Metal Processing Machinery Parts

Flanges are one of the main connecting and sealing elements in other structures such as pressure vessels, pipes, mechanical equipment, valves and pumps STANDARD ANSI 150 LB,300 LB,400 LB,600 LB 900 LB, 1500 LB and 2500 LB... DIN PN6, PN10, PN16, PN25, PN40, PN64 PN100,PN160,PN250,PN320,PN400... I1S 5K, 10K,16K,20K,30K,40K,63K... GB PN1.0,PN1.6,PN , 2.0,PN5.0,PN10.0,PN15.0 PN25.0,PN42.0PNO.25,PNO , .6, PN2.5,PN4.0...

It is mainly used in chemical containers, such as tubular heat exchangers, pressure vessels, boilers, condensers, central air conditioners, evaporators, seawater desalination, and plays the role of supporting fixed tubes. The metal material makes it not only has strong rigidity, but also has great heat conduction performance. The tube sheet processing begin with the lathe machining the outer circle, upper and lower surfaces, steps, positioning slot, surface milling slot，and then into the drilling process, for special requirements, some tube plates/sheets after drilling have to continue to locate the hole and milling the slot according to the required depth，that will improve the pulling force and tightness of the expansion tube

Storage tank is not filled with water, but different properties of liquid and gas, petroleum, chemicals, acid and alkali, alcohol, gas, liquid, etc., according to the actual storage medium is different, the storage tank needs to be built into different shapes, the most common two are: like a thermos cup "cylinder" and like a ball "sphere". Metal storage tank Carbon steel storage tank, stainless steel storage tank, aluminum, etc Non-metal storage tank Plastic storage tank, ceramic storage tank, fiberglass, etc Metal and non-metal composite storage tank Steel lined polyethylene, steel lined polyolefin, steel lined rubber, etc Standard

Shell And Tube Heat Exchangers are devices that transfer part of the heat from the hot fluid to the cold fluid, allowing hot water to flow through the pipe due to the temperature difference between the hot water in the pipe and the cold water in the container. Wall heat exchanger Two fluids with different temperatures flow in the space separated by the wall, and heat is exchanged between the two fluids through the heat conduction of the wall and the convection of the fluid on the wall surface. Regenerative heat exchanger Heat is transferred from high temperature fluid to low temperature fluid through the heat accumulator composed of solid material, so as to achieve the purpose of heat transfer.

Dandong Foundry is a metal casting manufacturer in China. We are producing iron & steel castings by sand casting and lost wax casting process.Our website:http://www.iron-foundry.com/.

Dandong Foundry is a metal casting manufacturer in China. We are producing iron & steel castings by sand casting and lost wax casting process.

Cast iron stove grate Our annual production output is 10,000 tons. The casting processes include automatic molding line, resin sand, pre-coated resin sand, green sand, shell molding, and lost wax investment casting process. We also have our own machining workshop for rough and finish machining works.

Minimum Order: 50

Cast Iron stove burner Our annual production output is 10,000 tons. The casting processes include automatic molding line, resin sand, pre-coated resin sand, green sand, shell molding, and lost wax investment casting process. We also have our own machining workshop for rough and finish machining works.

Cast Iron Exhaust Manifold Our annual production output is 10,000 tons. The casting processes include automatic molding line, resin sand, pre-coated resin sand, green sand, shell molding, and lost wax investment casting process. We also have our own machining workshop for rough and finish machining works.

Minimum Order: 50

Our features 1)OEM ODM manufacturing service 2)Confidentiality agreement 3)100% quality ensurance 4)lead time as fast as 3 day 5)Instant quote in 2 hours 6)worry free aftersales service

Minimum Order: 1 bags

Features Full automatic terminal crimping ma, using high-tech frequency conversion technology, electronic precision positioning, when pressure welding working noise is smaller than the traditional terminal, and save electricity, the variable is more convenient and quick, avoid the traditional terminal clutch,

Minimum Order: 1 bags

Hydraulic Brass Breather Vent NPT Thread Often Used on Single Acting cylinders or valves, Crank Cases, Storage Tanks and Hydraulic Cylinders Brass/SS304 Filter 40-60 Filter Mircon Size: NPT1/8” to NPT1” Vent Plug Application: Allow Sealed Pressure Systems to Vent Off Excess Pressure as Heat in System Builds up, Air Pressure is Allowed Back into System as System Cools Air vent fitting for allowing air to escape when internal pressures rise. Protect against excess vacuum and pressure in cylinders, gear boxes, enclosures, manifolds, and tanks. You can also use these breather vents to block debris from entering equipment. Breather vents with splash guard are good for containers that are often filled and drained; they have a guard that prevents oil from splashing out of the vent hole. Breather vent plugs have a hex head brass body with male pipe threads, and a 40 micron filter end. It is designed to provide vacuum relief on gear boxes, oil tanks, and reservoir. It is also used to convert double action cylinders into single action cylinders, and prevent foreign matter from entering the unfed opening. This vent plug can be easily removed and cleaned.

Minimum Order: 200

A sheet metal leveling machine, also known as a sheet metal flattening machine or a sheet metal straightening machine, is a piece of equipment used to flatten or straighten sheet metal. The machine consists of a series of rollers or leveling heads that apply pressure to the sheet metal, correcting any distortions or unevenness in the material. The rollers or leveling heads can be adjusted to apply different amounts of pressure to different areas of the sheet metal, allowing for precise leveling or straightening. Sheet metal leveling machines are commonly used in industries such as automotive, aerospace, construction, and manufacturing, where flat and straight sheet metal is essential for various applications. They are particularly useful for correcting distortions that occur during the manufacturing process, such as bending, warping, or buckling. Some sheet metal leveling machines are manual, requiring an operator to feed the sheet metal through the machine and make adjustments as needed. Others are automated or computer-controlled, allowing for more precise and efficient leveling or straightening. Overall, sheet metal leveling machines are essential tools for ensuring the quality and accuracy of sheet metal products, improving their functionality and appearance.

Minimum Order: 1 bags

All the products can process by customizatio , n. Please send us the 2D and 3D drawings ,  with size and tolerance. We will evaluat , e the drawings for you and process accordin , g to the draw ings. And we will keep  , the drawings strictly confidential. Customer , s can also choose  processing methods. Wi , th over 20 years experience, ShenZhen YuJiaX , in Hardware Products Co.,  Ltd. is a lea , ding manufacturer of precision metal parts i , n China, we pr ovide products to consumer ,  electronics, automotive, medical, and indust , ria l.

Minimum Order: 15 packs