Other Metal Products

The standard refers to the American ASTM or ASME standard with new and unique technical clauses added, which is suitable for a type of petrochemical fasteners used in high temperature and high-pressure environments, including bolts, studs, nuts, etc. The mechanical properties and materials specified in GB/T3098/8 "Mechanical Properties of Carbon Steel Fasteners Part VIII Heat-resistant Threaded Connections" are suitable for fasteners that can withstand high temperature, alternating loads, and to a greater extent. Be sure to tighten the axial force. High temperature and high-pressure petrochemical fasteners - commodity fasteners and special fasteners 1. Common Commodity wind energy fasteners: ●The type and size of hexagon head bolts meet the requirements of GB/T5782, A and B grades. The mechanical properties of these petrochemical fasteners refer to the performance grades of carbon steel bolts according to GB/T3098/1 standard: A2-50, A4-50, A2-70, A4-70; ●The nut type conforms to GB/T6170 I-type nut and special nut (pipe flange nut). Its mechanical properties refer to the performance grades of carbon steel according to the GB/T3098/2 standard: grades 6 and 8; the performance grades of stainless steel nuts of GB/T3098/15 are A2-50, A4-50, A2-70, A4-70 ; 2. Special Petrochemical Fasteners: ●In order to be suitable for the conditions of high-temperature resistance, low-temperature resistance, and environmental corrosion resistance, formulate suitable special fasteners, such as full-threaded studs for pipe flanges, in accordance with the provisions of GB/T901. The dimensions of hexagon head bolts and nuts shall be carried out according to national standards. ●Selected materials (grades) include medium carbon alloy steels: 35CrMo (applicable temperature +100-525℃); 25Cr2MoV (applicable temperature>-20- -575℃); 42 CrMo (applicable temperature +100-525℃). The strength is between 690~890Mpa, that is to say, the medium carbon alloy steel is tempered at high temperature (550℃<=tempering temperature<=600℃) to obtain comprehensive mechanical properties to meet the service of high-temperature environment. ●Stainless steel materials selected are: 0Cr18Mi9 (applicable temperature -196--800 ℃); 0Cr17Mi12Mo2 (applicable temperature +196--800 ℃); the strength of stainless steel material obtained by solution treatment is between 690~890Mpa, and the performance level is A2- 70 A4-50 A4-80 grade. ●Using American standards, using stainless steel grades and materials: ASTM A193 B8 CL.2 (for temperature +196-525℃); A193 B8M CL.2 (for temperature +196- 525℃); A453660 (for temperature +29- 525℃); also includes A320L7 suitable for low temperature and high-pressure environment (applicable temperature -100℃). ●Special grade nut material (grade) can choose medium carbon alloy steel: 30CrMo, 35CrMo; guaranteed load There are many fastener manufacturers, but we are one of the best choices for you.

Commodity : Electric Motor Scrap Material:Electric Motor Grade :AA Al (min ):99%-99.97% Condition: Not Working & working Contents : consist of aluminium case, with full copper contents. Materials: Pumping Machines/ Alternators Voltage : 380V Frequency: 50/60HZ Duty/Rating: Continuous(S1) Insulation class: B Protection class: IP54 Cooling method: IC0141 Packing: Average 21 MT in 20' HC containers Ambient temperature: -15C<q<40C Altitude: altitude should be lower than 1000 meters above sea level Color:Multicolor Secondary or not:Non-secondary Metal:Nonferrous Metal Copper Content: 2kg per Motor scrap

Minimum Order: 500

Product Description Product name: silver liquid mercury Purity: 99.99% Physical state: liquid Packing Metal bottle of 34.5kg net weight ( With 34.5 kg in each flask, then package in wooden boxes) Shipment type 20ft containers ( 20 tons per container) / Truck delivery (locally),Air freight. Loading: 580 Flask per container ( 34.5kg per Flask)

Minimum Order: 500

The red liquid mercury is a semi-liquid material cherry-red. The intensity of red liquid mercury is very high 20.2 g/ cm3. This Hg2 Sb207+O liquid is the Military Labs Material: Red liquid mercury Other name: Cherry Red liquid mercury Formula: Sb2O7Hg2+O Appearance: Cherry Red metal liquid Application: Mainly used in rocket, missile, military prospecting areas. The chemical`s specification: Molecular Formula : Hg2O8Sb2 Type: …. Pure red liquid mercury frame: …. Sb2O7Hg2+O Quality: ….Fluid, Semi liquid Purity:……99.9999999% Color :……Ponceau (Cherry red Homogeneous ) Density : 20.2gram Gamma value: 0.056 MG: 196.01 + _0.02/moi water content Form: Liquid scroll-like Color: Cherry Red Molar mass of Hg2Sb2O7+O is 772.6996 g/mol Net Weight: ….. 10 Gram Sealed We have all our analyses certificates and accreditations for our products.

Minimum Order: 500

Tin Copper Solder Wire is made of high-purity Tin material, with bright surface, high purity, good wetting and expansion ability, firm welding, no spatter and smoke. Convenient and easy to use, high efficiency and energy saving more worry. Widely used in electronic products, precision instruments, household appliances, instruments, automobile manufacturing, etc. All products are strictly tested by the third party, and all products are in line with the European Union ROHS certification. Element Sn96.5Ag3.0Cuo.5< , br>Port Qingdao, Shanghai, Tianjin, Shenzhen, etc. Certificate ISO, etc. Payment method T/T,Western Union,L/C,etc. Diameter 0.5-5.0（mm）,or as required Package Standard export packaging or as required. Application It can be used as a coating material and has a wide range of applications in food, machinery, electrical appliances, automobiles, aerospace and other industrial sectors. Tin wire is rolled up one by one,and the weight is 800g/roll,1000g/roll, etc. Or according to customer requirements,contactbusiness personnel for specific prices,subject to real-timequotations.

Minimum Order: 1 bags

We supply AZ91D, AM60B magnesium alloy of various sizes. Suitable for semi- solid machine (thixo) production and processing parts. SPECOFICATIONS OF MAGNESIUM ALLOY POWDER Composition（%） Brand Standard Al Zn Mn Fe (max) Be (ppm) Si (max) Cu (max) Ni (max) Ca Na AZ91D ASTM 8.5-9.5 0.45-0.90 0.17-0.4 0.004 5-15 0.05 0.026 0.001 VW030 ASTM 7.0-8.5 0.30-1.0 0.10-0.30 0.004 5-15 0.2 0.08 0.01 AZX211 ASTM 1.7-2.1 0.8-1.0 0.2-0.4 0.005 8-13 0.04 0.003 0.002 0.55-0.75 0.002 AM50A ASTM 4.5-5.3 0.15max 0.28-0.5 0.004 6-15 0.05 0.008 0.001 AM60B ASTM 5.6-6.4 0.2max 0.26-0.5 0.004 5-15 0.05 0.008 0.001 As a magnesium supplier, YiRui Metal adopts advanced equipment with solid techniques, our high quality products are strictly tested before being put into the market. Have the ability of R & D and creation in raw materials. A perfect product chain of magnesium melting---magnesium processing---magnesium recovery. We have 10 die-casting machines (450ton-1600ton), and capable of surface treatment of various die-casting parts, as well as independently designing and manufacturing die-casting mold. If you want to know more kinds of magnesium metal products, please visit our website.

We can provide the service of die casting magnesium, provide the related magnesium alloy parts according to the customer's requirements, and also can produce to meets the customer's needs. INFORMATION OF MAGNESIUM ALLOY DIE CASTING Cold type magnesium alloy die casting machine(Thixo) 250T/2 sets. 500t/2 sets , 1200t/2 sets and 1600T/2 sets. Die Casting Properties of Magnesium Alloy Die-casting magnesium metal alloy is similar to die-casting aluminum alloy and die-casting zinc alloy, with low liquid viscosity, good fluidity and easy filling of complex cavities, and can be used for die-casting thin-walled parts without defects such as hot cracking and insufficient pouring. The melting point and latent heat of crystallization of magnesium alloy are lower than those of aluminum alloy, and its solidification speed is fast after mold filling, and its productivity is 40%~50% higher than that of aluminum die casting, up to twice that of die casting aluminum. In the process of die- casting, the thermal shock to die-casting die is smaller than that of aluminum alloy, so it can be used for die-casting thin-walled parts without defects such as hot cracking and under-casting, and it is not easy to stick to die, and its service life is 2~4 times longer than that of aluminum alloy. Magnesium alloy die-casting basically does not react with iron, and it is not easy to stick, which reduces the thermal fatigue of die-casting die. Its service life is 2~4 times longer than that of aluminum alloy. At the same time, it does not erode the steel crucible, thus avoiding the pollution of the crucible to the magnesium alloy liquid. If you want to know more kinds of magnesium material, please visit our website.

The bright future of the magnesium market benefits from the transformation and level-up of China’s automobile industry, like 3C and other industries. Among them, the lightweight meets the environmental protection needs, all the good things for the wide use of magnesium ingots, especially the development of new energy vehicles and its own full circulation and infinite recycling. WHAT IS MAGNESIUM ALLOY USED FOR? Good lightweight, cutting, corrosion resistance, shock absorption, size stability and impact resistance enable magnesium alloys to be used in a wide range of fields, such as transportation, electronics, medical, and military industries, and this trend will only increase but not decrease. Especially in 3C products (Computer, Consumer Electronic products, Communication), high-speed rail, automobile, bicycle, aerospace, building decoration, hand-held tools, medical rehabilitation equipment and other fields. MAGNESIUM ALLOY ADVANTAGES Low density, high strength and good rigidity. The rigidity of magnesium alloy increases with the increase of thickness, so the good rigidity of magnesium alloy is very beneficial to the design of the whole component. Low heat capacity and fast solidification speed MG alloy is a good die-casting material, which has good fluidity and rapid solidification rate can produce parts with fine surfaces and clear edges and corners and can prevent excessive shrinkage to ensure dimensional tolerance. Good toughness and strong shock absorption Magnesium metal alloy has high damping capacity and is an ideal material to avoid workers' fatigue caused by vibration and noise. As professional magnesium alloy manufacturer, we can offer kinds of magnesium alloy for sale, and the magnesium alloy price is affordable, if you have needs, please contact us. If you want to find a reliable magnesium supplier, please choose us, and we will do our best to meet all the needs of customers.

We supply high quality AZ91D series magnesium alloy, weight of 6KG and 12KG. Other specifications needs to be customized in advance. SPECOFICATIONS OF AZ91D MAGNESIUM ALLOY Composition（%） Brand Standard Al Zn Mn Fe (max) Be (ppm) Si (max) Cu (max) Ni (max) Ca Na AZ91D ASTM 8.5-9.5 0.45-0.90 0.17-0.4 0.004 5-15 0.05 0.026 0.001 VW030 ASTM 7.0-8.5 0.30-1.0 0.10-0.30 0.004 5-15 0.2 0.08 0.01 AZX211 ASTM 1.7-2.1 0.8-1.0 0.2-0.4 0.005 8-13 0.04 0.003 0.002 0.55-0.75 0.002 AM50A ASTM 4.5-5.3 0.15max 0.28-0.5 0.004 6-15 0.05 0.008 0.001 AM60B ASTM 5.6-6.4 0.2max 0.26-0.5 0.004 5-15 0.05 0.008 0.001 AZ91D Magnesium Alloy Features MG AZ91D is mainly cast by pressure die, which is characterized by high specific strength and greatly improved corrosion resistance compared with pure magnesium. It is mainly used for shells of electrical products, small-sized thin or special-shaped supports, etc. If you want to know more about az91d price, please contact us. There are many magnesium manufacturers in China, but we are one of the best choices for you.

AM60B series magnesium alloy is suitable for automotive parts and power tools, we got 6KG long term stock, 12KG and other specifications needs to be customized in advance. Specifications of AM60 Magnesium Alloy Composition（%） Brand Standard Al Zn Mn Fe (max) Be (ppm) Si (max) Cu (max) Ni (max) Ca Na AZ91D ASTM 8.5-9.5 0.45-0.90 0.17-0.4 0.004 5-15 0.05 0.026 0.001 VW030 ASTM 7.0-8.5 0.30-1.0 0.10-0.30 0.004 5-15 0.2 0.08 0.01 AZX211 ASTM 1.7-2.1 0.8-1.0 0.2-0.4 0.005 8-13 0.04 0.003 0.002 0.55-0.75 0.002 AM50A ASTM 4.5-5.3 0.15max 0.28-0.5 0.004 6-15 0.05 0.008 0.001 AM60B ASTM 5.6-6.4 0.2max 0.26-0.5 0.004 5-15 0.05 0.008 0.001 Now the az91d magnesium alloy price is affordable, if you have needs, please contact us. As a magnesium supplier, we can offer sorts of magnesium material for sale, if you have needs, please contact us.

Suitable for auto parts, we got 6KG long term inventory. Other specifications needs to be customized in advance. SPECOFICATIONS OF AM50A MAGNESIUM ALLOY Composition（%） Brand Standard Al Zn Mn Fe (max) Be (ppm) Si (max) Cu (max) Ni (max) Ca Na AZ91D ASTM 8.5-9.5 0.45-0.90 0.17-0.4 0.004 5-15 0.05 0.026 0.001 VW030 ASTM 7.0-8.5 0.30-1.0 0.10-0.30 0.004 5-15 0.2 0.08 0.01 AZX211 ASTM 1.7-2.1 0.8-1.0 0.2-0.4 0.005 8-13 0.04 0.003 0.002 0.55-0.75 0.002 AM50A ASTM 4.5-5.3 0.15max 0.28-0.5 0.004 6-15 0.05 0.008 0.001 AM60B ASTM 5.6-6.4 0.2max 0.26-0.5 0.004 5-15 0.05 0.008 0.001 As a magnesium supplier, we can offer sorts of magnesium metal for sale, anything you need, please leave us a message.

YIRUI MAGNESIUM METAL PRODUCTS As one of magnesium manufacturers, Nantong Yirui Metal was founded in 2012. After years of development, the company has become a supplier of magnesium alloy raw materials and a processor of magnesium and aluminum alloy die casting, which integrates smelting, recycling, and processing of nonferrous metals. Our products are widely used in transportation, 3C electronics, aerospace, and other fields. TYPES OF MAGNESIUM MATERIALS FOR SALE Magnesium Metal 1. scale stability 2. remarkable cutting performance 3. high shock absorption performance 4. lightweight 5. high heat dissipation 6. remarkable die-casting performance 7. recyclable for reuse. Magnesium Alloy Magnesium alloy has good lightweight, cutting, corrosion resistance, shock absorption, size stability and impact resistance, far superior to other materials. Magnesium Waste & Scarp The lower production cost, the better environmental protection. Magnesium Alloy Die Casting Magnesium alloy has the advantages of being lightweight, having high specific strength and specific stiffness, good shock absorption, excellent shielding and thermal conductivity, good forming, easy recovery and many other advantages.

Jinitan's end feed copper fittings for plumbing and ACR systems have been at the leading manufacturer of copper fittings in China. Available in both ASME B 16.22 and EN 1254-1 Standard, our end feed fittings can be used in both residential, commercial and HVAC systems. Available I.D.sizes ranging from ¼" to 6". Our company, a leading specialist in quality accessories, has received various certifications in many markets such as WRAS, KITEMARK, AENOR, SABS, UPC, CUPC, NSF, NF, WATERMARK, and so on. We are very specialized in the production of copper end feed fittings. If you need it, please contact us. Copper End feed fittings Advantages Easy to install Safe and reliable High temperature and high pressure resistance High cleanliness Jintian copper, as an excellent copper busbar supplier, offers a wide range of copper tube for you to choose from.

Minimum Order: 2 barrels

We can supply HMS 1&2 metal scrap. Minimum order quantity 1000 MT. Maximum order quantity per month 500,000 MT. Origin – Russian Federation. Loading port – Novorossiysk or Vladivostok. Payment terms - Transferable or Non- Transferable SBLC MT760 OR Transferable or Non-Transferable DLC MT700. Seller provide 2% performance bond. Price – CIF $290 Per MT ASWP. Send your orders. We will get back to you within 1 hour.

Minimum Order: 1000