Machine Tools Parts

SHORT DESCRIPTION STYLE Cast Iron FLANGE ADAPTER The gasket seating surfaces on the pipe and on the face of the mating flange must be free from gouges, indentations and deformities of any type for proper sealing. Refer to the installation instructions for complete information. • Vic-Flange Adapters must be assembled so there is no interference with mating components. PRODUCT DETAIL Gasket: (specify choice1) Grade “M” Halogenated Butyl Halogenated Butyl (Brown color code). Temperature range –20°F to + 200°F/–29°C to +93°C. Specifically compounded to conform to ductile pipe surfaces. Recommended for water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. UL classified in accordance with ANSI/ NSF 61 for cold +86°F/+30°C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES. Grade “S” Nitrile (Red color code). Temperature range –20°F to +180°F/–29°C to +82°C. Specially compounded to conform to flanged ductile iron pipe. Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range; except hot dry air over + 140°F/+60°C) and water over +150°F/+66°C. STYLE Cast Iron FLANGE ADAPTER NOT RECOMMENDED FOR HOT WATER SERVICES. 1 Services listed are General Service Guidelines only. Pipe fitting manufacturer should be noted that there are services for which these gaskets are not compatible. Reference should always be made to the latest Victaulic Gasket Selection Guide for specific gasket service guidelines and for a listing of services which are not compatible. Bolts/Nuts: (specify choice) Standard: Carbon oval steel neck track bolts meeting the mechanical property requirements of ASTM A449. Carbon steel heavy hex nuts meeting the mechanical property requirements of ASTM A563 Grade B. Track bolts and heavy hex nuts are zinc electroplated per ASTM B633 ZN/FE5, finish Type III (imperial) or Type II (metric). Optional: Bolts – Stainless steel, meeting the mechanical property requirements of ASTM F593, Group 2 (316 stainless steel), condition CW. Nuts – Stainless Steel meeting the mechanical property requirements of ASTM F594, Group 2 (316 stainless steel), condition CW, with galling reducing coating.

Minimum Order: 10 long tons

SHORT DESCRIPTION Generally, Ductile iron Grooved Equal Cross No180 is used to separate branches of a pipeline as a special pipe fitting. The grooved reducing cross is characterized by a reduced diameter, as opposed to other branches. The cross tee fittings is called a cross if both pipes are of the same diameter. A wide array of wholesale sanitary cross tee branches applications is performed by these fittings, including petrochemicals, oil, natural gas, power plants, food sanitation, building construction, and urban development. PRODUCT DETAIL What are the disadvantages of ductile iron pipe Disadvantages? Ductile Iron Grooved Fittings have the similar corrosion rate to cast iron and steel pipe. Prone to external and internal corrosion. Internal and external protection systems required. Limited number of protection systems available. Polyethylene wrappings can be damaged. Today, Ductile iron Grooved Equal Cross No180 standard compact fittings C153 are commonly used in place of full Body fittings C110. They are designed to be to be more lightweight and more economical to use while providing better flow characteristics.

Minimum Order: 10 long tons

SHORT DESCRIPTION Threaded grooved mechanical tee NPT Outlet with threaded outlet (302) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal. PRODUCT DETAIL What is the purpose of a mechanical tee? Ductile Iron Grooved Fittings create outlets that exit pipes, but the outlet is not necessarily the same size as the main pipe. Indeed, many mechanical tees are reducing, meaning that the branch pipe is smaller than the main pipe. Outlet size is also given in nominal pipe size, not actual size. threaded mechanical tee provide a fast and easy mid pipe outlet the requires no welding. A direct branch connection can be made anywhere you can cut a hole in the pipe. They are mounted to the pipe using a collar and provide a smooth flow area. Gaskets conform to the O.D. of the pipe, they are of a pressure-responsive design, so pipe fitting manufacturers provide a complete seal. Allows easy creation of a BSP threaded branch outlet without using reducing tees, couplings or welding. 2 1/2" (65mm) Female BSP threaded branch outlet Red painted body in ductile iron with an EPDM rubber seal FM (Factory Mutual) & UL certified For use with 6" NB (165.1mm OD) & 2 1/2" NB (76.1mm OD) pipe 2x 5/8" bolts (105mm length) & hexagon nuts included.

Minimum Order: 10 long tons

SHORT DESCRIPTION YINUO Grooved Equal Tee No130 ductile iron grooved fittings: Grooved Equal Tee No130 grooved piping system is reliable and is faster to install than welding, threading, or flanging, resulting in lowest installed cost. it can be adopted to suit standard pipe with cut grooves or standard and light wall pipe with rolled grooves. we are the exclusive agent of the mech brand ductile iron grooved fittings which has the UL/FM certificates. PRODUCT DETAIL What is grooved pipe fittings used for? Grooved Equal Tee No130 pipe couplings and grooved tee are used to join pipes in both wet and dry system. They provided some flexibility in terms of movement and deflection to the piping system. The concept of grooved coupling was invented in 2006 when Yinuo, a pipe fitting manufacturer, designed the first mechanical coupling. FIG 7060 Standard Tee Grooved Equal Tee No130 fitting. Fittings for grooved-end pipe. These Ductile Iron Grooved Fittings are designed to provide minimum pressure drop and uniform strength. Priced and sold as each. 4 in. grooved end fitting Standard tee 16.8 FPM Branch, 6.7 FPM Run 1000 PSI Priced and sold as each Ductile iron conforming to ASTM A 536, Grade 65-45-12. Rust inhibiting paint - Color: ORANGE (standard). Ductile Pressure ratings of standard fittings conform to those of Fig. 7001 coupling. UL listed. FM approved. 1 Year warranty from the date of shipment.

Minimum Order: 10 long tons

Product Description Grooved rigid coupling 3/4 cast iron Coupling YN01UL/FM APPROVED Rigid Coupling: Ductile Iron, 4 in x 4 in Fitting Pipe Size, Grooved, Class 150 China grooved pipe fittings are a proven faster, easier, and safer method of joining pipe and are an economical alternative to welding, threading, or using flanges. There are two basic grooved coupling styles: Flexible grooved couplings/fittings and Rigid grooved couplings/fittings. Flexible grooved couplings/fittings allow a limited amount of angular movement. Rigid grooved couplings/fittings do not allow movement and can be used wherever immobility in the pipe joint is needed, like a flanged or welded joint. Product Overview What are the three types of rigid coupling? In Pipe fitting manufacturers, there are three main types of Grooved rigid coupling 3/4 cast iron Coupling YN01: sleeve, flanged rigid coupling and clamped. For commercial shafting, a rigid coupling may be a sleeve with the shafts pressed into each end or it may be a clamping sleeve. The sleeve on each shaft end may have an external flange with bolt holes. Grooved rigid coupling 3/4 cast iron Coupling YN01 couplings connect rotating members such as shafts and transmit torque and motion. Most rigid couplings are made of aluminum, steel, or stainless steel. Rigid materials examples include corrugated and paperboard boxes, plastic bottles and boxes, aluminum cans, and glass jars. Popular applications include cereal boxes, glass bottles of spirits, cans of soup, and laundry detergent bottles.

Minimum Order: 10 long tons

Today, we’d like to introduce a series of hydraulic relief valve, equivalent to SUN RPEC8, RPGC8, RPIC8, RPKC8 series. These valves are normally closed modulating elements that incorporate an integral pilot control cavity. They are balanced piston design. The RPEC8, RPGC8, RPIC8, RPKC8 pilot control cavity will accept any T-8A pressure control cartridge. When the pressure at the inlet (port 1) reaches the pilot control cartridge’s setting, the modulating element starts to open to tank (port 2), throttling flow to regulate the pressure. The pilot cartridge’s setting determines the difference in pressure between port 1 and port 2. With the -8 control option, the main stage valve should first be installed to the correct torque value. The T-8A pilot control valve should then be installed into the main stage valve to its required torque value. Technical parameters of AAK E-RPEC8, E-RPGC8, E-RPIC8, E-RPKC8 Hydraulic Relief Valves: Max.Operating Pressue: 350 bar (5000 psi) Capacity: 95 L/min (25 gpm); 200 L/min (50 gpm); 380 L/min (100 gpm); 760 L/min (200 gpm) Control Pilot Flow: 0,11 - 0,16 L/min.; 0,16 - 0,25 L/min.; 0,25 - 0,33 L/min.; 0,25 - 0,33 L/min., Pilot Control Cavity: T-8A Maximum Valve Leakage at 110 SUS (24 cSt): 32,8 cc/min.at 70 bar; 49,2 cc/min.at 70 bar; 65,5 cc/min.at 70 bar; 81,9 cc/min.at 70 bar; Temperature: - 40°C ~ +120 °C Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus) Cavity: T-10A; T-3A; T-16A; T-18A AAK hydraulic Pilot-Operated, Balanced piston relief main stage with integral T-8A control cavity, benchmarking SUN RPEC8, RPGC8, RPIC8, RPKC8 series, the service life is 2 times of other hydraulic cartridge valve manufacturers in China. You are welcome to try it out. AAK HYDRAULIC VALVES (834) 2025-01-20

Minimum Order: 1 bags

Today, we’d like to introduce a hydraulic relief valve, equivalent to Rexroth Bosch 05320020. This model was developed for a customer in Poland last in 2024. It has passed the testing last week and approved by customer for mass production recently. This customer purchased this valve from other hydraulic cartridge valve manufacturers in China before but they did not pass the testing or has a too high price. Customer is very happy to have found a supplier with expected quality at a reasonable price. Here are the advantages of this relief valve: 1. Simple structure, reliable operation, and easy maintenance: The structural design of the Rexroth 0532 series relief valve is reasonable, which enables it to perform well in the working process and has low maintenance costs 2. Wide range of pressure regulation: This series of relief valves has a wide range of pressure regulation, which can be adjusted according to actual needs to meet the needs of different working conditions 3. Long service life: The Rexroth 0532 series relief valve has a long service life, which can reach a working life of more than 10 million times 4. Equipped with remote control function: By using a proportional electromagnet, the overflow pressure can be easily adjusted to achieve remote control 5. Excellent pressure regulation performance: able to quickly and accurately regulate the pressure of hydraulic systems, maintain system stability, and improve system efficiency and reliability 6. Strong durability: using high-quality materials and advanced manufacturing processes, with a long service life Technical parameters of AAK E-05320020 Hydraulic Relief Valve: Operating Pressure: P-max: 350 bar; T-max: 210 bar Flow: 120 L/min (8 gpm) Internal Leakage: 1cm³/min. Temperature: - 30°C ~ +80 °C Fluids: Mineral-based or synthetics with lubricating properties Viscosities: 7.4 to 420 cSt (50 to 2000 sus) Cavity: 0532002014-CK AAK E-05320020 hydraulic relief valve, benchmarking Rexroth Bosch 053200200, you are welcome to try it out. AAK HYDRAULIC VALVES (833) 2025-01-13

Minimum Order: 1 bags

Today, we’d like to introduce a hydraulic screw-in cartridge direct-acting relief valve, equivalent to Italy VIS Hydraulics RVC0.M22. This is a same type of valve as the RVC0.S08 that we introduced last Monday, but just a bigger size and flow rate. Due to its compact size, stable performance, and competitive price, it is favored by many foreign customers, especially the customers in Europe. AAK hydraulic screw-in cartridge Direct-Acting Relief Valve 2 advantages: 1. The quality of this valve is benchmarking VIS Hydraulics, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-RVC0.M22 Hydraulic Screw-in Cartridge Direct- Acting Relief Valve: Operating Pressure: 350 bar (5000 psi) Max. Flow: 50 lpm (12.5 gpm) Internal Leakage: 0.25 cc/min (5 drops/min) max. to 80% of nominal setting Temperature: - 30°C ~ +110°C Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus) Cavity: VH045 AAK E-RVC0.M22 hydraulic screw-in cartridge direct acting relief valve, benchmarking Italy VIS Hydraulics RVC0.M22, you are welcome to try it out. AAK HYDRAULIC VALVES (832) 2025-01-06

Minimum Order: 1 bags

Terberg Industrial Tractor Gear Handle New Condition T25043718 201.246 Kalmar Brand Terminal Tractor Equipment Multi-Stage Cylinders R0703003H Nylon Bushing Kalmar Container Crane Material Handling Equipment Part Model N5802420 Kalmar Container Crane Drive Axle J013884 Drive Shaft Material Handling Equipment Part Gear Shaft Kalmar Container Crane Drive Axle J013855 Material Handling Equipment Part Copper Bushings N5757350 Essential Parts Kalmar Container Crane Equipment Material Handling ZPMC New Crane Equipment Sprocket Pin Shaft Model TEL4000-06D ZPMC New Crane Equipment Roller Assembly Model D21-163A-02020100 ZPMC Crane Equipment Parts Cushion Hoists Model KZJ-0105A KALMAR part Pressure charging valve Acc. charging valve 923543.0025 923543.0070 Filter assembly 922316.0006 Fantuzzi CS45KL reach Stackers DOUBLE GEAR PUMP 2204.010.0035 Ignition key 920451.005 6JB 003 959 001 Controller and MD3 Display 6043.097 6043.143 20072409 DANA gearbox Electromagnet Valve core coil 4304124 Brake pedal 2577.020.0009 Konecranes Transmitter signal pressure 0-600 bar 0019731240 060G3576 kalmar part SUN Solenoid valve core Spool 923855.1187 DMDA MAN volvo TAD851VE pressure sensor :21634021 KALMAR Reach stacker Seal kit N00163.5300 Electro valve 762693 D1VW022CNJW91 KALMAR Aluminum Alloy valve 923636.0374 91217345B Konecranes Foot throttle 801148.01 6043.061 Headlamp 6040.089 1CA 360 201-011 Air conditioning drying bottle 26-0018 SANY part friction plate Disk 60120550 1210.002.061 Konecranes part Harness C CAB ARMREST ADAPTER 452553.01 Kalmar Stacker Servo controls Control Valve 920113.051 920113.033 Oil pressure sensor 21202753 SMV ELME Spreader Electric control unit 54105509 213586 Pressure limiter 54104447 kalmar Gear shift switch Control 203.479 920476.016 SMV7-8ECB90 Block hydraulic charging 6055.218 3772048 KALMAR DCT80 PARKER HYDRAULIC PUMP 923142.0037 7049111047

Minimum Order: 1 bags

Today, we’d like to introduce a Hydraulic Proportional Flow Control Cartridge Valve equivalent to Bucher SRCB. In the SRCB series of proportionally operated flow control valves, the optimized design of the pressure compensator ensures constant speeds at the hydraulic actuator. The valves can be used as 2-way or 3-way units. As the 3- way version, they divide the inlet flow into a constant-flow / priority-flow portion and a surplus-flow portion. The surplus flow can be pressurized. The valve is mainly used in snow removal equipment, and is highly favored by Russian customers. One of our Russian customers purchases it regularly every month. They have also been shipped to customers in Turkey, Sweden, Canada and USA. AAK hydraulic proportional flow control cartridge valve 2 advantages: 1. The quality of this valve is benchmarking Bucher, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SRCB Hydraulic Proportional Flow Control Cartridge Calve: Operating Pressure: max. 315 bar Min.Pressure Difference (Pressure Compensator): 7 Fluid Temperature Range: - 20℃ ~ + 80℃ Inlet Flow: max.100 l/min. Leakage: max. 100 cm³/min. at 100 bar Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus) Cavity: CSRCB3 AAK E-SRCB hydraulic proportional flow control cartridge valve, benchmarking Bucher SRCB, our European and US customers have been purchasing it since 2022. You are welcome to try it out. AAK HYDRAULIC VALVES (826) 2024-12-09

Minimum Order: 1 bags

In June of 2022, a Brazilian customer placed the test order from AAK for an Electro-Proportional Priority Flow Regulator Valve Cartridge equivalent to HydraForce standard part PV72-30. It is a solenoid operated, pressure compensated, spool type, normally closed, proportional priority flow control valve. After 1 year of testing, the customer placed the bulk order for 1,000 pcs in July of 2023. Last week, we received their bulk order again for 1,000 pcs. Per customer, this valve has a very stable performance and received positive feedback from market. AAK hydraulic solenoid operated proportional priority flow control valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-PV72-30 hydraulic solenoid operated proportional priority flow control valve: Operating Pressure: Port 1: 240 bar (3500 psi); Port 2 and 3: 207 bar (3000 psi) 3 Ported Flow: 0 to 57 lpm (0 to 15.0 gpm) Note: For "A" flow range 0 to 38 lpm (0 to 10.0 gpm) Note: For "B" flow range 3 Ported Max. Input Flow: 114 lpm (30 gpm) Note: For flow range "A" and "B". 2 Ported Max. Input Flow: 53 lpm (14 gpm) Note: For flow range "A" 31 lpm (8 gpm) Note: For flow range "B" Note: For increased flow capacity in a 2-port flow control Internal Leakage: 0.38 lpm (0.1 gpm) Note: Max. at 207 bar (3000 psi), 0 current Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus); Cavity: VC12-3 AAK E-PV72-30 hydraulic solenoid operated proportional priority flow control valve, benchmarking HydraForce PV72-30, our Brazilian customer has been purchasing it since 2022. You are welcome to try it out. AAK HYDRAULIC VALVES (825) 2024-12-02

Minimum Order: 1 bags

The multistage pump is a centrifugal pump that combines the inlet and outlet sections and the middle section through a tie rod. Its output water pressure can be very large, and it also relies on the rotation of the impeller to obtain centrifugal force to obtain materials. When the gas density reaches the working range of the mechanical vacuum pump, it is pumped out, thereby gradually obtaining a high vacuum. - Single case, multilevel impeller, metal liner, horizontal centrifugal pump - The Head reaching several hundred meters - Wet parts such as casing, impeller, liner plate in anti-abrasion and corrosion-resistant high chrome cast iron alloy. Technical Specifications Performance and main Technical Datas of MD Series Anti-Abrasion Multistage Pump Type Allowable  max.power of  ass.motor(kW) Clear water  performance Particle max. Size handled  occasionally (mm) Pump weight (kg) Q Capacity (m3/h) H Head (m) n Speed (r/min) Max.eff. (%) (NPSH)r (m) MD280-65 560 122-376 150-413 980-1480 69.1 6.5 20 2532 MD15-40×6 75 5.3-24 57.4-280.4 1480-2900 49 2.5 / 1150  Application - Power plant ash-handling system - Handling low concentration fluid with solid in coal, metallurgical, mining and chemical sectors.

Gearbox integrated dredging pump is a new structure pump designed by SGB. This type of pump saves a lot of space and cost. As dredging pumps lie at the heart of the dredging challenge. Their power, capacity, resistance to wear and misfunction, and general robust and reliable character are essential features. SGB gearbox integrated dredging pumps have taken into account the above characteristics in design to provide customers with optimized solutions. Pump Features - Advanced hydraulic model, CAD-aided design, high efficiency and remarkable energy-saving effect. - Strong flow capacity. The pump can pump gravel, high plastic clay lumps and so on. Dredge pump is generally equipped with three vanes or five vanes, used to handle different particle size respectively. - Strong matching capacity. The diesel engine and the motor are both available. - Small size, light weight.The whole machine and every component of the dredge pump all adopt optimization design and strength analysis, this can greatly reduce  the pump weight by minimizing unnecessary auxiliary structure and process structure on the premise of satisfying the performance and  application requirements. - Stable running. small vibration and low noise. The dredge pump uses high- level static balance , optimum speed and auxiliary support structure of pump head to ensure  stable operation during the production process of impeller. The pump has good cavitation performance to ensure strong suction capacity. greater dredged depth and higher concentration of inhalation medium.

- Single stage, single suction, vertical centrifugal pump - Wet parts such as casing, impeller, liner plate in anti-abrasion and corrosion-resistant high chrome cast iron alloy. - For fluid of high concentration, inlet agitator is designed -According to the depth of the pit, suction pipe can be added to the pump inlet. - Hydraulic optimization design and stable operation Technical Specifications Performance and Main Technical Datas of TL Desulphurizations Pumps Type Allowable  max.power of  ass.motor(kW) Clear water  performance Particle max. Size handled  occasionally (mm) Pump weight (kg) Q Capacity (m3/h) H Head (m) n Speed (r/min) Max.eff. (%) (NPSH)r (m) 150TL-A35 30 99-364 3.0-17.9 490-980 69.0 / 15 712 100TL-A34 45 74-293 5.5-36.8 700-1480 65.8 / 14 502 80TL-A45 110 59-286 12.5-81.6 700-1490 58.4 / 15 785 80TL-A36 45 50-201 7.3-45.5 700-1480 58.2 / 12 645 65TL-A40 45 30.2-142.8 10.2-62.6 700-1480 50.0 / 12 658 65TL-A30 18.5 18-98 5.9-34.7 700-1470 53.7 / 8 436 50TL-A45 55 21.9-117.3 10.4-78.4 700-1480 39.9 / 9.5 778 50TL-B40 30 15-65 8.6-58.3 700-1470 34.1 / 9 502 50TL-A35 22 19-87 6.8-45.3 700-1470 48.1 / 15 498 40TL-A35 18.5 9.4-47.6 7.2-43.9 700-1470 38.7 / 7 524 40TL-B25 5.5 4.9-22.9 3.9-21.5 700-1440 37.6 / 8 225 40TL-A21 4 4.6-25.9 3.3-17.0 700-1440 44.6 / 10 210 25TL-A15 5.5 4.3-19.3 3.9-30.8 1390-2900 29.8 / 8 195