Minerals & Metals - Others

RCM Material Teamful sealing rubber coated metal material applied uniformly rubber coating on the surface of base metal steel through a specific production process. It has good heat resistance and long-term durability, as well as a very low compression permanent deformation rate. Compared with traditional non-metallic sealing materials, RCM China, RCM quality has relatively long service life, it is usually used in application for higher pressure, higher temperature and stricter sealing requirements. Why Use Rubber-Coated Metal Material? Metal rubber coating material is a high performance composite material, its advantages mainly include: Adhesive integrity and durability: metal rubber coating material has good adhesive integrity, which can maintain long-term stability in various environments. At the same time, this material also has good durability, could withstand long-term use and the influence of various environmental factors. Excellent bolt load retention performance: metal rubber coating material can maintain excellent load holding performance at the part of bolt connection, making the connection part more stable and reliable. Dimensional stability: metal rubber coating material has good dimensional stability, which will not expand and contract with the change of temperature and humidity. This characteristic makes metal rubber coating material an ideal sealing material and shock absorbing material. Easy to fit flange surface: metal rubber coating material can better fit the flange surface, reducing the processing cost. At the same time, the flexibility of this material is also better, which can adapt to various shapes and sizes of the flange surface. In general, metal rubber coating material has good comprehensive performance, which can maintain good performance in various complex environments, and has a wide range of application prospects. How Is Rubber-Coated Metal Maintained? The storage requirements of rubber involved materials see belows, Storage temperature: the optimal indoor storage temperature of rubber materials should be controlled between 15 °C and 25 °C. Need to avoid high or low temperature warehouse environment, which will lead to aging or solidification of rubber, affecting the quality of rubber. Storage humidity: the storage humidity of rubber materials should be controlled between 60 - 70 percent. Avoid too high or too low humidity environment. If the humidity is too high, it may lead to rubber becoming sticky. If the humidity is too low, it will lead to brittle rubber materials. Storage ventilation requirements: keep a good ventilation environment, avoid moisture and/or heat accumulation, in order to maintain the quality of rubber materials. FAQS FAQs of Rubber-Coated Metal? How to choose rubber coating type? According to the temperature of the application site and the type of sealing medium, the type of rubber coating is selected. The commonly used coatings are divided into fluorine rubber coating and NBR coating. What are the characteristics of fluorine rubber? What are the characteristics of NBR? Can the laser cutting process be used for processing? If you want to know more about a rcm use, please visit our website. As a cummins parts supplier, TEAMFUL SEALING was founded in 1985, focusing on the R & D and production of sealing materials and sealing parts for various industrial fields, especially in Passenger Cars, Commercial Vehicles, Engineering Machinery, Agricultural Machinery, General Powertrain and other industries. The products include sealing materials and parts, noise reduction and heat insulation materials and finished products, heat resistant products, etc.

Non-metallic Gaskets Non Metallic Gasket Material refers to a broad category of different gasket materials that do not contain metal. These materials, which include rubber, silicone, graphite, and PTFE, are known for their flexibility, adaptability, and excellent sealing capabilities. They can be easily cut and shaped to fit a wide range of applications, from automotive and plumbing to industrial machinery. Some non-metallic gasket materials can withstand high temperatures and resist a variety of chemicals, making them a versatile choice for many sealing needs. The lifespan and environmental impact of these gaskets can vary depending on the specific material and application. What Are the Advantages of Non-metallic Custom Gasket Material? Non metallic seal gasket materials offer several advantages. They are highly flexible and adaptable, allowing them to be easily cut and shaped to fit a wide range of applications. This makes them ideal for complex or custom sealing needs. Many non-metallic materials, such as rubber, silicone, and PTFE, have excellent sealing properties and can effectively seal under low bolt load. They also have good resistance to a variety of chemicals and can withstand different temperature ranges, enhancing their versatility. Additionally, non-metallic gaskets are often more cost-effective than their metallic counterparts. Lastly, many non-metallic materials are recyclable or biodegradable, making them a more environmentally friendly option. What Are the Applications of Non-metallic Gasket Material? Non-metallic gasket materials are used in a wide range of applications due to their versatility and adaptability. In the automotive industry, they are used for sealing engines, transmissions, and fuel systems. In plumbing, they are used to create watertight seals in pipes and fittings. In industrial machinery, they are used to prevent leaks and maintain pressure in various systems. They are also used in the electronics industry for insulation and protection. Non- metallic gaskets can be found in appliances, HVAC systems, and even in the food and beverage industry, where they are used to seal containers and machinery to ensure hygiene and prevent contamination. FAQS FAQs of Non-metallic Gasket Material How is Non-metallic Gasket Material made? The manufacturing process varies depending on the specific material. For example, rubber gaskets can be molded, while PTFE gaskets are often cut from sheets. Can Non-metallic Gasket Material withstand high temperatures? How long does Non-metallic Gasket Material last? Is Non-metallic Gasket Material environmentally friendly? As a gasket material company, we can provide kinds of related products for sale, and the gasket material price is reasonable, if you have needs, please contact us. If you want to know more about high pressure gasket material selection, please visit our website. There are many sealing product manufacturers in China, but we are one of the best choices for you.

Non-Asbestos Paper Gasket Non-asbestos Paper Gasket is a cost-effective sealing solution that offers good resistance to liquid mediums and extrusion. It is characterized by its good compressibility and recovery, making it suitable for most low or medium mechanical stress and pressure applications. This type of gasket can be easily reinforced by a silicone rubber sealing bead from the screen printing process, enhancing its sealing capabilities. Its low cost and high performance make it a popular choice in various industries. Features of Non-asbestos Thin Paper Gasket Material Temperature Limitations: They may not perform well under extremely high temperatures. Chemical Resistance: They may not be suitable for use with certain aggressive chemicals. Durability: They may not be as durable as some other types of gaskets, such as those made from metal. Not Suitable for High Pressure: They may not be suitable for high-pressure applications. Applications of Non-Asbestos Paper Gasket Non asbestos gaskets are a type of sealing device that are widely used in various industries due to their excellent resistance to heat, oil, and other chemicals. They are made from a combination of synthetic fibers and elastomeric materials, which provide them with the ability to withstand high temperatures and pressures. These gaskets are an ideal replacement for traditional asbestos gaskets, which have been linked to various health issues. One of the primary applications of non-asbestos custom paper gaskets is in the automotive industry. They are commonly used in engines to seal the space between different components and prevent leakage of fluids. For instance, they can be found in the cylinder head, where they prevent engine oil and coolant from mixing. They are also used in the exhaust system to ensure a tight seal and prevent the escape of harmful gases. In the oil and gas industry, non-asbestos high temp gasket paper are used in pipelines and other equipment to prevent leakage of oil, gas, and other fluids. They are designed to withstand the high temperatures and pressures that are common in this industry. They also resist corrosion, making them suitable for use in offshore platforms and other harsh environments. In conclusion, Non-Asbestos Paper Gaskets are a versatile sealing solution that finds applications in a wide range of industries. Their excellent resistance to heat, oil, and other chemicals, along with their ability to withstand high temperatures and pressures, makes them an ideal choice for various applications. Moreover, their non-toxic nature makes them a safe and environmentally friendly alternative to traditional asbestos gaskets. As a paper gasket maker, we can provide kinds of gasket paper for sale, if you have needs, please contact us. If you want to know more kinds of seal product, please visit our website.

non asbestos gasket pdf non asbestos gasket uses / non asbestos gasket application Non Asbestos Gasket Definition Non-asbestos metal composite sealing material is a type of gasket material that is used to create a tight seal between two surfaces. It is made from a combination of metal and non-asbestos fibers, which are bonded together using a special adhesive. This material is highly resistant to heat, pressure, and chemicals, making it ideal for use in a wide range of industrial applications. Unlike traditional asbestos-based materials, it does not pose any health risks, making it a safer alternative for workers and the environment. What Are the Benefits of Using Non-asbestos Metal Composite Sealing Material? Non-asbestos metal composite sealing material offers several benefits. Firstly, it is safer for human health as it eliminates the risk of asbestos exposure, which can cause serious lung diseases. Secondly, it provides superior sealing performance, with excellent heat and pressure resistance, making it suitable for high-temperature and high-pressure applications. Thirdly, it has a longer lifespan due to its high durability and resistance to wear and tear. Fourthly, it is environmentally friendly, as it does not release harmful substances. Lastly, it offers versatility as it can be used in various industrial applications, including automotive, aerospace, and chemical industries. What Are the Applications of Non-asbestos Metal Composite Sealing Material? Non-Asbestos Metal Composite Sealing Material is widely used in various industries due to its excellent sealing performance and heat resistance. It is commonly used in the automotive industry for sealing exhaust systems, cylinder head gaskets, and other engine components. In the oil and gas industry, it is used for sealing flanges, valves, and pumps. It is also used in the chemical industry for sealing reactors, heat exchangers, and other equipment. Additionally, it is used in power generation equipment, marine applications, and various types of industrial machinery. Its ability to withstand high temperatures and pressures makes it a preferred choice for many industrial applications. FAQS FAQs of Non-Asbestos Metal Composite Sealing Material How is non-asbestos metal composite sealing material made? Non-asbestos metal composite sealing material is made by combining synthetic fibers with a metal matrix. The fibers are dispersed evenly throughout the metal matrix, which gives the material its unique properties. Is non-asbestos metal composite sealing material environmentally friendly?Is non-asbestos metal composite sealing material environmentally friendly? How does non-asbestos metal composite sealing material compare to traditional asbestos-based materials?How does non-asbestos metal composite sealing material compare to traditional asbestos-based materials? Can non-asbestos metal composite sealing material be customized?Can non- asbestos metal composite sealing material be customized? How long does non-asbestos metal composite sealing material last?How long does non-asbestos metal composite sealing material last? How to properly dispose of non-asbestos metal composite sealing material?How to properly dispose of non-asbestos metal composite sealing material? As one of non asbestos gasket manufacturers and non asbestos gasket suppliers, we can provide kinds of non asbestos sheet material gaskets for sale, if you have needs, please contact us. If you want to know more kinds of sealing products, please visit our website.

Noise Cancellation Products And Vibration Damping Products Experience tranquility like never before with Teamful Sealing's Noise and Vibration Control Products. Our innovative solutions are designed to create a serene environment, free from unwanted noise and vibrations. Whether it's for your home, office, or industrial space, our products ensure a peaceful and productive atmosphere. Choose Teamful Sealing, where silence is not just golden, it's guaranteed. Types of Noise And Vibration Absorbing Metal Control Products Brake Shim Material GX6440 Brake Shim Material GX5040 Brake Shim Material Brake Shim Material Experience the ultimate in braking performance with Teamful Sealing's Brake Shim Material. Engineered for maximum durability and noise reduction, our product ensures smoother, quieter stops. Don't compromise on safety or comfort - choose Teamful Sealing's Brake Shim Material for a superior driving experience. Brake Shims Drive with confidence with Teamful Sealing's Brake Shims. Expertly designed to reduce noise and enhance brake performance, our shims offer a smoother, quieter ride. Experience the difference in safety and comfort with Teamful Sealing's Brake Shims - where quality meets performance. Why Choose Teamful Sealing For Noise And Vibration Control Products? Choose Teamful Sealing for industrial noise control products and vibration control products because we prioritize your peace and productivity. Our products are meticulously engineered to reduce unwanted noise and vibrations, creating a serene environment for your home, office, or industrial space. We use innovative technology and high-quality materials to ensure durability and effectiveness. Our commitment to customer satisfaction is reflected in our responsive customer service and competitive pricing. With Teamful Sealing, you're not just purchasing a product, you're investing in tranquility. Experience the Teamful Sealing difference - where silence isn't just golden, it's guaranteed. How Long Do Noise And Vibration Control Products Last? The lifespan of noise abatement products and vibration control products can vary greatly depending on several factors including the specific product, its application, and the environment in which it's used. However, at Teamful Sealing, we pride ourselves on the durability and longevity of our products. Manufactured with high-quality materials and designed to withstand rigorous use, our products typically offer many years of effective noise and vibration control. Regular maintenance and proper care can also extend the life of these products. For specific lifespan information on a particular product, we recommend contacting our knowledgeable customer service team. Applications of Sealing Products As a cummins supplier, we serve diverse industries, offering expert sealing material and engineering knowledge. Our high-quality, customized solutions meet technical requirements for various applications, primarily in transportation, construction, agriculture, and industrial equipment. If you want to know more kinds of vibration and vibration dampers, please visit our website.

Mica Gasket Mica gasket has good mechanical strength and electrical performance at normal conditions, with high temperature resistance and excellent thermal insulation performance and anti-sticking performance. Mica gasket sheet material is composited from double-sided fiber reinforced mica facing and stainless steel metal core. wherein the mica seal layer is composed of expanded mica, high temperature resistance fiber and high grade binder. Recommend use for high temperature exhaust vents, turbochargers sealing applications, as well as to be the insulation pad for electrical appliances, welding machines, lightning arresters and electric heating elements. Features of Mica Gasket Heat Resistance: Mica Gaskets are known for their exceptional heat resistance. They can withstand temperatures up to 1000 degrees Celsius, making them ideal for high-temperature applications. Insulating Properties: Mica, the material from which these gaskets are made, is a naturally occurring mineral with excellent insulating properties. This makes Mica Gaskets perfect for applications requiring electrical or thermal insulation. Non-Flammable: Mica Gaskets are non-flammable, adding an extra layer of safety in applications involving high heat or fire risk. Chemical Inertness: Mica Gaskets are chemically inert, meaning they do not react with most chemicals. This makes them suitable for use in various industrial applications. Mechanical Strength: Despite their flexibility, Mica Gaskets have good mechanical strength and can resist pressure well. Versatility: Mica Gaskets are flexible and can be cut into various shapes and sizes, making them adaptable to a wide range of sealing and insulation applications. Applications of Mica Gasket Designed to meet the diverse needs of the transportation, construction machinery, agricultural machinery, and various industrial equipment industries, Teamful mica gaskets offer unparalleled performance and reliability. Experience the benefits of our mica gaskets. With excellent electrical insulation properties and resistance to high temperatures, our gaskets ensure a secure and reliable seal, preventing leaks and minimizing downtime. The unique properties of mica make it an ideal choice for applications that require both electrical insulation and heat resistance. Our mica gaskets are suitable for a wide range of applications. From engines and exhaust systems to hydraulic systems and electrical components, our gaskets provide a reliable seal in various equipment and machinery. Choose our mica gaskets for their superior quality, durability, and performance. Our commitment to OEM standards ensures that you receive the highest quality products that meet your specific requirements. Contact us now to learn more about our mica gaskets and how they can revolutionize your sealing needs. As a cummins parts supplier, we will do our best to meet all the needs of customers.

WAG-TL1305 Non-asbestos Metal Composite Material WAG‐TL1305 is a gray color metal steel composite gasket material laminated with TL1305 facing material and mechanically combined to a perforated steel core. It is intended for exhaust manifold, cylinder head as well as other industrial sealing applications that require high strength, thermal integrity. The short duration maximum temperature is up to 400℃ (752℉). Specs of WAG-TL1305 Non-asbestos Metal Composite Sealing Material TL1305 is a general use facing material that used to combine and composite with metal steel cores to create high-performance gaskets.These materials typically consist of a fiber-reinforced composite layer bonded to a metal steel core. The fiber facing material provides excellent sealing properties, while the metal steel core provides strength and stability. Properties Test Method Specification Density/ (g/cm3) ASTM F1315 2~3 Compressibility/% ASTM F36 8~ 18 Recovery/% ASTM F36 ≥40 Ignition Loss/% at 800℃, 1h ASTM F495 ≤30 Fluid Resistance (Immersion at ASTM IRM 903 Oil, 149±2℃, 5h) Weight Increase/% ASTM F146 ≤30 Thickness Increase/% ASTM F146 ≤20 Fluid Resistance (Immersion at ASTM Fuel B, 21~30℃, 5h) Weight Increase/% ASTM F146 ≤30 Thickness Increase/% ASTM F146 ≤20 Click here to download more files. Features of WAG-TL1305 Non-asbestos Metal Composite Sealing Material Excellent sealing properties: The fiber material facing provides excellent sealing properties, ensuring a tight and reliable seal between mating surfaces. This helps prevent leakage of fluids or gases, even under high pressure or vacuum conditions. High temperature resistance: Metal composite gaskets with fiber material facing can withstand high temperatures, thanks to the heat resistance of the fiber material. This allows them to maintain their sealing properties even in applications with elevated temperatures. Chemical resistance: The fiber material facing in metal composite gaskets provides good chemical resistance, making them suitable for use in applications where exposure to various chemicals is expected. They can resist acids, alkalis, solvents, oils, and other aggressive substances. Strength and stability: The metal core in the composite gasket provides strength and stability, ensuring the gasket maintains its shape and integrity under compression. This allows for reliable sealing even in applications with high pressure or mechanical stress. Conformability: Metal composite gaskets with fiber material facing have a certain level of conformability, allowing them to adapt to irregular or non- flat surfaces. This helps ensure a proper seal, even on imperfect mating surfaces. Resistance to creep and relaxation: The combination of metal and fiber materials in the composite gasket helps minimize creep and relaxation, meaning the gasket maintains its sealing properties over time and under prolonged use. This ensures a long-lasting and reliable seal. Easy installation and removal: Metal composite gaskets with fiber material facing are typically easy to install and remove, thanks to their flexibility and conformability. This can help reduce downtime during maintenance or repairs. Cost-effective: Metal composite gaskets with fiber material facing offer a cost-effective solution compared to solid metal gaskets. They provide a balance between performance and cost, making them a popular choice in various industries. Applications of WAG-TL1305 Non-asbestos Metal Composite Sealing Material Metal composite gaskets with fiber material facing are commonly used in various industrial applications where a reliable and high-performance sealing solution is required. Some typical applications for these gaskets include: Automotive industry: Metal composite gaskets with fiber material facing are used in automotive engines, particularly in cylinder heads, exhaust manifolds, and intake manifolds. They provide excellent sealing properties, high temperature resistance, and resistance to chemicals and fluids. Petrochemical industry: These gaskets are used in petrochemical plants for sealing flanges, valves, and other equipment that handle corrosive fluids, high temperatures, and high pressures. They can withstand aggressive chemicals and provide reliable sealing in demanding environments. Power generation: Metal composite gaskets with fiber material facing are used in power plants, including fossil fuel power plants and nuclear power plants. They are used in various applications such as steam turbines, heat exchangers, and flue gas systems, where they provide reliable sealing under high temperatures and pressures. Oil and gas industry: These gaskets are used in oil refineries, offshore platforms, and pipelines for sealing flanges, valves, and other equipment. They can withstand the harsh conditions of the oil and gas industry, including high temperatures, high pressures, and exposure to corrosive fluids. Chemical processing industry: Metal composite gaskets with fiber material facing are used in chemical processing plants for sealing equipment such as reactors, pumps, and valves. They provide resistance to a wide range of chemicals and ensure leak-free operation. These are just a few examples of the typical applications for metal composite gaskets with fiber material facing. The specific application will depend on the requirements of the industry, such as temperature, pressure, chemical compatibility, and environmental conditions. As one of sealing product manufacturers, we will do our best to meet all the needs of customers.

Product Description 7x 7 x 0.3 Monocrystaline CVD Product description: Characteristics of CVD: The film formed by CVD deposition is dense and uniform, the deposition speed is fast, the quality of the film is stable, and mass production is easy to achieve. However, the deposition temperature of CVD is very high, usually between 900°C and 2000°C, which easily deforms the parts, thus limiting the selection of substrates, deposited layers, or the quality of the resulting workpieces. We offer a large range of CVD diamond seeds in various sizes at affordable prices Product details: Size Available: Crystal growth process: Single crystal CVD Color: Near colorless Available size : 3x3x0.3 4x4x0.3 5x5x0.3 6x6x0.3 7x7x0.3 8x8x0.3 9x9x0.6 10x10x0.3 11x11x0.3 12x12x0.3 13x13x0.3 15x15x0.3 Advantage: 1) Regular shape, uniform size. The size can be strictly controlled according to customer needs. 2) High repurchase rate and high cost performance, well received by customers. 3) No visible growth lines,under 100x microscope without impurities. 4) The stress is good, the number of times of reuse is high, and it is not easy to crack. 5) The best quality of all seeds known on the market. Orientation: 4pt/100 Shape: Square, Retangle Size Available : 3*3*0.3, 5*5*0.3, 6*6*0.3 ,7*7*0.3, 8*8*0.3, 9*9*0.3,9*9**0.5 10*10*0.4, 12*12*0.4 13*13*0.5 14*14*0.3 15*15*0.3 Edges Green Laser Cut Laser Kerf < 2° Lateral Tolerance: +0.2/-0 mm Thickness Tolerance +0.1mm/-0 mm Roughness, Ra (Choose one from three) 1. Two sides polished, Ra < 10 nm 2. One side polished,the other size is The other side is the cutting surface, or growth surface 3.Both sides are unpolished. Product Image: Square 7x7 Monocrystalline Diamond 0.3mm Single Crystal CVD Diamond Plate 0 Square 7x7 Monocrystalline Diamond 0.3mm Single Crystal CVD Diamond Plate 1

Product Description Item C11000 C10100 C10200 Copper Coil / Copper Strip Standard JIS H3100-2006 ,ASTM B152M-06,GB/T 2040-2008,ROCT 495-92,EN 1652-98,ASTM B171M-04, Material C12300,C1020P,C10100,C10400,C10700,C10200,T2,C , 1100P,C10500,M1, Cu- ETP,TP1,C1201P,C11000,Cu-DLP,TP2,C1220P,C12 , 21P,C1200,C12200, C14200,C23000P,H62,C2801P,C36500 Thickness 0.01mm~20mm Width 1mm~2500mm Length Random size and customize or as required Surface mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required Package Standard export seaworthy or as customers' requirements Application Copper coil can be made to do all sorts of deep drawing and bending stress components,such as manufacturing pins,rivets,gasket,nuts,conduits,the barometer spring,screen,radiator parts, etc Export to Ireland,Singapore,Indonesia,Ukraine,Saudi,Arab , ia,Spain,Canada,USA,Brazil,Tha iland, Iraq,Russia,Holland,Turkey,Kuwait,Korea,Argent , ina,India,Egypt,Oman,Malaysia, Peru,Vietnam,Mex , ico,etc Enamelled Solid Bare Copper Wire 5mm For Conductive Industry-specific attributes Cu (Min) ≥65% Alloy Or Not Non-Alloy Ultimate Strength (≥ MPa) 315 Other attributes Place of Origin Shandong, China Type Red Copper Wire Application Conductive Grade Brass,Copper Brand Name jinshunlai Model Number C11000 C12200 etc Processing Service Bending, Decoiling, Welding, Punching, Cutting Product name 99.9% Pure Copper Wire, Dead Soft copper wire rod C11000 Key word 12ga Copper Wire MOQ 1ton Grade C12000 C11000 C1100 C1202 PACKAGE Carton PRICE TERM CIF CFR FOB EX-WORK DELIVERY TIME 7-10 Days Sample Avaliable Diameter 0.3mm-12mm Color Red Cppper Packaging & delivery Package Type: Standard Seaworthy Package,inside is kraft paper,water plastic film is in the middle and outside is GI sheet to be covered by steel strip with lockEnamelled Solid Bare Copper Wire 5mm for Conductive 0 Supply Ability Supply Ability 10000 Ton/Tons per Month Product details Products Description Product name 1 lb, 99.9% Pure Copper Wire, Dead Soft copper wire rod C11000 16ga copper wire rod C27000 brass wire Model Number C11000, C10200, C12000, C12200 C26800 C27000 C35000 C38000 etc. MOQ 100kg Color Red Cppper Standard B465 JISH3250-2006 Payment Term 30%TT Advance + 70% Balance PRICE TERM CIF CFR FOB EX-WORK Coating Double Layer or customized Packing Standard Seaworthy Package DELIVERY TIME 7-20 Days Hardness 1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc Surface mill,polished,bright,o , iled,hair line,brush,mirror,sand blast,or as required Application 1. Pancake Coil for ACR, General Engineering Applications 2. LWC Coil for ACR, General Engineering Applications 3. Straight Copper Tubes for ACR and Refrigeration 4. Inner-grooved copper tube for ACR and Refrigeration 5. Copper Pipe for Transportation System of water, gas and oil 6.PE-coated copper tube for water/gas/oil transportation system 7.Semi-finished Copper tube for industrial applications The insulation or overcoating used on enameled round wire is a type of polymer film (varnish) made from a variety of resins—typically polyester, polyglass, or polyamide—to create a tough, continuous layer of protection for the wire and allow for numerous windings in a coil without producing a short circuit. Various types of varnishes produce different characteristics or properties, such as: High thermal index (AI) Abrasion resistance (NY) Self-bonding (SB) Self-lubricating (SL) Enameled round wire meets temperature classes between 105 °C and 240 °C, providing a guaranteed service life of 20,000 hours at the rated temperature. Magnet wire comes in a variety of sizes and shapes such as rectangular, square, and round. Enameled wire with a thermoplastic layer to bond the coils together is used to create self-supporting coils, which eliminate the need for a bobbin and accommodate tight spaces in various electronics applications. The enameled copper wire is made of copper conductor and insulation materials, the insulation materials mainly include UEW, PEW and AIW, the temperature class 130℃, 155℃, 180℃, 200℃, 220℃ and 240℃. The color is natural and beautiful.

Product Description Titanium Elbow Of Titanium Pipe Fittings For Petrochemical Industry Fluid Transport Heat Exchangers Pressure Vessels Titanium Pipe Fittings - OVERVIEW *If you have any requirements for customized titanium elbow, we would be delighted to further discuss the technical specifications with you and provide a quotation. *Our production capacity is efficient, and our logistics channels are well- developed. We can deliver products via international express to any corner of the globe within 3 to 7 days. Titanium pipe fittings specifications & parameters Product name Titanium seamless elbow Application field Petrochemical Available size 1/2" to 24" (U.S.), DN15 to DN600 (EU) or customized size Material Grade Grade 2, Grade 5 (U.S.), Ti-6Al-4V, Ti-6Al-7Nb (EU) Wall Thickness Sch 10, Sch 40, Sch 80 Angle 45°, 90°, 180° Connection Type Welded, Threaded, Quick-fit Surface Finish Pickling, Passivation Operating Temperature -60°C to 300°C Operating Pressure Up to 3000 PSI Elbow of Titanium Pipe Fittings - APPLICATIONS The petrochemical industry is a high-stakes field that demands materials capable of withstanding extreme conditions. One such material that has proven its mettle is titanium, particularly in the form of titanium elbow pipe fittings. Manufactured by BaseTi, a leading titanium factory and supplier, these fittings offer unparalleled advantages in petrochemical applications. Key Features of Titanium Elbow Pipe Fittings Low Density: Titanium has a density of 4.51 g/cm³, making it lighter than most metals used in industrial applications. This results in easier installation and reduced transportation costs. High Strength: With a tensile strength ranging from 30,000 psi to 200,000 psi depending on the grade, titanium elbows can withstand high-pressure systems commonly found in petrochemical plants. Excellent Heat Resistance: Titanium can endure temperatures up to 600°C, making it ideal for high-temperature applications such as steam cracking. Superior Corrosion Resistance: Titanium is highly resistant to corrosion from a variety of chemicals, including chlorine and acidic solutions, which are prevalent in petrochemical processes. Applications in Petrochemical Industry Fluid Transport: Titanium elbow fittings are used in pipelines that transport corrosive fluids, ensuring long-lasting performance. Heat Exchangers: Given their heat resistance, these fittings are ideal for heat exchangers in petrochemical plants. Pressure Vessels: The high strength of titanium makes it suitable for pressure vessels that operate under extreme conditions. Case Studies Crude Oil Refining: A leading petrochemical company switched to BaseTi's titanium elbow fittings for their crude oil refining process, resulting in a 20% increase in pipeline lifespan. Chemical Processing: Another case involved a chemical plant that used BaseTi's titanium elbows in their corrosive fluid transport lines, reducing maintenance costs by 15%. Why Choose BaseTi? BaseTi is not just another titanium manufacturer; we specialize in providing high-quality titanium elbow fittings that meet and exceed industry standards. Our products are rigorously tested to ensure they meet the stringent demands of the petrochemical industry. Titanium elbow pipe fittings from BaseTi offer a robust solution for the challenging conditions faced in the petrochemical industry. With features like low density, high strength, excellent heat resistance, and superior corrosion resistance, they are the go-to choice for modern petrochemical applications. Sch 40 80 Titanium Elbow Titanium Tube Fittings For Heat Exchangers Pressure Vessels 0Sch 40 80 Titanium Elbow Titanium Tube Fittings For Heat Exchangers Pressure Vessels 1

Customized Size Galvanized Welded Wire Mesh Panels Corrosion Resistive 2x2 Galvanized Welded Wire Mesh Panels 6mm Welded Wire Mesh Sheets Sizes Product Description Product Description of Galvanized welded wire mesh panels: Galvanized Welded Wire Mesh Panels is made with plain steel wire welded together in square opening, then going through the hot dipped zinc coating process. Application: Suitable product for constructing animal cages, enclosure works, fabricating of wire containers and baskets, grills, partitions, machine protection fences, gratings and other construction applications. Hot dipped zinc coated welded wire mesh panel is made in accordance to English Standard normally in regard to the production and zinc coating. The finished welded mesh offer flat and uniform surface, firm structure, good integrity. It offers the most excellent anti-corrosion resistance among all the steel wire mesh products, it is also the most versatile wire mesh due to its wide application in different fields. Hot Dipped Galvanized After/Before Welding; Electro Galvanized After/Before Welding; PVC Coating With Green, Black, Color, Etc. Welded Mesh made of Stainless Steel Wire. Galvanized welded wire mesh panels specification ( Standard length: 30m / roll , Width : 0.3m - 2.5m ) Opening in inch Wire diameter (bwg) 1/4 '' x 1/4 '' 22 , 23, 24 3/8 '' x 3/8 '' 19 , 20 , 21 , 22 1/2 '' x 1/2 '' 16 , 17 , 18 , 19 ,20 , 21 , 22 , 23 5/8 '' x 5/8 '' 18 , 19 , 20 , 21 3/4 '' x 3/4 '' 16 , 17 , 18 , 19 , 20 , 21 1 '' x 1 '' 16 , 17 , 18 , 19 1 '' x 1/2 '' 16 , 17 , 18 , 19 , 20 , 21 1 '' x 1/4 '' 14 , 15 , 16 , 18 1 '' x 2 '' 14 , 15 , 16 2'' x 2 '' 7, 8, 9 , 10 , 11,12 4'' x 4'' 7, 8, 9 , 10 , 11,12 6'' x 6'' 7, 8, 9 , 10 , 11,12 Product Characters of Galvanized Welded Wire Mesh Panels : 1 . Excellent heat resistant and high intensity . 2 . High strength and strong integration . 3 . Flat and smooth surface combined with firm structure . 4 . Perfect Anti - Rust Property . 5 . Stay Holistiv even cut into fragmented parts . 6 . Long Using Life 7 . Hot dipped galvanized after welded. Not black welded point, more zinc coated ensure it has better anti-rust and last longer. But it also lead to higher cost. Product Application of Galvanized welded wire mesh panels: It is very popular in breeding industry: Can be made into floor heating, contruction use, various animal cages or fences for breeding with its excellent anti-corrosion property. The zinc coating offers a kind of decorative outlook with its flat surface. With first-class anti-corrosion property, it is widely used in mine sieving industries as sieving screen. The low carbon steel wire for making of hot-dipped welded wire mesh offers flexibility that can be made in many further fabrication applications. Customized Size Galvanized Welded Wire Mesh Panels Corrosion Resistive 0 Customized Size Galvanized Welded Wire Mesh Panels Corrosion Resistive 1 Customized Size Galvanized Welded Wire Mesh Panels Corrosion Resistive 2

Product Description Plain Fiberglass Cloth Roll -50°C To +260°C Width Customized Product Description: Our Fiberglass Cloth Roll is a superior quality fiberglass weave fabric with a plain woven structure, which is ideal for a variety of reinforcement and insulation applications. The fabric is composed of high-quality fiberglass yarns, making it incredibly durable and long-lasting. It has an elongation of 20%, which allows it to stretch slightly and conform to surfaces, making it easy to install. The fabric is available in a roll of 50 meters in length, making it easy to cut and customize for different applications. Whether you are looking for a fabric for insulation, reinforcement, or other applications, the Fiberglass Cloth Roll is the perfect choice. It is designed to withstand harsh environments and provides superior protection against heat, cold, and moisture. The fabric is lightweight yet strong, making it perfect for tough jobs. And because it is composed of fiberglass yarns, it is resistant to wear and tear. Choose our Fiberglass Cloth Roll for all your reinforcement and insulation needs. This fiberglass textile is the perfect solution for any project that requires superior durability and protection. Get the best Fiberglass Weave Fabric on the market today! Features: Product Name: Fiberglass Cloth Roll Application: Insulation, Reinforcement Weave: Cloth Temperature Range: -50°C To +260°C Weave Type: Plain Woven Processing Service: Cutting Material: Fiberglass Mesh, Fiberglass Tissue, Fiberglass Fabric Technical Parameters: Product Property Description Weave Cloth Width Customized Surface Treatment Plain Length 50m Weave Type Plain Woven Resistance to Chemicals Excellent Color White Temperature Range -50°C To +260°C Flammability UL94-V0 Processing Service Cutting Applications: Fiberglass Cloth Roll is made with fiberglass weave, fiberglass textile, fiberglass mesh for superior strength and durability. It is made of high quality fiberglass material, with plain surface treatment and white color. The length of the fiberglass cloth roll is 50m, and it is ISO9001 certified. It is a great choice for many applications such as wall reinforcement, roof reinforcement, wall insulation, and so on. It comes with a minimum order quantity of negotiable, and negotiable price. It is packaged according to customer needs, and delivery time is generally 15-30 work days. Payment terms are TT. White Plain Woven Fiberglass Cloth Roll UL94-V0 50m 0 Packing and Shipping: Fiberglass Cloth Roll packaging and shipping: The fiberglass cloth roll will be securely packed in cardboard boxes for shipping. The boxes are labeled with product information for easy identification. All shipments are handled with care to ensure the safe delivery of the fiberglass cloth roll. The boxes are sealed with tape to prevent any damage or tampering during shipping. Tracking information will be provided with each shipment. White Plain Woven Fiberglass Cloth Roll UL94-V0 50m 1

Product Description Backpack lined pipe elbows are also called reinforced elbows, and the wear resistant parts welded at the parts where the impact and wear of the elbows are more serious are called backpacks. The wear resistant ceramic backpack elbow is based on the Wear resistant ceramic elbow, and a layer of antiwear design is added. The special ceramic is pasted on the inner wall of the pipeline with a high temperature-resistant inorganic adhesive, and after being heated and cured, it forms a solid antiwear design. Therefore, the Wear resistant ceramic backpack elbow realizes double-layer wear resistance, and the reinforced or double layer Wear resistant lining pipes are mainly suitable for working conditions with serious wear. Industry application Wear resistant lined pipes are often used in pneumatic conveying, especially in the process of pneumatic conveying, the bends of the pipeline are easy to wear and tear. The backpack-type wear resistant elbow (reinforced wear resistant elbow) produced and designed by Iberno can more effectively improve the Wear resistant life of the pipeline. It is processed by using Wear resistant materials and ordinary metal pipelines or finished elbows to improve its durability. Improve the grinding performance, change the shape and structure of its surface, make a special elbow with a backpack (double layer) shape, increase the thickness of the elbow scour part improve the wear resistance of the scour part, and generally improve the lining pipe service life. Ceramic backpack wear resistant elbows are generally used in coal powder conveying systems and dust removal systems in thermal power, steel, chemical, smelting, cement, etc.

PRODUCT DESCRIPTION Industry Molybdenum Products Round Circle Various Sizes Quick Details Dimensions: customized Product name: Molybdenum Rings Application: Industry Shape: Round Surface: Polished Purity: 99.95% Mo Density: 10.2g/cm3 Material: Pure Mo Grade: M01 Chemical requirements Element Ni Mg Fe < , br>Pb Al Bi Si Cd < , br>Ca P Concentration(%) 0.00 , 3 0.002 0.005 0.0001 0 , .002 0.0001 0.002 0.0001 < , br>0.002 0.001 Element C < , br>O N Sb Sn Mo Concentration(%) 0.01 0.003< , br> 0.003 0.0005 0.0001 ba , lance Parameters Atomic number 42 CAS number 7439-98-7 Atomic mass 95.94 [g/mol] Melting point 2620 °C Boiling point 4639 °C Density at 20 °C 10.22 [g/cm] Crystal structure Body-centered cubic Coefficient of linear thermal expansion at 20 °C 5.210-6 [m/(mK)] Thermal conductivity at 20 °C 142 [W/(mK)] Specific heat at 20 °C 0.25 [J/(gK)] Electrical conductivity at 20 °C 17.9106 [S/m] Specific electrical resistance at 20 °C 0.056 [(mm2)/m] Applications Molybdenum rings are widely used ed in national defense and the story, the electronic industry, aeronautics & Astron, aquatics, and mechanical engineering. The paraircraft’s wings and the screening materials mold mold commonly use molybdenum. Usage Support wire, lead-in wire, printer needle, various electrodes and quartz furnaces, filament, high-speed tools, auto products, sputtering targets