Minerals & Metals

Jinitan's end feed copper fittings for plumbing and ACR systems have been at the leading manufacturer of copper fittings in China. Available in both ASME B 16.22 and EN 1254-1 Standard, our end feed fittings can be used in both residential, commercial and HVAC systems. Available I.D.sizes ranging from ¼" to 6". Our company, a leading specialist in quality accessories, has received various certifications in many markets such as WRAS, KITEMARK, AENOR, SABS, UPC, CUPC, NSF, NF, WATERMARK, and so on. We are very specialized in the production of copper end feed fittings. If you need it, please contact us. Copper End feed fittings Advantages Easy to install Safe and reliable High temperature and high pressure resistance High cleanliness Jintian copper, as an excellent copper busbar supplier, offers a wide range of copper tube for you to choose from.

Minimum Order: 2 barrels

The electrical round copper rod wire products produced by our company are widely used in industries such as transposed conductors, ultra-high voltage cables, various types of wires and cables, various types of enameled wires, network wires, electronic wires and communication wires. Bare Copper Wire (8mm) Performance Advantages Bright surface without burrs Superior performance and quality Can meet your technical requirements for drawing fine lines, fine lines and special products Jintian group is a professional brass plate company, we provide brass bibcock valve, copper tube, end feed fittings, etc. For more information, please feel free to contact us!

Minimum Order: 2 barrels

As an important material, enamel coated copper wire is a main variety of winding wire, which consists of conductor and insulating layer. After the bare copper wire is softened by annealing, it is painted and baked many times. It has been widely used in the motors, transformers, compressors and other industries as well as new energy vehicles, rail transit, wind power, smart home and other fields. To satisfy different requirements of those fields, it divides into various kinds of specification, such as Self-Solderable Polyurethane Series, Nylon Overcoating Series, Polyester Series, Polyester-imide Over coated with Polyamide-imide, Polyester-imide Series, Corona-resistant Enameled Wires Used for Inverter-fed Motors, etc,. In the coming days, the rapid development of modern industry promotes bright future, but also posts great challenge and higher requirements on technique. As a good and responsable enamel coil wire supplier, our company produces various types of enameled wire. If you are interested in any enameled wire, please contact us. We will negotiate with you at a competitive enameled copper wire price. Types of enamel insulated wire For Sale Magnet Wire for Motor: Magnet Wire for Motor mainly uses QZ,QZY, QA and Q(ZY/XY) . It has good resistance to abrasion and solvent, capable of working under extreme situations where strong resistibility against very high and low temperature. Electric motors are found in numerous diverse applications, such as fans, pumps, machines, household appliances, power tools. Magnet Wire for Compressor: Magnet Wire for Compressor mainly uses Q(ZY/XY)-2/200, which has relatively high requirements on the high ambient temperature requirements in the use of enameled wires and high refrigerant resistance. Generally, in the early stage, the life test needs to be done for half a year and the surface needs to be coated with refrigeration oil. Plate Magnet Wire: Plate Magnet wire is mostly used in winding coils for EV-motor, transformers, motors, generators, and various electrical devices. It has excellent electrical conductivity, thermal stability, scratch resistance, solvent resistance, with advantages of good heat dissipation performance and high magnetic field efficiency when wound into a coil. Magnet Wire for EV: Magnet Wire for EV mainly uses enamel coated magnet wire during the degree of 180—240. Compared with round wire, the benefit of enameled flat wire is no gap and the larger volume efficiency raise to coefficient of space and makes motor miniaturization and high output. The enameled flat wire has a low friction coefficient and good winding property. Jintian group is a professional brass plate company, we provide brass bibcock valve, copper tube, oxygen free copper, etc. For more information, please feel free to contact us!

Minimum Order: 2 barrels

IEC 60317 Enameled Wire The Self-solderable polyurethane enameled copper wire produced by our company is suitable for relays, micro-motors, transformers, instrumentation and various electronic components and winding coils. IEC 60317 Enameled Wire Performance Advantages Can be welded directly, easy to dye Low dielectric loss at high frequencies and good brine hole performance IEC 60317 Enameled Wire Performance Parameter Thermal level Specifications range Standard code level mm AWG IEC GB/T NEMA JIS B 130 0.04-1.6 14#-44#* 60317-4 6109.4 MW75-C C3202 F 155 60317-20 6109.10 MW79-C H 180 60317-51 6109.23 MW82-C C3202 Jintian group is a professional brass plate company, we provide brass bibcock valve, copper tube, copper press fittings, flat enameled copper wire, etc. For more information, please feel free to contact us!

Minimum Order: 2 barrels

Insulated Copper Tube As a big and responsible copper pipe insulation manufacturer, we produced the insulation copper tube is mainly used in the air conditioning and refrigeration industry. If you're looking for a quality copper pipe with insulation, Jintian copper can provide you with the customized standards you need. We're able to meet your order needs for special specifications, as well as black rubber insulation. Insulated Copper Tube Performance Advantages Can provide you with customized standards (up to 50 meters in length) Can meet your order needs for special outer diameter and wall thickness Can meet your needs for black rubber insulation Can provide you with products covered with copper tubes at both ends.

Minimum Order: 2 barrels

Fishing magnet accessories including Fishing Magnet Rope，Fishing Magnet Toolbox，Threadcoker and Fishing Magnet Glove for your needs. Specifications of Different Fishing Magnet Accessories Fishing Magnet Rope Fishing Magnet Toolbox Model Weight (g) 32*26.5*12.5cm 700 Thread locker Volume 10ml Gloves for Magnet Fishing Material Nylon nitrileerial Souwest Magnetech is a professional ferrite magnet supplier, we provide custom magnets, ferrite ring magnet, ferrite arc magnet, hopper magnets, etc. For what rope to use for magnet fishing or more information, please feel free to contact us!

Minimum Order: 1 bags

Fishing magnets are mainly available as the post-powerful neodymium magnets and steel cups with a stainless eyebolt. Types of fishing magnets for sale Double Sided strongest fishing magnet Two directions can hang ropes of the fishing magnet for different uses. Strong Fishing Magnet Fishing magnet with very strong magnetic force and bigger size. The Benefits of Magnet Fishing Magnetic fishing is for anyone, especially those who are motivated to "clean" our waterways. 1. Joyful treasure hunting adventure with fishing magnets. Super strong neodymium magnet can attract all kinds of metal coins, guns, etc., the luck is like opening a blind box. 2. Environmentalists will take fishing magnets to salvage metal garbage to protect our environment. The Benefits of Magnet Fishing FAQ About Fishing Magnets  What equipment is needed for Magnet Fishing? When you want to try magnet fishing for fun at the first time, you need: a “fishing magnet” which made of neodymium magnet, nylon rope which can better for underwater use, gloves, or a grappling hook to help haul heavier items. Souwest Magnetech is a professional fishing magnet companies, we provide custom magnets, ferrite ring magnet, ferrite arc magnet, 200 lb fishing magnet, 1200 lb fishing magnet, 1000 lb fishing magnet, magnetic nd filter, etc. For more information, please feel free to contact us!

Minimum Order: 1 bags

The magnetic core in a pot magnet is ferrite material. High in magnetic strength for lower cost, ferrite pot magnets are ideal for all types of holding, mounting, and fixing applications. Uses of Ferrite Pot Magnets Ceramic pot magnet can be used for corrosion resistance, marine, low cost and higher-temperature applications. ●Booth construction, store construction, interior fittings ●Bath and kitchen installations ●Cabinetry, furniture construction ●Metal construction ●Machine and plant construction Notice of Ferrite Pot Magnet Full adhesion is achieved when the surface of the object to which the magnet is attached is smooth and of sufficient thickness, and when the pot magnet is in perfect flush contact. Pot magnets lose most of their adhesion when they are only half a millimeter away from a ferromagnetic surface. This property is more pronounced with pot magnets than with other ferrite magnets and NdFeB magnets. Flash rust may appear on steel pots when used outdoors, but this does not affect the function of the magnet. If you need any kinds of magnets china, please contact us, as a professional custom magnets supplier, Souwest magnetech is willing to offer you high quality products.

Minimum Order: 1 bags

Ferrite magnets china are permanent magnets made mainly from SrO or BaO and Fe2O3-- They are electrically insulating so current does not pass through them due to their extremely high electrical resistance, hence their other name of Ceramic Magnets. Compared with other permanent magnets, ferrite magnets are hard and brittle, with lower magnetic energy. However, it is not easy to demagnetize and corrode, and the production process is simple and inexpensive. Therefore, ferrite magnets have the highest production volume in the whole magnet industry and are widely used in other industries. What Are The Differences Between Hard Magnets and Soft Magnets of Ferrite Magnets Hard Magnets The ferrite used in permanent magnets is hard ferrite, which has high coactivity and reminisces after magnetization. Iron oxide and barium carbonate or strontium carbonate are used to make hard ferrite. Because of their high coactivity, hard ferrites are not easily demagnetized, which is an important characteristic of permanent magnets. Hard ferrites can produce magnetic flux and also have a high magnetic permeability. Hard ferrites, also known as ceramic magnets, are inexpensive and are commonly used in household products (e.g. refrigerator magnets). Soft Magnets Ferrites used in transformers or electromagnet cores that include nickel; zinc or manganese compounds have a low coactivity and are generally referred to as soft ferrites. The low coactivity means that the magnetization strength of the material can be changed from positive to negative without consuming much energy (hysteresis), and the high resistivity of the material itself reduces another source of energy loss: the generation of eddy currents. Due to the low losses at high frequencies, it is commonly used in the cores of RF transformers and in the reactors used in switching power supplies. FAQs About Ferrite Magnets  What are ferrite magnets used for? Hard ferrites are used to make permanent magnets such as refrigerator magnets, speakers and small electric motors. Soft ferrites have low interactivity, so they easily change magnetization, acting as conductors of magnetic fields. Are ferrite magnets safe? Magnets are incredibly useful and fun, but they also have danger. Ferrite magnets can shatter into pieces if you apply force repeatedly. Fragments of the broken magnet may cause injury to the user or stand. How do you cut a ferrite magnet? Ferrite cannot be cut with ordinary tools. However, it is possible to use the heating ring cutting method. Specifically, a resistance wire is used to form a ring at the prepared cutting point to form a large temperature difference through a large current and then quickly cooled. Souwest Magnetech is a professional ferrite magnet supplier, we provide magnets material, ferrite ring magnet, ferrite arc magnet, ferrite bar magnets, ferrite disc magnets, ferrite block magnet, heavy duty magnetic hooks, etc. For ferrite magnet price or more information, please feel free to contact us!

Minimum Order: 1 bags

Strongest double sided fishing magnet is specifically designed for magnet fishing. You don't have to worry about the orientation of the magnet in the water as each side provides at least 70KG of pulling power. Is a double sided neodymium fishing magnet Better for Magnet Fishing? The new design provides more versatility by allowing it to be used as a double sided, or single side magnet. The eyebolt can screw into the side of the casing, or through the magnet face. Using double sided fishing magnet in the single sided configuration will provide a stronger hold since the user is pulling perpendicular to the target. Structures of double sided fishing magnets for sale Have another eyelet. Made of steel plate. Coated with Ni-Cu-Ni. NdFeB is the strongest and most durable permanent magnet available. If you need any kinds of magnetic products, please contact us, as a professional Magnetic assembly supplier, Souwest magnetech is willing to offer you high quality products.

Minimum Order: 1 bags

A deep pot magnet is a type of pot magnet. The magnet is housed in a cylindrical housing, usually made of galvanized steel or copper-zinc alloy and brass. The deep pot magnets can be glued in, pressed in, or shrunk in. Types of Deep Pot Magnets Deep Pot Magnets SWN0 Deep Pot Magnets SWA1 Deep Pot Magnets SWA3 Deep Pot Magnets SWNP The magnetic core of the deep pot magnets The cores of deep pot magnets are made of neodymium (NdFeB), samarium cobalt (SmCo) or aluminum-nickel-cobalt (Alnico) alloys. Depending on the material used, deep basin magnets have different bonding forces and respond differently to high-temperature requirements. ● Although, Alnico magnets have a good suction force, NdFeB magnets have the strongest suction force. SmCo falls between the other two magnet systems. ● With regard to temperature resistance, the opposite is true. Alnico magnets tolerate the most heat and NdFeB magnets are the least heat resistant. Magnets reach the following maximum operating temperatures: NdFeB 80°C / SmCo 250°C / Alnico 450°C. What do you have to pay attention to when installing deep pot magnets? When installing a deep pot magnet -- it does not matter whether the housing is galvanized or made of brass, but it is important to ensure that it is not directly surrounded by iron. Iron reduces the suction power by 15%. So a gap of a few millimeters between the casing and the surrounding iron needs to be left to solve this problem. The pole side of the deep pot magnets should always be kept clean, which ensures maximum effectiveness when you apply or separate it from the surface. The holding power of the magnets will also be reduced if it is used on an uneven, painted surface. Souwest Magnetech is a professional deep pot magnets factory, we provide magnets material, cylinder magnet ndfeb, rare earth cylinder magnets, heavy duty magnetic hooks, etc. For more information, please feel free to contact us!

Minimum Order: 1 bags

Strong NdFeB cylinder magnets, also called Round Neodymium Magnet, like our other super magnets, are made of a special NdFeB alloy, which allows Cylinder Neodymium Magnet to achieve an extreme adhesive force of up to 200 kg. Their high magnetic strength, resistance to demagnetization, low cost and versatility make them your ideal choice for applications. Advantages About Cylinder Neodymium Magnet ◆ Custom-made ◆ Good value for money ◆ High magnetic properties can reach N55 -- the most strong magnets at room temperature ◆ Maximum outer diameter(OD) can reach 150mm and special grade N35 can reach 200mm OD ◆ Axial magnetization will be cheaper than the radial magnetization ◆ Variety of surface treatments: Protective nickel coating, some with additional gold or copper plating, or epoxy resin coating Tips of cylinder magnets for sale Shipping Sea freight is recommended. As air freight requires magnetic shielding, it will increase the weight cost. Note Dangerous Adhesive force is strong, pay attention to the danger of clamping hands. Souwest Magnetech is a professional magnetic assembly factory, we provide diametrically magnetized cylinder neodymium magnet, cylinder magnet ndfeb, rare earth cylinder magnets, countersunk magnets, etc. For more information, please feel free to contact us!

Minimum Order: 1 bags

The annual output of 300,000 tons of galvanized steel production line is the advanced American GBNB and German Siemens electrical control system. It can produce zero spangles, small spangles, ordinary spangles, etc. The thickness is from 0.125mm to 4.5mm, the width is from 500mm to 1250mm, the zinc coating is from 40-275 g/m², the surface is passivated and oil can be coated. 〣Application making pipes, cutting sheets, making small tools, making corrugated sheets, making container, making fences

Minimum Order: 1 bags

〣Product description Galvanized coil, dip a sheet steel plate into a melted zinc tank, so that the surface adhesion of a zinc sheet steel. It is mainly produced by continuous galvanizing process, that is, the rolled steel plate is continuously dipped in the melting zinc bath to make galvanized steel plate; Alloyed galvanized steel plate. This steel plate is also made by hot dipping, but immediately after it is out of the groove, it is heated to about 500℃ to create an alloy coating of zinc and iron. This galvanized coil has good coating tightness and weldability. 〣Application making pipes, cutting sheets, making small tools, making corrugated sheets, making container, making fences 〣Package Delivery ① Packing 1.Generally package:Anti-water paper+strapped with min three strapping strips. 2.Standard exporting package: Anti-water paper and plastic+covered by iron sheet+ strapped withmin three strapping strips. 3.Excellent package:Anti-water paper and plastic film+ covered by iron sheet+ strapped with minthree strapping strips+fixed on the iron or wooden pallets by strapping strips. ② Shipping 1.Shipping by containers 2.Shipping by bulk ship. 〣FAQ Q1:What are your company's main products? A1: Our main products are Carbon Steel Coil/Sheet,Galvanized Steel Coil/Sheet,Stainless Steel Coil/Sheet, round/square pipe, bar, channel, etc. Q2: How do you control quality? A2: Mill Test Certification is supplied with shipment, Third Party Inspection is available. and we also get ISO,SGS,Alibaba Verified. Q3:What are the advantages of your company? A3: We have many professionals, technical personnel, more competitive prices and best after-dales service than other steel companies. Q4: How to get samples? A4:FREE samples are available for your checking and testing. And to get free samples, you need to send us you detailed receiving address (including post code) and your DHL/FedEx/UPS account for collecting samples, courier cost will be paid in your side.

Minimum Order: 1 bags