Other Material Handling Equipment

As the best alternative to traditional scaffolding, aerial work platform products Hered Scissor Lift has outstanding features such as safety, efficiency, intelligence and environmental protection. Has been widely used in municipalities, electric power, urban transportation, highways, Bridges, railways, shipbuilding, communications, construction, gardens, advertising, machinery In all walks of life, including airports, ports, stations, television broadcasting, etc. ● Self-Lock Entrance Gate ● Full Height Drive ● Roll Out Deck ● Automatic Pothole ● Folding Guardrails ● Safety Brackets ● Proportional Control ● Emergency Stop ● Tilt Sensor ● Automatic Brake System ● Hour meter ● Charger Protection ● All Motion Alarm ● Flashing beacon ● Standard Forklift Porcket ● Emergency Lowering System ● Onboard Diagnostic System ● Horn

Advantages: The most versatile high-altitude operation equipment, stable and safe, and large operating range. Features: Scissor-type aerial work platforms cover 4-14 meters in height, and the power mode can be according to different requirements Selection (such as: three-phase AC power supply, single-phase AC power supply, DC power supply and internal combustion power, etc.); suitable for indoor Flat ground and high-altitude working environment with high environmental requirements. After lifting, there is high stability, wide The Hered working platform and high load-bearing capacity make the working range at height wider and suitable for multiple people working at the same time. Lift The mechanism is made of high-strength manganese steel huge tube. Equipped with a safety protection device to prevent overloading of the lifting platform. With Safety valve to prevent rupture of hydraulic lines. Equipped with emergency lowering device in case of power failure. Main platform attached An extension platform is added, which can be extended to the required position when the platform length is insufficient, thereby improving work efficiency. Applicable scenarios: suitable for mobile high-altitude operations such as installation and maintenance of high-altitude equipment in various industries

The hanger production line is mainly composed of a wire release machine (pay-off machine), clothes hanger making machine, plastic spraying gun, plastic powder recycling booth, dryer machine. The raw material for making clothes hangers is usually 1.8mm to 2.0mm galvanized iron wire, and the maximum diameter of machinable iron wire is 2.5mm. The hanger production line is the main equipment for the industrialized production of hangers. This set of hanger processing equipment mainly includes a hanger forming machine, hanger plastic spraying machine, hanger dryer, etc. The automatic hanger forming machine is the main equipment of the hanger production line, which can process all kinds of galvanized wire and rubberized wire into finished hangers of different specifications. https://hanger-machine.com/hanger-production-l , ine/

Minimum Order: 1 bags

The wire hanger machine is the special equipment for making hangers. This machine can make iron wire, aluminum wire, stainless steel wire, and plastic coated iron wire into hangers. It has the characteristics of high production efficiency and stable operation. The clothes hanger forming machine can make all kinds of galvanized wires and coated iron wires into clothes hangers of the same shape and size. The processing efficiency of this industrial hanger machine is very high, about 2400 hangers can be processed per hour. Moreover, the molding die of the clothes hanger machine can be replaced to make clothes hangers of different specifications.

Minimum Order: 1 bags

Rectangular Tube Roll Forming Machine Production Line Model SP-3050-2040 Motor power 5.5KW Reducer 350 type Feed material Galvanized steel pipe Feeding tube diameter φ38mm & φ50mm Formed Size 20x40; 30x50; 40x40mm Forming Roller 8 forming + 2 straightening Working speed 10 meters / minute Roller material GCr15 heat treatment after finishing Spindle material 40Cr after quenching and tempering Transmission mode 1.2 inch chain sprocket drive Easy operation, and safety production, high effeciency steel tube machine.

Minimum Order: 1 bags

Features:   Large Max Load. Max load can be 100 KGS. Open Style for arm. The arm is open style which can be telescopic freely to reduce the occupation much space. Main application. For the production of the large plastic product, such as automobile parts, dustbin, chair, stool, etc. High Configuration.  All the spare parts are imported, such as our  servo motor is from Japan Panasonic, the guide rail is from Japan Hiwin, the air tube is from France Legris, the  drag chain is from German Igus, the belt is from Italy Elatech, etc. High stability, no shaking. This feature need the professional R&D team, because it not only needs the high configuration for the spare part, but also we need develop the suitable size spare part to let the robot work better. High Precision Reducer. Multi-point position-setting, the accuracy of 0.1mm can meet the requirement of sophisticated products IMD and secondary processing. Belt From Italy. The belt has a good wear resistance and stretching resistance, it can reduce the risk of belt fracture. The action is precise , the accuracy for position-setting can be 0.1mm. Arm Height is decreased by 10%. The arm tow chain is hanging style design, which makes the life for the tow chain and cable more 30% longer life. The reduction for the height of the whole robot can meet the requirement for the plant with limited space. The distance between the main product arm and the runner arm is reduced by 50%. The minumum distance between the main products arm and runner arm is 100 mm, it can be compatible for most of the molds.

Minimum Order: 1 bags

Features:    High Speed. Cycle time of production is less than 5 Seconds. The time occupation of the high speed robot is only 0.5-1 second.   Main application. For the production of the thin-wall plastic product, such as disposible plastic snack box, disposibile plastic fork and knife, etc. Usually the speed of the production is quite fast. ) High Configuration. All the spare parts are imported, such as our servo motor is from Japan Panasonic, the guide rail is from Japan THK, the air tube is from France Legris, the drag chain is from German Igus, the belt is from Italy Elatech, etc.  High stability, no shaking. This feature need the professional R&D team, because it not only needs the high configuration for the spare part, but also we need develop the suitable size spare part to let the robot work better.  High Precision Reducer. Multi-point position-setting, the accuracy of 0.1mm can meet the requirement of sophisticated products IMD and secondary processing.  Belt From Italy. The belt has a good wear resistance and stretching resistance, it can reduce the risk of belt fracture. The action is precise, the accuracy for position-setting can be 0.1mm.  Arm Height is decreased by 10%. The arm tow chain is hanging style design, which makes the life for the tow chain and cable more 30% longer life. The reduction for the height of the whole robot can meet the requirement for the plant with limited space.  The distance between the main product arm and the runner arm is reduced by 50%. The minumum distance between the main products arm and runner arm is 100 mm, it can be compatible for most of the molds.   

Minimum Order: 1 bags

Features: High speed & stable Precise & reliable 1. Multi-station water cooling design, which can reduce the cooling time by up to 80%. 2. Minumum take-out time can be up to 1.2s. 3. The symmetrical layout is more stable when being turned on/off. Easy adjustment, accurate alignment. 4. Using famous brand components to ensure long-term and stable operation. 5. High-rigid and easy to connect with the injection molding machine. 6. Fully-enclosed structure with dehumidification devices to lower water temperature, reduce cooling time and promote efficiency. 7. With built-in conveyor, more safety and anti-fouling. 8. High-speed, stable and reliable control system, applicable to all types of injection molding machine. 9. Suitable for 8-72 cavities or multi-station mold. 0. Double cooling design of air and water which can lower the temperature, release the pressure smoothly and steadily to improve the quality of products. 11. Safety door linkage reset to ensure triple security of electric, mechanism and software. 12. The flip mechanism position is in the center of gravity position, the symmetrical layout of the take-out arm ensures a stable and accurate movement when picking the PET preforms from the injection machine. 13. Using famous brand vacuum generator to ensure long-term and large quantity taking-out requirement for PET preforms. 14. The design of cold & heat zone for the purpose of environmental protection, energy-saving and noise reduction. 15. The double-layer pedestal can be adjusted omnidirectionally which is more convenient, accurate and easier to align for installment. 16. We pay highly attention to the PET performs producing problem, such as collision problem, pollution problem and deformation caused by high temperature. 17. Nowadays, more and more factories start to use robots for taking out PET preform. 18. PET take-out robots focus on stable movement, rigid structure and the light-weight fixture.

Minimum Order: 1 bags