Other Machinery & Parts

Radial contact ball bearings with sealed or shielded caps are designed to accommodate radial loads in a single direction and some axial loads. A bearing series is based on a single cross-section that remains constant as the bore diameter increases, resulting in significant space and weight savings. Bearings are available in both metric and imperial boundary sizes. Depending on the design and series, bearings can be chemically and corrosion-resistant. Withstands bi-directional radial and some axial loads Thin cross-section light Low friction High hardness High running accuracy size Inner diameter 635 mm Outer diameter 685.8 mm Width 25.4 mm Radial cross-section 25.4 mm

Unidirectional thrust ball bearings can accommodate axial loads in a single direction. It cannot withstand any radial load. Its parts are separable, making it easy to install and dismantle as well as for maintenance checks. Most parts are interchangeable. The inner bore of the shaft washer is ground to achieve an interference fit with the shaft. The separable design facilitates installation and dismantling as well as maintenance checks Replaceable parts The inner bore of the shaft washer is ground to achieve an interference fit with the shaft size Inner diameter 120 mm Outer diameter 170 mm Thickness 39 mm performance The basic dynamic load rating is 127 kN The basic static load rating is 390 kN The reference speed is 1 600 r/min

Two paired ultra-precision, high-speed, E-type design with single column angle contact ball bearings and seals The two ultra-precise, high-speed E-designed, sealed paired single-angle contact ball bearings can be used in a variety of configurations. Compared to the same SKFB design high speed bearing, it has slightly higher speed capacity and can withstand higher loads. The operation accuracy is very high Can withstand a very high rotational speed Contact seal The bedded seal extends the service life of bearings Bearings Size d 45 mm bore diameter D 75 mm outer diameter B 32 mm width

SKF 6238M ball bearing - the ultimate choice for demanding heavy-load applications. Precision engineered and made with advanced materials, this top- of-the-line bearing delivers unmatched performance and durability. Built to withstand even the most challenging industrial and commercial settings, investing in the SKF 6238M will make a significant difference in your operations. Features: - Advanced materials for superior durability and performance - Precision-engineered for accuracy and reliability - Can handle heavy loads with ease - Suitable for use in industrial and commercial settings - Long-lasting and dependable performance

VXF53.125-250 VXF53.150-400 VXF53.15-1.6 , VXF53.15-2.5 VXF53.15-4 VXF53.20-6.3 VXF5 , 3.25-10 VXF53.25-6.3 VXF53.32-16 VXF53.40 , -16 VXF53.40-25 VXF53.50-40 VXF53.65-63 VXF53.80-100 VXF63.100-125 VXF63.125-200 VXF63.150-315 VXF63.15-1.6 VXF63.15-2.5 VXF63.15-4 VXF63.20-6.3 VXF63.25-10 VXF6 , 3.25-6.3 VXF63.32-16 VXF63.40-16 VXF63.40 , -25 VXF63.50-31.5 VXF63.65-50 VXF63.80-80 , VXG41.1301 VXG41.1401 VXG41.15 VXG41. , 20 VXG41.25 VXG41.32 VXG41.40 VXG41.50 , VXG44.15-0.25 VXG44.15-0.4 VXG44.15-0.63 , VXG44.15-1 VXG44.15-1.6 VXG44.15-2.5 , VXG44.15-4 VXG44.20-6.3 VXG44.25-10 VXG44 , .32-16 VXG44.40-25 VXI46.15/2 VXI46.20/2< , br>VXI46.25/2 VXI46.25T/2 VXP45.10-0.25 V , XP45.10-0.4 VXP45.10-0.63 VXP45.10-1 VXP4 , 5.10-1.6 VXP45.15-2.5 VXP45.20-4 VXP45.25 , -10 VXP45.25-6.3 VXP45.32-16 VXP45.40-25< , br>VXP47.10-0.25 VXP47.10-0.4 VXP47.10-0.63< , br>VXP47.10-1 VXP47.10-1.6 VXP47.15-2.5 V , XP47.20-4 WFE502-E.. WFK240.D080 WFK240.D , 110 WFK240.E130 WFK30.D080 WFK30.D110 , WFK30.E130 WFK636.D110 WFK636.D11C WFM501 , -E000H0 WFM502-E000H0 WFM503-J000H0 WFM54 , 1-G000H0 WFM542-G000H0 WFM543-L000H0 WFM6 , 81-G000H0 WFM682-G000H0 WFM683-L000H0 WFN , 541-G000H0 WFN542-G000H0 WFN543-L000H0 WF , N681-G000H0 WFN682-G000H0 WFN683-L000H0 W , FW240.D080 WFW240.D110 WFW240.E130 WFW30. , D080 WFW30.D110 WFW30.E130 WFW636.D110 WFW636.D11C WFZ.IRDA-USB WFZ.PS WFZ.USB- , 1 WFZ311 WFZ43 WFZ44 WFZ51 WFZ661 WFZ662C WHE502-D10 WHE542-D100S WMDH000 , 0A WMDH0000B WMDH0000C WMDH0000D WMDH0 , 000F WMDH0000G WMDH0010A WMDH0010B WMD , H0010C WMDH0010D

Minimum Order: 1 bags

Recently, we received the repeat order from a customer in the United States for a hydraulic solenoid cartridge valve equivalent to Hydraforce SV08-20 again. It is a solenoid-operated, 2-way, normally closed, poppet-type, screw in hydraulic cartridge valve, with standard and manual override options. This valve is intended as a blocking or load holding device for low flow circuits having pull-only manual override requirements for handles or cable linkage. This is a standard part and commonly used. Till now, AAK hydraulic solenoid cartridge valve E-SV08-20 has been shipped to several customers in the United States. Its quality and stability has been approved by these customers. Some of them repeat the orders 2 – 3 times a year. The advantages of AAK Hydraulic Solenoid Cartridge Valve E-SV08-20 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SV08-20 Hydraulic Solenoid Cartridge Valve: Pressure Rating: 207 bar (3000 psi) Flow Rating: 23 lpm (6 gpm) Max.Internal Leakage: 0.15 ml/min (3 drops/min) max. at 207 bar (3000 psi) Temperature: - 40 ℃ ~ + 120 ℃ with Buna N seals Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus) Cavity: VC08-2 AAK E-SV08-20 Hydraulic Solenoid Cartridge Valve, benchmarking HydraForce SV08- 20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (818) 2024-10-14

Minimum Order: 1 bags

Recently, we received inquiries from several foreign customers for our Hydraulic Pilot Operated Check Valve E-DC08-40. It is a cartridge style, dual pilot operated check valve for use in blocking or load holding circuits with general purpose hydraulic fluids. Its flow rating, operating pressure, function and performance is completely equivalent to HydraForce DC08-40, and it is also a substitute of Parker CPD084P. Till now, AAK valve E-DC08-40 has been shipped to customers in Sweden, Germany and Mexico. Its quality and stability has been approved by these customers. The advantages of AAK Hydraulic Pilot Operated Check Valve E-DC08-40 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-DC08-40 Hydraulic Pilot Operated Check Valve: Operating Pressure (Inlet): 240 bar (3500 psi) Rated Flow (Inlet): 19 lpm (5 gpm) Pilot Ratio: 3:1 Check Spring Bias: 1.7 bar (25 psi) Leakage: 0.25 ml/min (5 drops/min) max. at 207 bar (3000 psi) Temperature: - 40 ℃ ~ + 120 ℃ with Buna N seals Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus) Cavity: VC08-4 AAK E-DC08-40 Hydraulic Pilot Operated Check Valve, benchmarking HydraForce DC08-40, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (817) 2024-10-07

Minimum Order: 1 bags

4 months ago in May, we shipped a 2 pcs of test order for a pilot operated relief valve equivalent to HydraForce RV10-28 to a new customer in Turkey. It is a screw-in, cartridge style, pilot operated, relief valve with reverse free flow check valve, intended for use as a pressure limiting device in demanding hydraulic circuits which require fast response, low hysteresis, low leakage, low pressure override and reverse free flow features. This customer tried another hydraulic cartridge valve manufacturer in Ningbo China 1 year ago, but failed due to quality, then they placed the 2 pcs of trial order with AAK this May in despite of AAK price is 15% higher. Last Friday, we were advised by customer that AAK samples passed testing and have been performing very well, and received their mass production order for 500 pcs. The advantages of AAK Hydraulic Pilot Operated Relief Valve E-RV10-28 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-RV10-28 Hydraulic Pilot Operated Relief Valve: Max. Operating Pressure: 240 bar (3500 psi) Capacity: 113 lpm (30 gpm) Max. Internal Leakage: 0.50 ml/min (10 drops/min) max. at to 80% of nominal setting Cavity: VC10-2 AAK E-RV10-28 Hydraulic Pilot Operated Relief Valve, benchmarking HydraForce RV10-28, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (816) 2024-09-30

Minimum Order: 1 bags

Grandmfg® Stainless steel Oil level Sight glass, oil sight gauge, oil sight gage, oil level indicator, liquid sight glass, sight window, view ports, male thread sight glasses, domed sight glass plug, oil sight glass plugs, round observation ports, NPT sight glass windows, reservoir oil sight glass, hydraulic tank oil sight glass Material Body:   SS304, SS304L, SS316, SUS316L SUS304, SUS304L, SUS316, SUS316L O-Ring: Viton and NBR Glass Thickness: 2mm to 5 mm Glass Type: Natural Glass, Tempered Glass and borosilicate Glass / vycor glass Resist Temperature Range: -30 Centigrade to 120 Centigrade. Finishing: No Anti-explosion and withstand high temperature and high pressure. Pressure Range:  5-10 Bar or 0.5MPa to 1 MPa. Connections: NPTF, NPT, UNC, UNF, Metric and BSP (G thread) Size:M10X1, M16X1.5,M20X1.5, ,M27X1.5,M33X1.5, G 3/8,G 1/2,G 3/4,G 1    NPT 3/8, NPT 1/2,NPT 3/4,NPT 1 MOQ: 2000 Pcs each size Delivery time: 20 days. The body is Stainless Steel, the glass is tempered glass, the O ring is viton seal gasket, W/ Thread Cap Protection The oil level can be read correctly in the middle by the sight glass. The sight glasses allow for visual inspection of oil and water in tanks, air compressor, gearbox, gear cases, bearing houses and mixers Usage: Pump, Thin-wall container, Radiator, Hydraulic reservoir, receivers, Gearboxes, Speed Reducer, Compressor and Power Transmission.

GrandMfg® steel oil level sight glass Plated Material Body: Carbon Steel Plated Finishing: Zinc plated,Nickel plated and chrome plated O-Ring: Viton,FKM,FPM,NBR, Aramid gasket and Copper seal Glass Thickness: 2mm to 8 mm Reflectors: Stainless Steel 304 Reflector (Any type you can chose with reflector or without Reflector, You also can add float ball.) Glass Type: Natural Glass,Tempered Glass and Borosilicate Glass Resist Tempreature Range:-30'C to 180'C Pressure Range: 5-50 Bar(0.5MPa to 5MPa). Thread type:NPT,NPTF,UNC,UNF,Metric and BSP(G thread) Size： Below you will get the size you wanted.Another size is okay.OEM are welcome. Usage: Pump,Oil Receivers,Gearboxes,Speed Reducer,Compressor and Power Transimission.

Minimum Order: 2000

GrandMfg® Aluminum Oil level sight glass window indicator plugs Material Body: Aluminum 6061 T6/Aluminum 6063 Finish: aluminum natural and aluminum oxidized color/ Anodizing color. Seal: Viton/FKM/FPM,NBR, Aramid gasket,Teflon and Copper seal Glass Thickness: 2mm to 8 mm Reflectors: Stainless Steel 304 Reflector (Any type you can chose with reflector or without Reflector, You also can add float ball.) Glass Type: Natural Glass,Tempered Glass and Borosilicate Glass Resist Tempreature Range:-40'C to 180'C (Different seal have diferent temperature range) Pressure Range: 5-50 Bar(0.5MPa to 5 MPa). Thread type:NPT,NPTF,UNC,UNF,UNEF,Metric and BSP(G thread) Size： Below you will get the size you wanted.Another size is okay.OEM are welcome. Application:Air Pump,Receivers,Reservoir Coolant Tank,HydraulicTanks,Gearboxes,Speed Reducer,Gear unit,Compressor,blower and Power Transimission.

Minimum Order: 200

Specification: Lead: 3MM Lead screw diameter: 14MM Light bar diameter: 12MM Model PT-ST25 PT-ST50 PT-ST100 PT-ST200 PT-ST300 PT-ST400 PT-ST500 P , latform size 65x65mm 65x65mm 80x80mm 80x80mm 8 , 0x80mm 80x80mm 80x80mm Trip 25mm 50mm 100mm 200mm 300 400 500 Lead Screw Pitch 1.25mm 1.25mm 3mm 3m , m 3mm 3mm 3mm Load Bearing 15kg 20kg 20kg 20kg 20kg 20kg 20kg Dead Weight 0.8kg 1kg 1.8kg 2.8 , kg 3kg 4kg 5kg Materia , l Surface Treatment 6061 Aluminum Alloy - Black Or Anodized Product details: PT-ST200 Manual Stretching Stage,X Axis Linear Stretching Slide Stage With Platen PT-ST200 Manual Stretching Stage,X Axis Linear Stretching Slide Stage With Platen PT-ST200 Manual Stretching Stage,X Axis Linear Stretching Slide Stage With Platen PT-ST200 Manual Stretching Stage,X Axis Linear Stretching Slide Stage With Platen PT-ST200 Manual Stretching Stage,X Axis Linear Stretching Slide Stage With Platen PT-ST200 Manual Stretching Stage,X Axis Linear Stretching Slide Stage With Platen PT-ST200 Manual Stretching Stage,X Axis Linear Stretching Slide Stage With Platen Advantage: We have Processing equipment: CNC 10 sets, Lathe 8 sets, milling machine 11 sets. We have a group of experienced high-level processing technicians. Our products are sent to the Metrology Institute for random inspection every year regularly and issue inspection report. Have the industry leading level of the designer, can strictly grasp the product design and processing precision. We have experienced and skilled assembly master. Our products from the design concept, the processing technology, the assembly technology omni-directional control.Provide high quality products for users. If our standard products do not meet your requirements, we can customize them according to your requirements.

Minimum Order: 1 bags

Product details: The product does not include the controller, and the controller is ordered separately Electric Integral Combination Stage: PT-XY100 Product features: ※ stepper motor is equipped as standard, which can be automatically controlled by the company's motion controller. ※ the product is small and light in structure, which is suitable for use under light load and low speed, as well as in scientific experiments. ※ high quality fine grinding lead screw drive, small lead, the same fine fraction can achieve high resolution. ※ the ingenious structural design of air elimination check nut can minimize the clearance of grinding lead screw pair. ※ the precision square guide rail is comfortable to move, and has the function of laterally adjusting the guide rail preload and eliminating clearance. It can be used in multi-dimensional combination. ※ the fine grinding of the bottom plate of the electric moving table and the reasonable fixing mode of the guide rail greatly reduce the pitch and yaw of the electric moving table, and greatly improve the straightness and parallelism of the movement. Product parameters: Model Number PT-XY100 Structure Tra , vel Range(mm) 100mm Platform(mm) , 300mm x 300mm Screw Guide 4 Travel Guide Precise Crossed Roller Bearing Stepper Motor 42(1.8°) Material Alum , inum Alloy Surface Preparation Black-Anodized Load Capacity(Kg) 50 Weight(Kg) 8. , 3 Accuracy Resolution(μm) 20 , (Non MS), 2.5(8 MS) Velocity 40mm/sec Repeata , bility(μm) 2 Absolute Accuracy(μm) 3 Straightness(μm) 5 Moving Parallelism(μm) 15 Pitching , 50" Yawing 25" Back , lash(μm) 2 Lost Motion(μm) 2 Accessory Insta , lling Grating Ruler (Optional) Reloading Servo Motor (Optional) Product dimension drawing: Precision Electric Rotary Stage (Worm Gear): PX110-100 Product parameters: Model Number PX110-100 Structure Ro , tation Range 360° Platform Size φ100mm Transmission Ratio 180∶1 90:1 Drive Mechanism Worm Gear Travel Guide Bearing Stepper Motor (1.8°) 42BYG Material Surface Aluminum Alloy (Black-Anodized) Central Load 45kg Weight 1.7kg Accuracy Design Resolution 0.01°(Non-MS Driver) 0.0005°=1.8″(20MS Drive) Velocity 25°/sec Repe , atability 0.005°=18″ Absolute Accuracy 0.01°=36″ End jump accuracy 15μ Backlash(μm) 0 , .005°=18″ Eccentricity 5μ Lost Motion(μm) 0.005°=18″ Parallelis , m 80μ Product dimension drawing: PX110-100 Advantage , : We have Processing equipment: CNC 10 sets, Lathe 8 sets, milling machine 11 sets. We have a group of experienced high-level processing technicians. Our products are sent to the Metrology Institute for random inspection every year regularly and issue inspection report. Have the industry leading level of the designer, can strictly grasp the product design and processing precision. We have experienced and skilled assembly master. Our products from the design concept, the processing technology, the assembly technology omni-directional control.Provide high quality products for users. If our standard products do not meet your requirements, we can customize them according to your requirements.

Specification: Product parameters: Control mode： manual Turntable weighing： ≥50kg Azimuth axis: 0 ~ 360 rotation, the accuracy is 1, and the scale is marked according to the accuracy of 1. Azimuth axis: -15 ~-15 with an accuracy of 1, and marked with a scale according to the accuracy of 1. Horizontal movement from left to right: ±100mm, with an accuracy of 1mm, and marked with a scale with an accuracy of 1 mm. Lifting shaft: The stroke is 200mm, the accuracy is 1mm, and the scale is marked with the accuracy of 1mm. Workpiece diameter: 300mm Length: 550mm , Weight: 50kg [Caster+foot support provided by the customer] The bottom mounting hole shall be considered in the design. Structure from bottom to top: Lift-Translation-Azimuth-Pitch