to offer additional resistance to reducing acids. Specifications Sheet​ Item Stainless Steel Bar / Rod Steel grade 200 series 300 series 400 series 600 series 900 series Standard ASTM A213,A312,ASTM A269,ASTM A778,ASTM A789,DIN 17456, DIN17457,DIN 17459,JIS G3459,JIS G3463,GOST9941,EN10216, BS3605, GB13296 Material 201 202 203 204 301 302 303 303se 304 304L 304N1 304N2 304LN 305 309 309S 310 310S 316 316L 316N 316J1 316J1L 317 317L 317J1 321 347 XM7 XM15J1 329J1 405 408 409 410 416 420 430 430F 434 447J1 403 410L 405 410J1 420J1 420J2 420F 431 440 440A 440B 440C 440F 630 631 632 904 904L Surface BA/2B/NO.1/NO.3/NO.4/8K/HL/2D/1 , D Type hot rolled and cold rolled stainless steel plate Size Diameter 1mm-1500mm Length< , br>100mm-6000mm Trade terms Price terms FOB,CIF,CFR,CNF,Ex-work Payment terms T/T,L/C,westen union Delivery time Prompt delivery or as the order quantity. Export to Ireland,Singapore,Indonesia,Ukraine,Saudi Arabia,Spain,Canada,USA, Brazil,Thailand,Korea, , Italy,India,Egypt,Oman,Malaysia,Kuwait,Canada, Viet Nam, Peru,Mexico,Dubai, Russia,etc Package Standard export seaworthy package,or as required. Application Widely used in petroleum,foodstuff,chemical industry,construction, electric power,nuclear,energy,machinery,biotechnology,p , aper making,shipbuilding,boiler fields. Pipes also can be made according to the customer's required. Contact If you have any questions,please feel free to contact me. Container size 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 24-26CBM 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 54CBM 40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) 68CBM

g Point: 2610 Degrees Celsius 2) Density: 10.2g/cm3 3) High quality, workability 4. Certificate: GB/T9001:2008 / ISO9001:2008/ 5. Product Feature: High melting point, High-density, high temperature oxidation resistance, long service life, resistance to corrosion. 6. Dimensions and tolerance (According to clients’ requirements): Grade Mo-1 Grade Mo-1 The impurity content is not more than % Pb -- The impurity content is not more than % Si 0.003 Bi -- Ca 0.002 Sn -- Mg 0.002 Sb -- P 0.001 Cd -- C 0.020 Fe 0.006 O 0.003 Ni 0.003 N 0.003 Al 0.002 -- -- Application: Molybdenum wire, moly wire, spray wire is mainly used for auto parts spraying, such as piston ring, synchronizer rings, shift elements, etc. Molybdenum spray wire is also used in repairs of machine parts, such as bearing, bearing shells, shafts, etc. Furthermore, molybdenum spray wire is applied as an intermediate layer. With more than10 years experience in metal wire, we can supply the accustomed dimension such as dia.3.17mm, 2.31mm, 1.6mm and 1.45mm, etc. The reel weight of heavy molybdenum wire without welding can reach 25kg. Package: coils wrapped with waterproof paper with carton box outside.

Minimum Order: 1 bags

According to your request,each size can be selected for different application.Please contact us! Product name PPGI / PPGL Coils , we can also do sheets and strips Length 6-12m or According To Customer's Demends Width 600mm-1500mm,according to customer's requirement Thickness 0.12-6.00mm,or customer's requirement Special pattern Wrinkled/Grass/Wooden/FlowerTextured/Ma , tt/Metallic effect/Embossed Advantages 1.low foundation cost 2.easy construction 3.time and labor saving Standard PPGI:JIS G3303,GB/T 12754-1991; PPGL:ASTM A755/M,JIS G3322 Surface treatment Chromated and oiled, and ant-ifinger Base material GI,GL/AZ,EG,CR Coating type PE, PVDF, SMP, PU, etc. MOQ 1 ton , We can accept sample order. Shipment Time Within 7-15 workdays after receiving deposit or L/C Export Packing Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity 25000 tons/month

Description: 1. Product name: Molybdenum plate 2. Standard: ASTM B386 or as required 3. Material: Mo >99.95% 4. Density: >10.2g/cc 5. Tensile strength: 610MPa 6. Elongation: > =10% 7. Using temperature: 1800℃, max temperature: 2310℃ Application: Molybdenum plate is used for making electric light source parts, components of electric vacuum and electric power semiconductor. It is also used for producing molybdenum boats, heat shield and heat bodies in high temperature furnace. It is widely used in furnace construction mould and parts, electronic components manufacturing and semiconductor industry. In vacuum furnace and high temperature furnace and heat preservation material plate electrode, etc. Specification: Specification: (0.2-90) mm*max 760mm*max10m We produce high quality molybdenum sheet as one of our hot product. We offer 3,000-5,000 kg molybdenum sheets per month and small order is also acceptable. Surface Condition: Surface can be supplied in a shiny, matte, satin, or as-rolled condition; dependent upon thickness and width parameters. Heat treatment: Molybdenum flat products are rolled and annealed to provide the optimum condition for the desired end use. Length(mm) Tolerance(mm) <6 ±0.1 6-30 ±0.2 30-120 ±0.3 120-400 ±0.5 400-1000 ±0.8 Composition: Brand Mo-1 Mo (%) 99.95 Other Element Content (%) ≤ Pb — Bi — Sn — Sd — Cd — Fe 0.005 Ni 0.002 Al 0.002 Si 0.003 Ca 0.002 Mg 0.001 P 0.001 C 0.005 O 0.003 N 0.001

Minimum Order: 1 bags