Measuring & Analyzing Instruments

“Tempo” make Laboratory Autoclave are suitable for Pharma & Biotech industries, Food research & Quality assurance labs, Agriculture research, Health care & Diagnostic labs, University, etc Technical Data : Temp. Range : 121oC to 125oC Pressure Range : 15 to 22 PSI Factory Set : 15 PSI at 121oC Supply : 230 Volt, AC, Single Phase, 50Hz

Minimum Order: 1 bags

“TEMPO” make laboratory autoclave are suitable for pharma & biotech industries, food research & quality assurance labs, agriculture research, healthcare & diagnostic labs, university, etc. Temperature range – 121°C to 125°C Pressure range – 15 to 22 PSI Factory set – 15 PSI at 121°C Supply – 230V, AC Construction Vertical double walled design has a single chamber for steam & water. Lid, flange & bottom plate is also made of SS, all joints are argon welded. Jointless silicon gasket. Heavy duty industrial flange heater. Lid fitting pressure gauge 0-30 PSI, safety spring loaded pressure valve, steam release valve. Safety high pressure release valve. Foot lifting arrangement is provided in 121C/D/E/F, a basket made of thick stainless steel (S.S.) rod wire mesh. Technical Specification Semi automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer. Low water level cuts off the system with magnetic oat switch for heater’s safety. Fully automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer. Low water level cuts off the system with magnetic oat switch for heater’s safety. Optional Features CFR 21 part 11 compliance software for data logger Data logger Data scanner complete with sensor Safety digital temperature controller Timer

Minimum Order: 1 bags

“TEMPO” make MBRT water bath are made of double wall construction. Temperature range – 5°C above ambient to 98°C Features Lower water level cut off system Flat lid Pyramidal lid Test tube rack to hold 30 test tubes Stirring mechanism Construction “TEMPO” made MBRT water bath are made up of the double wall. The interior is made from SS 304 an exterior from MS duly powder coated. The temperature is controlled by means of PID controller cum indicator.

Minimum Order: 1 bags

“TEMPO” low temperature baths are designed for research work at the desired temperature with high accuracy. The temperature is controlled by microprocessor based PID controller with an accuracy of ±1°C. The unit is provided with a circulation pump to ensure uniform temperature. Low temperature bath offers a combination of contemporary design, advance microcontroller and a range of accessories to suit your specific laboratory or process application. High strength cabinet construction with stainless steel interior tanks withstand the most critical applications in demanding laboratory environments. The unit is mounted on castor wheels for ease of mobility. Temperature range – 0°C to -20°C Temperature accuracy – ±1°C Supply – 230V, AC

Minimum Order: 1 bags

“TEMPO” make constant temperature water bath are ideal for application in refractometry, polarimetry, rotational viscometry, in biotechnology laboratories for the development of culture applications & general laboratory work. Besides it, these constant temperature water baths are useful in the chemical industry, biology, pharmacy, environmental protection, hygiene & disease control, academies and other science research and producing areas. Temperature range – 5°C above ambient to 90°C Temperature accuracy – ±0.5°C Supply – 230V, AC Construction Constant temperature water bath is double walled in construction. The units are insulated with high grade glass wool/PUF. Technical Specification Controlling System Two separate imported microprocessors based autotune PID controller with CE mark & dual display of set value & process value for precise control of temperature. Heating System SS tubular heaters (water immersion type) is used at the bottom for better heat distribution. Water Circulation The water circulation pump is provided for better uniformity of temperature instead of the stirrer. The side mounted circulating pump provides the minimum capacity of 15 ltr per min. Features Inner SS argon welded one piece pot which avoids leakages. 2” thick insulation ensures stable temperature & reduce energy consumption. The circulation pump is provided for better uniformity of temperature instead of the stirrer. The side mounted circulating pump provides 15 ltr/min of capacity. The lid mounted on top is removable. The circulation pump is used for the drain (do not dry run the circulations pump).

Minimum Order: 1 bags

“TEMPO” make cryo baths are designed for research work with the desired temperature with high accuracy. The temperature is controlled by means of microprocessor based PLD controller with an accuracy of 1°C. The unit is provided with a circulating pump to ensure uniform temperature. “TEMPO” cryo bath offers a combination of contemporary cabinet design, advanced microcontroller and a range of accessories to suit your specific laboratory or process application. The baths are provided with high strength cabinet construction with stainless steel interior tanks withstand the most critical applications in demanding environments. The unit is mounted on castor wheels for ease of mobility. Temperature range – 5°C to 90°C Temperature accuracy – ±1°C Supply – 230V, AC Construction Double walled construction with inner SS argon welded one-piece pot to avoid leakages. 2″ thick insulation ensures stable temperature with reducing energy consumption. CFC free hermetically sealed Emerson Copland make compressor for better cooling with R134 A (eco friendly) refrigerant with time delay to safeguard the compressor. Features Safety alarm with temperature overshoot and undershoot. Compressor ON delay timer (2 min) to safeguard the compressor. Optional Features Data logger CFR 21 part 11 compliance software for data logger Safety digital temperature controller Timer

Minimum Order: 1 bags

“TEMPO” make reciprocating shaker water baths are designed and manufactured to comply requirements of industries. Shaker water baths are used for sample thawing, bacteriological examinations, warming reagents, coliform determinations, microbiological assays, hybridization applications, cell culture and aeration, increasing solubility rates, molecular assays and bacterial cultures. Temperature range – 20°C above ambient to 95°C Temperature accuracy – ±0.5°C Shaking speed – 40 to 120 RPM Speed indicator – digital Construction These water baths are double wall constructed with suitable thick PUF insulation and horizontal shaking.

Minimum Order: 1 bags

“TEMPO” serological water bath have SS interior and powder coated mild steel exterior. The temperature is controlled by means of a precision thermostat. Temperature range – 5°C above ambient to 60°C

Minimum Order: 1 bags

Tempo Water Bath have S.S. 316 Interior and S.S. 304 exterior. Temperature Range is from 5°C above ambient to 99°C max. Temperature is controlled by PID controller. Equipment is supplied with Pyramidal Lid. Temperature range – 5°C above ambient to 99°C Supply – 230V, AC Features Safety temperature controller Low water level indicator Timer with alarm European plug Stainless Steel water drainage IP20 protection for control panel Drain for water supply Inlet nozzle for water filling

Minimum Order: 1 bags

“TEMPO” make muffle furnace are designed and manufactured to comply with the requirements of laboratory and industrial applications. It is used for engineering tests of soils and aggregates, cement testing, ashing organic and inorganic samples, gravimetric analysis, ignition tests, etc. “TEMPO” make a muffle furnace in a horizontal/rectangular model. Insulation is provided with high-grade insulation material. Temperature range – 930°C max Supply – Single phase Construction Reach 930°C for high temperature applications in a short time. This laboratory furnace is designed to operate under high temperature with minimal maintenance and higher efficiency. The high temperature ceramic fibre insulation with an advanced graded design ensures fast heat-up time and resistance to the thermal shock. The natural cooling of the outer surface reduces exterior shell temperatures and improve energy efficiency and operator safety. The thermocouples compensated lead wire and polarized plug for measures accurate high-temperature with a longer self-life. Removable panels for easy access to replaceable heating elements and thermocouples. The heating is achieved by silicon carbide element with easy mounting and assembly. Technical Specification Sensor The R type sensor is used for sensing the temperature. Heating System High quality elements are used for better and uniform heating. Features Double shell air circulating chamber for ambient skin temperature is design with lightweight insulation boards. Optional Features Data logger CFR 21 part 11 compliance software for data logger Safety digital temperature controller Timer

Minimum Order: 1 bags

“TEMPO” make shell laboratory furnace are designed and manufactured to comply with requirements for laboratory and industrial applications. It is used for engineering tests of soils and aggregates, cement testing, ashing organic and inorganic samples, gravimetric analysis, ignition tests, etc. “TEMPO” make laboratory furnaces are constructed in the horizontal or rectangular model. The insulation is provided with high grade insulation material. Max temperature – 1150°C continuous (max 1200°c) Construction Heating is effected by means of the element made of the best quality Nichromewire wounded on the muffle. Insulation: Heating element wounded with high-grade cerewool blanket and gaps are filled with suitable insulating material. The single door made of brickwork and cementing fitted in with a single hole at the centre. The shell is provided with an air gap for low body temperature. Technical Specification Temperature Control The temperature is controlled by means of imported microprocessor based autotuned PID controller to avoid overshoot. CE marked and a dual display for set value and process value. Optional Features Data logger CFR 21 part 11 compliance software for data logger Safety digital temperature controller Timer

Minimum Order: 1 bags

“TEMPO” make muffle furnace are designed and manufactured to comply with the requirements of laboratory and industrial applications. It is used for engineering tests of soils and aggregates, cement testing, ashing organic and inorganic samples, gravimetric analysis, ignition tests, etc. “TEMPO” make a muffle furnace in a horizontal/rectangular model. Insulation is provided with high-grade insulation material. Temperature range – 1200°C continuous Supply – Single phase Optional Features Data logger CFR 21 part 11 compliance software for data logger Safety digital temperature controller Timer

Minimum Order: 1 bags

“TEMPO” laboratory furnaces are designed for higher temperature applications. The design is based on the highest standards for quality with efficient high-temperature use and minimal maintenance. Silicon carbide element with easy assembly. These lab furnaces are Ideal for rapid cycling over extended periods. The advance design feature provides fast heat up and recovery with excellent uniformity and energy efficiency, increased resistance to thermal shock, ideal for rapid cycling over extended periods. Temperature range – 1300°C max (1250°C continuous) Supply – Single phase/three phase Construction This laboratory muffle furnace is designed to operate under high temperature with minimal maintenance and higher efficiency. The high- temperature ceramic fibre insulation with an advanced graded design ensures fast heat-up time and resistance to the thermal shock. The natural cooling of the outer surface reduces exterior shell temperatures and improve energy efficiency and operator safety. The thermocouples compensated lead wire and polarized plug for measures accurate high-temperature with a longer self-life. Removable panels for easy access to replaceable heating elements and thermocouples. The heating is achieved by silicon carbide element with easy mounting and assembly. Technical Specification Temperature Control The temperature is controlled by means of an imported microprocessor-based autotuned PID controller to avoid overshoot. CE marked and a dual display for set value and process value. Optional Features CFR 21 part 11 compliance software for data logger Safety digital temperature controller Data logger Timer

Minimum Order: 1 bags

“TEMPO” laboratory furnaces are designed for higher temperature applications. The design is based on the highest standards for quality with efficient high-temperature use and minimal maintenance. Silicon carbide element with easy assembly. These lab furnaces are Ideal for rapid cycling over extended periods. The advance design feature provides fast heat up and recovery with excellent uniformity and energy efficiency, increased resistance to thermal shock, ideal for rapid cycling over extended periods. Temperature range – 1300°C max (1250°C continuous) Supply – Single phase/three phase Construction This laboratory muffle furnace is designed to operate under high temperature with minimal maintenance and higher efficiency. The high- temperature ceramic fibre insulation with an advanced graded design ensures fast heat-up time and resistance to the thermal shock. The natural cooling of the outer surface reduces exterior shell temperatures and improve energy efficiency and operator safety. The thermocouples compensated lead wire and polarized plug for measures accurate high-temperature with a longer self-life. Removable panels for easy access to replaceable heating elements and thermocouples. The heating is achieved by silicon carbide element with easy mounting and assembly. Technical Specification Temperature Control The temperature is controlled by means of an imported microprocessor-based autotuned PID controller to avoid overshoot. CE marked and a dual display for set value and process value. Optional Features CFR 21 part 11 compliance software for data logger Safety digital temperature controller Data logger Timer

Minimum Order: 1 bags