Metallurgy Machinery Parts

Specially designed for large image circle up to 82mm in length Suitable for line scan cameras such as 16K x 5μm,16K x 3.5μm,12K x 5μm, 8K x 7μm, etc, and area scan camera such as 155 mega pixels, 151 mega pixels The adjustable iris of this machine vision telecentric lens series is adopted to balance the DOF and resolution perfectly Excellent uniformity and little-to-no distortion Some models support inner L90 steering, saving installation space 16 standard models available, support object FOV from 45mm to 390mm Long working distance from 120mm to 700mm M95 Mount, support customized mount Canrill is a professional optical lens manufacturer, we provide line scan camera lens, line scan lens and etc. Want to know more? Please contact us.

Minimum Order: 8000

DIN3352 F4 Metal Seat gate valve The ductile iron core is fully vulcanized with EPDM rubber, no iron parts are exposed to the medium and the excellent rubber vulcanization prevents creeping corrosion underneath the rubber. Guides in the wedge and on the Light Type Gate Valve body ensure a uniform closure, safe operation ensured as the guides prevent overloading of the stem. Stainless steel stem with rolled threads for high strength. The Resilient seat gate valve can replace stem seals under pressure.

AWWA C509 OS&Y Resilient Seated Gate Valve, DN50-DN450 The ductile iron core is fully vulcanized with EPDM rubber, no iron parts are exposed to the medium and the excellent rubber vulcanization prevents creeping corrosion underneath the rubber. Guides in the wedge and on the Light Type Gate Valve body ensure a uniform closure, safe operation ensured as the guides prevent overloading of the stem. Stainless steel stem with rolled threads for high strength. The gate valve can replace stem seals under pressure.

DIN3352 NRS Brass Gland Socket End Resilient Seated Gate Valve， 63mm-315mm The ductile iron core is fully vulcanized with EPDM rubber, no iron parts are exposed to the medium and the excellent rubber vulcanization prevents creeping corrosion underneath the rubber. Guides in the wedge and on the gate valve body ensure a uniform closure, safe operation ensured as the guides prevent overloading of the stem. Stainless steel stem with rolled threads for high strength. The cast iron gate valve can replace stem seals under pressure. Full bore. Body inside and outside fusion bonded epoxy coating with excellent corrosion resistant performance. Suitable for PVC pipes, easy installation. 

BS5163 light type gate valve with cap The ductile iron core is fully vulcanized with EPDM rubber, no iron parts are exposed to the medium and the excellent rubber vulcanization prevents creeping corrosion underneath the rubber. Guides in the wedge and on the Resilient seat gate valve body ensure a uniform closure, safe operation ensured as the guides prevent overloading of the stem. Stainless steel stem with rolled threads for high strength. The Gate Valve can replace stem seals under pressure. Full bore. Body inside and outside fusion bonded epoxy coating with excellent corrosion resistant performance. 

DIN3352-F4 NRS Resilient seat gate valve , DN40-DN1200 The ductile iron core is fully vulcanized with EPDM rubber, no iron parts are exposed to the medium and the excellent rubber vulcanization prevents creeping corrosion underneath the rubber. Guides in the wedge and on the DIN Gate Valve body ensure a uniform closure, safe operation ensured as the guides prevent overloading of the stem. Stainless steel stem with rolled threads for high strength. The Gate Valve can replace stem seals under pressure. Full bore. Body inside and outside fusion bonded epoxy coating with excellent corrosion resistant performance.  Standard of cast iron gate valve Design standard DIN3352 F4, EN1171 Flange drilling standard EN1092-2 PN10/PN16 Face to face standard EN558-1 Series 14 Hydraulic test standard EN1074-1 and 2 /EN12266

Refractory fiber cone is also called ceramic fiber tap out cone. The furnace tap out cone is mainly used for controlling the liquid metal flow. AdTech refractory tap out cone adopts high-aluminum fiber, forms by the vacuum suction automatic equipment molding process. Each cone has a flat surface. More importantly, it has the features of appropriate hardness and toughness, not fragile, not peeling. Ceramic fiber tap out cone is suitable for mechanical or manual plugging and removal operations. AdTech ceramic fiber tap out cones are used in aluminum furnaces, fixed furnaces and other aluminum outlets. It makes the casting process of aluminum alloys more convenient, safe, and reliable.

Minimum Order: 1 bags

The aluminum silicate casting nozzle material is a key component of the aluminum strip continuous casting and rolling mill. Its quality directly affects the quality of the strip and the yield of production. The aluminum silicate casting nozzle material depends on the performance and It can be divided into multiple models if necessary. AdTech casting tips are dimensionally stable, thermal shock resistant and do not cause outgassing. Ceramic caster tip can effectively protect the quality of the cast and rolled coils. It is best used together with boron nitride paint. AdTech caster tip is used to produce high-grade aluminum alloy. Ceramic fiber caster tip consists of alumina ceramic liner and castertip ear. AdTech offers all of the component pieces required for continuous casting tip assemblies such as end dams, spacer boards, internal baffles, boron nitride coatings.

Minimum Order: 1 bags

Refine Flux smelts aluminum and aluminum alloys, and has a better degassing and impurity removal effect, which can make the hydrogen content in the aluminum alloy melt lower, and can more effectively reduce the burning loss of the metal. At the same time, the refining agent has a certain heating effect, which makes the hot slag recovery more convenient and the recovery rate is higher. Contact sales@adtechamm.com or visit www.adtechamm.com to BUY GRAIN REFINING FLUX. In order to manufacture high-quality aluminum or aluminum alloy profiles, the raw materials of aluminum or aluminum alloy profiles must be refined (refined), which requires a good Refine Flux. Refine Flux generally uses inert gas as a carrier to pass into the aluminum and aluminum alloy melt for degassing and impurity removal. If Refine Flux is used improperly, the following undesirable conditions will occur For example: poor separation of aluminum slag, poor degassing effect, excessive heating effect, increased aluminum burning loss, or no heating effect, resulting in the inability to recover hot slag. In general, before degassing and impurity removal of aluminum and aluminum alloy melts, the H (hydrogen) content is often more than 0.30ml/100gAl. If the raw materials are not good enough, the H content may even exceed 0.40ml/100gAl. Good quality refining The agent can divide the H content of the aluminum melt in the furnace to the level of 0.18ml/100gAl. When the flux is added to the aluminum alloy melt, it melts into flux droplets. Since the specific gravity of the flux is smaller than that of the melt, the flux droplets float in the melt. In the process of floating, it will meet the particles of non-metallic inclusions in the melt. Since the surface tension of the flux at the interface of the non-metallic inclusions is small, the flux can wet the non-metallic inclusions and make them adsorb to the flux droplets. The flux has a large surface tension at the interface of the molten aluminum and does not infiltrate, so the flux can surface with the adsorbed non-metallic inclusions under the action of the difference in specific gravity, and then be removed by slagging. This kind of slagging is generally called Slagging for flotation. Refine Flux has the following characteristics 1.It has a certain dissolving ability for oxides. 2.Enough to increase the fluidity of molten flux. 3. It can effectively remove the oxide film on the surface of the melt and improve the degassing effect. 4. Increase the surface tension of the mixed molten salt, spheroidize the molten salt that has adsorbed oxides, facilitate separation from the melt, reduce the loss caused by the solid molten slag entrapped in aluminum, and increase the surface tension of the flux-melt , Accelerate the process of volume adsorption inclusion.

Minimum Order: 1 bags

Refine Flux smelts aluminum and aluminum alloys, and has a better degassing and impurity removal effect, which can make the hydrogen content in the aluminum alloy melt lower, and can more effectively reduce the burning loss of the metal. At the same time, the refining agent has a certain heating effect, which makes the hot slag recovery more convenient and the recovery rate is higher. Contact sales@adtechamm.com or visit www.adtechamm.com to BUY GRAIN REFINING FLUX. In order to manufacture high-quality aluminum or aluminum alloy profiles, the raw materials of aluminum or aluminum alloy profiles must be refined (refined), which requires a good Refine Flux. Refine Flux generally uses inert gas as a carrier to pass into the aluminum and aluminum alloy melt for degassing and impurity removal. If Refine Flux is used improperly, the following undesirable conditions will occur For example: poor separation of aluminum slag, poor degassing effect, excessive heating effect, increased aluminum burning loss, or no heating effect, resulting in the inability to recover hot slag. In general, before degassing and impurity removal of aluminum and aluminum alloy melts, the H (hydrogen) content is often more than 0.30ml/100gAl. If the raw materials are not good enough, the H content may even exceed 0.40ml/100gAl. Good quality refining The agent can divide the H content of the aluminum melt in the furnace to the level of 0.18ml/100gAl. When the flux is added to the aluminum alloy melt, it melts into flux droplets. Since the specific gravity of the flux is smaller than that of the melt, the flux droplets float in the melt. In the process of floating, it will meet the particles of non-metallic inclusions in the melt. Since the surface tension of the flux at the interface of the non-metallic inclusions is small, the flux can wet the non-metallic inclusions and make them adsorb to the flux droplets. The flux has a large surface tension at the interface of the molten aluminum and does not infiltrate, so the flux can surface with the adsorbed non-metallic inclusions under the action of the difference in specific gravity, and then be removed by slagging. This kind of slagging is generally called Slagging for flotation. Refine Flux has the following characteristics 1.It has a certain dissolving ability for oxides. 2.Enough to increase the fluidity of molten flux. 3. It can effectively remove the oxide film on the surface of the melt and improve the degassing effect. 4. Increase the surface tension of the mixed molten salt, spheroidize the molten salt that has adsorbed oxides, facilitate separation from the melt, reduce the loss caused by the solid molten slag entrapped in aluminum, and increase the surface tension of the flux-melt , Accelerate the process of volume adsorption inclusion.

Minimum Order: 1 bags

sales@adtechamm.com provides Ceramic Foam Filter, Tap Out Cone, Degassing Unit, CFF Unit, Castertip, Launder, hop-top casting for molten aluminum. www.adtechamm.com Ceramic foam filter Dimension 660x660x50(26 inch) 584x584x50(23 inch) 508x508x50(20 inch) 432x432x50(17 inch) 381x381x50(15 inch) 305x305x50(12 inch) 228x228x50(9 inch) 178x178x50(7 inch) Ceramic foam filter Pore Size（PPI）:10/20/30/40/50/60 30ppi 40ppi Foundry Filter is the most commonly used ceramic foam filter in the aluminum casting industry. Ordinary aluminum casting usually uses 10-40ppi ceramic filter plates. Aviation and high-quality aluminum materials usually use 30-60ppi ceramic filter plates. Ceramic foam filters are basically divided into 6 pore sizes: 10PPI, 15PPI, 20PPI, 25PPI, 30PPI, and 40PPI. The larger the number, the smaller the aperture. But in actual practice, the four types of 10PPI 20PPI 30PP 40PPI can meet the needs of customers. Aperture selection 1. The casting: 10～25ppi 2. Semi-continuous casting: 30～60ppi 3. High-quality aluminum or sheet: 50～60ppi 4. Continuous casting and rolling: 50～60p ADTECH keeps focusing on the manufacture of the metallurgical material. ADTECH is one pioneer following by the International Enterprise, who keeps focusing on the manufacture of the metallurgical material. 1.Ceramic Foam Filter 2.Degassing Unit 3.Filter Box 4.Hot-top casting series 5.Roll casting nozzle 6.Flux series 7.Other Metallurgical Material SALES@ADTECHAMM.COM

Minimum Order: 1 bags

sales@adtechamm.com provides Ceramic Foam Filter, Tap Out Cone, Degassing Unit, CFF Unit, Castertip, Launder, hop-top casting for molten aluminum. www.adtechamm.com Ceramic foam filter Dimension 660x660x50(26 inch) 584x584x50(23 inch) 508x508x50(20 inch) 432x432x50(17 inch) 381x381x50(15 inch) 305x305x50(12 inch) 228x228x50(9 inch) 178x178x50(7 inch) Ceramic foam filter Pore Size（PPI）:10/20/30/40/50/60 30ppi 40ppi Foundry Filter is the most commonly used ceramic foam filter in the aluminum casting industry. Ordinary aluminum casting usually uses 10-40ppi ceramic filter plates. Aviation and high-quality aluminum materials usually use 30-60ppi ceramic filter plates. Ceramic foam filters are basically divided into 6 pore sizes: 10PPI, 15PPI, 20PPI, 25PPI, 30PPI, and 40PPI. The larger the number, the smaller the aperture. But in actual practice, the four types of 10PPI 20PPI 30PP 40PPI can meet the needs of customers. Aperture selection 1. The casting: 10～25ppi 2. Semi-continuous casting: 30～60ppi 3. High-quality aluminum or sheet: 50～60ppi 4. Continuous casting and rolling: 50～60p ADTECH keeps focusing on the manufacture of the metallurgical material. ADTECH is one pioneer following by the International Enterprise, who keeps focusing on the manufacture of the metallurgical material. 1.Ceramic Foam Filter 2.Degassing Unit 3.Filter Box 4.Hot-top casting series 5.Roll casting nozzle 6.Flux series 7.Other Metallurgical Material SALES@ADTECHAMM.COM

Minimum Order: 1 bags

sales@adtechamm.com provides Ceramic Foam Filter, Tap Out Cone, Degassing Unit, CFF Unit, Castertip, Launder, hop-top casting for molten aluminum. www.adtechamm.com Ceramic foam filter Dimension 660x660x50(26 inch) 584x584x50(23 inch) 508x508x50(20 inch) 432x432x50(17 inch) 381x381x50(15 inch) 305x305x50(12 inch) 228x228x50(9 inch) 178x178x50(7 inch) Ceramic foam filter Pore Size（PPI）:10/20/30/40/50/60 30ppi 40ppi Foundry Filter is the most commonly used ceramic foam filter in the aluminum casting industry. Ordinary aluminum casting usually uses 10-40ppi ceramic filter plates. Aviation and high-quality aluminum materials usually use 30-60ppi ceramic filter plates. Ceramic foam filters are basically divided into 6 pore sizes: 10PPI, 15PPI, 20PPI, 25PPI, 30PPI, and 40PPI. The larger the number, the smaller the aperture. But in actual practice, the four types of 10PPI 20PPI 30PP 40PPI can meet the needs of customers. Aperture selection 1. The casting: 10～25ppi 2. Semi-continuous casting: 30～60ppi 3. High-quality aluminum or sheet: 50～60ppi 4. Continuous casting and rolling: 50～60p ADTECH keeps focusing on the manufacture of the metallurgical material. ADTECH is one pioneer following by the International Enterprise, who keeps focusing on the manufacture of the metallurgical material. 1.Ceramic Foam Filter 2.Degassing Unit 3.Filter Box 4.Hot-top casting series 5.Roll casting nozzle 6.Flux series 7.Other Metallurgical Material SALES@ADTECHAMM.COM

Minimum Order: 1 bags

sales@adtechamm.com provides Ceramic Foam Filter, Tap Out Cone, Degassing Unit, CFF Unit, Castertip, Launder, hop-top casting for molten aluminum. www.adtechamm.com Ceramic foam filter Dimension 660x660x50(26 inch) 584x584x50(23 inch) 508x508x50(20 inch) 432x432x50(17 inch) 381x381x50(15 inch) 305x305x50(12 inch) 228x228x50(9 inch) 178x178x50(7 inch) Ceramic foam filter Pore Size（PPI）:10/20/30/40/50/60 30ppi 40ppi Foundry Filter is the most commonly used ceramic foam filter in the aluminum casting industry. Ordinary aluminum casting usually uses 10-40ppi ceramic filter plates. Aviation and high-quality aluminum materials usually use 30-60ppi ceramic filter plates. Ceramic foam filters are basically divided into 6 pore sizes: 10PPI, 15PPI, 20PPI, 25PPI, 30PPI, and 40PPI. The larger the number, the smaller the aperture. But in actual practice, the four types of 10PPI 20PPI 30PP 40PPI can meet the needs of customers. Aperture selection 1. The casting: 10～25ppi 2. Semi-continuous casting: 30～60ppi 3. High-quality aluminum or sheet: 50～60ppi 4. Continuous casting and rolling: 50～60p ADTECH keeps focusing on the manufacture of the metallurgical material. ADTECH is one pioneer following by the International Enterprise, who keeps focusing on the manufacture of the metallurgical material. 1.Ceramic Foam Filter 2.Degassing Unit 3.Filter Box 4.Hot-top casting series 5.Roll casting nozzle 6.Flux series 7.Other Metallurgical Material SALES@ADTECHAMM.COM

Minimum Order: 1 bags