Metal Processing Machinery

Hot dip galvanizing machine Technical Solution: Automatic spool wire pay-off system→ Natural gas online annealing furnace → Overflow water cooling cleaning → Environmental protection pickling → Overflow water cleaning → Flux galvanizing →Baking board drying treatment → Hot dip galvanizing → Clean → Water cooling → Trunk wire take-up system Wire diameter 0.9--1.6 mm Zinc coating thickness 200--350 g/m² Number of wires 40--70 lines Wire spacing 30 mm Annealing method Online annealing Zinc layer control Wipe system Wire pay-off system Wire spool Wire take-up system Elephant trunk or inverted coils type Hot dip galvanizing plant for wire specifications  The galvanized wire processed by this machine is suitable for a variety of industries.  For example: vegetable and fruit greenhouse, industrial tying, communication overhead line, greenhouse support, etc.

PCB developing machine, developer Hebei Ruisite Model No.: RST-PCB-001 Price: US$6,000-US$200,000 Min. order quantity: 1 Set Capacity: 50 Sets / Month Country of origin: Hebei, China Trade terms: FOB, CFR, CIF Payment terms: L/C, T/T Precision etching machine Product features 1. The development of independent pressure adjustment of the horizontal swing nozzle waterproof pool effect design, spraying more evenly, more fluid production. 2. The development of the configuration of mechanical (or vacuum) bubble- breaking device, to avoid defoamer pollution, effectively reduce the waste of liquid. 3. Precision compensation development design, effective control of pool effect, improve the uniformity of the board, etching line width line distance: 2mil/2mil, etching uniformity C.O.V ≥ 96%, etching factor ≥ 5. 4. Cone roller type membrane slag separation system, can be efficient and clean collection and processing of membrane slag. Equipment outside dimensions: 6848mm(L) * 2500mm(W) * 2500±25mm(H) (production speed is roughly proportional to the length of the equipment)

Common aluminum anodizing machine, anodiser, Hebei Ruisite Model No.: RST-LYH-001 Price: US$6,000-US$200,000 Min. order quantity: 1 Set Capacity: 5 Sets / Month Country of origin: Hebei, China Trade terms: FOB, CFR, CIF Payment terms: L/C, T/T anodizing machine Product features It is suitable for surface oxidation treatment of large quantity of aluminum tube workpieces, with intelligent open program and fully automatic PLC touch screen operation. 1. Production line can be fully automatic and semi-automatic conversion, scientific and reasonable design, compact, high degree of automation. 2. The system adopts "OMFO" system PLC to control the whole process of the production line, the control system with Lc as the main controller, using the human-machine interface for parameter setting and the control system is based on PLC as the main controller, using the human-machine interface to set parameters and switch the auxiliary equipment. It can display the whole production line, working status, fault message alarm, production speed, each function, etc. 3. The Common anodizing production line is custom designed according to the technical process and equipment requirements of the anodizing equipment provided by the customer. The whole line design program follows the design principles of high efficiency, intelligence, environmental protection, energy saving and stability, and is optimized in terms of equipment process configuration, automatic control, frame structure, tank production, piping arrangement and auxiliary machine selection.

PCB plating machine line Hebei Ruisite Model No.: RST-PCB-001 Price: US$6,000-US$200,000 Min. order quantity: 1 Set Capacity: 5 Sets / Month Country of origin: Hebei, China Trade terms: FOB, CFR, CIF Payment terms: L/C, T/T Description 1. Automatic PCB plating production line, economic and efficient, flexible and practical, you can change the process sequence as well as each station stay, drip, delay time. Realize different process combinations to adapt to the plating requirements of different substrates or different products. 2. Accurate, stable and reliable. The production line adopts PLC (programmable controller) to monitor the operation of the traveling car in real time, and also to monitor the automatic execution of the set parameters of the whole line in real time. And it can be connected with computer for automatic data management of production, i.e. DMS system. 3. Gantry type traveling crane or cantilever type design, the lifting of the traveling crane adopts nylon reinforced belt, the noise is extremely low and no lubrication is needed when using. The lifting capacity of the traveling crane ranges from 50Kg to 1000Kg, and all of them adopt imported brake motors.

Continuous wire plating machine Model No.: RST-LXD-001 Price: US$6,000-US$200,000 Min. order quantity: 1 Set Capacity: 5 Sets / Month Country of origin: Hebei, China Trade terms: FOB, CFR, CIF Payment terms: L/C, T/T Contninuous plating machine line Product Features 1. Continuous plating machine line is also called roll-to-roll production line. The more commonly used galvanized iron wire production line includes two kinds of processes: electro-galvanized and hot-dip galvanized. 2. Electro-galvanized iron wire is made of high quality low carbon steel as raw material and processed by drawing and galvanizing processes. With the characteristics of galvanized layer, strong corrosion resistance and strong galvanized layer, electric galvanized iron wire is widely used in construction, highway fencing, flower tying, weaving and other industries. 3. Hot-dip galvanized iron wire is made of high quality carbon structural steel, drawn and galvanized iron wire. Hot-dip galvanized iron wire is widely used in the manufacture of wire mesh, highway fences and construction projects. It has the characteristics of thick plating, strong corrosion resistance and firm plating.

Barrel plating machine for zinc copper nickel tin chrome gold silver Model No.: RST-GDX-001 Price: US$6,000-US$200,000 Min. order quantity: 1 Set Capacity: 5 Sets / Month Country of origin: Hebei, China Trade terms: FOB, CFR, CIF Payment terms: L/C, T/T Barrel plating machine line Product features Barrel plating is suitable for workpieces that cannot or should not be mounted for plating due to shape, size and other factors. It saves labor, improves labor productivity, and improves surface quality of plated parts. 1. Designed for barrel plating copper and tin products, small workpieces up to 0.1mm needle-shaped small pieces. 2. The roller is designed with three slots as one, with precision mesh sheet type roller L1500*diameter 500 (mm) and 24V/3000A high frequency pulse special power supply. 3. The whole line are designed with automatic exchange crane, fully automatic PLC program centralized control, open program simple and flexible operation. 4. Designed with 4 gantry-type traveling cranes, the supporting frame is made of SUS304.

Zinc plating is a type of plating that offers better protection, inexpensive, simple operations, and an easily achievable plating process. It is currently the most extensive & economical measure to prevent corrosion of steel. Mainly used in the field of corrosion protection and decoration of mechanical parts, wires, metal sheets, fastening joints, electrical components and instrument meter chassis. Zinc plating machine line Product Features: 1. Gantry type zinc electroplating machine line is a linear plating equipment line, which has a more flexible process arrangement, and each tank can be reciprocated or jumped. The loading and unloading can be done at the same end or separately at both ends. 2. It adopts human-machine interface touch screen control system, with high automation procedure, screen display and touch screen control, and can set different procedures according to customer's requirements. 3. The control circuit is advanced in design, with imported photoelectric proximity switch and multi-way travel switch protection to ensure reliable operation and the time can be adjusted as needed. 4. The line has a reasonable design, compact structure and simple operation, which improves working efficiency.  5. Saves energy consumption and increases profitability, and can plating various sizes of workpieces. https://www.electroplatingmachines. , com/

Square Pipe Polishing Machine use to polish the surface of square/ rectangle pipes mirror finishing, matte finishing, sand finishing , hairline finishing Using flap wheels, cloth wheel, sisal with cloth wheel,wind cloth wheel and polishing wax to polishing tube surface. Square Tube Polishing Equipment characteristic: Hand wheel  adjustment, easily operate , improved working efficiency heightening motor, easy for maintenance and replacement  thick steel plate whole welding ,more firmer installed dovetail slider, polishing smoothly , polish effects better steel plate milling & aging treatment speed controlled by frequency conversion motor ,power saving  Machine Parameter Polishing Head 12 head / 16 head / 28 head / 32head / 36 Head  Pipe material Stainless steel , Carbon steel , Aluminum etc. Pipe thickness  0.3-5.0mm Pipe size 10x10-100x100mm / 100x100-200x200mm Capacity 0-50m/min  Power Customized or Fix 5.5 KW whole polishing machine Operation 1 person operate two polishing machine

Square Pipe Polishing Machine use to polish the surface of square/ rectangle pipes mirror finishing, matte finishing, sand finishing , hairline finishing Using flap wheels, cloth wheel, sisal with cloth wheel,wind cloth wheel and polishing wax to polishing tube surface. Square Tube Polishing Machine/Equipment characteristic: Electricity button / Hand wheel  adjustment (TWO WAY), easily operate , improved working efficiency heightening motor, easy for maintenance and replacement  thick steel plate whole welding ,more firmer installed dovetail slider, polishing smoothly , polish effects better steel plate milling & aging treatment speed controlled by frequency conversion motor ,power saving  Hotech Square Pipe Polishing Machine use to polish the surface of square/ rectangle pipes mirror finishing, matte finishing, sand finishing , hairline finishing 

SS409/SS430 Pipe Welding Machine for Auto-exhaust Pipes, the tube manufacturing machine has high precision and high yield. Brand: Foshan Hotech Payment: T/T, L/C Delivery:40-60 days Shipping: By sea Steel Pipe/Tube Making Machine can produce steel pipe/tube with ss materials and ms,gi materials such as 316,304,409,3201,202,Q235. our pipe/tube making machine is W forming , in the welding section we will weld the pipe. SS Tube Mill Machine is used to produce Furniture tube such as chair foot,table foot etc. Construction tube such as Hand railing, Building support tube, Water tube, Chimney tube, Door tube; Industrial tube such as Exhaust tube, NB tube, Condenser pipe, Sanitary tube etc. Steel Pipe Tube Manufacturing Machine characteristic: Stainless Pipe Milling Machine is equipped with cutting-edge technology that ensures precise and accurate milling. With its advanced features and robust construction, you can effortlessly create smooth and seamless pipe surfaces, bringing your metalwork projects to a whole new level. 1. The whole Stainless Pipe Milling Machine is welded by Q235 steel plate, world's top five hundred BAOSTEEL material, machine vibration aging treatment. 2. Hotech follows Taiwan technology, provide stable structure design. 3. All the key parts are processing by CNC machine centre to ensure the precision of equipment . 4. Adopt NJ130/Dong Feng auto transmission, enhanced turbine gearboxes, ensure stability of transmission system. 5. SS Tube Mill Machine can be customized by customer's requirements. The automobile exhaust tube general to use SS409 / SS409L / SS430 /S40903/ S40800 materials. https://www.ho , techtubemill.com/

high-speed tool steel manufacturers-Dalian Yongbao New Material Technology Co., Ltd founded in1999, it covers an area of 20,000m², construction area is 12,000m², a private enterprise which set smelting, electroslag remelting, forging, steel rolling. Our company produces high speed tool steel, die steel, stainless steel, precision alloy, high temperature alloy, corrosion resistant alloy, welding strip, welding wire, ingot, forging, hot rolled material, cold drawn material and cobalt series (M42, M35, etc.) tungsten series (W18, W6, W9, W4, M2Al, etc.) die steel (4Cr5MoSiV1-H13Cr12M1V1, CR) 12MOV, etc.) we developed various special shaped products of HSS, widely used in sawing products, high-end wood planer blades, automotive blades, air conditioning sliders, sewing machine blades and other fields, has grown into our core products. China tool steel, China high speed steel. The company has 12 product invention patents, 4 utility model patents, 9 mold steel, tool steel production line software copyright patents, and passed the ISO-9001 international system certification in 2009.

Inner Race Milling Machine QYXB125 Product Description Single station inner race milling machine with one-time clamping and processing of multiple BJ/UFJ/SX/DOJ grooves, 20-65 mm processing of groove diameter, which is suitable for the milling of inner race. High efficiency, hard milling instead of grinding，it can carry with truss or joint robot and automatic line. Technical Parameters ITEM QYXB125 Max Clamping Diameter, mm Ø35 Max Work piece Height, mm 60 Groove Diameter Scope, mm Ø20-Ø65 Diameter Of Steel Ball Scope, mm Ø12.7-Ø22 Quickly understand how to choose a rolling machine We have 30,000 square meters of standard workshops and modern parts processing, complete machine assembly, test and inspection, painting and other technological equipment. The sales and service network covers all major industrial towns and manufacturing areas in the country, and has agencies in the UK and Southeast Asia to ensure efficient and efficient services for customers.

Slanting Facing and Centering Machine SZ820530/SZ820550 Product Description Both ends of the one clamping are processed at the same time, the slanting facing and centering machine with 100-500 mm workpiece length is suitable for milling, chariot, drilling center hole, drilling, tapping, boring, reaming, grooving package of all kinds of slender, irregular and stepped parts. High coaxiality, high efficiency, chip easily, it can carry with truss or joint robot and automatical line.  Technical Parameters ITEM SZ820530 SZ820550 Clamping Diameter Scope, mm Ø15-Ø50 Ø15-Ø50 Workpiece Length Scope, mm 100-300 200-500 Max Center Drilling Clamping Diameter, mm Ø20 Ø20 Max Milling Amount(One Side), mm 4 4

Inner Race Groove Grinding Machine QMB125 product description Inner race grinding machine with one-time clamping and processing of multiple BJ groove, 20-65 mm processing of groove diameter, which is suitable for the precision grinding of inner race. High precision, high efficiency, it can carry with truss or joint robot and automatical line. Cnc machine Technical Parameters ITEM QMB125 Max Clamping Diameter, mm Ø75 Max Workpiece Height, mm 60 Groove Diameter Scope, mm Ø20-Ø65 DiameterOf Steel Ball Scope, mm Ø12.7-Ø22