Mechanical Hardware

1.Body: ductile iron 2.Disc: ductile iron 3.Stem: SS410 4.Seat:EPDM 4.Pin: SS416 5."O" ring: NBR 6.Bushing: PTFE 8.Size:DN100-DN2400 9.Pressure:PN6-PN25 , 10.Suitable temperature:-10-80︒C 11.Pressure:PN10 PN16 PN25 13.Size:DN100-DN2000

Minimum Order: 5 dozens

Common faults: 1. Repeated prompt during startup: This situation may be caused by an obstacle sensing at the moment of startup. Turn off the power again, remove the obstacle, and then restart; It is also possible that the sensitivity of the sensor has been adjusted too high, causing the indicator light to stay on and requiring a lower adjustment 2. Poor dialogue effect and no response; Is the volume of the conversation turned off, the network poor, and the environment too noisy, 3. Not turning on: The indicator light on the switch is also off, possibly due to the fuse burning; The indicator light is on and the machine cannot be turned on. Check if the charger has burned down 4. No power storage; Need to replace battery

Minimum Order: 1 bags

EX200 Series Elastic Expansion Joint Fluid medium Water, liquid Pressure Ratings DIN PN16~PN25 ANSI 150LB Temperature Range -10℃~+420℃ Connection standard DIN ISO NPT BS GB Size Range DN15~DN800 We are professional China Expansion Joint supplier,we mainly produces butterfly valves, eccentric semi-ball valves, regulating valves, diamond regulating valves, exhaust valves and hydraulic control valves and other 1000 categories of valves.

Minimum Order: 1 bags

F900 Series Y Type filter Size Range DN50～DN800 Temperature Range -20℃～220℃ Connection standard ANSI·DIN·BS·GB Connection Type Flanged Body Materials Cast iron；Ductile iron Filter 20-hole stainless steel filter Cock material Wrought iron China Y Type Strainer factory Features and Benefits The opening size of the filter screen is 3 times the size of the main road, which effectively reduces the flow resistance. ·High-strength stainless steel filter screen prevents water impact deformation. ·The surface and interior of the valve body are coated by China Y Type Strainer supplier with epoxy resin, and the sealing packing meets the hygienic standard. ·The valve body is equipped with a machined valve seat, and a threaded valve seat is configured in the valve cover, which is convenient for the accurate alignment of the filter screen. ·The filter screen is equipped with a special trumpet-shaped opening at the upstream port, and the unique structure makes the fluid not hindered when passing through the filter. ·Optional with quick sewage switch device, easy to clean the dirt.

Minimum Order: 1 bags

EV2000 Series Flow Regulating Valve Fluid medium Water, oil, gas, etc. Temperature Range -20℃～220℃ Pressure Ratings PN0.6～6.4MPa Size Range DN100～DN2200 Connection Type Flanged Connection standard GB·ANSI·DIN·ISO·BS Valve Life 50 years Body Materials Ductile iron；Carbon steel；Stainless stee Valve seat material Stainless steel Sealing surface material Stainless steel；Rubber Inner part material Stainless steel Features and advantages EV2000 series of regulating valve body by double sealing metal and elastic material, adopting axisymmetric shape design, so that the valve cavity flow area is always ring contraction, avoid throttling the exit to the axis, eliminating cavitation and vibration of pipelines and pipeline damage. Ideal for geometric design, the fluid is well guided within the streamline body. Even in the case of high pressure, the Cone Fix Valve can effectively eliminate the differential pressure, the pressure reduced to low pressure, and will not produce vibration and cavitation phenomenon. From the entrance to the contraction section of the annular flow area of the continuous decline in the flow rate gradually increased, without cavitation, without cavitation damage energy conversion. Regardless of the position of the piston, the flow profile is annular, thus ensuring a perfect linear regulation characteristic.

Minimum Order: 1 bags

F800 Series Cast Iron Ductile Iron Ball Valve Size Range DN50～DN200 Temperature Range -20℃～220℃ Connection standard GB·ANSI·DIN·BS Body Materials Cast iron；Ductile iron Ball material Stainless steel Stem material Stainless steel China Ball Valve manufacturer Features and advantages ·Two-piece structure, carrying blowout prevention valve stem, full bore design, reducing fluid resistance. ·The surface and interior of the valve body are coated with epoxy resin. To ·Stainless steel valve stem ensures that the work will not be affected by the side thrust generated by the high-pressure fluid. ·Stainless steel valve ball by China Ball Valve supplier reduces the wear of parts and prolongs the service life. Teflon valve seat, adjustable packing nut. ·The two-piece structure is easy to maintain. The PTFE valve seat and PTFE packing rod can be repaired quickly after disassembling the bonnet assembly. Slight valve seat wear can be repaired by disassembling the stack.

Minimum Order: 1 bags

ED500 Series Eccentric Ball Valve Fluid medium Water, oil, gas, etc. Temperature Range -29～425℃ Pressure Ratings PN1.0～6.4MPa Size Range DN100～DN3000 Connection Type Flanged Connection standard GB·ANSI·DIN·BS China Semi-ball Valve factory produce Valve Life 50 years Body Materials Ductile iron；Stainless stee；Cast steel Sphere material Ductile iron；Cast steel；Stainless steel Sealing surface material EPDM；NBR；Stainless steel China Semi-ball Valve supplier Features and advantages When fully open, the water loss is zero, the flow channel is completely unobstructed; the inner cavity is automatically cleaned, the valve core rotates 90 degrees, the inner cavity of the valve body is automatically flushed, the sundries in the medium are cleaned, and the medium can not be deposited in the valve cavity. The ball is hemispherical circulation has the highest CV value, and enhance the system efficiency of the pump, and the lowest degree of abrasion. Because the ball is hidden on one side of the valve cavity, the flow passage is formed without flow resistance, and the eccentric eccentric shaft is fixed firmly.

Minimum Order: 1 bags

EX700 Series Expansion Joints Fluid medium Water, oil, gas, etc. Temperature Range -10℃～120℃ Pressure Ratings PN1.0～2.5MPa Size Range DN25～DN4000 Connection Type Flanged；Welding；Thread Connection standard GB·ANSI·DIN·BS Valve Life 50 years Body Materials Carbon steel；Stainless stee；Ductile Iron China Expansion Joint manufacturer Features and advantages The EX700 series includes AY gland loose compensation joint, AF flange loose, BY gland loose joint compensation limit compensation joint, BF flange loose limit compensation connector, CF flange loose force compensation joint and D type large deflection loose tube compensation joint and other forms, meet the different working conditions. China Expansion Joint factory reasonable product structure design, reliable sealing performance, easy installation and disassembly. The utility model has the advantages that the utility model can freely stretch in the allowable range, and can compensate the axial displacement, the deflection and the eccentricity in a certain range of the pipeline.

Minimum Order: 1 bags

Composite Exhaust Valve China Air Release Valve supplier Features and advantages The exhaust process is smooth, can prevent the occurrence of pressure fluctuations or other destructive phenomena. Air can be discharged in the pipeline when the water is filled with water, and can be evacuated or negative pressure in the pipeline, such as the water column separation conditions will be automatically opened, into the pipeline to eliminate negative pressure. High speed exhaust gas flow, and even the high speed airflow mixed with water mist will not cause the exhaust port to be closed in advance. The vent is closed only after the air is completely discharged. At any time, as long as the system pressure is lower than atmospheric pressure, such as the occurrence of water column separation phenomenon, the air relief valve will immediately open the system into the air, to prevent the emergence of negative pressure in the system. At the same time, the system emptying time in a timely manner can accelerate the emptying rate.

Minimum Order: 1 bags

F650 Series Cast Steel Check Valve Size Range DN15～DN600 Temperature Range -25～450℃ Body Materials Carbon steel Bonnet material Carbon steel Disc material Carbon steel Stem material Stainless steel - Hard surface material seat, API internals Double Flange Check Valve Features and advantages Rugged construction ensures safety in the appropriate pressure temperature range. dual disc check valve Can provide flange and butt two connections. The bonnet does not require removal of the valve from the line, allowing access to the maintenance hinge and disc. The valve flap is closed by its own weight to prevent the backflow of the fluid to form a sufficiently large flow rate to avoid damaging impact. Through the balance valve and the "wing" structure, the head loss (or head loss) is reduced to the minimum extent. Shorter stroke, combined with the advantages of the balance valve, the valve closed more quickly, to minimize the impact of the phenomenon. Because of the small gap on the pivot pin, a funnel tight seat seal can be achieved throughout the pressure range to ensure the integrity of the valve seat seal between the disc ring and the valve body.

Minimum Order: 1 bags

F450 Series Steel Gate Valve Series Fluid medium Water, oil, gas, etc. Temperature Range -29℃～450℃ Pressure Ratings PN1.0～2.5MPa Size Range DN50～DN800 Connection standard GB·ANSI·DIN·API·ISO·BS Valve Life 50 years Body Materials Carbon steel Bonnet material Carbon steel Stem material Stainless steel - Hard surface material seat, API internals Note All Parts Can Be Made Of Different Materials According To Actual Working Conditions. China Gate Valve manufacturer Features and advantages China Gate Valve factory Casting body, with sufficient strength to meet the requirements of the working environment, fluid flow will not be hindered. Elastic wedge, can automatically adapt to the pipe stress caused by the deformation of the valve body. The welded seat ring is sealed to prevent leakage. Stem: T - disc - stem connection to prevent stress applied to the side of the stem to ensure smooth operation. Packing: packing containing preservatives, avoid rust stem. Deep stuffing box ensures long service life of packing. Seat ring: the valve seat is sealed and welded, which can eliminate the leakage channel and prolong the service life.

Minimum Order: 1 bags

609A to clip butterfly valve Fluid Medium Water, Oil, Gas And Various Corrosive Media Temperature Range -10℃～120℃ Pressure Ratings Pn1.0～1.6mpa Size Range Dn50～dn1200 Connection Type Double Folder Connection Standard Gb·ansi·din·api·iso·bs Valve Life 50 Years Body Materials cast iron butterfly valve；ductile Iron；carbon Steel； stainless Stee；aluminum Bronze Valve Seat Material Rubber Valve Plate Material Stainless Steel；aluminum Bronze；ductile Iron Note All Parts Can Be Made Of Different Materials According To Actual Working china butterfly valve Features and advantages: Reduce the rotational torque, support the stem, and make it separate from the valve body effectively, reduce the wear of the valve stem. After polishing treatment, and the valve seat with precision. To achieve zero leakage requirements of air tightness test, the opening and closing torque is small, prolong the service life of the valve seat. Stem seal is not easy to deform, thereby avoiding the usual stem leakage. High precision, high strength, suitable for the installation of handle and other control devices. Firmly connected with the valve stem and valve plate, with anti vibration characteristics, and easy to replace. Good integrity, easy to control the opening and closing of the valve plate. It has the characteristics of no shedding, tension, leakage prevention and convenient replacement. As a device for regulating or cutting off a medium in a pipeline. Apply to handle control device (DN50~300), worm gear, electric and pneumatic control device.

Minimum Order: 1 bags

TIMKEN LM48548/LM48510 Inch Taper Roller Bearing Weight 0.259 Kgs LM48548/LM48511A In Stock LM48548/10 TIMKEN Tapered roller bearings utilize conical rollers and raceways, arranged so that the rollers and raceways meet at a common apex. The rollers are guided by contact between the large end of the roller and a rib on the inner ring. This provides high capacity for radial and single thrust loads. Koyo pioneering efforts in developing crowned rollers have resulted in greater load-carrying capability and longer bearing life. Crowned rollers under load distribute stress equally along their full length of contact with the raceways, thereby eliminating stress concentration at the roller ends. This design concept also compensates for minor misalignment between shaft and housing bore and deflection under load, thereby reducing stress concentration.

Popcorn mold for footwear. The mold material is the aluminium. The maintain basic Popcorn mold life is 20K pairs per set mold (average by one year continually production). We can design and make them according to your needs. We pay attention to detail and quality. We have automated six-axis CNC production and processing, and the mold density is very good.

Minimum Order: 1 bags