Metal Products

Demister pads for boilers of sugar mills are designed with high temperature resistance, chemical inertness and excellent filtration efficiency. Demister Pad for Sugar Factory Diameter of demister pad 2000 mm Thickness of pad: approx 150 mm ( 6 inch ) Density of pad: 80 kg/m3 Material : SUS 304 For 2 bodies of 1st effect quintuple effect evaporator of Diameter 5500 mm and ht above calandria 8000 mm SPECIFICATION OF Demister Pads FOR 1x40 T/Hr BOILER OF SUGAR MILLS DESIGN PARAMETERS: To be installed in boiler steam drum for separating the water droplets from saturated steam. Steam flow rate: 40 ton/hr. (Normal) Operating pressure: 44-45 Kg/cm2 Operating temperature: 265 °C Liquid density: 788 Kg/M3 Vapour density: 22.7 Kg/M3

Filter raschig rings and wire mesh demisters are used to separate droplets or solid particles from a gas stream. The device consists of several rings of low resistance, rasched-ring style wire mesh stacked together. The size, length, and width depend on the application and the gas flow conditions. Size and length of the demister can range from 3 to 40 inches. The width of the demister typically ranges from 0.5 to 10 inches. Filter raschig rings are cylindrical pieces that fit over a liquid filter to provide support and form a seal. This ensures a tight fit, which helps prevent liquid leakage. Wire mesh demisters are made of a woven net that is wrapped around a filter's circumference to help remove solid particles from a liquid. They work by generating small amounts of turbulence that trap the particles, while allowing the liquid to pass through unimpeded. In order to ensure proper functioning, the size of the mesh should be such that it can effectively capture the particles that need to be removed.

High permeability demister pads are used in a wide range of applications, including air conditioning, chemical processing, and oil-water separations. The process for production involves the use of advanced equipment and methods to create the right size and shape of product in order to ensure the highest degree of performance. High permeability demister pads are used in a variety of industries and applications. In air conditioning, they are used to minimize water vapor condensate, while in chemical processing they are used to separate solid particles from liquids. Additionally, they are used in oil-water separations to improve the efficiency of systems. The permeability of demister pads is determined by the size of the openings in the material, as well as the density of the weave. The larger the size and density of the weave, the more efficient the separation will be. Additionally, the thickness of the material is a key factor in determining permeability as well. It is important to choose the right material and mesh size to ensure optimal efficiency.

Strainer demister pads are used to ensure that liquids and gases flow freely through the strainer. This filter element is made from mesh materials designed with a specific pore size and mesh opening size. Depending on the application, the mesh material ranges from steel, stainless steel, PVC, Polypropylene to other synthetic materials. Strainer demisters provide a higher level of removal efficiency than traditional demisters, including removing smaller particles from the process stream. The pad is designed with a high collection efficiency for droplet and aerosol removal, even when the process gas carries entrained liquid particles. This type of pad is particularly suitable for aggressive service applications. Applications Strainer demister pads are usually used in high-temperature and pressure applications, such as refineries, power stations, chemical plants, fertilizer manufacturing and petrochemical plants. They are also used in processes including amines, LPG, steam and boilers, cryogenics, air separation, and other related operations.

Vessel demisters are devices primarily used in high-pressure gas vessels and towers in power plants, chemical plants, refineries, and various other industrial processes. Vessel demister pads are an integral part of any process vessel, storage tank, and reactor system. Their unique design enables them to capture and contain the entrained droplets in the vapor stream and reduce contaminated vapors for clean air release. Material The material used in vessel demisters is typically constructed of wire mesh, polymers, metal, elements. Commonly used materials include polypropylene, polyethylene, stainless steel, zinc-plated steel, brass, and PVC. These materials can be selected based on their chemical, temperature, and corrosion resistance capabilities. Sizes and Shapes Vessel demister pads come in a wide range of sizes and configurations, including round pads, wedge wire pads, and various other shapes. The size and shape of a vessel demister usually depend on the size and shape of the equipment it will be installed in. Generally, the demisters are designed to fit within the vessel or tower that they are intended for. The length and width of a vessel demister depend on the size and configuration of the job.

Distiller Demister Pads are an essential component of distillation columns used to reduce the amount of entrained liquids and droplet entrainment in the filtration system. Sizes and Materials Distiller mesh demisters are available in a range of sizes, colors, materials, and shapes according to the application and the pressure drop desired in the system. The size also influences the contact surface area, efficiency, and overall performance of the pad. These pads typically range from 3/8" up to 48". The width can range from 12" up to 60" depending on the required surface area. Colors most offer standard grey, black, and white for easy system identification. The materials used for distiller demister pads include metallic stainless steel, fiberglass, polypropylene, and other synthetic fibers. Each material has its own distinct characteristics such as flexibility, chemical resistance, durability, and permeability. The length of the pad can vary depending on the application and desired shape. It is important to have an even distribution of mesh fibers throughout the entire length of the pad, which provides uniformity and better performance when compared to pads with irregular fiber distribution.

A baffled type mist eliminator is a device designed to reduce the amount of mist, droplets, aerosols, and other contaminants in gas or liquid streams. It consists of a series of baffles or plates arranged in a specific pattern to facilitate the separation of droplets from the gas stream. Baffled type mist eliminators are usually made from plastic, metal, or ceramic materials and can be manufactured in a variety of shapes and sizes. The production process of a baffled type mist eliminator starts with designing and fabricating the device. This involves selecting the materials and manufacturing the components according to the design specifications. Next, the device is assembled, tested, and installed in the process line. The device is then monitored for proper operation and any necessary adjustments are made. Baffled type mist eliminators can be made from a variety of materials, such as metals, plastics, and ceramics. Metals are typically used for larger, more complex designs, while plastics and ceramics are usually used in smaller devices. The profile of the device will depend on the material and the required performance. The number of baffles and their size and shape can also affect the performance of the device.

Mist separators are used to remove mist, aerosols, and other contaminants from air or gas streams. Supplied of various forms, materials, and sizes to fit the specific application needs. Mist separators are available in a variety of forms and sizes, depending on their application. Common forms include vertical, horizontal, and cylindrical designs. Materials used for mist separators may include stainless steel, plastic, fiberglass, and other metals. Mist Separators of Cylindrical Shape: Top inlet and a plate-type collector at the bottom which acts as an outlet. This assembly is usually fitted with a filter element to collect the mist particles before they reach the outlet. Primary application of mist separators is in industrial processes such as oil refining, petrochemical and chemical production, power plants, and the food and beverage industry. They are also increasingly being used in commercial and residential environments for treating polluted air. Mist separators can be used for both liquid and gaseous pollutants, and may include additional devices such as cyclones, centrifuges, electrostatic precipitators, and filters.

PRODUCT DESCRIPTION 430 stainless steel sheet metal is a kind of components and parts made of 430 stainless steel sheet processing, with good mechanical properties and corrosion resistance, suitable for the manufacture of various structural parts, decorative parts, electrical equipment, furniture, etc.. Compared with 304 stainless steel sheet metal, 430 stainless steel sheet metal has higher hardness and strength, but its corrosion resistance is relatively poor. In addition, 430 stainless steel sheet metal is easy to process and relatively low cost, but the surface quality is not as good as 304 stainless steel sheet metal, which is generally used in some applications with less stringent requirements. At present can provide services including CNC bending, shearing, edge planing, leveling, rounding, steel flattening, deburring, etc. When customers need metal fittings with complex structure and size, they only need to provide clear drawings or detailed descriptions about size, and then we can create them with the help of excellent engineers and various equipment.

Benifits • Professional blade for difficult-to-cut solid materials. • M51 tooth tips, designed to cut medium to very large work pieces with high precision. • With higher hardness up to 45HRC or tensile strength up to 1200MPa . • This blade is characterized by long blade life and extremely clean cutting surface. Features • Powder metallurgy (M51) high speed steel edge. • For difficult to cut solid materials. • Wear resistant. • Premium backing material for long fatigue life and good beam strength. • Deep gullet tooth design for better chip removal. Applications • Alloy Steel • Bearing Steel • Die Steel • Tool Steel • Stainless Steel • Titanium Alloys

Product Description Plain steel wire mesh is a kind of wire mesh that woven from various kinds of carbon steel wires. The raw material are generally Q195, but also high tensile carbon steel wires, copper coated steel wires and other iron wire materials.It’s one of the most commonly used wire mesh alloys. Information of Jiushen Plain Steel Wire Mesh Standard: GB/T 701-2008 ASTM E2016-15 ASTM E2814-18 GB/T 2040-2008 Refer to BG/T or ISO Material: Q195, Q235, C1006, C1008, 72A, 82B, 65Mn etc. Weaving Pattern: Plain Weave, Twill Weave, Plain Dutch Weave, Twill Dutch Weave, Herringbone Weave, Reverse Dutch Weave Application Plain steel mesh is widely used in many industries, including extrusion equipment for plastic, rubber, chemical and grain industry, agriculture, filtration and separation for oil,construction and more.

Product Description Wire mesh filters, panel filter, mesh filters, cylinder filter elements, stainless steel filter, and wire cloth filter for sale with best quality and low wholesale price. The wire mesh filter is made of a variety of different types of materials, but the stainless steel mesh filter is the most common because it is ideal for corrosive environments and easy to clean. The wire mesh filter includes general filters, high efficiency filters, precision filters and many others. Material: Stainless steel mesh, Sintered mesh, Sintered felt, Special alloy materials and other high-efficiency filter materials formed by extrusion molding and welding. Filter media can range from large to small or even micron accurate. Product Category: Multi-layer sintered meah, Multi-layer welded meah, Multi- layer mesh cylinder, Net frame, Special-shaped net bucket etc. Among all filter materials, stainless mesh filters have the advantages of high strength, pressure resistance, uniform force, high temperature resistance, and high pore content in the connecting pores. High Quality Wire Mesh Filter is widely applied in various industries, such as pharmaceutical, chemical, food processing, oil refining, water treatment, scientific experiments, waste gas treatment and etc.

Product Description Flame screen mesh with high visibility is launching dedicated to the high-end window screen market. The flame screen mesh currently available on the market are mainly vinyl-coated glass fiber window screens, which have flame-retardant and fireproof functions, but not ideal for protection and can be easily destroyed by children, pets or intruders. To solve this problem, we set out to develop high visibility flame retardant stainless steel window screens. Jiushen Wire Mesh is a kind of stainless steel flame screen, can not only be flame-retardant, add another important layer of protection to your family and properties, but also can meet all your high-standard and high-protection requirements for high-end window screens—keep bugs, flames and intruders all out of your pravite areas! Specification of Flame Screen Mesh Color: Black, white, gray Weaving Pattern: Plain weave rough selvedge Material: SS304, SS316 Application of Flame Screen Mesh Dedicated for high-end window screen mesh market. Used in windows, doors & porches to prevent flames, bugs, while the screen can not be damaged by children, pets & intruders because of it's super protective function.

Copper Wire Mesh Product Description Jiushen Copper wire mesh is durable in many types of environments. Although it is softer than a similar stainless steel wire mesh, it is also resistant to atmospheric corrosion but attacked by oxidizing agents such as nitric acid, ferric chloride, cyanides, and ammonia acid compounds. copper wire mesh is made of 99.9% pure copper and when exposed to the atmosphere, will naturally develop a thin green layer, known as patina. Material: Brass (H65, H80), Red Copper, Phosphor Bronze (CSn6.50.4) Standard: ASTM E2016-2020-5000 / ASTM E2814-2011 Weaving Pattern: Plain Weave, Twill Weave. Features: Corrosion resistance, wear resistance, non-magnetic, good ductility Application: Sieve grain, powder, porcelain clay, porcelain printing, shielding, filter gas and liquid etc. Copper mesh unique color makes it a very popular option for many different types of users, including designers, artists, architects and home owners. Home owners and designers opt for copper wire mesh for residential projects including gutter guards, soffit screens, insect screen, fireplace screen, or even custom manufactured infill panels or decorative wall panels.