Motors

Air Cooled PMAC Motor 0-3000rpm For Industrial Automation Air Cooled PMAC Motor 0-3000rpm for Industrial Automation Product Description Due to the use of a permanent magnet to provide a magnetic field, the rotor process is mature, and reliable, its size flexible, and its design, and power range from dozens of watts to megawatts. At the same time, by increasing or decreasing the number of permanent magnets in the rotor, it is easier to change the number of poles of the motor, so that the speed range of the permanent magnet synchronous motor is comparatively wider. With the use of a multi-pole permanent magnet rotor, the rated speed can be as low as a single digit, which is difficult to achieve by ordinary asynchronous motor. Especially in the application environment of low speed and high power, a permanent magnet synchronous motor can adopt multi-pole direct drive at low speed. Compared with an ordinary motor plus speed reducer, the advantages of a permanent magnet synchronous motor are prominent. High-efficiency NdFeB permanent magnet is adopted, with no excitation loss. Special rotor structure design has greatly reduced iron loss and stray loss. The motor efficiency is above IE4 standard, Compared with the three-phase asynchronous motor, the efficiency is improved by 5-10% and the power factor is increased by 10-15%. High efficiency and high power factor can be maintained in the load range of 20% to 120%. The power factor can be 1, while a three-phase asynchronous motor can only reach 0.86, it effectively reduces the cabling loss and improves the utilization rate of the power grid. Energy saving is more significant under light load.

YL Series dual capacitor electric ac motor with copper winding wire Type Output(KW) A Speed r/min Efficiency Eff% Power fact Rated torque Tst/TN Tst/TN Tmax/TN Noise Weight(KG) YE3-180M-2 22 40.5 2940 92.7 0.89 70.7 2 8.2 2.3 83 187 YE3-200L1-2 30 54.9 2950 93.3 0.89 96.1 2 7.6 2.3 84 242 YE3-225M-2 45 80.8 2970 94 0.9 143.2 2 7.7 2.3 86 335 YE3-250M-2 55 98.5 2970 94.3 0.9 175 2 7.7 2.3 89 415 Product Description IE2 Series high efficiency three phase induction motor IE2=YE2, level 3 energy efficiency. IE3=YE3, level 2 energy efficiency. IE4=YE4, level 1 energy efficiency. These series motors have many virtues, including beautiful profile, high efficiency and energy saving, class F insulated, the protective class is IP55, low noise, little vibration and running smoothly. The efficiency of the YE2 series motor complies with the national level 3 energy efficiency requirements and is consistant with IE2 of IEC 60034-30. Terms of using: 1, Altitude: up to 1000m; 2, Ambient temperature: -15~40°C; 3, Operation duty: S1; 4, Rated Voltage 380V, Rated frequency 50HZ; 5, Encloseure protection: IP55(IEC34-5) 6, Cooling method: IC411(IEC34-6) YL Series Electric Industrial AC Motors IP55 Dual Capacitor With Winding Wire 0 About us Relying on Xiangdian Research Institute, the company specializes in research and development, manufacturing, sales, maintenance of AC, DC motors, auxiliary power station motors, high-efficiency energy-saving motors and high-speed railway wind power auxiliary motors. XDMC the backbone enterprise of China's electrical industry and the comprehensive test base of new products in China's electrical industry. YL Series Electric Industrial AC Motors IP55 Dual Capacitor With Winding Wire 1 Our Services · Customizing the motors according to customers' requirements. · Delivery time for sample order: 1-5 days, for pallets order 7-15 days after receiving clear payment · Warranty: 1 year for repairing or replacement of motors, customs duty & freight not included (have maintenance point ). FAQ Q: How To Order ? A: Step 1, please tell us what model and quantity you need; Step 2, then we will make a PI for you to confirm the order details; Step 3, when we confirmed everything, can arrange the payment; Step 4, finally we deliver the goods within the stipulated time. Q: What is the MOQ? R: 1 set, accept sample. Q: When you ship my order R: Normally container need 15-40days, sample 3-7DAYS Q: How about the quality guarantee period? R: One year. We have maintenance point in the world. Q: Do you have the certificates? R: Yes, we have passed the CE and CCC certification. Q: Do you offer ODM & OEM service. R: Yes, we can custom design for specific application. Q: When can I get the quotation? R:We usually quote within 12 hours after we get your inquiry. If you are urgent to get the price, please send the message on trade manager or call us directly. Q: How can I get a sample to check your quality? R:After price confirmed, you can require for samples to check quality. If you need the samples, we will charge for the sample cost. But the sample cost can be refundable when your quantity of first order is above the MOQ Q: What is your main market? R:Southeast Asia, South America,Middle East.North America,EU After-sales Service 1 year warranty for all kinds of products; If you find any defective accessories first time, we will give you the new parts for free to replace in the next order, as an experienced manufacturer, you can rest assured of the quality and after-sales service.

PRODUCT DESCRIPTION Hollow Shaft Asynchronous Aluminum Motor Hydraulic Power For Plastic Machinery Hollow Shaft Motor Description A hollow shaft asynchronous aluminum housing hydraulic motor is an actuator of a hydraulic system. It converts the fluid pressure energy provided by a hydraulic pump into the mechanical energy of its output shaft. The direct-connected hydraulic motor is tightly integrated with the vane pump, eliminating the need for a pump sleeve coupling. Easy installation, good concentricity, smooth operation, low noise Compact Motor technology is exquisite, compact structure, beautiful appearance, design. safer The oil pump and the motor are equipped with an oil drain groove to prevent the oil from immersing in the motor, ensuring the safety of the motor and easier disassembly. Low noise Hydraulic motors have stricter quality requirements, low noise, low temperature rise, and higher efficiency. efficient Adopt reasonable measures, number of rotor slots, fan parameters, and forward windings to reduce losses and improve efficiency by 2% -8% Smoother operation Couplings, pump brackets, typical floor, and other components are reduced, the quarter length is shortened, the operation is smoother, noise is lower, and oil pump replacement is more convenient. hydraulic electric motor hydraulic motor hydraulic motor Application Direct-connected with vane pump for plastic machinery www.electricmotorwaterpump.com Note , 1. Be sure to correct concentricity during installation, allow 0.1mm deviation 2. Be sure to confirm the matching size of the oil pump and motor before purchasing. Please consult for more details 3. If you don't know what oil pump to match, please measure the "shaft size," "flange inner diameter," and "hole distance" of your motor? We will find the suitable motor for you based on the size

PRODUCT DESCRIPTION Direct Drive Torque Motor Low Cogging And Zero Cogging Top Quality With High Standards Inroncore and slotless torque motors with same size Ultra-thin design Highest torque density Low thermal resistance Encapsulated design with shielded cable Low stator and rotor mass with large inner diameter Wide range of bus voltage from 45V up to 600Vdc Performance Parameter Remarks Symbol Unit TMXSL160-17 TMXSL160-25 TMXSL160-34 TMXSL160-60 TMXSL160-92 Winding Type N Y Z N Y Z N Z N Y Motor type 3 phases synchronous slotless 230Vac rms (320Vdc) 380Vac rms (600Vdc) Peak torque Magnet@25°C Tp Nm 4.1 4.1 4.1 9.7 9.7 9.7 15.9 15 36.4 60.8 Continuous torque Coil@120°C Tc Nm 1.03 1.03 1.03 2.43 2.43 2.43 3.98 3.75 9.1 15.2 Maximum Speed @Tc@48V nmax mrpm 8819 15679 26458 4410 7898 13656 2453 9407 1725 1036 Motor Torque Constant Kt Nm/Arms 0.24 0.14 0.08 0.48 0.27 0.16 0.86 0.23 2.3 3.83 Motor Constant Coils@25°C Km N2/W 0.006 0.006 0.007 0.018 0.018 0.018 0.036 0.031 0.114 0.625 Electrical Parameter Remarks Symbol Unit TMXSL160-17 TMXSL160-25 TMXSL160-34 TMXSL160-60 TMXSL160-92 Peak Current Magnet@25°C lp Arms 17.2 30.5 51.5 20.3 36.3 62.7 18.4 66.7 15.8 15.9 Max.Continuous Current Coil@110°C lc Arms 4.3 7.6 12.9 5.1 9.1 15.7 4.6 16.7 4 4 Back EMF Phase to Phase peak 25℃+/-10% Kep V/krpm 21 12 7 41 23 13 74 19 198 330 Back EMF Phase to Phase RMS C25℃+/-10% Ke V/krpm 15 8 5 29 16 9 53 14 140 233 Resistance Per Phase Coil@25°C Rph Ω 3.15 0.95 0.31 4.37 1.3 0.44 6.87 0.55 15.49 5.86 Induction Per Phase I<0.63lp Lph Mh 3.78 1.24 0.4 6.12 1.95 0.66 10.99 0.88 26.33 16.47 Electrical Time Constant Coil@25°C Te Ms 1.2 1.3 1.3 1.4 1.5 1.5 1.6 1.6 1.7 2.9 Max. Continuous Power Loss All coils Pc W 226.3 215.7 200.4 436.8 416.2 422.7 568.4 595.8 945.4 348.9 Poles Nmag nr 36 36 36 36 36 36 36 36 36 36 Product dimension drawing: RoHs Low Cogging Zero Cogging With High Standards 12V DC Motor High Torque Low Rpm 0 Application area RoHs Low Cogging Zero Cogging With High Standards 12V DC Motor High Torque Low Rpm 1 RoHs Low Cogging Zero Cogging With High Standards 12V DC Motor High Torque Low Rpm 2

Casun Nema 14 0.3A Stepper Motor 6V DC Stepper Motor 36*12.5mm for Video conference machine High Torque Casun 0.3A NEMA 14 Stepper Motor 12.5mm 6V DC Stepper Motor 36*12.5mm 0.3A 2 Phase Bipolar Hybrid 6V DC NEMA 14 Thin Stepper Motor The 35mm Hybrid Stepper Motor Series offers powerful holding torque in a variety of sizes. Use with a microstepping driver to reduce vibration and achieve higher step resolution. Choose a baseline version or request your own customized configuration. Features: Bipolar or unipolar versions available Hybrid stepper construction Available in single or double shaft versions CE and RoHS approved Customizations on request Appearance Casun 0.3A Nema 14 Stepper Motor 6V DC For Video Conference Machine 0 Dimensions Casun 0.3A Nema 14 Stepper Motor 6V DC For Video Conference Machine 1 Motor Specifications Step Angel 1.8 ° Fram Size 12.5 mm Number of Phase 2 Phase Rated Current 0.3A Holding Torque 22 mN.m Resistance 20 ohm Inductance 6.8 mH Rotor Inertia 4 g-cm² Motor weight 0.06 kg Number of leads 4 Connection Bipolar Torque Curves Download If our standard motor cannot meet your needs, we can customize the motor according to your needs Customized content includes but is not limited to special shafts, winding parameters, installation dimensions, lead wires with special requirements, connectors, etc. FAQ 1. who are we? We are based in Guangdong, China, start from 2011,sell to Domestic Market(63.00%),Western Europe(12.00%),North America(9.00%),Eastern Asia(8.00%),Northern Europe(2.00%),Eastern Europe(00.00%),Southeast Asia(00.00%),Oceania(00.00%),Mid East(00.00%),Southern Europe(00.00%),South Asia(00.00%). There are total about 51-100 people in our office. 2. how can we guarantee quality? Always a pre-production sample before mass production; Always final Inspection before shipment; 3.what can you buy from us? Stepper Motor,BLDC Motor 4. why should you buy from us not from other suppliers? We are specialized in producing and selling stepper motors for more than 11 years. 5. what services can we provide? Accepted Delivery Terms: FOB,CFR,CIF,EXW,Express Delivery； Accepted Payment Currency:USD,CNY; Accepted Payment Type: T/T,L/C,D/P D/A,,PayPal; Language Spoken:English,Chinese,Japanese Options: Encoder Brake Gearbox Shaft Casun 0.3A Nema 14 Stepper Motor 6V DC For Video Conference Machine 2 Casun 0.3A Nema 14 Stepper Motor 6V DC For Video Conference Machine 3 Casun 0.3A Nema 14 Stepper Motor 6V DC For Video Conference Machine 4 Casun 0.3A Nema 14 Stepper Motor 6V DC For Video Conference Machine 5

EIS-037T-0013/EIS-055T-0016 Integrated Hydraulic Servo System for Injection Molding Machine 1. Name:Integrated Hydraulic Servo System for Injection Molding Machine 2. Introduce:Integrated Hydraulic Servo System,th pressure and flow controlled double closed-loop,by control the motor speed to control the oil supply of hyrauluc power unit. 3. Model:EIS-037T-0013/EIS-055T-0016 4. Application:Can be used on Injection molding machine,Lathe,CNC,Hydraulic Press,Vulcanizing Machine,Shoe Machine,Bending Machine,Pipe Bender,wood-working machine and so on. 3.7kW 5.5kW Integrated Hydraulic Servo System For Injection Molding Machine EIS-037T-0013 EIS-055T-0016 0 4.Feature: (1)Compare with the tranditional Injection Molding Machine hydraulic power unit the noise and temperature is lower. (2)Power Saving:Compare with the tranditional Injection Molding Machine hydraulic power unit can save 70% power. (3)Easy assemble and operate convenience.Before delivery out the engineer will set all the parameters according to customer's equipment.After get the system customer only need to connect the power cable.If customer want to adjust some parameters only need to re-set on the keyboard(include keyboard type and terminal type) or PLC of system accroding to the manual document. (4)High Efficiency. 5.Parameter of Motor: EIS Model EIS037T-0013 EIS055T-0016 EIS075 , T-0020 EIS090T-0025 EIS110T-0032 , EIS150T-0040 EIS185T-0050 EIS220 , T-0063 Basic Data Carrier Frequency 2kHz~16kHz；Can adjust the Carrier Frequency according to overload Control Way close-loop vector control Speed Ratio 1 :1000 Rotating Speed ±0.02% Overload Capacity 150% rated current 60S,180% rated current 3S Starting Torque 0Hz/180% Power Voltage Frequency 3 Phase,50/60Hz Voltage Range 380V Rated Power 3.7kW 5.5kW 7.5kW 9.0kW 11kW 15kW 18.5kW 22kW Rated Output current 9A 13A 17A 20A 25A 32A 37A 45A Rated Input current 10A 14A 18A 21A 26A 35A 38A 46A Control Terminal Input Terminal LP12-8/7 Air Plug,can customized Output Terminal LP12-8/7 Air Plug,can customized Communication Terminal Integrated LP12-7 Air Plug,include 485 Power Out put 10V/13V/24V Power Output Keyboard LED Display Parameter Key 8 Keys Environment altitude 0~2000m,Over 1000m derating,increase 100m derate 1% Application Place indoor,avoid direct sunlight,non-corrosive,flammable gas,Wihout oil mist,water vapor and so on Environment Temperature -10℃~40℃,40~50℃ derating,increase 1℃ derate 1.5% Vibration Lower 0.6g Store Temp -20℃~60℃ Humidity Under 90%RH (non condensing) Cooling Way forced cooling 6.Parameter of Servo Pump(Internal gear pump): Serial No. Size mL/r Working Pressure(Mpa) Speed Range(r/min) Weight(KG) Rated Max Max Min HG0 8 8.2 31.5 35 3000 600 4.6 10 10.2 31.5 35 3000 600 4.8 13 13.3 31.5 35 3000 600 4.9 16 16.0 31.5 35 3000 600 5.2 20 20.0 25 30 3000 600 5 . 6 25 24.0 25 30 3000 600 6 HGl 25 25.3 31.5 35 3000 200 14.5 32 32.7 31.5 35 3000 200 15 40 40.1 31.5 35 3000 200 16 50 50.7 31.5 35 3000 200 17 63 63.7 25 30 3000 200 18.5 HG2 63 64.7 31.5 35 3000 200 42 80 81.4 31.5 35 3000 200 43.5 100 100.2 31.5 35 3000 200 45.5 125 125.3 31-5 35 3000 200 48 145 145.2 25 28 3000 200 50 160 162.8 21 26 3000 200 52 3.7kW 5.5kW Integrated Hydraulic Servo System For Injection Molding Machine EIS-037T-0013 EIS-055T-0016 1 3.7kW 5.5kW Integrated Hydraulic Servo System For Injection Molding Machine EIS-037T-0013 EIS-055T-0016 2 3.7kW 5.5kW Integrated Hydraulic Servo System For Injection Molding Machine EIS-037T-0013 EIS-055T-0016 3 7.Case for Power Saving(All-Electric Injection Molding Machine--Neutron Hydraulic Power Unit): Name 200 Tons All-Electric Injection Molding Machine Hydraulic Power Unit Model HIS-037 Pressure 14MPa Oil Tank 20L 3.7kW 5.5kW Integrated Hydraulic Servo System For Injection Molding Machine EIS-037T-0013 EIS-055T-0016 43.7kW 5.5kW Integrated Hydraulic Servo System For Injection Molding Machine EIS-037T-0013 EIS-055T-0016 5 Tranditional Hydraulic Power Unit Hydraulic Servo System Test Time(Hour) 24 24 One Day Power Consumption(kW.h) 40 2.4 One Hour Power Consumption(kW.h) 1.67 0.1 One Year Power Consumption(kW.h) 14629 876 One Day Electric Charge(RMB) 14629 876 Energy Saving 94 Oil Temperature(℃) 55 30 The tranditional single pump system injection molding machine,single pump system can only control one action of the pressure and flow,die sinking and push out can not Synchronize,so the production efficiency is very low. Only need to add a compact structure &cost-effective Hydraulic Servo System: (1)Improving production efficiency 3S. (2)Low thimble pressure . (3)Not need to change the oil-way and Electrical Cabinet,save time to produce.

EC 380V/220V High power variable speed 500W-2200W BLDC motor for farm duty fan Introduction This page shows a high power EC/BLDC fan motor used in fan blower or air conditioner units and similar applications, which need to drive fan blowers. Till now, Hengsheng has a various of specifications of AC BLDC motors, and different induction motor, geared motor, PM motor with gearbox. Because of its long working life, stable performance and low failure rate, our products are well received by customers. We have got the certification of CCC, RoHS and ISO9001:2008. Features of BLDC motor 1. Rated Voltage:200-240V 50Hz/60Hz 2. Output power range: 750W-2.2KW 3. Speed 300-1000 adjustable 4. The driver adopts the structure of aluminum shell completely closed, which has high protection level and is safe and reliable. 5. The driver adopts independent installation structure, which is convenient for disassembly and maintenance after sale. 6. The driver is integrated with three-speed, VSP10V,AC24V,PWM/PWF, RS485 control mode, and the function of speed feedback is optional. 7.Using infrared remote control, adjustable constant speed,constant torque, fan coil unit load, cassette fan coil unit load.clockwise or counterclockwise rotation 8.Using the same structure and installation method as the single-phase electric power, it is more convenient to replace and popularize 9.Rated speed 1070 RPM, rated output power 750W, Max Torque 6.5 Nm. Specification 140&160mm motor specification PN A B C D E F G H K Specification Rotation 12411001 6 φ25.4 M12*P1.75 35 35 49 84.7 102 325 160-220V-1.2KW-450rpm CCW 12511001 6 φ25.4 M12*P1.75 35 35 49 84.7 102 325 160-380V-1.2KW-600rpm CCW 16911006 6 φ24 M12*P1.75 35 35 49 84.7 102 325 160-380V-1.5KW-940rpm CCW 13411003 8 φ24 M12*P1.75 35 35 49 84.7 102 325 160-220V-1.5KW-940rpm CCW 16311001 6 φ25.4 M12*P1.75 35 35 49 84.7 102 325 160-380V-1.8KW-950rpm CCW 14711001 6 φ25.4 M12*P1.75 35 35 49 84.7 102 325 160-380V-2KW-1400rpm CCW 16411001 8 φ24 M16*P1.5 26 40 70 93 110 333 160-380V-2.2KW-950rpm CCW 12411003 8 φ24 M20*P1.5 30 45 78 95 112 335 160-220V-1.1KW-600rpm CW 12411005 8 φ24 M20*P1.6 30 45 78 95 112 335 160-110V-1.1KW-600rpm CW 12811003 6 φ25.4 M12*P1.75 35 35 49 51 72 289 140-220V-0.375KW-730rpn CCW 13011001 6 φ25.4 M12*P1.75 35 35 49 51 72 289 140-380V-0.375KW-500rpn CCW 12811001 6 φ25.4 M12*P1.75 35 35 49 51 72 289 140-220V-0.55KW-560rpm CCW 12911001 6 φ25.4 M12*P1.75 35 35 49 51 72 289 140-380V-0.55KW-890rpm CCW 12911003 8 φ24 M12*P1.75 35 35 49 51 72 289 140-380V-0.55KW-940pm CCW 12811006 8 φ24 M12*P1.75 35 35 49 51 72 289 140-220V-0.75KW-940rpm CCW 16911003 14 φ15 M10*P1.5 21 30 53 71 88 304 140-380V-1.1KW-940pm CCW 16311001 14 φ15 M10*P1.5 21 30 53 71 88 304 140-380V-0.75KW-940pm CW 500-2200W AC BLDC Motor Brushless EC 380V/220V High Power Variable Speed For Farm Duty Fan 0 More information of Brushless DC Motor A brushless direct current motor (BLDC: Brushless Direct Current Motor), also known as an electronic commutation motor (ECM or EC motor) or synchronous DC motor, is a synchronous motor that uses direct current (DC) power supply. The brushless DC motor is essentially a permanent magnet synchronous motor that adopts DC power input and becomes a three-phase AC power supply with an inverter. There are various types of motors, and brushless DC motors are the most ideal speed control motors today. It integrates the advantages of DC motor and AC motor, not only has the good adjustment performance of DC motor, but also has the advantages of simple structure of AC motor, no commutation spark, reliable operation and easy maintenance. Therefore, it is well received by the market and is widely used in automobiles, home appliances, industrial equipment and other fields.

Product Highlights 1.Standard Operating Conditions 1-1 Rated Voltage:5V. 1-2 Direction of Rotation: CW when viewed from output shaft side 1-3Operating Temperature and Humidity:Temperature range of -10C~+50C,Humidity range of 30%~80%. 1-4Storage Temperature:Temperature range of -30C~+60C 2. Measuring Conditions: 2-1Motor Position:To be place t horizontally when measuring 2-2Power Supply: Regulated DC power supply --Fingerprint lock<optical instrument<office facilities etc; --Electric motor,low noise,low current and no spark. --Step angle:18degree/50/step Size :20MM Drive method :Unipolar Step angle:18 degree

Quick Details CNC Machining or Not: CNC Machining Type: Broaching, DRILLING, Etching / Chemical Machining, Laser Machining, Milling, Other Machining Services, Turning, Wire EDM, Rapid Prototyping Material Capabilities: Aluminum, Brass, Bronze, Copper, Hardened Metals, Precious Metals, Stainless Steel, Steel Alloys Micro Machining or Not: Micro Machining Place of Origin: China Surface treatment: Customer's Request Service: Customized OEM CNC Machining Application: Industrial Equipment, Automation, Aerospace, Medical Equipment: 3/4/5 Axis Center Machining Drawing Format: 2D/ (PDF/CAD) 3D (IGES/STEP) Size: Customer's Drawings Tolerance: 0.01- +/-0.005mm Lead time: 14-21days Supply Ability: 800000 Piece/Pieces per Month

Minimum Order: 1 bags

10mm Micro stepper Motor 5VDC 10BY25 PM mini Stepping Motor VSM1070 is a precision miniature stepping motor with an outer diameter of 10mm, a motor height of 9.2mm, and an output shaft diameter of 1.5mm. The length of the output shaft can be appropriately changed according to customer installation requirements, and can also be equipped with gears, pulleys, worms, lead screws, etc. output device. Because of its small size, high precision, easy to control and other excellent characteristics, so this micro stepper motor is widely used in the camera, optical instruments, lenses, precision medical devices, automatic door locks and other fields. The motor input part of the FPC, but can according to the customer demand can be changed to a connecting line needle, PCB and other forms. The mounting bracket can be changed according to the customer's request. 10mm micro stepper motor parameter sheet: PRODUCT NAME 10 MM MICRO STEPPER MOTOR MODEL VSM1070 MAX. STARTING FREQUENCY 1250 PPS min. (AT 5.0 V DC) MAX. SLEWING FREQUENCY 1950 PPS min. (AT 5.0 V DC) PULL IN TORQUE 5.4 gf-cm min. (AT 500 PPS , 5.0V DC) PULL OUT TORQUE 6 gf-cm min. (AT 500 PPS , 5.0V DC) INSULATION CLASS CLASS E FOR COILS INSULATION STRENGTH 100V AC FOR ONE SECOND INSULATION RESISTENCE 1 MΩ (DC 100 V) OPERATING TEMPERATURE RANGE -10~+60 ℃ OEM & ODM SERVICE AVAILABLE

PRODUCT DESCRIPTION BLDC Fan Motor Three Phase DC Motor 24VDC Table Fan Circulator Fan Use Brushless DC motor can be mainly divided into two parts, motor and circuit control. Motor is composed of rotor which its main component is permanent magnet and of stator which its main component is silicon steel sheet and copper wire. Operating condition Rated voltage 24VDC Operating voltage 21.6~26.4VDC Operating condition 0℃~40℃, RH 5%~95% Storage condition -20℃~60℃, RH 5%~95% Motor characteristics Rated voltage 24VDC Operating voltage 21.6~26.4VDC Rated load 75mN.m Rated speed(on load) 1800+/- 10% RPM Rated current(on load) 0.20A max Rotation direction CW(view from shaft side) Working duty continuous Position detection method FOC Insulation resistance 10MΩmin. (500VDC) Dielectric strength 600VAC/1S leakage current <=5mA Temperature rise <65K Speed control PWM PWM frequency: 15KHZ ~ 20KHZ Duty cycle: 1%~99% L level: 0~1.0V; H level: 2~5.5V; Detecting method of motor speed FG signal L level: 0~0.5V; H level: 4.5~5.5V; Max input/output current :5mA Drawing: Three Phase Table BLDC Fan Motor Brushless 24V For Circulator 0 Three Phase Table BLDC Fan Motor Brushless 24V For Circulator 1

Window ac unit air conditioner blower fan motor, universal air conditioner fan motor Technical parameters: Model series YDK/YSK140 Voltage 110-120V / 220-240V 1PH Frequency 50Hz / 60Hz / 50/60Hz Power 1/8-1HP 100W-750W Speed 600-1800RPM 4/6P Speeds single/multi speeds Rotation CW/CCW/Reversible Insulation B/F Proof IP20-IP54 Protection thermally protected Enclosure totally enclosed/open ventilated Model Voltage Frequency Power , Power Speed YSK140/30-4-150-1 230V 50H , z 150W 1/5HP 1200RPM/3 SPD YSK140/35-4-185-1 230V 50Hz 185W 1/4HP 1300RPM/3 SPD YSK140-245-4 208-230V 60Hz 245W 1/3HP 1625RPM/3 SPD YSK140-375-4 208-230V 60Hz 375W 1/2HP 1625RPM/3 SPD YSK140-550-6 208-230V 60Hz 550W 3/4HP 1075RPM Listed are representative motors, technical parameter and mounting dimension can be customized according to customer's requirement. Product Features: Use NSK low noise high quality ball bearing; Nickel plating for shaft, electrophoretic coating for enclosure; Reasonable structure, high efficiency, low temperature rise, low noise, small vibration. 220V 1/5HP YDK/YSK139 Double Shaft Window Air Conditioner Unit Blower Fan Motor 0 220V 1/5HP YDK/YSK139 Double Shaft Window Air Conditioner Unit Blower Fan Motor 1 220V 1/5HP YDK/YSK139 Double Shaft Window Air Conditioner Unit Blower Fan Motor 2220V 1/5HP YDK/YSK139 Double Shaft Window Air Conditioner Unit Blower Fan Motor 3

Features: (1) Compact structure, large transmission power and high carrying capacity (2) High transmission efficiency (3) Large transmission ratio (4) Various types of assembly, multi-faceted installation, wide applicability (5) The material, gear precision and bearing capacity are at the advanced level among similar products. https://www.china-sr.com/prod , uct/planetary-gear-units/ngws-series- planetary , -gear-reducer.html

Minimum Order: 1000

When you want the accuracy of the drive to be controlled between 0.05 and 0.15 degrees, there is no doubt that the precision type has a unique advantage in the high-end transmission field. Precision PE series rotary mechanism features The high-precision type is processed by the latest technology, so that the tracking accuracy of the product can reach up to 0.05 degrees. The most important feature of the precision type is the ability to achieve precise and precise transmission and accurate positioning. This product also has a flexible input interface form, which is convenient for connection of various hydraulic motors and geared motors. Supply Ability of PE25-1 Precision PE Series We are able to provide you with the fastest delivery and customized services, including a list of parameters for this range of products. Application of PE25-1 Precision PE Series Precision PE series products are widely used in the relative rotating parts of solar energy and machinery. Drive light heat, photovoltaic level and pitch angle rotation. Control the rotation of the welding positioner table. Performence Parameters of Rotary Reducer Output Torque 15 kN.m Overturning monent 203 kN.m Holding Torque 105.8 kN.m Axial static load 1598 kN Static radial rating 640 kN Axial Dynamic load 385 kN Gearing Ratio 125:1 Radial dynamic load 335 kN Tracking Precision ≤0.09° We have slew drive solar and slewing ring drive,contact us now.

Minimum Order: 10 long tons