Measuring & Analyzing Instruments

With the development of science and technology, veterinary ultrasound machines have become an important tool for animal medical treatment, and are widely used in the diagnosis and treatment of various animal diseases. Among them, veterinary ultrasound machines have played an important role in the pregnancy scanning of cattle and sheep. 1. The basic principle of veterinary ultrasound machine Veterinary ultrasound machines use the physical properties of ultrasound to work. When the ultrasonic waves meet the tissues in the animal body, different signals will be returned according to the different tissues' ability to reflect the ultrasonic waves. After these signals are received by the receiver, they are converted into visual images, showing the structure and organ status in the animal. 2. Application of Veterinary Ultrasound Machine in Pregnancy Scanning of Cattle and Sheep Early Pregnancy Diagnosis: Veterinary ultrasound machines enable quick and accurate diagnosis of early pregnancy cows and ewes, which helps ensure animal health and productivity. In the early stages of pregnancy, the development of the fetus can be clearly seen through the scan, which is of great significance in preventing unplanned miscarriage or premature birth. Fetal Gender Determination: Veterinary ultrasound machines can also be used to determine the sex of a fetus. This is a very useful tool for farms that need to control the reproductive sex ratio. Monitoring fetal health: Veterinary ultrasound machines can detect abnormalities in the fetus, such as fetal death or malformation. This helps to take timely measures to protect the health of the mother animal. Determination of the expected delivery date: Through the veterinary ultrasound machine, the expected delivery date can be accurately determined, which is very important for the farm, because the delivery can be prepared in advance. 3. Precautions for using veterinary ultrasound machine Operators need to undergo professional training and be familiar with the use of the machine and operating skills. During use, make sure that the animals are in a quiet state so as not to affect the inspection results. Pay attention to protect the safety of animals and operators Boxianglai veterinary B-ultrasound equipment is mainly used for pregnancy and disease detection of pigs, cattle, sheep, camels, alpacas and small animals. The company has high-quality scientific research and management personnel and excellent equipment.

Minimum Order: 1 bags

Veterinary B-ultrasound is a device that uses high-frequency sound waves to generate images inside animals. These images can provide detailed information about the animal's health and reproductive status, such as fetal development, the condition of the ovaries and uterus, and more. By using veterinary B- ultrasound, farmers can more accurately identify breeding problems, take necessary measures to solve the problem, and improve breeding efficiency. In actual farm applications, veterinary B-ultrasound is usually used in the following aspects: Detection of early pregnancy: Through animal B-ultrasound, fetuses can be detected in pigs, cattle and other animals in the early stages of pregnancy, so that pregnancy can be determined earlier and problems such as embryonic death or uterine inflammation can be avoided. Monitor fetal development: Regularly monitor the development of the fetus to ensure its healthy growth. This can help ranchers take action when necessary, such as increasing nutrition or adjusting the feeding environment. Check the ovaries and uterus: Through veterinary B-ultrasound, the condition of the ovaries and uterus can be checked to determine the cause of reproductive problems. This could help ranchers take targeted measures, such as using drugs or surgery, to address the problem. Disease diagnosis: used to diagnose some common animal diseases, such as metritis or mastitis, etc. With prompt diagnosis and treatment, the impact of these problems on animal health and reproduction can be avoided. The application of veterinary B-ultrasound in farms has the following advantages: Improve breeding efficiency: Identify breeding problems more accurately and take necessary steps to fix them. This can improve reproductive efficiency and reduce problems such as embryonic death and uterine inflammation. Reduce economic losses: Through timely diagnosis and treatment, the impact of some common diseases on animal health and reproduction can be avoided, thereby reducing economic losses. Provide accurate reproductive data: Veterinary B-ultrasound can provide accurate reproductive data, including the number and development of fetuses. These data can help ranchers make more accurate breeding plans, improve production efficiency and economic benefits. Boxianglai veterinary ultrasound system - a good helper to help you manage your cattle farm. For more information, please feel free to contact us Phone +86 159-3870-1512 E-mail info@boxianglai.com Website https://www.bxlvet.com/

Minimum Order: 1 bags

1. Suitable for surface mirror and sanding effects of various pipes and shafts; 2. Suggested grinding consumables: nylon wheels, thousand blade wheels, precision grinding wheels, effectively combining the working principle of centerless grinding, reliable and stable quality of the workpiece's outer circle polishing, and automatic feeding; 3. Simple operation, stable performance, capable of water grinding, oil grinding, and dry grinding;

Minimum Order: 1 bags

ARTEMIS Infrared Thermal Scanners TI-CS-T1 / TI-CS-T11. Container load, all new in Hong Kong. Reply for details, photos. $2.1 million in value. Cancelled order.

Application Hot tack is the property of a heat-sealed layer to resist forces that would pull the seal apart while it is still hot. This property is of vital importance for vertical form fill and seal process (VFFS). HTT-02 Hot Tack Tester measures the strength of heat seals formed between thermoplastic surfaces immediately after the seal has been made and before it cools to room temperature. Standards ASTM F1921 Principle A sample strip is sealed by applying pressure from two flat heated jaws under defined conditions of temperatures, contact time, cooling time and pressure. Technical Features HTT-02 Hot Tack Tester is a PLC controlled unit (industrial level stable) and HMI touch screen operated. Every part of the dart assembly and releasing mechanism are made strictly to standard. Both Method A and Method B described in ASTM F1921 P.I.D. temperature control 7 inch HMI touching screen operation PLC control inside Aluminum encapsulated sealing jaws Auto zeroing, overload and over travel protection Test speed 200cm/min, 1200cm/min or others RS 232 port & professional software (optional)

Minimum Order: 1 bags

JS3045 Series Digital Insulation Resistance Tester, also known as megohmmeter, high voltage insulation resistance meter, is used for insulation resistance test. The instrument has large-screen LCD gray and white backlight display, data storage, data access, alarm, automatic discharge, charging, automatic shutdown and other functions. At the same time, it also has the function of measuring the absorption ratio of DC voltage and AC voltage and polarization index. The whole machine is beautiful and high-grade, with a wide range, high resolution, convenient operation, convenient carrying, accurate, reliable, stable performance, large output power, and strong anti- interference ability. JS3045 Series Digital Insulation Resistance Tester has a shock-proof, dust- proof and moisture-proof structure, and is suitable for harsh working environments. And an essential instrument. It is suitable for measuring the insulation resistance value of various insulating materials and transformers, motors, cables and electrical equipment. JS3045 Series Digital Insulation Resistance Tester consists of medium and large-scale integrated circuits. This watch has large output power and many outputs voltage levels (there are 6 voltage levels). The rated insulation test voltage range is 100V ~ 15kV (the output voltage is determined according to the model), and it has a step-by-step voltage adjustment function to output a variety of different voltage levels (such as 15kV models can generate 12KV and other voltage levels, and the use range is wider), insulation The resistance measurement range is 0.01MΩ～50TΩ (determine the measurement range according to the model); the DC voltage measurement range is 0～1000V; the AC voltage measurement range is 0～750V; the DC current measurement range is 0.01nA～6mA; the capacitance measurement range is 10nF～ 50uF.

Minimum Order: 1 bags

JBFD-H Handheld Type Partial Discharge Tester is widely used for partial discharge monitoring of power system, including high voltage switchgear, ring network cabinet, voltage/current transformer, transformer (including dry type transformer), GIS, overhead line, cables, and so on. Partial discharge intensity detection: by measuring the discharge signal in one power frequency cycle, the partial discharge intensity is characterized according to the maximum value (dB) in the discharge pulse sequence. Partial discharge frequency detection: by measuring the discharge signal in one power frequency cycle, the discharge pulse is extracted and the partial discharge frequency is characterized according to the number of discharge pulses. Product Features 1. Configure different sensors to achieve partial discharge detection of almost all high-voltage electrical equipment. 2. Provide time domain waveform, PRPD, PRPS and other discharge patterns to realize the analysis of different discharge types. 3. Humanized man-machine interface facilitates data management of different devices. 4. Built-in ultrasonic sensor and transient ground voltage (hereinafter referred to as TEV) sensor, which can be connected with special sensors such as transformers, GIS, overhead lines, cables, etc. 5. Adopts non-intrusive detection method, no need to power off during the test process, no need to configure additional high voltage source, it is more convenient to use than traditional pulsed partial discharge detector. 6. The test bandwidth range is 30kHz -- 2.0GHz, which is suitable for detection principles of various frequency bands.

Minimum Order: 1 bags

JBFD-H Portable Handheld Type Transformer Switch Partial Discharge Detector can be widely used in partial discharge detection of power system, including high voltage switchgear, ring network cabinet, voltage / current transformer, transformer (including dry type transformer), GIS, overhead line, cable and other equipment insulation state detection, through the following indicators to measure the discharge degree of electrical equipment: Partial discharge intensity detection: by measuring the discharge signal in one power frequency cycle, the partial discharge intensity is characterized according to the maximum value (dB) in the discharge pulse sequence. Partial discharge frequency detection: by measuring the discharge signal in one power frequency cycle, the discharge pulse is extracted and the partial discharge frequency is characterized according to the number of discharge pulses. Product Features ☀ Configure different sensors to achieve partial discharge detection of almost all high-voltage electrical equipment; ☀ Provide time domain waveform, PRPD, PRPS and other discharge patterns to realize the analysis of different discharge types. ☀ Humanized man-machine interface facilitates data management of different devices; ☀ Built-in ultrasonic sensor and transient ground voltage (hereinafter referred to as TEV) sensor, which can be connected with special sensors such as transformers, GIS, overhead lines, cables, etc.; ☀ Adopts non-intrusive detection method, no need to power off during the test process, no need to configure additional high voltage source, it is more convenient to use than traditional pulsed partial discharge detector; ☀ The test bandwidth range is 30kHz ~ 2.0GHz, which is suitable for detection principles of various frequency bands;

Minimum Order: 1 bags

Windows 7 DSP+FPGA 16 bit DAC output GPS synchronous test function USB and PC interface Powerful software High accuracy, compact structure, easy to use Standard four-phase voltage, three-phase current output, voltage is 125V per phase Current is 40A per phase. Three phase parallel up to 120A. 1. Meets all the requirement of field tests. This tester with standard 4 phase voltage, 3 phase current output, voltage 125V/phase, current 30A/phase, 3 phases in parallel can up to 120A. Digital Signal Processor Microcomputer. Not only test the traditional relays and protectors, but also test the modern microcomputer relays, special for transformer differential protection and transfer equipment. 2.All technical indicators fully meet the standard DL/T624-1997: Technical condition of the relay computer test device. 3. Classic Windows 7 operating interface, friendly man-machine interface, easy and fast to operate; High-performance embedded industrial control computer and 8.4-inch resolution of 800 × 600 TFT true color display which provides rich visual information, includes the current working condition and all kinds of help information. 4. The Windows 7 system comes with the restore function; avoid system crashes caused due to illegal shutdown, or malfunction, etc. 5. Equipped with ultra-thin industrial keyboard and optical mouse, complete a variety of operations using keyboard or mouse the same as ordinary PC. 6. The main control board is DSP + FPGA architecture, 16 bit DAC output, generates high - density sine wave 2000 points each circle to fundamental wave, which greatly improve the wave quality and the accuracy of the test instrument. 7. Using high-fidelity linear amplifier. Both to ensure the accuracy of a low current, but also guarantee the stability of the high current. 8. USB directly connect with PC, without any adapter cable, easy to use. 9. Can be connected to a laptop computer (Optional). Laptop computers and industrial machines use the same software, no need to re-learn the methods of operation. 10. With a separate DC auxiliary voltage source, output voltage 110V(1A), 220V(0.6A), provides relays or protective devices which require DC power. 11. The software with self-calibrating function, which avoid to calibrate accuracy by adjusting relays after open the case, greatly improve the stability of the accuracy.

Minimum Order: 1 bags

JS-023A SERIE DE ALTA CALIDAD PROBADOR RESISTENCIA DIELÉCTRICO DE ACEITE DE TRANSFORMADOR está especialmente diseñado para la prueba de rigidez dieléctrica (Voltaje de ruptura) de aceite de transformador. El voltaje de la rotura (fuerza dieléctrica) es uno de los parámetros más importantes del aceite del transformador, él es una regla de la resistencia del voltaje. El valor del voltaje de ruptura (dieléctrico) indica si el aceite contiene agua, impurezas y partículas eléctricas, y conocerá el valor del aceite a través del voltaje de ruptura (rigidez dieléctrica). JS-023A SERIE DE ALTA CALIDAD PROBADOR RESISTENCIA DIELÉCTRICO DE ACEITE DE TRANSFORMADOR proporciona la medida confiable, exacta del voltaje de la interrupción del aceite del transformador, es conveniente para el uso del campo y del laboratorio. 1. AC220V ± 10% de entrada de alimentación (Personalizar según el requisito del cliente) 2. Rango de prueba: 0 - 100KV 3. Tasa de aumento de voltaje: 0.5kv / s ± 10%, 2kv / s ± 5%, 3kv / s ± 5%, 5kv / s ± 5% 4. Tiempos de prueba máximos: 9 5. Tiempos de espera de Init: 0 ~ 999s 6. Tiempo de agitación: 0 ~ 999s 7. Tiempo de espera: 0 ~ 999s 8. Precisión de la medida: ± (1% de la escala completa + 2 dígitos) Resolución: 0.1KV 9. Medición de la temperatura del aceite 10. Rango de medición: 0 °C a 70 °C, o mejor 11. Resolución de temperatura: 1 °C, o mejor 12. Temperatura de funcionamiento: hasta 45 °C 13. Almacenamiento: 100 grupos 14. 7 Pulgadas pantalla táctil lcd colorida 15. Toda la selección puede ser terminada en pantalla táctil 16. RS232 Interfaz

Minimum Order: 1 bags

IIJ-II-80 Series Transformer Oil Breakdown Voltage Tester is specially designed for testing the breakdown voltage of transformer oil and other kinds of insulating oils. IIJ-II-80 Series Transformer Oil Breakdown Voltage Tester adopts industrial single-chip control system, large-scale integrated circuit, new-style I/O interface, coupled with unique detection and anti-interference technology, the performance of the equipment has been greatly improved. Breakdown voltage testing of insulating oils can help to assess the condition of these oils within electrical equipment, such as transformers, capacitors, switches, etc. Based on the test results, the oil can be identified as aged due to an increase in water content, sludge, or if the oil has oxidized. KEY FEATURES: 1. Simple operation, automatically (can be finished just press on key). 2. Menu controlled. Input data is clear. 3. Can store 99 groups of oil testing data, which is convenient to reading and print. The testing data can keep 10 years under the condition of power off. 4. System time can go on running under power off; (The system time is just for reference which cannot be the standard of timing). 5. High capacity of anti-jamming, high precision of testing. 6. Small volume, light weight, which can be operated in the open air very conveniently. TECHNICAL DATA: 1. Power supply: AC220V ± 10%, 50HZ 2. Output voltage: 80KV, 100KV 3. Capacity: 1.6KVA, 2.0KVA 4. Pressure increase speed: about 2 KVA/S 5. Pressure testing speed: 3% 6. Dielectric strength sensitivity: <2KV 7. Wave form distortion: ≤3% 8. Time of dielectric strength: ≤10MS 9. Polar distance: 2.5MM 10. Operation environment: Temperature: 0℃ - 40℃, Humidity: ≤ 85%RH 11. Storage environment : Temperature: -20℃ - 40℃, Humidity: ≤ 75%RH 12. Working altitude: <1500m (if over 1500m can be designed specially) 13. Packing: Wooden Case

Minimum Order: 1 bags

IIJ-II-100 Transformer Oil BDV Dielectric Rigidity Breakdown Voltage Tester is specially designed for testing the breakdown voltage of transformer oil and other kinds of insulating oils. IIJ-II-100 Transformer Oil BDV Dielectric Rigidity Breakdown Voltage Tester adopts industrial single-chip control system, large-scale integrated circuit, new-style I/O interface, coupled with unique detection and anti-interference technology, the performance of the equipment has been greatly improved. Breakdown voltage testing of insulating oils can help to assess the condition of these oils within electrical equipment, such as transformers, capacitors, switches, etc. Based on the test results, the oil can be identified as aged due to an increase in water content, sludge, or if the oil has oxidized. KEY FEATURES: 1. Simple operation, automatically (can be finished just press on key). 2. Menu controlled. Input data is clear. 3. Can store 99 groups of oil testing data, which is convenient to reading and print. The testing data can keep 10 years under the condition of power off. 4. System time can go on running under power off; (The system time is just for reference which cannot be the standard of timing). 5. High capacity of anti-jamming, high precision of testing. 6. Small volume, light weight, which can be operated in the open air very conveniently. TECHNICAL DATA: 1. Power supply: AC220V ± 10%, 50HZ 2. Output voltage: 80KV, 100KV 3. Capacity: 1.6KVA, 2.0KVA 4. Pressure increase speed: about 2 KVA/S 5. Pressure testing speed: 3% 6. Dielectric strength sensitivity: <2KV 7. Wave form distortion: ≤3% 8. Time of dielectric strength: ≤10MS 9. Polar distance: 2.5MM 10. Operation environment: Temperature: 0℃ - 40℃, Humidity: ≤ 85%RH 11. Storage environment : Temperature: -20℃ - 40℃, Humidity: ≤ 75%RH 12. Working altitude: <1500m (if over 1500m can be designed specially) 13. Packing: Wooden Case

Minimum Order: 1 bags

1. Input single power, internal digital combination standard sine waves test source output. 2. Phase angle measurement function: measure the phase angle between high voltage side and low voltage side. Measure the turn ratio and angle of “Non integral point” transformer. 3. It can conduct single-phase measurement and three-phase winding automatic test. Three phase turn ratio value, phase angle value, error, tapping position, tapping value can be measured for once. It also can identify connecting group number automatically. 4. Testing results can be displayed in the form of digit and hexagon vector diagram, which makes transformer connecting group can be made out obviously. 5.With blind test function: There is no need to choose connecting method and group. When measuring Y/△、△/Y transformer, no external short-circuit is needed, connecting method can be shifted automatically according to the chosen testing contents. 6. With tapping test function: TTR and TTR error in the position of each tapping switch can be gauged quickly. Just input rated TTR once, instead of inputting over and over again, TTR error in tapping position can be calculated. 7. With functions of turns ratio measurement and voltage TTR measurement. 8. With 5.6-inch LCD, the effect of data & figure display is visualized and fine. 9. With small size and light weight, it is easy to carry. 10. With built-in high capacity chargeable lithium battery. Test can be conducted without any power supply on site, and once the battery is charged fully, it can make measurement for more than 500 times continuously.

Minimum Order: 1 bags

NF P92-504 Flame Spread Test Machine, Flammability Testing Equipment with 45° Burner Description: Flame spread test machine that is also called as flame propagation test apparatus is designed to determine the reaction to fire of flexible or rigid building materials. The tester is based on the flame persistency test and flame propagation test according to NF P 92-504. As one of the M classification test, flame spread test is suitable for the flexible and rigid materials of any thickness, which do not enter in any of the M1, M2 or M3 main test. Standard: NF P 92-504 speed of spread of flame test used for the materials which are not intended to be glued on a rigid substrate. Feature: 1. Touch screen control panel. 2. Specific burner for NF P 92-504. 3. Automatic control for testing time and flame contact times. 4. Sample holder for flexible materials and rigid materials. Specification: Item Detail Burner 45 , ° Flame contact time Pre-set Burner gas Propane Flame height Adjustable by needle valve Power supply 220V 50-60 Hz Dimensions 650mm×400mm×450mm Net weight 20 kg