Metal Processing Machinery

Scrap metal briquetting machine-ALLY Industrial International is a consortium of four companies, forming an upstream and downstream industrial chain. They are: Metal Processing Company: the factory covers area of 30000 square meters and has 70 employees, Business scope: CENTRIFUGAL PUMPS, Machining, Welding, Sheet metal processing, Forging, Casting. Rubber Machinery Company: the factory covers area of 50000 square meters and has 130 employees in total including 40 technicians and 15 senior engineers, Main products: Dispersion kneader, Internal mixer, Mixing mill and related production lines. Plastic Machinery Company: the factory covers area of 32000 square meters and has 160 employees, Main products: Film Blowing Machine, three layers co-extrusion lamination FFS heavy duty bags blowing film line,Three layers Co-extruded spinning film set,PE hot Shrink film set, Rubber tire separation film set. Automation Equipment Company: the factory covers area of 16000 square meters and has 40 employees, Main products: Robotic Parts Feeding System, Pick and Place Machine, Conveying Equipment, Conveyor rollers, Movable lift freight elevator, Metal shavings briquetting machine. Our industry solutions have been widely recognized by customers in Japan, United States and Europe.

Iron chip-Metal shavings briquetting machine-ALLY Industrial International is a consortium of four companies, forming an upstream and downstream industrial chain. They are: Metal Processing Company: the factory covers area of 30000 square meters and has 70 employees, Business scope: CENTRIFUGAL PUMPS, Machining, Welding, Sheet metal processing, Forging, Casting. Rubber Machinery Company: the factory covers area of 50000 square meters and has 130 employees in total including 40 technicians and 15 senior engineers, Main products: Dispersion kneader, Internal mixer, Mixing mill and related production lines. Plastic Machinery Company: the factory covers area of 32000 square meters and has 160 employees, Main products: Film Blowing Machine, three layers co-extrusion lamination FFS heavy duty bags blowing film line,Three layers Co-extruded spinning film set,PE hot Shrink film set, Rubber tire separation film set. Automation Equipment Company: the factory covers area of 16000 square meters and has 40 employees, Main products: Robotic Parts Feeding System, Pick and Place Machine, Conveying Equipment, Conveyor rollers, Movable lift freight elevator, Metal shavings briquetting machine. Our industry solutions have been widely recognized by customers in Japan, United States and Europe.

Minimum Order: 1 bags

I). Main Specification: Model TW200*200 TW200*250 TW200*300 Travel/space X/Y axis travel mm 2000*2000 2000*2500 , 2000*3000 U/V axis travel mm A type: 20*20 Table size L*W mm 1620*2480 , 1600*2550 1600*3100 Max workpiece thickness H mm 500 500 , 500 Taper angle R degree A type:±3° Roughness Ra(Once cutting) um ≤2.5 Ra(Multi- cutting) um ≤1.0 Precision< , br> * mm ≤0.015 Screw * pcs High precision ball screw Guide way * pcs Steel linear guide way Motor X/Y axis Servo motors control Machine dimension L*W*H mm 4200*4800* , 1900 5200*4800*1900 6200*5500*1900 II). Features: WITH THE BEST CONTROL SYSTEM 1. Lowest running cost 2. Reusable molybdenum wire 3. Multiplicity cutting function: better accuracy, better surface finishing 4. DXF, AutoCAD can be read. AutoCAD can be used directly, easier to operate 5. Surface finishing 1.5μ~2.5μ 6. The casting for the main machine bed is equipped with the high rigid HT250, which made by a famous Japanese manufacturer. Integrated structure design, all casting parts are made with the procedure of resin-send and twice heat treatment to improve the max load weight and keep a good precision for long time and avoid the distortion. 7. New designed three layer filter coolant system 8. Industrial computer: more stable, longer using life III). CONTROL SYSTEM Windows XP The controller equipped the auto cut Intelligent software, which integrates the program and control and based on Windows XP. This new designed auto cut software is the unique software for WEDM running on the condition of windows XP. (1)Coordinate system: Absolute coordinate, incremental coordinate (relative coordinate) (2) Functions of coordinate transforming, zooming in and zooming out, rotating and tracking display in real time (3)Functions of interpolation of straight line and circular arc (4)Function of taper processing: As above (5)Function of processing different top and bottom abnormities parts (6)Auto-handle for short circuit and wire-break (7)Functions of memorizing: unexpected power off, it can continue the processing automatically; auto-stop after processing (8)Functions of auto edge-touching position and auto center finding (9)Function of auto-adding transitional arc (Arbitrary angle) (10) Functions of menu technology and auto-programming ward (11)Functions of menu technology and auto-programming (12)AUTOCAD can be used to program directly in the software. 2. Using the PCI slot controller card, LCD Monitor and the High-tech Industrial computer. That greatly enhances the stability of control and greatly reduces the computer the failure rate. 3. Embedded Control system can be connected with many design software smoothly. 4. Variety of pulse power can be chosen, which is suited for a number of processing conditions to improve the cutting ability of the high precision parts. 5. With a large database storage capacity, user can choose the suitable parameter according to deferent working conditions. Users can adjust machining parameters to establish a database at any time according to their own experience IV). CNC system configuration and technical performances (1) CNC Hardware configuration: (A) Industrial Computer:P4 or above (B)EMS memory:1G (C)Fixed Disk:160G (D)USB and Internet (E) 15″liquid crystal display (LCD) (F) RS232 and Keyboard and mouse (2)CNC software and operation platform: (A) CNC Auto-program and control function (B) operation platform: Windows XP (3)CNC technical function: (A) 4 axis processing (B)Function of processing different top and bottom abnormities parts (4)Running environment (A) Temperature: 5-40 degree (B) Relative humidity：40%～80%.

Minimum Order: 1 bags

1. Technical specification Mechanical body Dimension of the machine 2040x1600x1830mm Weight of mechanical body 2000kg Dimension of work-table 590x440mm Distance between work-table and floor 900mm Travel X/Y 400x300mm Travel Z 250mm （manually） Working tank Dimension of work tank 960x550mm Work piece Maximum cutter head diameter (mm) 300mm Maximum cutter head width (mm) 0-50(See the optional mandrel part for details） cutter head Angle range (°) Back Angle 0-20, side back Angle 0-15, other angles are not limited, the distance between the two gears at least 15mm Type of cutting tools Wood floor molding Disc cutter、Clasp knife、Woodworking router、Furniture line knife Coordinates axis Ball screw of axes X/Y Φ32mm/ Bolt distance: 4mm Guide-way of X/Y Linear ball guide-way Motor of X/Y axis DC servo motor Location feedback of X/Y axis 2500 lines encoder The smallest differentiation rate of X/Y axis 0.001mm Software pitch compensation 5mm Universal force (angular deflection mechanism) Model TW40R angula , r deflection mechanism ±45° Maximum deflection Angle of U axis ±45° Tool effective deflection Angle ±15° U axis(option) Model TW40R Trav , el U 36x36 Maximum deflection Angle of U axis ±8° Side rear Angle Angle is recommended ≦±3° C axis Table diameter Φ100mm Distance from the bottom of the table 160mm Rotation Angle range ±360° Speed reduction ratio of rotation axis 100：1 Minimum resolution of rotation axis 0.001° Maximum speed of rotation axis 20r/min IP IP65 T , urntable weight 20kg Maximum load 15kg Maximum bearing 15Nm Wire-driving structure Motor AC velocity-measuring motor Velocity of wire 4 grades Wire-tighten mode Automatically Wire-loading mode Automatically/manually Dimensio , n allowed of wire Φ0.12~0.20 Min.:Φ0.07，Max.:Φ0.25 Tension control of wire constant tension Safety protection The handle pops out automatically Wire-break, Wire container stops up, Left and right limit Two times limit Water tank Dimension of water tank 900x500x570 (without pump) Cubage of water tank 180L Water tank pump power 0.37KW Dimension of filter paper φ100x190mm Accuracy of filter paper Normal filter adsorption Cabinet Standard power 3x380V 50/60Hz 2KVA Fluctuation allowed 380V±10% 50±1Hz Loaded fully current 3A Dimension 570x694x , 1830mm Weight 250Kg Filter net Stainless steel CNC Control system IPC system and CPU system Operation system Windows XP Hard disk (SSD) >64GB Display 15”LCD Typ , e of input MDI,USB,LAN Format of code ISO Programming Automati , cally/manual，program in machining Program software Novick CAD/CAM Keyboard Standard keyboard Standard mouse Standard mouse Language Chinese /English Controlling axes Four axes simultaneity Command mode Incremental/absolute Unit Inch/metric Interpolation Linear / arc Mini. Input 0.001mm Max. input 9999.999mm The smallest increment 0.001mm Coordinates system Mechanical and customer Coordinates of offset for pitch error 4 axes Assistance function Suggestive errors Sub-program The most layer: 9 the most nesting: 99 Prepare functions Center-finding /wire alignment/ edge-finding /set and return to reference /mechanical reference Programming Mirror image of axe X/Y, exchange of axes X/Y ,rotation, proportion Variable of program H register Machining Drawing-checking/ Machining-tracking Edit Set new file/Save file/Re-name file/ Delete file Power-cut automatically Save automatically when power-off/ resume automatically when power-on Remote control Have this function Programming during machining Have this function Multi-time cut machining program automatically Have this function Modify parameters of generator during machining Have this function Diagnosis Have this function（just for maintenance personnel） Error message is displayed in real time. Have this function Machining state is displayed in real time. Have this function Display the edition of software/ hardware Have this function Display date and machining time Have this function Configuration of machine parameters Have this function Remote control Function keys Display of axes X/Y/U/V/ Axis selection and movement / moving velocity and single /start pump/wire-driving/ moving velocity and single / start-stop- pause/return to origin / edge-finding-center-finding/set to origin Generator and machining Max. machining current 15A Max. machining velocity 300 mm2/min Best roughness Ra≤ 0.8μm

Minimum Order: 1 bags

HDPE / LDPE Twin Head High Speed Blown Film Machine-Dalian Jianda Plastics Machinery Co.,Ltd founded in 2000，is specialized in R&D and production of single, double, three, and five layers of plastic film blowing machine. We have 160 employees and 70% of them are senior technicians. The total area is 32000 square meters, the modern standard workshop covers 20000 square meters . We have advanced three-axis and four-axis linkage machining center, laser cutting machine, precision lathe, milling machine and other high-precision processing equipment. Over the years, Our products are well received by customers in more than 20 provinces in China, and have been exported to Russia, South Korea, North Korea, Malaysia, Indonesia, Vietnam, Guinea and other countries. Main products: film blowing machine, Blown film machine, film blowing machine China manufacturer, Blown film machine China factory, Double Layer film blowing machine, 3 Layer film blowing machine, Five Layer & Seven Layer film blowing machine, PP Film Blowing Machine, ABA Co-Extrusion Film Blowing Machine, PE shrinkable film Blowing Machine, FFS film blowing machine, Agricultural Ground film blowing machine, Waterproof Composite membrane film blowing machine, HDPE / LDPE Twin Head High Speed Blown Film Machine, LDPE/LLDPE/mLLDPE/EVA Blown film machine, ETC.

Minimum Order: 1 bags

WLL series CNC Spinning and Turning Machine Product Description WLL series CNC metal spinning machine(Single Roller) is especially developed to spin lamps, lamps, art wares，kitchen wares and auto fittings. It has many patents issued by the State Intellectual Property Office.This machine is practical, professional and strong. It has high production efficiency and can complete horn, bucket, cone type, parabolic products. It can also process threading, trimming, flanging and rolling at the same machine tool. The machine can spin many materials such as carbon steel, stainless steel,aluminum and copper etc. It has solved the traditional problems such as lack of skilled workers. With advanced digital control, it is easy to operate. The machine can improve the production efficiency, machining accuracy and saving the cost of human resources. It is the ideal processing machine for light, automobile, military, mechanic and other manufacturing industries. Model WLL-SRS350 Amount of Rollers 1+ Max.Diameter of Material Φ350 mm Max.Length of Work Piece 400 mm Thickness of Work Piece 0.5-2.0 mm(Aluminum,Copper) 0.5-1.2 mm(Carbon Steel) 0.5-1.0 mm(Stainless Steel) X Trave 300 mm Z Trave 380 mm Spindle Speed 4000 rpm Travel of Tailstock 300 mm Amount of Tools 2+2/ Optional Main Motor Power 3.7 kw Servo Positioning Accuracy 0.01 CNC Metal Spinning Lathe Machine｜Spin Forming Machine 1. It could also be equipped with manipulator which could do the automatic loading and unloading.  2. The machine is very stable with mature technology and now is highly recognized by customers from all over the worlds. 3. It can also process threading, trimming, flanging and rolling at the same machine tool. The machine can spin many materials such as carbon steel, stainless steel, aluminum and copper etc.  4. It has solved the traditional problems such as lack of skilled workers. With advanced digital control, it is easy to operate.

Gang Type CNC Lathe CK46 Product Description The Leichman CNC machine tool control system adopts Taiwan SYNTEC system, and other CNC systems are optional. The bed is inclined at 30°(CK46) / 45°(CK36), and the large carriage and the tool rest are placed obliquely, which makes the operation and chip removal of the machine tool very convenient. Item Unit CK36 CK46 Capacity Max swing over bed mm 400 450 Max cutting diameter mm 350 360 Max machining dia.(disk) mm 135 135 Max machining dia.(shaft) mm 220 220 Travel X axis travel mm 750 950 Z axis travel mm 270 290 Precision Spindle runout mm 0.004 0.004 X/Z axis reposition precision mm 0.002 0.002 Body structure Slant bed degree 45 45 Slant Bed Gang-Type CNC Lathe｜CNC Revolver Lathe 1. The base and the bed are integrally cast iron, which has strong shock resistance and is not easy to deform. 2. The appearance design of the CNC Revolver Lathe machine tool is beautiful, and it takes up less space. 3. The main shaft flange can be directly installed with a three-jaw self- centering hydraulic chuck or other elastic chuck. 4. Work piece clamping method: hydraulic. 5. The hydraulic supply unit of the machine tool has an enlarged fuel tank, better heat dissipation, and more stable work. 6. The X-axis and Z-axis adopts high-rigidity linear slides, and the calculation of the optimal span between the track and the track is achieved.  7. Low resistance, high rigidity, high precision, displacement speed up to 27m/min, improve work efficiency and shorten processing time.

Turning and Milling CNC Lathe CK46DY8 Product Description The CNC machine bed is integrally cast iron, and the machine bed is inclined at 30°, which makes the operation of the machine tool and chip removal more convenient. The X-axis and Z-axis adopt high-rigidity linear rails, and the optimized span between the rail and the rail low resistance, high rigidity, high precision and displacement speed up to 24m/min, improve work efficiency. Item Unit CK46DY8 Capacity Max swing over bed mm 420 Max cutting diameter mm 300 Max cutting length mm 220 Travel X axis travel mm 800 Y axis travel mm 255 Z axis travel mm 360 Precision Spindle runout mm 0.004 Spindle index position accuracy ±0.002° X/Y/Z axis reposition precision mm 0.002 Integral casting bed Bed tilt angle 30° Y-axis series Turning and Milling Composite CNC lathe｜CNC Lathe Milling Machine 1. The transmission part of the machine tool adopts high-precision Japanese THK ball screw and high-speed linear rail from Japanese THK. 2. Leichman CNC Lathe Milling Machine can be equipped with a 4+4 integrated power head, Y-axis and C-axis functions; it can realize turning and milling combined processing, making complex product processing easier, reducing the trouble caused by secondary processing and improving product accuracy. 3. The main shaft adopts Taiwan high-precision main shaft which contains Swiss SKF precision bearings.

Turret CNC Lathe CKD52 Product Description The CNC Lathe machine tool control system adopts Taiwan SYNTEC system, and it can also be equipped with CNC systems produced by other companies according to user requirements. The base and bed of the machine tool are integrally cast iron, which has strong shock resistance and is not easy to deform. The bed is inclined at 30°, and the large carriage and tool post are inclined, which makes the operation of the machine tool and chip removal very convenient. The appearance design of the machine tool is beautiful, and it takes up little space. Item Unit CKD52 Capacity Max swing over bed mm 500 Max. machining diameter mm 480 Max. machining length mm 380 Travel X axis travel mm 250 Z axis travel mm 400 Precision Spindle runout mm 0.004 X/Z axis reposition precision mm 0.002 Spindle Spindle speed rpm 4000 Chuck diameter inch 8 Spindle nose A2-6 Spindle bore mm 63 Max bar diameter mm 52 Slant Bed CNC Turret Lathe with Tailstock｜CNC Lathe with X Z Axis The main shaft adopts a high-precision main shaft, which contains Swiss SKF precision main shaft bearings. The main shaft flange can be directly installed with a three-jaw self-centering hydraulic chuck or other elastic chuck. The transmission part of the machine tool adopts the high-precision Japanese THK ball screw and high-speed linear slide of the well-known Japanese THK 35- type. The X-axis and Z-axis adopt the high-rigidity linear slide, and the track and the track are optimized through calculation. Span, low resistance, high rigidity, high precision, displacement speed up to 24m/min, provide work efficiency and shorten processing time.

A GLOBAL REPUTATION FOR LEADING-EDGE MANUFACTURING TECHNOLOGY. Suizhou Gaincin Machinery Co.,Ltd(info#GAINCIN.com.cn & showroom: gaincin.store.bossgoo.com)'s steel grinding media is a valuable commodity widely used in power stations for coal grinding, limestone grinding for flue gas desulphurisation, cement production, aerated building block manufacturing and in the mining industry, especially in gold, silver, copper and zinc mines.We also produce mild steel balls for use in ornamental ironwork to act as decorative finials on steel gates and railings. Rolled Steel Balls The major advantage of precision ball rolling, compared with traditional forging methods, is the uninterrupted grain flow. Grinding balls are rolled from selected carbon and alloy steels, produced to a customer’s precise specifications. A special feature of GAINCIN’s manufacturing process is the computerised quench facility, giving uniform surface hardness and controlled cross-sectional hardness essential for very even wear. Quality Control and Hardness Measurement In the long term, the effectiveness of grinding media must be measured by the final cost per tonne of product efficiently ground.GAINCIN's advanced manufacturing methods and materials guarantee the maintenance of the geometrical tolerances and correct structures vital to reliable, consistent performance and long life. GAINCIN’s products are rigorouslytested to ensure that they meet the agreed specifications. BALL HARDNESS:THRU HARD’OR‘TOUGH CORE’ GAINCIN’s expertise will ensure that you specify the most suitable grinding media for your particular application. GAINCIN’s ‘thru hard’ ball has a uniform high hardness from surface to core, thus maintaining very good wear properties down to very small diameters.The ‘tough core’ ball has a hard outer layer for long life, coupled with a tough, resilient core giving good impact resistance. Presenting the Hard Facts on Average Volumetric Hardness How hard is hard? The illustrations shown below tell an interesting story. Illustration ‘A’ shows an analysis of the cross sectional hardness of GAINCIN ‘thru hard’ ball. Illustration ‘B’ below shows the same analysis carried out on a ball from another major grinding media manufacturer. The ball in illustration ‘B’ has the same AVH figure as The GAINCIN’s ball and will wear out at the same time. Yet there the similarity ends. After three quarters of the radius, the hardness of the ‘B’ ball dips below that of GAINCIN’s ball. This brings into focus the area of greatest discussion about using AVH values. Over 72% of the final value is made up from the surface and 3/4 radius hardness readings. So AVH tells us relatively little about how a ball is going to perform once it has worn past that stage. The cross sectional hardness profile tells the full ‘inside story’. Q What kind of performance will the ball in illustration ‘B’ below give? A Once the ball has worn down to approximately 2/3 diameter, the remainder will wear away very quickly. Q How will this affect the mill output? A The rapidly wearing grinding media will give rise to an unstable and imbalanced ball charge, resulting in the possibility of more than one top up size being required to ensure the correct mesh of grind. Q How will GAINCIN’s ball perform? A The cross sectional hardness profile shows that GAINCIN’s ‘thru hard’ ball will wear evenly throughout its life. This will give a better size distribution in the mill, and avoid ‘dead zone grinding’. The shape of the ball will be preserved for much longer, giving a far more efficient grind. AVH =0.289 x Surface Hardness (S) + 0.437 x Hardness 3⁄4 R + 0.203 x Hardness 1⁄2 R + 0.063 x Hardness 1⁄4 R + 0.008 x Centre Hardness (C) The conclusions are obvious. High quality such as GAINCIN offers always saves money in the long run. Suizhou Gaincin Machinery Co., Ltd Address: no.1704,economic and technical development zone,Suizhou,P.R.China E-mail:Info@gaincin.com. , cn Kimy.Lee@gaincin.com.cn Tel: 86-722-358 8806 Fax: 86-722-358 8806 x 8002

Minimum Order: 10 long tons

4 Meter / Min Servo Motor Glazed Tile Roll Forming Machine new style cutter Details No 1 Total power 5.5 + 4 KW 2 Rows of rollers 18 Rows 3 Diameter OF shaft ￠70mm 4 Voltage 380V 50Hz 3phases 5 Thickness 0.6 mm Pressure tile machine equipment features: The device has the advantages of operation, maintenance, maintenance, mechanical debugging, easy mold replacement, etc. The whole unit automatic control system adopts a highly integrated network, which makes the performance of the automation system more superior; the device uses a high level of automatic control Software, to achieve the production of information management In the process of color plate straightening produced by tile press equipment, the profiles will move from top to bottom, left to right, and require the gap between the straightening mechanism and the profile to be relatively loose. There can be a certain gap between the straight body and the top, bottom, left and right surfaces of the profile. The gap size is between 0.01-0.05in (0.25- 1.25mm). If the straightening is torsionally deformed, the gap can be smaller. TEJA TOLEDO Glazed Tile Roll Forming Machine 0 Color steel tile equipment debugging 1. First of all, the four horns of the front and rear linings of the color steel press machine are the same from the height of the upper end of the shaft, and then from the first row to the last row, find a straight line, check, and Whether the axis is in a straight line, adjust the left and right sides of the lower axis to be level. 2, the first row and the last row of color steel tile machine equipment to find a good center, and then tighten the two sides to lock nut, in the middle of the center wheel before and after the pull a good line, the upper and lower axis clearance adjustment After that, you can adjust the machine straight. 3, color steel tile machine equipment - pressure tile machine pressure plate deviation debugging method, such as the plate running to the right, pad left (feeder), or fall to the right bottom level (the first axis off the first few axis The upper shaft falls with the bottom shaft). TEJA TOLEDO Glazed Tile Roll Forming Machine 1 Double layer machine features: 1. One machine and two uses: small floor space, convenient transportation, cost saving; 2. High production efficiency: two types of color steel tile can be produced at the same time. The production efficiency is greatly improved. 3, automatic production: the use of industrial PLC computer frequency control, automatic feeding, cutting a molding, easy operation and maintenance. TIPS: TEJA TOLEDO Glazed Tile Roll Forming Machine 2 How to operate the color tile machine correctly? Although there are many types of color steel tile machine, but the correct operation method is exactly the same. 1. After the installation of the color steel tile tile machine equipment is completed, first check whether certain fasteners are still fastened, because the long-distance transportation of the equipment may inevitably cause the fasteners to loosen. 2. After the steel tile tile machine equipment is connected to the power supply, check the positive and negative of a device to see if it needs to be inverted. 3. Fit the chain protection cover 4. Cut a 2 meter board, and turn on the board to make it go out smoothly, and listen to whether there is any change in the equipment. If there is a deviation, please fine-tune the direction of the feed rack. If there is no problem, you can start production.

Silicon steel is low carbon special steel ≤C(0.08%), Si(1.0～4.5%), its producing process is complicated and making cost is higher. It has characters of high magnetoconductivity, low coercive force and high resistivity and thus little loss of hysteresis and eddy current, the purity of silicon steel sheet must be high, sheet surface must be very flat and clean, silicon steel sheet covers 1% of whole steel production, whose main application is motors, transformers, electric appliances, meters, etc. In this condition, the processing equipment for silicon steel sheet must be very precise. Max yield strength: 450Mpa, max tensile strength: 600Mpa Hardness HV100-220, elongation 15% -45%

What is closed-loop cooling? A closed-loop water cooling system maintains optimal temperatures inside a sealed enclosure while keeping warm ambient air, moisture, dust and other airborne contaminants out. By circulating cool, clean air within the electrical enclosure (and through the heat-generating components), closed- loop cooling systems help protect sensitive electronic components and extend their life. In a typical closed-loop air conditioner, heat is transferred from the enclosure components by circulating air around and through them. The air is then cooled, dehumidified and returned to the enclosure without allowing air from outside the enclosure to enter. Heat is removed from the air inside the air conditioning unit and discharged through the vapor compression refrigeration cycle. Specification： Model：TY-35/110T Power Input：380v, 3ph, 50hz Cooling Capacity：175，000/550,000 kcal/h Fan Power：4kw x2 Fan Air Flow：80000 m3/h x 2 Spray Pump：3kw, 150m3/h, 5m Main Pump：15kw, 100m³/h, 36m (for Inductors or transformer)7.5kw, 50m³/h, 32m (for induction power supply) Inlet/Outlet：DN125/DN80 Working Pressure：0.1 to 0.3 MPa closed loop water cooling system Features:

Minimum Order: 1 bags

Billet/Bar Induction Total Heating Equipment Induction Heating Equipment Supplier Billets range from Φ25 to Φ150 and temperature range from 900℃ to 1300 ℃ can be performed by this induction heating line. Induction heating is widely used to heat metals prior to hot forming by forging. Progressive multistage horizontal heating is popular for small- and medium-size billets (usually less than 150 mm in diameter) TY Induction Billet Heating Systems for Forging enables today’s forging plants to heat up rapidly material while ensuring uniform temperature and high efficiency. TY Induction can offer a complete Billet Total Heating Induction Equipment with full-automatic or Semi-automatic material handling machine, water cooling system and temperature control. TY Induction Power Supplies use IGBT technology and LC series resonant circuit. 100% launch up under any load conditions and 24 hours operation. Self-Diagnostics with Fault LED’s & Alarm Indicator. Why Induction Heating? Induction heating is easy to set up, offers fast heat-up times, and provides superior heating efficiency, accuracy, and part temperature uniformity. In addition, induction offers safety advantages over open flame and resistance heating methods. Applications: Preheating and maintaining weld temperatures Hydrogen baking Post-weld heat treatment (PWHT) up to 1450° F Cold shrink fit-up processes Various other applications requiring heat Industries: Oil and gas Structural Power Plants Petrochemical/refineries Process/Powe , r Pipelines Pressure Vessels Shipyards

Minimum Order: 1 bags