Machinery

MY-1060H Corrugated Box Cartoon Cardboard Box Automatic Die Cutting Making Machine 1. Automatic Die Cutting Machine is designed for die cutting specially. It suits for more than 80g/m2 paper, cardboard, corrugated paper below 4mm, pasting paper, laminating paper and so on. 2. The machine includes 4 parts: Feeder, paper feed section, main motor and delivery section. And it can finish feeding, die cutting, and collecting work cycle automatically. 3. The feeder is made inTaiwan, it has excellent flexibility, that realize to make a change in the breadth frequently, last and easily. 4. The machine is equipped with automatic lubrication system. And the swing rod and copper tile are all reworked by hand. We scrap the surface and make it full of criss-cross scrath. The groove hold more oil that can ensure smooth going of the operation, and the precision of the pattern.

Paper Carton Feeder Machine Corrugated Cardboard Machine Automatic Cardboard Box Making Machine Functions and Uses: Yangli Automatic paper feeding machine is a continuous paper feeding equipment developed and produced by the original chain paper feeding machine in carton factory. It not only improves the working efficiency, but also reduces the labor intensity of workers and the waste rate.  Paper feed:  Paperboard size adjustment using wire rod adjustment mechanism, one-person operation, simple and rapid.  Convenient adjustable code paper table, better adapt to all kinds of cardboard, and feed paper stable and accurate.  The paper belt adopts Italian imported rubber, high friction, long life, low noise, easy maintenance and high economic benefit.  Double tension control, convenient and reliable.  Transmission:  Drive shaft with pattern spoke, increase friction with paper belt, to ensure smooth and high-speed cardboard delivery.  This machine has electromagnetic clutch separation brake mechanism.  Electrical Department:  This machine adopts small relay control, long service life failure rate is low.  Electrical parts adopt imported and domestic famous brands to ensure stable operation of the machine.  This machine has electromagnetic clutch, electromagnetic brake. And through solid state relay control, the main engine belt start stop flexible and stable.  The main motor adopts frequency converter speed regulation (frequency converter brand can also be installed according to customer requirements).   Dongguang Yangli Carton Machinery Co., Ltd. locates in central Bohai economic circle, In the south north connects the Beijing-tianjin, jinan, water and land transportation is very convenient, ls a modern professional production carton packaging machinery, printing machinery enterprise.

Corrugated Box Printing Machine Cardboard Box Die Cutting Machine Yangli High Speed Printing Slotting Die Cutting Machine is designed and manufactured according to requirements, high standard, high reliability and safety. Adopt PLC independent control, color touch screen display, intuitive parameter setting and display. Corrugated Boxes Machine Description 1.The whole machine is designed and manufacture in accordance with the requirements,high standard、high reliability and safety. 2.The machine adopts PLC control alone, color touch screen display, parameter setting and display intuitive. 3. All the electrical appliances, electronic and pneumatic components adopt international famous brand products. 4.The selection of high quality, high standard materials and accessories. 5. All the main drive gear with special imported materials, with high precision grinding, durable, gear lubrication adopts oil pump spray system. 6. Auto zero reset. 7.You can store different orders, speed up the order operation. 8. The key free collar, long-term effect and high printing precision. High Speed Automatic Printer Slotter Die Cutter Machine CONFIGURATION PARAMETER UNIT MODEL MSB-480-2600 MSB-480-2800 MSB-480-3000 LNNER WIDTH MM 2600 2800 3000 MAX PAPER SIZE MM 1400*2300 1400*2500 1400*2700 MAX PRINTING SIZE MM 1400*2200 1400*2400 1400*2600 INTERVAL FEEDING SIZE MM 1800*2200 1800*2400 1800*2600 MAX SPEED PCS/MM 150 ECONOMIC SPEEED PCS/MM 100-130 TOPPING PRECISION MM ±0.5（four colors) STANDARD PLATE THICKNESS MM 7.2 MIN SLOTTING SIZE SLOTTING TYPE R (MM) 150*150*150*150 SLOTTING TYPE L (MM) 230*60*230*60 MAX SLOTTING DEPTH MM 350   High Speed Automatic Printing Slotting Die Cutting Machine Specifications 1.advanced front feeding system, simple operation, high precision. 2.7.5 kw high pressure centrifugal fan, can adjust the air volume, according to the cardboard warping degree to ensure smooth into cardboard.  3.baffle position by lead screw drive electric adjustment, or baffle pneumatic film device. 4.every piece of paper, can choose according to need every piece of paper and cardboard of large size also can process. 5.and 7 "true color touch screen installation, 200 groups can be preset orders, inquiries orders, zero. The order entry, the machine synchronous zero, phase automatic/manual adjustment, machine parameters management, lift fall edition distributing manual/automatic control, automatic display production quantity and production speed and set production quantity. 6.with slot department is equipped with interlocking control switch, stop, stop sending or reset to send paper, positive and negative rotation, each unit of phase points, humanized operation. 7.with slot department is equipped with interlocking control switch, stop, stop sending or reset to send paper, positive and negative rotation, each unit of phase points, humanized operation. 8.use brush to wipe the dust device, and is equipped with a powerful negative pressure suction fan, remove dust on the surface of the cardboard, paper scraps and other sundry, improve the quality of printing. PRINTING DEPARTMENT 1. the production of high quality steel, surface grinding, hard chromium plating. Static balance adjustment, stable running and adapt to the high- speed operation. 2. roll horizontal direction and circumferential direction henceforth have its official line, convenient to version. 3. ratchet fixed volume axis version, the left and right sides lock device, make hanging version registration more fast and accurate.  4. install the foot switch control plate drum positive &negative, convenient change version. 5.clearance adjustment self-locking worm gear box with high precision, and is equipped with three stem disc handle, convenient and quick. Adjusting range 0 to 11 mm. 6.delicate high quality seamless steel tube processing, steel pipe surface grinding and hard chromium plating, dynamic balancing correction. 7.printing phase PLC touch screen control and electric digital 360 ° adjusted (motion and stop all can be adjusted). 8. automatic zero device, to ensure that the unit has a unified adjust benchmark, testing-run a commonly can adjust the correct position, reducing waste of cardboard. 9. pressure type and automatic lifting gear roller, and idle device, feeding anilox roll down when in contact with the plate, stop feeding anilox roll automatically rise and plate separation, in order to protect the plate; Don't press automatic idling, prevent the ink dries up SLOTTING DEPARTMENT 1. adjusted by electric control knife axis, vertical and cases of high dimensions. 2.clearance adjustment adopts high precision self-locking worm gear box, equipped with three stem disc handle, convenient and quick. Adjust the range of 0-11 mm.  3. planetary gear structure, long service life. 4.slotting phase PLC touch screen control and electric digital 360 ° adjusted (motion and stop all can be adjusted). Phase zero device. 5. double slot, single axis, high box to adjust the internal tooth electrical structure, make the lubricating oil is not easy to pollution of the cartons. And high adjusting box collision protection, not damage the machine. 6.adopt unique play chip type dust removal device, easy to operate.   1.soft roll cutting mechanism to improve slab repeat usage。 2.linear speed automatic compensation to ensure that each batch of carton die- cutting size exactly. 3.the CAM type soft roller transverse moving 40 mm, MATS wear uniform, improve the utilization rate of foot pads to reduce the cost. Die-cutting phase adopts electric 4, 4. 360 ° digital adjustment (motion and stop all can be adjusted). 5.paper feed axis, polishing, plating hard chromium, equipped with four wheel feed. 6.the feed roller gear are no clearance regulating mechanism, adjustment does not affect the gear wheels, guarantee the transmission accuracy.  7.clearance adjustment self-locking worm gear box with high precision, convenient and quick. Adjusting range 0 to 11 mm. Our company is specialized in producing Corrugated Cardboard Production Line, Printing Machine. If you are interested in our products, please contact us as soon as possible.

7 Ply Corrugated Cardboard Production Line Yangli Corrugated Cardboard Cutting Machine Maximum working width: 1400 mm; Operation direction: left or right (according to customer's factory); Maximum mechanical speed: 150 m/min; Length: 800 mm; Paper cutting accuracy: ±1mm for constant speed, ±2 sets for uneven speed. Conventional technical parameters: 1. maximum working width :1400 mm 2. operating direction: left or right (based on customer plant) 3. Maximum Mechanical Speed :150 m/min 4. Mechanical Configuration: Crosscutting of Computer Spiral Knife 5. Minimum Paper Cut Length :500 mm 6. Maximum Paper Cut Length :800 mm 7. Paper cutting accuracy: uniform speed ±1 mm, non-uniform speed ±2 equipment 8. size: Lmx4.2*Wmx1.2*Hmx1.4 9. Single weight: maximum Kg 3500 Roller diameter parameters: 1. cross-cut upper and lower cutter shaft center distance :￠216 mm 2. front and lower conveyor roller diameter ￠156 mm 3. The diameter of the back-down conveyor roll :￠156 mm 4. before the top press roll diameter: mm 70 5. Top press roller diameter :￠70 mm Note: All roller shafts are ground, and the surface is plated with hard chromium (except upper and lower tool shafts).   Power motor and electrical parameters: 1. Main drive motor power：22KW 2. Power of Paper Transmission Machine：3KW 3. Lubricating oil pump motor：0.25KW Our company specializes in the production of corrugated cardboard production lines, carton production lines, we provide customized services, come to consult us!

Minimum Order: 1 bags

Corrugated Machinery Manufacturers Product Description Working Principle: Tile line is the abbreviation of corrugated cardboard production line.It is a streamline line consisting of pressing, corrugating, gluing, bonding, grading, paper making, and code output. Such as single corrugated paper production line is made of web frame, single- sided corrugated cardboard machine, composed of rotary paper cutting unit, using web material and potato or corn starch adhesive, single-sided corrugated board continuous production and cut into the required specifications, production of cardboard no longer dry or dry, and glue machine or laminating machine with the use of, can produce more than three layers of corrugated cardboard.   Equipment configuration and technical description   name quantity remarks Hydraulic reel stand 5 set 1.Multi-point brake, hydraulic drive lift, left and right translation, medium. 2.The guide rail length 6000 mm, the trolley adopts 10 mm medium plate welding. Paper bike 10set Single Paper preheating machine 4set Roller ￠800 mm,including pressure vessel certificate. Electric adjustment package angle. The wrapping angle can adjust the heating area of paper within 360 range Adsorption Single facer machine 2set Corrugated main roller ￠320 mm,material using tungsten carbide. Imported main bearing,PLC automatic glue control,man-machine interface touch screen,paper break automatic stop pressure relief,steam heating mode Triples preheating machine 1set Roller ￠800 mm,including pressure vessel certificate. Electric adjustment package angle. The wrapping angle can adjust the heating area of the paper in the range of 360. Double gluing Machine 1set Cots 268 mm. diameter Each layer of independent frequency conversion motor drive, PLC adjust the glue clearance and man-machine interface. Transport Bridge 2set Main beam 200 mm channel steel, independent frequency conversion motor drive paper transfer, adsorption tensioning. Electric correction Double sided  machine 1set The frame 400 mm national standard channel steel,chromium plating hot plate 600 mm *14 block,the entrance ￠mm hot cylinder causes the surface paper to raise the temperature extremely fast 6 groups to touch the whole process pressure plate design structure. PLC automatic control pressure plate. Temperature display,frequency conversion motor.400   Type electric slitter scorer  machine 1set 10 scourer and 6 slitter Tungsten alloy blade, six-knife ten-wire type, electric row knife, electric lift left and right movemen Computer NC-cut off machine 1set Full AC Servo Control, Energy Storage Brake, Spiral Knife Structure, Oil-immersed Gear Drive Sheet transfer conveyor system 1set Imported high strength belt output, paper side standard conveyor Rubber station system 1set Pipeline customer self-provided. The device consists of carrier tank, main tank, storage tank, rubber pump and rubber pump.  Air supply system 1set Steam components including piping valves, trap valves, meters, etc. in equipment, customer-owned heat source and piping Electrical control cabinet system 1set Electronic control system: adsorption single-sided machine, driving part, electric thin knife machine, double-sided machine, glue coating machine all adopt frequency conversion motor, Delta frequency conversion control system. The operation interface is simple and convenient, the speed display control cabinet is equipped with each unit speed display, the unit calls, the emergency stop function.  The main relay adopts French Schneider famous brand products.  vapour system 1 set Steam components including piping valves, trap valves, meters, etc. in equipment, customer-owned heat source and piping Main technical parameters and requirements of production line Maximum production 1400mm   Design Production Speed 180m/min Three-tier working 100-150m/min   Five-tier working 80- 120m/min Precision of Longitudinal Cutting Paper mm ±1   Cross cutting accuracy mm ±1 The above speed index shall be up to: production width of 1400 mm, meet the following paper standards and ensure that the surface temperature of the heated parts of the equipment is 175℃. Table 2 Surface paper indicators g/㎡100-180 g/㎡ ring pressure index (N.m/g)≥8(moisture content 8-10%) g/㎡100-180≥(N.m/g) Core paper indicators g/㎡80-160 g/㎡ ring pressure index (N.m/g)≥5.5(moisture content 8-10%) g/㎡80-160 g/㎡(N.m/g),5.5(moisture content 8-10%)  Paper finger g/㎡90-160 g/㎡ Ring pressure index (N.m/g)≥6(moisture content 8-10%) g/㎡90-160 g/㎡(N.m/g)6(moisture content 8-10%) Flute type combination   Steam requirements  maximum pressure16kg/cm2 wirking pressure 10- 12kg/cm2  dosage4000kg/Hr    Electricity AC380V 50Hz 3PH Installed capacity ≈250 KW The common power ≈150 KW    compressed air 9 kg/cm2 maximum pressure Common pressure kg/cm2 4-8 Amount m3/min 1    space usage ≈Lmin85m*Wmin10m*Hmin5m     Hydraulic reel stand Structural characteristics：  ★ use full hydraulic drive to complete the base paper clamping,loosening,moving to the middle,left and right translation and other actions,the base paper lift using hydraulic drive.  ★ brake adjustment adopts multi-point brake system.  ★ each paper rack with two paper cars from both sides can be paper at the same time. Technical parameters：  range： maximum 1400 mm minimum 1000 mm 2、 diameter： maximum 1300 mm minimum 350 mm 1  paper frame spindle diameter ：￠240 mm 4、 gas source working pressure (MPA):0.4-0.8 MPA  Equipment Size： Lmx4.3*Wmx1.8*Hmx1.4 5 6. unit weight： maximum Kg 4000   Hydraulic system parameters：  Working pressure (MPA):16-18 MPA 2, lift hydraulic cylinder :￠100×440 mm  Tightening hydraulic cylinder ：￠63×1300 mm 4、 Hydraulic station motor power ：3 KW --380V --50Hz  5, Solenoid valve voltage： V 50Hz 220   Main purchased parts, raw materials and origin: Main Name producing area Material Type  main axle  Tin Steel Production  242mm diameter  swing arm  Production  HT200Resin sand cast iron  wallboard  Jigang Q235A Welded Parts  bearing Ha, Wa, Lo   Tooth paper clip Xu Sheng, Zhejiang 3.4 inches Main electrical appliances  France Schneider    push-button Zhengtai NP2 Series    air switch France Schneider    pneumatic component Sonno, Zhejiang    hydraulic pressure station Shandong Zaozhuang    Brake pump  Zhejiang     Structural characteristics：  ★ track is completely buried,the main frame is 140 channel steel welded with ￠20 mm cold drawn round steel,the track length is 6000 mm.  ★ each paper rack with two paper cars from both sides can be paper at the same time. Push the reel in place. Main Outsourced Parts, Raw Materials and Origin: Main Name Brand or origin Material Type Track and Paper Truck Tanggang or Jigang 14 channel, Q235A、 steel  bearing Ha, Wa, Lo     We are pleased to deliver Corrugated Cardboard Production Line, Corrugated Cardboard Machine. Safe payment and on time deliver time will give you.Our company specializes in the production of corrugated cardboard production lines, carton production lines, we provide customized services, come to consult us!

Minimum Order: 1 bags

Cardboard Stitching Machine Fully Automatic Folder Gluer Machine Yangli Fully Automatic Folder Gluer Stitching Machine consists of five parts: paper feeding part, folding part, nail box part, counting output part and electrical control part. PLC controls the touch screen to input data, the nail box action is controlled by servo motor, the operation is simple and reliable Fully Automatic Folder Gluer Machine Description The utility model is composed of five parts: paper feeding part, folding part, nail box part, counting output part and electrical control part. PLC control touch screen input data, nail box action servo motor control, simple and reliable operation. Automatic paper supply, automatic folding, automatic correction, automatic nailing, automatic counting, automatic stacking output, before and after the whole machine, synchronous adjustment, order storage, distinguish the disadvantages of the assembly equipment of the sticking box machine and the nail box machine. Advanced technology, reliable quality.  Paper delivery:  The main motor adopts frequency conversion speed regulation, the system has no noise, the speed regulation is flexible and stable.  Adopt imported porous leather conveying board, adjust stable, efficient and accurate.  The paper feeding department can be adjusted by electric, which is suitable for the paper supply demand of various specifications cartons.  4, equipped with side-beat equipment to ensure that the paper is not skewed.  B、 folding section  With the paper supply part linkage, frequency conversion speed regulation, folding and paper feeding part pressure line synchronous adjustment.  The imported porous belt conveying paperboard is used to fold automatically and adsorb the whole process, which effectively avoids the phenomenon of skew slip pile paper in the work of various kinds of paperboard, such as weight box, laminating box and light box, and makes the whole machine more stable and efficient.  C、 Calibration Section  This machine will have a shaping device in front of the back of the folding part of the nail box, before the nail box will fold the folded carton again, make sure that the nail out of the carton without scissors mouth.  The calibration part is driven by servo motor.  D、 nail box  The head of the nail box adopts special material, which is wear-resistant and not easy to damage.  The machine features a servo motor driven directly by the nose, stable and accurate speed.  3, the nail thread adopts 2 plates 20 kg large plate flat wire automatic feeding device at a time, reduces the times of wire change, improves the production efficiency.  This machine can carry out the operation of single nail, double nail, reinforcing nail and head and tail nail.  The nail speed can reach 600 nails per minute.  E、 counting, stacking output  Complete the carton, beat again, count, stack and send out automatically.   We are a modern enterprise specializing in the production of carton packaging machinery and printing machinery, specializing in the production of Corrugated Boxes Machine, Corrugated Box Equipment. Strong technical force, advanced production and testing equipment, professional technical and management personnel and high-quality sales team.

Minimum Order: 1 bags

Huatao Group - Corrugator Belt & Spare Parts Web: www.htwirebelt.com www(dot)htwirebelt.com Email: maple@huataogroup.com maple(at)huataogroup.com Tel: 0086 133 8311 0583 WhatsApp: 0086 133 8311 0583 Description: Hydraulic Mill Roll Stand//Corrugated Cardboard Mill Roll Stand/Paperboard Mill Roll Stand: Symmetrical structure, can carry two craft paper at one time, which can work without brake. Reel paper lift-lower, clamp, loosen, movement, contraposition operated by hydraulic pressure. feeding craft / reel paper quickly. Function Of Mill Roll Stand: *Each arm setup four directions button, it is easy to operate *It can be loading two paper rolls at the same time, without stopping the machine for changing paper roll *The whole machine uses 6 cylinders fully hydraulic controlled, hydraulic control arm lift and down, clamping and open, left and right moving *Tension control: multipoint pneumatic brakes, brakes good performance, loses heat fast *The chuck adopts inner expansion type or teeth type, reduce the destruction of the paper core. saving paper. Electric Mill Roll Stand Product Parameters: Max. Working Width 1000mm-1800mm Min. Working Width 700mm Max. Paper Mill Dia 1500mm Maximum paper diameter 1400mm Max. Supporting Weight (One side)                           2T Hydraulic Mill Roll Stand Hydraulic Mill Roll Stand//Corrugated Cardboard Mill Roll Stand/Paperboard Mill Roll Stand :Symmetrical structure, can carry two craft paper at one time, which can work without brake. Reel paper lift-lower, clamp, loosen, movement, contraposition operated by hydraulic pressure. feeding craft / reel paper quickly. Product Parameters:  Mill Roll Stand Parameters Maximum Paper Roll Diameter φ1500mm Effective Width 900mm-2200mm Maximum Support Weight 3t Main Axis φ242mm Pneumatic Source Pressure(Mpa) 0.4---0.8Mpa Magnetic Valve Voltage 380V 50HZ Working Pressure(mpa) 16-18mpa Mill Roll Stand Characteristics The Structure is Double Rotary Shafts with Four Arms Support Two Paper Mill Rolls on both Arms at the Same Time Hydraulic Control for Paper Mill Roller Up-down, Clamp-open and Centering Web Tension Controlled by Pneumatic Brake or Manual Brake Tapered Center, Stretch Center and Springiness Chucks are Optional

Minimum Order: 1 bags

Huatao Group - Corrugator Belt & Spare Parts Web: www.htwirebelt.com www(dot)htwirebelt.com Email: maple@huataogroup.com maple(at)huataogroup.com Tel:0086 133 0311 0583 WhatsApp:0086 133 8311 0583 Product Parameters of Single Facer Corrugated Roller Flute Type Flute Type Flute Teeth/300mm Height of Flute A UV 30±2 4.6-4.9 C UV 39±3 3.6-3.9 CB UV 44±2 3.0-3.4 B UV 50±2 2.6-2.9 BE UV 66±3 1.9-2.1 E UV 90±10 1.1-1.5 F UV 124±10 0.7-0.8 G UV 185±12 0.5-0.65 N UV 200±15 0.4-0.5 O UV 267 or design 0.25-0.35 Description: Tungsten Carbide Corrugating Rolls of Single Facer Machine are highly efficient as they symbolize the most advanced technological development of the Automatic Corrugation Machine Lines. The combination of High Precision Grinding and Cobalt Tungsten Coating enhances the life of the rollers and is economically viable on the production frontier. Peripheral Heating Corrugated Roll is made of high-quality alloy steel& it is a new technology comes recently. It's made by high precision CNC corrugated roll griding machine from the USA. The quality is very good . It is treated by special corrugated roll surface-treated technology. The hardness is very high. High-speed corrugated roll with a big diameter. The maximum working speed is 300 m/min. Gear typr: UV, V. Flute type: A, B, C, BC, D, E, F optional. Fingerless suction ang inner suction are optional. We are engaged in the design, repair, and manufacture of all kinds of corrugating rolls.

Minimum Order: 1 bags

Huatao Group-Corrugator Belt & Spare Parts Web: www.htwirebelt.com www(dot)htwirebelt.com Email: maple@huataogroup.com maple(at)huataogroup.com Tel: 0086 133 0311 0583 WhatsApp: 0086 133 8311 0583 Product Description The spray humidifier can be installed on the different position of the corrugator line to replenish the moisture lost in the production process, making the corruagated card board can maintain the appropriate moisture cotent 12%to 15%. It works well on board corrugators. Install Position 1)The double- sided machine  , sprays lining paper at the entrance to add

Minimum Order: 1 bags

Huatao Group - Corrugator Belt & Spare Parts Web: www.htwirebelt.com www(dot)htwirebelt.com Email: maple@huataogroup.com maple(at)huataogroup.com Tel: 0086 133 8311 0583 WhatsApp: 0086 133 8311 0583 Product Description Cassette type single facer provides convenient maintenance and provides quick flute change. The corrugating rolls changing can be accomplished within 10 minutes utilizing a motorized cassette trolley, by which cassette is delivered into the machine and fixed on the base of the machine. Features 1. Maximum mechanical speed is 250m/min. 2. The diameter of the corrugating rollers is 380 mm. The diameter of the pressure roller is 520 mm. The diameter of the surfaces of glue roller is 302 mm, The diameter of the doctor roller is 170mm. 3. The machine adopts positive pressure air cushion paper guide, with high utilization of heat energy, and good quality of corrugated shaping. 4. Corrugated roller adopts positive pressure cassette type. It’s under the pressure roller, so as to lower the center of gravity of the machine. It’s smooth when under high-speed operation, and reduces vibration, so it’s more stable and smooth during operation. Corrugated roller exchange is saver and faster. 5. Corrugated roller, pressure roller and glue roller adopts individual driving reduction box, to isolate vibration. The oil immersion lubrication and high precision gear driving ensure stable and reliable during operation. 6. Corrugated roller sets get in and out hydraulic automatically, so as to exchange different flutes rapidly. 7. Individual glue section could move out from the main machine, and it’s easy to clean and maintain. An electric glue partition device is provided to give convenient and rapid paper width adjustment. 8. The glue roller has low speed auto-rotate function, so as to avoid the glue dry on the glue roller. 9. A frequency conversion motor is used to supply power, realizing stepless speed adjustment and reliable and synchronous interlock with the following devices. The frequency converter used is an international famous brand product with stable and reliable performance and low failure rate. 10. All bearings of the upper and lower corrugated rollers, and pressure roller adopt high temperature grease, so as to guarantee long life and smooth running of the rollers. 11. The opening and closing of corrugated rollers, pressure rollers, glue rollers, and the locking of corrugated roller set are all hydraulic controlled. 12. There is a face paper pre-heating roller and core paper pre-heating roller in this machine. The pre-heating cylinder could rotate automatically and it is equipped with a manual braking device. There is a conditioning steam injector for core paper installed in the machine. 13. This machine is PLC controlled, and displayed by big color touch-screen. Machine status is displayed by animated image, to achieve strong failure diagnosis ability and operation guiding. 14. The gap adjustment between corrugated roller and pressure roller are hydraulic controlled, and the gap adjustment between corrugated roller and glue roller are electric controlled. 15. The machine is equipped with an automatic plc glue adjustment system. Technical Parameter Paper Width(mm) External Dimensions  (L×W×H)(mm) Weight(T) Total Power of Motor (kW) 1400 5300x3100x2600 12 59.2 1600 5500x3100x2600 14 59.2 1800 5700x3100x2600 16 59.2 2000 5900x3100x2600 18 71.2 2200 6100x3100x2600 20 71.2 2300 6300x3100x2600 21 71.2 2500 6500x3100x2600 23 81.2

Minimum Order: 1 bags

Huatao Group - Corrugator Belt & Spare Parts Web: www.htwirebelt.com www(dot)htwirebelt.com Email: maple@huataogroup.com maple(at)huataogroup.com Tel: 0086 133 8311 0583 WhatsApp: 0086 133 8311 0583 Product Description The Auto Splicer functions as a central element for smooth, continuous operation, fast and helps to increase production output and saving production cost during the corrugated cardboard production process. Auto Corrugated Plant Automatic Splicer Function: 1. No paper tail connecting, reduce the loss of the base paper (the overlap of the base paper about 40mm width). 2. When the paper truck remove, automatically transferred out,vacuum-adsorbed, easy to operate, and fully automatictension control, paper-connecting zero error. 3. All adopt PLC automatic control. 4. When the buffer wheel pull for the first time, it's easy to pull and aligned automatically. 5. Collecting paper controlled by cylinder, will not cause the broken tile and blistering problem. Design speed: Model 300-280 m/min(Flute liner)250m/min(Top liner) Model 400-380 m/min(Flute liner)250m/min(Top liner) Paper Connection: overlap connecting Design width: the maximum paper width can reach 2550mm Weight of the original paper: 50g/m2~350g/m2 Paper reaction completion time: about 1 second Gas source: a minimum of 0.6MPa dry clean air source Power demand: power supply:380V, 50Hz, 20A control power:12V,24V Paper frame brake: pneumatic brake/ magnetic powder brake

Minimum Order: 1 bags

Huatao Group - Corrugator Belt & Spare Parts Web: www.htwirebelt.com www(dot)htwirebelt.com Email: maple@huataogroup.com maple(at)huataogroup.com Tel: 0086 133 8311 0583 WhatsApp: 0086 133 8311 0583 Product Description Gluer Machine Applicable Paper Width: 1,400-2,300 mm Configuration: 1. The designed maximum operating speed is 220 m/min; 2. The glue roller and meter roller adopt modular and built-in design, they can be installed and removed from the operation side to facilitate repair and maintenance; 3. A pressure arm locking mechanism is provided to ensure stable and reliable operation performance of paper pressing roller (touch pressing plate) under high-speed operation state; 4. The gap between the glue roller and the meter roller can be automatically adjusted according to the speed, paper material and flute type; 5. The touch pressing mechanism for glue application is a paper pressing roller, and the gap between the paper pressing roller and the glue roller can be adjusted electrically to facilitate rapid changeover for processing cardboards with different flute types; 6. The glue pan is lifted pneumatically to facilitate cleaning. There are glue blocking plates installed at both ends of the glue pan to well prevent glue from splashing from the shaft ends during high-speed operation of the glue roller and meter roller; 7. Layered independent frequency conversion motor, synchronous belt transmission and relatively independent control are used in the power part to ensure the precision of transmission and to greatly reduce the vibration and noise during operation; 8. Layered independent adjustment and touch panel man-machine interface control are employed, so the adjustment and control are more flexible and directviewing; 9. The floating roller of the pre-heating cylinder is electrically adjustable (this function is optional to users) to facilitate paper passing through and adjustment of angle of contact. GLD6A glue applying machine for 2-layer corrugated cardboard. Paper Width External Dimensions (L×W×H) Weight (T) Whole Machine Power (kW) 1,400 1,450×1,830×2,915 7.4 10 1,600 1,450×2,030×2,915 7.8 10 1,800 1,450×2,230×2,915 8.2 10 2,000 1,450×2,430×2,915 8.6 10 2,200 1,450×2,630×2,915 9.0  10

Minimum Order: 1 bags

Huatao Group - Corrugator Belt & Spare Parts Web: www.htwirebelt.com www(dot)htwirebelt.com Email: maple@huataogroup.com maple(at)huataogroup.com Tel: 0086 133 8311 0583 WhatsApp: 0086 133 8311 0583 Automatic Stacker available breadth: 1400-2200mm Specification: Frequency conversion motor auto down stacker Applicable to be production line whose max speed is 180m/min Max sheet length: 3500mm, max stacking height: 1500mm Connected with production management system, it can read order and change order, which make the orders apart correct and fast. it also can work by itself Stacking of multi orders Conveyer belt was separated to be 4 sections, driven by ac frequency conversion motor, running synchronized with the production line, it brings the suitable stack proportion according to the sheet length, which make paper board stack in good order Transducer control the frequency conversion motor to drive the roller running， speed up and down stably, board come out easily，hard to be overturn Transducer control the brake motor to drive the elevator，with counterbalance， speed up and down stably, speed counterchanges reasonably, make stacking more free and get rid of the paper board crease, improved the life of machine Rolls forms close, and lift with elevator, to reduce the waste Gross power: 30kw WIDTH（MM） DIMENSION (L X W X H)（MM） WEIGHT（T） GROSS POWER （KW） 1400 17000×2400×3200 9 24 1600 17000×2600×3200 10 24 1800 17000×2800×3200 11 24 2000 17000×3000×3200 12 24 2200 17000×3200×3200 13 24

Minimum Order: 1 bags

Huatao Group - Corrugator Belt & Spare Parts Web: www.htwirebelt.com www(dot)htwirebelt.com Email: maple@huataogroup.com maple(at)huataogroup.com Tel: 0086 133 8311 0583 WhatsApp: 0086 133 8311 0583 Slitting Knife For Corrugated Board Used in Corrugated Carton Making Machine used for corrugated carton slitter scorer machine, cardboard slotting machine,carton printing machine etc. They can be made by tungsten carbide with long life working time. We have all standard size and also can customized as customers' requirements. Item Common sizes OD*ID*T(mm) Holes Available for machine Item Common sizes OD*ID*T(mm) Holes Available for machine 1 φ230*φ110*1.1 6 holes*φ9.0 FOSBER 13 φ270*φ168*1.4 8 holes*φ11 K&H 2 φ230*φ135*1.1 4 key slots FOSBER 14 φ270*φ168.3*1.5 8 holes*φ10.5 HSIEH HSU 3 φ220*φ115*1.0 3 holes*φ9.0 AGNATI 15 φ270*φ140*1.3 6 holes *φ11 VATAN MAKEINA 4 φ240*φ32*1.2 2 holes*φ8.5 BHS 16 φ270*φ170*1.3 8 holes*φ10.5 5 φ240*φ115*1.0 3 holes*φ9 AGNATI 17 φ280*φ160*1.0 6 holes*φ7.5 MITSUBISHI 6 φ250*φ150*0.8 PETERS 18 φ280*φ168*1.4 6 holes*φ12 K&H 7 φ257*φ135*1.1 FOSBER 19 φ280*φ202*1.4 6 holes*φ8 MITSUBISHI 8 φ260*φ112*1.5 6 holes*φ11 ORANDA 20 φ290*φ112*1.4 6 holes*φ12 TCY 9 φ260*φ112*1.4 6 holes*φ11 MINGWEI 21 φ290*φ168*1.4 8 holes*φ12 K&H 10 φ260*φ140*1.5 ISOWA 22 φ291*φ203*1.1 6 holes*φ8.5 FOSBER 11 φ260*φ168.3*1.2 8 holes *φ10.5 MARQUIP 23 φ300*φ112*1.2 6 holes*φ11 TCY 12 φ260*φ168.3*1.5 8 holes*φ10.5 HSIEH HSU

Minimum Order: 1 bags