Other Machinery

Hydrocyclones Are Devices Used To Treat Produced Water In The Petroleum Industry What is hydrocyclone used for? A hydrocyclone is a high-throughput gravity separation device used for separating slurry particles based on particle weight. For example, particles of similar size but different specific gravity, or particles of different size but identical specific gravity. What is hydrocyclone classification? Hydrocyclone is a classification equipment widely used at present because of its high classification efficiency, small floor space and low price. It can be applied in the mineral classification, sewage treatment, slurry concentration, desilting and oil and water separation, etc. Hydrocyclone 10" technical specification Cone size 10 inch Material Polyurethane Capacity About 90 to 120 cubic meters per hour Color Red or black for option Working pressure 0.25-0.45Mpa Temperature resistance 80 degree Usage Drilling mud cleaner, drilling mud desander

Offset Prepress Plate Making Machine UV CTP 1. Application EcooGraphix UV CTP (Computer To Plate) Plate making Machine is the first Prepress necessity of quick short-run offset printing. It can Output the Images on the computer to Printing CTP plate directly though the CTP machine and save the film and labor. By the EcooGraphix CTP, the customer can get Excellent output image quality,highly reliable stability,less space occupied with more flexibility. EcooGraphix UV-800 series CTP are for A2 or B2 paper size newspaper or commercial printing with the output speed 16PPH to 28PPH. The CTP is operated by manual,very easy to use. 2. Characteristic Maximum size of plate: 1,130×920mm Features: Less manpower, high stability and perfect output quality. UV plates are available for you to lower production cost.

Load Capacity: 1000 Kg Power: 2KW Voltage: DC12/V24V Platfrom Material: Steel or Aluminum Max lift height: 1200 MM Platform Dimension(W*H) 1800*1700 MM Weight: 290--390 Kg Lift speed: 60--90 mm/s System Pressure: 18Mpa Tail lifts are available for many sizes of vehicle, from standard vans to articulated lorries, and standard models can lift anywhere Tail lifts make it much easier to safely load and unload trucks and are synonymous with cost efficiency, flexibility and save labor cost,improve the working efficiency.

10 Bags / Min 30kg Automatic Weighing And Packing Machine Gravity Filling Automatic Weighing And Packing Machine is suitable to use in packing the high accuracy and easy fragile material , such as : puffy food ,crispy rice , potato chips , snacks , candy , pistachio , sugar , apple slices , dumpling , chocolate ,pet food , small wares etc . Technical Parameters No. Item Parameter Material of premade bag Premade PP woven Bag/Lamilated film 1 Packaging specification 10kg-50kg 2 Speed 6-10 bags/min(regarding to different size); 3 Weighing accuracy 0.2-0.5% 4 Power supply 380V±10% 50Hz 14 KW 5 Machine weight 2000kg 6 Machine size 5700*2800*4900mm 7 Air supply source 0.6MPa, 0.5m3/min

Stick packing mullthead weigher for pet food Stick packing mullthead weigher for pet food Application: The system is applicable for quantitative weighing and packaging of food products like long biscuits, ice pops, pet food ,ham sausage, etc. and long stick-shaped products in chemical and hardware industry. Stick packing mullthead weigher for pet food Main Function & Features: 1. Main rotary vibration pan ensures even product distribution onto V-shape linear vibrating pans in order. 2. Conical feeding and weighing hoppers enable the product to fall vertically without any blockage. 3. Independent discharge chute design for product storage. Vibrating feeding device to avoid product from blockage or lying horizontally, ensuring product falling into bagger machine vertically and evenly. 4. Low investment and high return. High speed and efficiency. 5. Imported PLC control system with human-machine interface and easy operating touch screen, maximizing the machine’s reliability and intelligence. 6.Special design hoppers / linear pans for long sticks products, and sorting in one direction.

High Productivity solid auto brick machine series details intrduction 1 . Machine feature Vacuum brick machine extrusion pressure, high vacuum, dense mud, clean appearance. Fully suitable for one yard of combustion process requirements, high productivity, low water content of molding, reduce energy consumption and loss in production. It is an ideal equipment for producing all coal gangue, high volume fly ash, shale and low quality sand brick. 2 . Techical parameter Date Units of meas JKY150 - 4.0 Production capacity Pieces/h 45000-66000 Reamer diameter mm 750 Pressure Mpa 4.0 Moisture content % 13～18 Vacuum degree Mpa ≤-0.092 Power kw 450+200 Size mm 11000×3300×3700 Weight kg 48000

Hot Selling Weft Feeder for Water Jet Loom,High Quality Water Jet Loom, ELO/ETU Electronic Feeder with brand motor Product Overview On the basis of the original ordinary water jet loom, the RFJ871 series machine strengthens the optimized design of the large wall plate, the support, the widened middle wall plate and the outward movement of the sled clamping device, so that the movement is more stable and reliable. PRODUCT SPECIFICATIONS No Item Data 1 Power 3.8KW 2 Bucket capacity 2.8 M3 3 Operating weight 3Ton 4 Weft insertion Single pump with single nozzle Positive cam plunger pump Intermittently adjustable annular nozzle 5 Motor power 2.8KW~3.7KW 6 Auxiliary power 0.7KW~1.5KW;

Preformed dead end for OPGW is made of aluminum-clad steel wire or galvanized steel wire,It is designed as two layers structure consisting of structural reinforcing rods and dead end component to terminate Optical Ground Wire (OPGW) .The product grips the OPGW cable to prevent damaging the strand or internal optical fibers, and the holding strenth is not less than 95%RTS of the OPGW cable.The ground wire with compression terminal can be provided.During installation,care should be taken to ensure a successful installation .This product is intended for use by trained crafts people only. Model Range of Dia. of Cable Length of Reinforcing Rods (mm) Length of Outer Rods (mm) Weight(kg) Broken Strength(KN) Minimum(mm) Maximum(mm) ONY 0780 7.2 7.8 1400 1000 1.1 70 ONY 0880 7.9 8.8 1400 1000 1.15 70 ONY 1010 8.9 10.1 1400 1000 1.28 70 ONY 1140 10.2 11.4 1540 1120 1.7 90 ONY 1280 11.5 12.8 1620 1200 2.41 112 ONY 1410 12.9 14.1 1660 1240 2.55 112 ONY 1550 14.2 15.5 1840 1360 2.89 112 ONY 1730 15.6 17.3 2000 1480 3.61 112 ONY 1920 17.4 19.2 2400 1800 4.68 112 ONY 2110 19.3 21.1 2600 2000 5.14 112

New Design Linear 6-16 Nozzles Flow Meter Liquid Filler Bottle For Car Oil Lubricant Oil Filling Machines Packing Line Description This type filling system is flow meter type which is the better ideal for oils filling packing The principle of the elliptic gear flow meter is to measure the rotation of the elliptic gear by the pressure head of the measured medium. The greater the viscosity of the medium, the smaller the leakage from the gear and the space gap, the greater the viscosity of the medium, the smaller the leakage error and the more favorable for the measurement. The elliptical gear flow meter has high accuracy and is suitable for the measurement of the flow rate in the medium with high viscosity, especially for the filling of different labels and different viscosity. Suitable for fill : Lubricant Oil / Car Oil / Motor Oil / coolant liquid / engine oil / Lubricanting Oil kinds Products Filling Range : 50ml -1000ml 1L -5L 4L -20L 208L / 220L -1000L Speed can be choosen : from 1000BPH-6000BPH (basic on 1L ) contact us for more details Feature: 1.Stainless steel and sanitary pipes are used, and the connection parts are all fast-connected. 2.A liquid holder which is controlled by an individual cylinder is installed under the filling nozzles. It can avoid the pollution to the bottle after the filling nozzles are OFF. 3.The material level sensor is used to check the level position under normal running of the machine, plus with high and low level check and alarm device. A filter is installed in the tank (very easy for disassemble). It can improve the precision of filling and life of the filling valves. 4.We use the latest PTFE sealing parts which can improve the abrasion resistance of the sealing parts (24 months). It solves the problem that piston filling machine can not be used for SC, EC and high-viscosity.

Main Features: This machine is suitable to handle different materials, such as PP, A-PET, R- PET, C-PET, BOPS, HIPS, PP, PLA, PVC and barrier material. It could produce many items such as Sandwich Plastic Box Container, clam-shells, nursery trays and plates. It could use for making different products by easily changing mould. Specifications: Model HT 800-700 HT MS720-600 Applicable thickness 0.15-2.0mm Forming Depth 120mm Speed 20-35 shot/min Rated power 198 KW 120 KW Servo stretch 4.5 KW 3 KW Servo feeding 3 KW 3 KW Forming diaphragm servo 4.5 KW 3 KW Punching and shearing diaphragm servo 11 KW 7.5 KW Stack servo 3 KW 2 KW Knife line width 14m 10m Total weight 13 T 11 T Machine Size 12 X 2.7 X 2.4 m 12 X 2.7 X 2.3 m Suitable Material PP,PS,HIPS,PET,PVC,Bio degradation Starch Material

Product Name AvalonMiner 1146 Pro Algorithm SHA256 Hashrate 63T P , ower Consumption 3276W Minable coin BTC Canaan Avalon miner 1146 Pro is a bitcoin miner released in August 2020. Miners using SHA-256 algorithm are the best and safest algorithm for mining bitcoin. The hash rate is 63 Th / s, the power consumption is 3276w, and the efficiency is 0.052j/gh. With four fans to help cool. Set the humidity to 95% maximum and 5% minimum. There is also a temperature preference of up to 35 ° C and down to 5 ° C.

Hot dip (or hot) galvanizing is the technology to dip the pretreated original plate of carbon steel into meltedliquefied zinc to obtain a protective zinc coating. For good anticorrosion performance, galvanized steelsheet is vastly applied into the industries of home appliance, decoration,advertisement, and civil construction, etc. Particularly, the home applianceindustry (outer shell of air conditioner, outer plate of refrigerator, outershell of washing machine, computer, and microwave oven, etc) and color coatedplate has large demands on galvanized plate. The purpose of the Continuous Galvanizing Line is to apply a coat of zinc onto the surface of steel sheets in ano effort ot increase their corrosion resistance. There is a wide range of control of zinc coat thickness, and the galvanized steel sheets are used for a broad range of purposes, including construction materials, automobiles and electrical applicances. We provide two kinds of technologiesof hot dip galvanizing (galvalume) lines: "United States Steel Corp"and independently researched and developed “JJRS- Sendzimir” . Product name Steel wire electro Galvanizing Production Line Name Steel Wire Electro Galvanizing Continuous Line Usage Steel Wire electro Galvanizing Speed Can be adjustable, 10-120m/min Production mode double/single work line Material Low/Medium/High carbon

SZHL 508 Poultry Chicken Cattle Pellet Making Machine 10t/h Quick introduction : Feeder and conditioning device adopt stainless steel material, durable use. Electromagnetic speed regulating control of feeder . Host drive with high precision gear drive for easy ring die lifing . Magnetic magnet and overload protection device is equipped to protect main shft of animal feed pellet mill . SZLH series type poultry chicken cattle pellet making machine with the international advanced level, the latest technology, low failure models.It can process different materials such as corn, maize, grass, grain, SBM, MBM, alfalfa, molasses, straw, and some other raw materials. Main techinical data : The Main Parameters Of Animal 508 poultry pellet making machine Model Main Power Feeder Power Conditioner Power Dia.ofRing Die Pellet Size Capacity SZLH250 22KW 0.75KW 1.5KW 250mm 2-12mm 1-2T/H SZLH320 37KW 1.5KW 2.2KW 320mm 2-12mm 3-4T/H SZLH350 55KW 1.5KW 3.0KW 350mm 2-12mm 5-7T/H SZLH420 110KW 1.5KW 7.5KW 420mm 2-12mm 8-12T/H SZLH508 132/160KW 2.2KW 11KW 508mm 2-12mm 10-18T/H

This multi-functional foam cutting machine adopts high temperature melting wire for cutting. The electric hot wire material is usually made of Gr20Ni80, titanium, stainless steel or coarse wire. It can cut quickly and has no sundries. This electric heating wire cutter cuts slightly shorter and lighter than our widely available D6 series. The EPS cutting machine can be heated quickly, the temperature can reach 450℃ in a short time, the product waterproof grade IP44, high efficiency, easy to use and practical, can effectively solve your sponge cutting inaccurate, cutting trouble and other problems. This electric hot wire cutter is equipped with metal tube to move the table legs, which does not hurt the ground and saves manual handling costs. At the same time equipped with spare electric wire and electric wire installation tools, prolong the service life of the product. Profiles are still made of metal alloy shelf, strong hardness, no deformation, no rust. In addition, the shop provides separate accessories purchase and private customization services, if you have requirements, please consult customer service. Product Number WD8-3 Type of Power Supply All copper transformer Dimension of Worktable 1450*350 mm Max Cutting Length 1170mm Max Cutting Height 300mm Cutting Adjustment Angle 0°- 90° Aluminum Surface Treatment Yes Carton Package Size 1505*425*160 mm