Other Machinery & Parts

H20491 HT Hydraulics Since 1987 Hydraulic Hose Fitting -Two Pieces Fittings 90°METRIC FEMALE 24°CONE L.T ISO 8434-1-DIN3865 Part No. Thread HOSE BORE TUBE O.D DIMENSIONS DN DASH L H S H20491-12-03 M12*1.5 5 03 6 26 30 14 H20491-12-04 M12*1.5 6 04 6 27 30 14 H20491-16-06 M16*1.5 10 06 10 35 33 19 H20491-26-12 M26*1.5 20 12 18 55.5 51.5 32

H20411-TRW HT Hydraulics Since 1987 Hydraulic Hose Fitting -One Piece Fittings Metric Female 24° Cone O-ring L.T.ISO 12151-2-DIN3865 Part No. Thread HOSE BORE TUBE O.D DIMENSIONS DN DASH B W H20411-12-04TRW M12X1.5 6 04 6 22 17 H20411-14-04TRW M14X1.5 6 04 8 23.5 17 H20411-16-04TRW M16X1.5 6 04 10 20.5 19 H20411-16-05TRW M16X1.5 8 05 10 25.5 19 H20411-18-05TRW M18X1.5 8 05 12 23.5 22 H20411-18-06TRW M18X1.5 10 06 12 26.5 22 H20411-22-08TRW M22X1.5 13 08 15 28.5 27 H20411-26-08TRW M26X1.5 13 08 18 30 32 H20411-26-10TRW M26X1.5 16 10 18 32 32 H20411-30-10TRW M30X2 16 10 22 32.5 36 H20411-30-12TRW M30X2 19 12 22 33.5 36 H20411-36-12TRW M36X2 19 12 28 35 41 H20411-36-16TRW M36X2 25 16 28 36 41

H26713-RW HT Hydraulics Since 1987  Hydraulic Hose Fitting -Interlock One Piece Fittings JIC FEMALE 74° CONE SEAL ISO 8434-2-- SAE J514 Part No. Thread HOSE BORE DIMENSIONS 内径DN DASH A B H W H26713-12-12RW 1.1/16*12 20 12 93 45 30 32 H26713-16-16RW 1.5/16*12 25 16 103 52 36 38 H26713-16-20RW 1.5/16*12 32 20 116 52 46 38 H26713-20-20RW 1.5/8*12 32 20 125 61 46 50 H26713-24-24RW 1.7/8*12 40 24 128 66 50 60 H26713-32-32RW 2.1/2*12 50 32 166 78 2-1/2 2-7/8

Last April, we launched a proportional solenoid valve equivalent to HydraForce standard part SP10-20. It is a solenoid-operated, 2-way, normally closed, poppet-type, proportional, screw-in hydraulic cartridge valve, designed for low leakage blocking and load- holding applications. Proportional valves are the ceiling of hydraulic cartridge valve manufacturers. Among more than 100 hydraulic cartridge valve manufacturers in Zhejiang Province, China, there are no more than 5 manufacturers who can produce proportional valves, with a proportion of less than 5%. However, AAK not only has SP10-20, but we have developed more than 10 models of proportional valves. Since E-SP10-20 proportional solenoid valve was posted, we have received the re-peat orders from 3 customers till now. Within 18 months, total 3 foreign customers tested AAK samples and place the re-peat orders, which proves that the E-SP10-20 proportional solenoid valves shipped by AAK has very stable quality and good performance. AAK hydraulic cartridge solenoid valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SP10-20 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 250 bar (3625 psi) Flow: 60 lpm (15 gpm) Internal Leakage: 5 drops/min max. at 250 bar (3625 psi) Operating Fluid Temperature: - 40 to 100 °C (with Standard Buna N seals) Cavity: 10-2 AAK E-SP10-20 Hydraulic Proportional solenoid valve, benchmarking HydraForce SP10-20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (810) 2024-08-19

Minimum Order: 1 bags

All kinds of honing sticks produced by our company are made of the best CBN/diamond materials. Excellent formula, advanced sintering technology, strong grinding force and long service life. It can process soft steel inner holes, quenched and tempered steel, hardened steel, titanium alloy, difficult to grind materials, or cast iron, copper, aluminum, graphite, ceramics, engineering plastics and other materials. For special products, we can also provide customized services according to the products.Our superabrasive honing stones are designed for America SUNNEN; Germany GEHRING, NAGEL; Japan CHISHIMA , TOYO , NISSIN and some other honing machines. We offer a full range of Sunnen style Honing stones, Mandrels, Adapters, and other honing tools. Honing Stones are classified as follows series, K3, K4, K5, K6, K8, K10, K12, K16, K20 L3, L4, L5, L6, L8, L10, L12, L16, L20 P20,P28 Mandrels are including the following series, K3, K4, K5, K6, K8, K10, K12, K16, K20 L6, L8, L10, L12, L16, L20 BL3, BL4, BL5, BL6, BL8, BL10, BL12, BL16, BL20

Minimum Order: 1 bags

Shanghai Zhuyun Machinery Co., Ltd supplies Sunnen alternative GHSS honing heads, including GHSS-1480, GHSS-1950, GHSS2440, GHSS-2800, GHSS-3410 and GHSS- 4410, as well as two-stage Hone Head GHTS-2440, GHTS-2800, GHTS-3410 GHSS-1480 Hone Head:Hone aperture range from 37.59mm - 49.78mm (1.48"~1.96") GHSS-1950 Hone Head:Hone aperture range from 49.53mm - 62.99mm (1.95"~2.48") GHSS-2440 Hone Head:Hone aperture range from 61.97mm - 71.88mm (2.44"~2.83") GHSS-2800 Hone Head:Hone aperture range from 71.12mm - 90.42mm (2.80"~3.56") GHSS-3410 Hone Head: Hone aperture range from 86.61mm to 112.77mm (3.41"~4.44") GHSS-4410 Hone Head: Hone aperture range from 112.01mm - 140.72mm (4.41"~5.54") The GHSS series of honing tools were developed for Sunnen or other brands of vertical honing machines. Honing tools include three to four sets of six or eight spring-loaded stones that use diamond or CBN abrasives. GHSS-2800 Hone Head The diameter of the hole is from 71.12 mm to 77.72 mm, 77.47 mm to 84.07 mm, and 83.82 mm to 90.42 mm. Use 3 sets of stone brackets of different heights for different apertures. We also offer custom honing heads for your specific application. Shanghai Zhuyun Machinery Co., Ltd supplies Sunnen two-stage Hone Head GHTS- 2440, GHTS-2800, GHTS-3410 etc. Used on Honing Machines: Sunnen SV10, SV20, SV15, SV-30 CV-616, CK21 honing machines and other brand Vertical Honing machines.

Minimum Order: 1 bags

There is a saying in the hydraulic cartridge valve industry that those who can do well in hydraulic cartridge valves may not be able to do well in hydraulic manifolds; but those who can do well in hydraulic manifolds, can basically do well in hydraulic cartridge valves. Since the beginning of this year, AAK has received the orders for customized hydraulic manifolds from customers in multiple countries, such as USA, Germany, Russia, Israel etc. AAK has professional engineers with over 20 years of industry experience from HAWE in Germany, who have unique expertise in hydraulic manifold design, especially in oil circuit design. By combining the principles of the system and changing the installation form and working range of the hydraulic cartridge valves, as well as innovating and optimizing the design of the valve block oil circuit, developing new materials, the efficient, energy-saving, and durable customized hydraulic manifolds can be produced. AAK started to customize hydraulic manifolds for internal first-line brands 7 years ago. It may not be possible to find a second hydraulic cartridge valve and manifold manufacturer like us in Ningbo China, who can achieve the following 3 points at the same time: 1. AAK technical team has engineers from the world's top 500 hydraulic manifold enterprises. They have their own experience in material selection, production drawing design, oil circuit design and production quality control. 2. Before hydraulic manifold assembly, the valve block shall be deeply cleaned to ensure 100% impurity free. Each hydraulic cartridge valve shall be tested. 3. Only technicians with more than 10 years of experience are qualified to assemble the hydraulic manifolds. After assembly, use the test bench to debug the hydraulic manifolds for many times to ensure that the act function of the circuit is accurate and reliable. AAK hydraulic manifold is professionally designed to save you worry and effort. You can also have a small try! AAK HYDRAULIC MANIFOLDS (809) 2024-08-12

Minimum Order: 1 bags

Name: Molybdenum Wire Item No: T-W-MW Description: 1. Diameter of the Molybdenum wire: 0.18mm (0.2mm and 0.25mm are optional ones) 2. Purity: 99.9% 3. Colour: Black 4. Package: 2000meter per spool; one spool in one carton Usage: the molybdenum wire is used as the electrode wire on the wire cut EDM machines.

Minimum Order: 200

Name: Diamond Wire Guide for Mitisubishi machine Item No.: M132 Size: Dia0.255mm Accuracy: +/-0.002mm Usage: DD GUIDE 0.25 UP AF2/3 AT (wire guides for Mitisubishi machine)

Minimum Order: 200

Name: Brass EDM Wire Hard type Item No: T-L-BW-H Description: 1. Higher Zinc content ratio brass EDM wire. 2. Higher cutting speed. 3. Superior straightness, suitable for auto threading machines. Item No Diameter (mm) Core Coating Tensile Strength Elongation Color T-L-BW-H 0.15-0.30 CuZn40 - More than 980MPa More than 20% IACS Gloden T-L-BW-S 0.15-0.30 CuZn40 - More than 450MPA More than 22% IACS Gloden Usage: for Japanese wire EDM machines. Name: Brass EDM Wire Soft type Item No: T-L-BW-S Description: 1. High Zinc content ratio brass EDM wire. 2. Suitable for taper cutting . 3. Auto threading in specific condition. Item No Diameter (mm) Core Coating Tensile Strength Elongation Color T-L-BW-H 0.15-0.30 CuZn40 - More than 980MPa More than 20% IACS Gloden T-L-BW-S 0.15-0.30 CuZn40 - More than 450MPA More than 22% IACS Gloden Usage: for Japanese wire EDM machines.

Minimum Order: 100

Jinggong Cast Iron Base plates / Bed Plates, are one of the modern industrial gauges. It is suitable for a variety of inspection, precision measurement of the reference plane. Used for mechanical testing benchmarks of machine tools, dimensional accuracy or shaped inspect parts for deviation, and as close crossed, is an indispensable basic tool in the machinery manufacturing. Cast Iron Base Plates is widely used in machining, tool shop, machine (the seizure) repair workshop, large equipment base, measuring rooms and precision machining of the inspection, measurement and grinding, and can accurately measure, test workpiece flatness, straightness and tolerance of the angle.

Minimum Order: 1 bags

Get superior diaphragm remote control floating valves from a trusted supplier. Our valves are available in DN100 (4 inch) size, with a pressure rating of PN16 (Class 150 LB). Crafted with precision using ASTM A351 CF8M material and equipped with SS 316 trim, these valves ensure reliable performance. Featuring RF flanges, they offer secure connections. Upgrade your control system with our high-quality valves today. Product: Diaphragm Remote Control Float Valve Size: DN100 Pressure: PN16 Body: ASTM A351 CF8M Trim: SS 316 Performance standard: Quality assurance: IS0 9001 Design: CJ/T 167, CJ/T 219 Structure Length: CJ/T 167, GB/T 12221 Test Standard: GB/T 13927 Connection: RF Flange Providing ball, gate, globe, and check valves, China Vervo Valve Co., Ltd serves a global clientele. Visit https://www.vervovalve.com/ for further information.

Minimum Order: 20 square metres

Discover top-notch bypass-type differential pressure balancing valves from a trusted factory. Our valves are designed with precision and are available in DN150 (6-inch) size, PN25 and Class 300 LB pressure ratings. Crafted with SS 304 trim, these valves ensure durability and reliability. Featuring RF flanged ends and hydraulic self-control, they provide efficient and effective fluid regulation. Upgrade your systems with our high-quality valves today. Product: Differential pressure bypass balance valve Size: DN150 Pressure: PN25 Body: ASTM A351 CF8 Trim: SS 304 Performance standard: Quality assurance: IS0 9001 Design: CJ/T 167, CJ/T 219 Structure Length: CJ/T 167, GB/T 12221 Test Standard: GB/T 13927 Connection: RF Flange Specializing in ball, gate, globe, and check valves, China Vervo Valve Co., Ltd serves a global customer base. For more details, go to https://www.vervovalve.com/

Minimum Order: 20 square metres

Discover a reputable flow control valve manufacturer based in China. Our valves are constructed with ASTM A351 CF8 material and designed for optimal performance. With a DN150 size and PN25 pressure rating (equivalent to 6 inch and Class 300 LB), these valves provide reliable flow regulation. They feature RF flanged ends and are equipped with SS 304 trim for enhanced durability. Experience exceptional control sensitivity with our high-quality flow control valves. Order yours today for efficient and precise fluid management. Product: Flow Control Valve Size: DN150 Pressure: PN25 Body: ASTM A351 CF8 Trim: SS 304 Performance standard: Quality assurance: IS0 9001 Design: CJ/T 167, CJ/T 219 Structure Length: CJ/T 167, GB/T 12221 Test Standard: GB/T 13927 Connection: RF Flange Specializing in ball, gate, globe, and check valves, China Vervo Valve Co., Ltd serves a global customer base. For additional information, visit https://www.vervovalve.com/

Minimum Order: 20 square metres