Metallurgy Machinery

Zinc Kettle Galvanizing Kettles long service life Zinc Kettle Zinc Kettle manufacturer ANNUO Zinc Kettle Description Made of special steel sheet XG08, low C, Si, S, P chemical composition,with characteristics of corrosion resistance and long service life. Before cutting, do ultrasonic test to the steel sheet XG08 first, if the sheets are in good condition then start to cut. The kettles will also be ultrasonic tested before delivery. Process: Steel Sheet Preparing & Ultrasonic detecting -- Cutting -- Annealing -- Forming -- Integrated end -- Middle U shape -- Welding -- Ultrasonic detect -- Inspection -- Delivery The hot dip galvanizing process consists in submerging metal products in a molten zinc bath. The hot dip galvanizing plant can be designed as per the max. If you need, Please click here. https://www.annuogalvanizing.com/prod , uct-zinc-kettle.html

Liquid Zinc Holding Tank zinc water tanks Liquid Zinc Insulation Tank Manufacturer - Hebei Annuo Product Description Machine name: Liquid Zinc Insulation Tank Model.: XYBWG-70 The liquid zinc insulation tank is mainly composed of Base, Heater control box, Outer shell, Junction box, Ladder, Top cover, Inner container etc. This liquid zinc insulation tank is used for hot zinc molten workshop when production stopped for kettle maintenance. Pump out the liquid zinc to the insulation tank for heat preservation, can reduce the zinc melting time when filled back to the kettle, also can prevent liquid zinc solidification causing kettle damage. Hebei Annuo main supply , which include galvanizing equipment and accessories. Our products have high quality and competitive prices, if you are interested in our products, please contact us as soon as possible. https://www.annuogalvanizing.com/product-l , iquid-zinc-holding-tank.html

Zinc Ash Recovery Furnace zinc ash recovery machine Zinc Ash Separator zinc ash regeneration unit Product Application Hot Melt Type Zinc Ash Separator is a kind of equipment which is used to recycle free zinc from zinc ash in hot dip galvanizing workshop. It can recycle above 95% of free zinc particles from zinc ash and the recycled zinc can be directly added into zinc pot. The rest of the zinc oxide ash is sold to zinc chemical enterprise. According to different content of free zinc in zinc ash, the 300-700kg zinc is generally separated from 1000kg zinc ash. It adopts advanced practical technology of improving the utilization rate of zinc and reducing zinc consumption. It also can be applied in recycling free metal of tin, lead, aluminum alloy etc. The hot dip galvanizing process consists in submerging metal products in a molten zinc bath. The hot dip galvanizing plant can be designed as per the max. If you need, Please click here. Our website:www.annuogalvanizing.com

Small Parts Galvaniizng Plant Bolts and nuts Galvanizng Plant custom Galvaniizng Plant Product Description Galvanizing Object: Bolts and nuts Max production output: 10,000tonnes/year The weight can be set according to different material. The material is dipped into the kettle automatically, and the dipping time can be set as per requirement Fast and high speed for zinc centrifuge (centrifuge speed 300-1000rpm, adjustable) Feeding automatically Automatically cooling and unloading Hebei Annuo is specialized in producing galvanizing equipment, such as hot dip galvanizing furnace and zinc bath. We are happy to help you with your business needs. If you want to know the latest news about the galvanizing machine supplier, please come to our website and get a quote for free. https://www.annuogalvanizing.com/prod , uct-small-parts-galvaniizng-plant.html

Special Hot Dip Galvanizing Plant for Tubes galvanizing equipment hot dip galvanizing plant Steel Tubes Hot Dip Galvanizing Production line Including: Transfer trolley Fully enclosed pickling room Transmission unit Pretreatment Tanks Acid mist treatment system Galvanizing kettle Nature gas (electricity / oil) heating furnace Zinc fume Collecting system: Zinc Fume Enclosure Zinc fume Processing system: offline pulse inverse blowing bag filter Zinc powder treatment equipment Zinc powder collecting enclosure Flux regeneration system Pipe Galvanizing Equipment including: Pipe drying furnace, Galvanizing machine, Outlet pipe machine, Drawing machine, Translation column, Drawing track, Translation system, Guide rod inner blower, Steam heater, Keeping flat system, Cooling water tank, Spray, Print roller table, Package area, Electric control system, Compressed air system, Electric wire and cable. Hebei Annuo main supply , which include galvanizing equipment and accessories. Our products have high quality and competitive prices, if you are interested in our products, please contact us as soon as possible. https://www.annuogalvanizing.com/product-s , pecial-hot-dip-galvanizing-plant-for- tubes.htm , l

General Galvanizing Plant galvanizing equipment small hot dip galvanizing plant Product Description The Hot Dip Galvanizing Plant can be designed as per the max. Size of parts to be galvanized, production output, workshop dimension, requirement for the environment protection machine etc. Hebei Annuo is a global provider of Hot Dip Galvanizing Plant and Solutions, Specialty General HDG plant design and manufacture service. Hebei Annuo was founded in 1998, with more than 20 years experience in Galvanizing field, has built more than 30 complete Hot dip galvanizing plants in China and abroad. We have got ISO9001 and CE Certificates. Our products have been favored by more and more clients with the professional design, excellent quality and considerate service. Business Scope General galvanizing plant for structural steel, lighting poles, scaffolds, road guardrail, etc. Special galvanizing plant for small standard parts such as bolts and nuts. Special galvanizing plant for tubes. https://www.annuogalvanizing.com/pro , duct-general-galvanizing-plant.html

Flue Gas Heat Economizer Hot Dip Galvanizing Equipment Waste-heat Utilization Unit: Components: Tube heat exchanger, PP radiator, Expansion Tank, Hot water circulation Pump, Water softener, pipe fittings, Temperature control system, Electric control cabinet Usage of flue gas economizer: tubular heat exchanger is installed on the furnace flue (heat exchange temperature 90°C-100°C), The hot water is pumped into the expansion tank through the hot water circulation pump, then enter into the PP radiator, heat the solvent, to ensure the solvent tank temperature at 65°C±5°C. Hebei Annuo main supply , which include galvanizing equipment and accessories. Our products have high quality and competitive prices, if you are interested in our products, please contact us as soon as possible. https://www.annuogalvanizing.com/product-f , lue-gas-heat-economizer.html

PP Tanks Chemical Pretreatment Tanks pp pickling tank Advantages of PP pickling tank: 1. The outside of the tanks are made of high strength steel frame, with PP plate inside. 2. Due to the high strength of the steel frame and thick PP plate, these tanks are very suitable for Galvanizing requirements. 3. Since the steel frame is not in contact with the acid, so the tanks are good anti-corrosion. In addition, in case of leakage, it is very easy to find the leak point quickly, and easy to repair. Hebei Annuo is a global provider of Hot Dip Galvanizing Plant and Solutions, Specialty General HDG plant design and manufacture service. Hebei Annuo was founded in 1998, with more than 20 years experience in Galvanizing field, has built more than 30 complete Hot dip galvanizing plants in China and abroad. We have got ISO9001 and CE Certificates. Our products have been favored by more and more clients with the professional design, excellent quality and considerate service. Business Scope General galvanizing plant for structural steel, lighting poles, scaffolds, road guardrail, etc. Special galvanizing plant for small standard parts such as bolts and nuts. Special galvanizing plant for tubes. Our history From humble beginnings designing and manufacturing furnace to complete Hot dip galvanizing plant, Hebei Annuo has grown into a Chinese market leader in development, design and manufacture of Hot dip galvanizing plant. Over the past 20 years, Hebei Annuo’s experience and expertise has led to critical enhancements for companies, industries and Chinese and worlds’ infrastructure. now we are poised to have an even bigger impact on the world in the decades ahead. https://www.annuogalvanizing.com , /product-pp-tanks.html

Granite Tanks pickling tank granite pickling tank Advantages of granite pickling tank: 1. Convenient in manufacturing and construction, reliable quality and performance, strong durability, high functional. 2. Flexible setting, easy to maintain. 3. Strong acid and alkali resistance, crash resistant. Hebei Annuo is specialized in producing galvanizing equipment, such as hot dip galvanizing furnace and zinc bath. We are happy to help you with your business needs. If you want to know the latest news about the galvanizing machine supplier, please come to our website and get a quote for free. https://www.annuogalvanizing.com/prod , uct-granite-tanks.html

Galvanizing Furnace hot dip galvanizing furnace china hot dip galvanizing galvanizing factory Product Description Furnace is heated by natural gas, can ensure average thermal distribution surrounding zinc kettle, and partial overheating will not happen. ANNUO Galvanizing furnace consist of three systems: Furnace body system, burning system, control system. Furnace body steel structure is welded by section steel and steel plates, the material is high quality carbon steel. And strictly control the welding deformation to ensure the stiffness and strength of the furnace Furnace internal lining layers adopt ceramic refractory fiber compound structure (Ceramic refractory fiber layer thickness 60mm; Ceramic high aluminum refractory fiber folding block thickness 300mm Adopt Velocity burning nozzle and controller. Temperature control system consist of PLC system, instruments and gauges, ratio pulse control system. The furnace body adopt ceramic fiber modular assembling structure. It appear lower temperature outside the wall and Less heat waste while working. Galvanizing furnace is designed for easily inspection. Especially the burner, ventilation, regulated valve and other control parts inspection is accessible and proceed in the No-stop production state. Hebei Annuo main supply , which include galvanizing equipment and accessories. Our products have high quality and competitive prices, if you are interested in our products, please contact us as soon as possible. https://www.annuogalvanizing.com/product-g , alvanizing-furnace.html

Refine Flux smelts aluminum and aluminum alloys, and has a better degassing and impurity removal effect, which can make the hydrogen content in the aluminum alloy melt lower, and can more effectively reduce the burning loss of the metal. At the same time, the refining agent has a certain heating effect, which makes the hot slag recovery more convenient and the recovery rate is higher. Contact sales@adtechamm.com or visit www.adtechamm.com to BUY GRAIN REFINING FLUX. In order to manufacture high-quality aluminum or aluminum alloy profiles, the raw materials of aluminum or aluminum alloy profiles must be refined (refined), which requires a good Refine Flux. Refine Flux generally uses inert gas as a carrier to pass into the aluminum and aluminum alloy melt for degassing and impurity removal. If Refine Flux is used improperly, the following undesirable conditions will occur For example: poor separation of aluminum slag, poor degassing effect, excessive heating effect, increased aluminum burning loss, or no heating effect, resulting in the inability to recover hot slag. In general, before degassing and impurity removal of aluminum and aluminum alloy melts, the H (hydrogen) content is often more than 0.30ml/100gAl. If the raw materials are not good enough, the H content may even exceed 0.40ml/100gAl. Good quality refining The agent can divide the H content of the aluminum melt in the furnace to the level of 0.18ml/100gAl. When the flux is added to the aluminum alloy melt, it melts into flux droplets. Since the specific gravity of the flux is smaller than that of the melt, the flux droplets float in the melt. In the process of floating, it will meet the particles of non-metallic inclusions in the melt. Since the surface tension of the flux at the interface of the non-metallic inclusions is small, the flux can wet the non-metallic inclusions and make them adsorb to the flux droplets. The flux has a large surface tension at the interface of the molten aluminum and does not infiltrate, so the flux can surface with the adsorbed non-metallic inclusions under the action of the difference in specific gravity, and then be removed by slagging. This kind of slagging is generally called Slagging for flotation. Refine Flux has the following characteristics 1.It has a certain dissolving ability for oxides. 2.Enough to increase the fluidity of molten flux. 3. It can effectively remove the oxide film on the surface of the melt and improve the degassing effect. 4. Increase the surface tension of the mixed molten salt, spheroidize the molten salt that has adsorbed oxides, facilitate separation from the melt, reduce the loss caused by the solid molten slag entrapped in aluminum, and increase the surface tension of the flux-melt , Accelerate the process of volume adsorption inclusion.

Minimum Order: 1 bags

Refine Flux smelts aluminum and aluminum alloys, and has a better degassing and impurity removal effect, which can make the hydrogen content in the aluminum alloy melt lower, and can more effectively reduce the burning loss of the metal. At the same time, the refining agent has a certain heating effect, which makes the hot slag recovery more convenient and the recovery rate is higher. Contact sales@adtechamm.com or visit www.adtechamm.com to BUY GRAIN REFINING FLUX. In order to manufacture high-quality aluminum or aluminum alloy profiles, the raw materials of aluminum or aluminum alloy profiles must be refined (refined), which requires a good Refine Flux. Refine Flux generally uses inert gas as a carrier to pass into the aluminum and aluminum alloy melt for degassing and impurity removal. If Refine Flux is used improperly, the following undesirable conditions will occur For example: poor separation of aluminum slag, poor degassing effect, excessive heating effect, increased aluminum burning loss, or no heating effect, resulting in the inability to recover hot slag. In general, before degassing and impurity removal of aluminum and aluminum alloy melts, the H (hydrogen) content is often more than 0.30ml/100gAl. If the raw materials are not good enough, the H content may even exceed 0.40ml/100gAl. Good quality refining The agent can divide the H content of the aluminum melt in the furnace to the level of 0.18ml/100gAl. When the flux is added to the aluminum alloy melt, it melts into flux droplets. Since the specific gravity of the flux is smaller than that of the melt, the flux droplets float in the melt. In the process of floating, it will meet the particles of non-metallic inclusions in the melt. Since the surface tension of the flux at the interface of the non-metallic inclusions is small, the flux can wet the non-metallic inclusions and make them adsorb to the flux droplets. The flux has a large surface tension at the interface of the molten aluminum and does not infiltrate, so the flux can surface with the adsorbed non-metallic inclusions under the action of the difference in specific gravity, and then be removed by slagging. This kind of slagging is generally called Slagging for flotation. Refine Flux has the following characteristics 1.It has a certain dissolving ability for oxides. 2.Enough to increase the fluidity of molten flux. 3. It can effectively remove the oxide film on the surface of the melt and improve the degassing effect. 4. Increase the surface tension of the mixed molten salt, spheroidize the molten salt that has adsorbed oxides, facilitate separation from the melt, reduce the loss caused by the solid molten slag entrapped in aluminum, and increase the surface tension of the flux-melt , Accelerate the process of volume adsorption inclusion.

Minimum Order: 1 bags

Refine Flux smelts aluminum and aluminum alloys, and has a better degassing and impurity removal effect, which can make the hydrogen content in the aluminum alloy melt lower, and can more effectively reduce the burning loss of the metal. At the same time, the refining agent has a certain heating effect, which makes the hot slag recovery more convenient and the recovery rate is higher. Contact sales@adtechamm.com or visit www.adtechamm.com to BUY GRAIN REFINING FLUX. In order to manufacture high-quality aluminum or aluminum alloy profiles, the raw materials of aluminum or aluminum alloy profiles must be refined (refined), which requires a good Refine Flux. Refine Flux generally uses inert gas as a carrier to pass into the aluminum and aluminum alloy melt for degassing and impurity removal. If Refine Flux is used improperly, the following undesirable conditions will occur For example: poor separation of aluminum slag, poor degassing effect, excessive heating effect, increased aluminum burning loss, or no heating effect, resulting in the inability to recover hot slag. In general, before degassing and impurity removal of aluminum and aluminum alloy melts, the H (hydrogen) content is often more than 0.30ml/100gAl. If the raw materials are not good enough, the H content may even exceed 0.40ml/100gAl. Good quality refining The agent can divide the H content of the aluminum melt in the furnace to the level of 0.18ml/100gAl. When the flux is added to the aluminum alloy melt, it melts into flux droplets. Since the specific gravity of the flux is smaller than that of the melt, the flux droplets float in the melt. In the process of floating, it will meet the particles of non-metallic inclusions in the melt. Since the surface tension of the flux at the interface of the non-metallic inclusions is small, the flux can wet the non-metallic inclusions and make them adsorb to the flux droplets. The flux has a large surface tension at the interface of the molten aluminum and does not infiltrate, so the flux can surface with the adsorbed non-metallic inclusions under the action of the difference in specific gravity, and then be removed by slagging. This kind of slagging is generally called Slagging for flotation. Refine Flux has the following characteristics 1.It has a certain dissolving ability for oxides. 2.Enough to increase the fluidity of molten flux. 3. It can effectively remove the oxide film on the surface of the melt and improve the degassing effect. 4. Increase the surface tension of the mixed molten salt, spheroidize the molten salt that has adsorbed oxides, facilitate separation from the melt, reduce the loss caused by the solid molten slag entrapped in aluminum, and increase the surface tension of the flux-melt , Accelerate the process of volume adsorption inclusion.

Minimum Order: 1 bags

Refine Flux smelts aluminum and aluminum alloys, and has a better degassing and impurity removal effect, which can make the hydrogen content in the aluminum alloy melt lower, and can more effectively reduce the burning loss of the metal. At the same time, the refining agent has a certain heating effect, which makes the hot slag recovery more convenient and the recovery rate is higher. Contact sales@adtechamm.com or visit www.adtechamm.com to BUY GRAIN REFINING FLUX. In order to manufacture high-quality aluminum or aluminum alloy profiles, the raw materials of aluminum or aluminum alloy profiles must be refined (refined), which requires a good Refine Flux. Refine Flux generally uses inert gas as a carrier to pass into the aluminum and aluminum alloy melt for degassing and impurity removal. If Refine Flux is used improperly, the following undesirable conditions will occur For example: poor separation of aluminum slag, poor degassing effect, excessive heating effect, increased aluminum burning loss, or no heating effect, resulting in the inability to recover hot slag. In general, before degassing and impurity removal of aluminum and aluminum alloy melts, the H (hydrogen) content is often more than 0.30ml/100gAl. If the raw materials are not good enough, the H content may even exceed 0.40ml/100gAl. Good quality refining The agent can divide the H content of the aluminum melt in the furnace to the level of 0.18ml/100gAl. When the flux is added to the aluminum alloy melt, it melts into flux droplets. Since the specific gravity of the flux is smaller than that of the melt, the flux droplets float in the melt. In the process of floating, it will meet the particles of non-metallic inclusions in the melt. Since the surface tension of the flux at the interface of the non-metallic inclusions is small, the flux can wet the non-metallic inclusions and make them adsorb to the flux droplets. The flux has a large surface tension at the interface of the molten aluminum and does not infiltrate, so the flux can surface with the adsorbed non-metallic inclusions under the action of the difference in specific gravity, and then be removed by slagging. This kind of slagging is generally called Slagging for flotation. Refine Flux has the following characteristics 1.It has a certain dissolving ability for oxides. 2.Enough to increase the fluidity of molten flux. 3. It can effectively remove the oxide film on the surface of the melt and improve the degassing effect. 4. Increase the surface tension of the mixed molten salt, spheroidize the molten salt that has adsorbed oxides, facilitate separation from the melt, reduce the loss caused by the solid molten slag entrapped in aluminum, and increase the surface tension of the flux-melt , Accelerate the process of volume adsorption inclusion.

Minimum Order: 1 bags