Iron & Steel

Reno Mattress high corrosion resistance Reno Mattress Reno Mattress wholesale high ductility Reno Mattress Reno Mattress with PVC coated RENO MATTRESS is the  one special specifications whose height is less than 0.5m and made of low carbon steel wire with high corrosion resistance, high strength and ductility, or steel wire coated with plastic PVC/PE, which are woven mechanically. the diameter of low carbon steel wire used varies according to the engineering design requirements according to EN10223-3 and YB/T4190-2018 standards. The tensile strength of the wire is generally between 2.0-4.0 mm and 350~500 N/mm², and the weight of the metal coating is generally higher than that of 245g/m2 . The selvedge wire diameter of  is generally larger than the diameter of the mesh wire to ensure the overall strength.   There are four main materials of high corrosion resistance Reno Mattress： （1） Galvanized steel wire: high quality low carbon steel wire, the diameter of steel wire ranges from 2.0 mm-4.0mm, the tensile strength of steel wire ranges from 350~500 N/mm², the surface of steel wire is protected by hot dip galvanizing, the thickness of galvanized protective layer is made according to customer requirements, and the maximum amount of galvanizing can reach 350 g/ ㎡. （2）Zinc-5%(10%) Aluminum-mixed rare earth alloy steel wire (also known as Galfan) steel wire, which is a new international material in recent years.The corrosion resistance is more than three times the traditional pure galvanized steel wire, wire diameter up to 2.0 mm-4.0mm, wire Tensile strength 350~500 N/mm². （3）Steel wire with  PVC or PE coated: This layer of protective layer will greatly increase the protection in high pollution environment, and through the choice of different colors, it can be integrated with the surrounding environment.  （4）Zinc-5%(10%) aluminium-mixed rare earth alloy steel wire with PVC or PE coated: a PVC or PE protective layer is wrapped on the surface of zinc-5% aluminium-mixed rare earth alloy steel wire, and then woven into mesh of various specifications. This protective layer will be greatly increased in highly polluting environments protection in, and through the choice of different colors, so that it can blend with the surrounding environment.   Application of DUOJIYUNJIN reno mattress: control and guidance of rivers and floods The most serious disaster of the river is the destruction caused by the erosion of the river bank by the current, which causes flooding, resulting in a large loss of life and property and a large amount of soil erosion. Therefore, when dealing with the above problems, the application of the gabion structure becomes one of the good solutions, which can make the river bank of the river bed be protected for a long period. Channel Canal Riverbed The construction of channels involves the stability of slopes and river beds. Therefore, Gabions are the main method used in many natural river reconstruction and artificial channel excavation in the past hundred years. It can effectively protect river banks or riverbeds, and it also has the function of controlling the flow of water and preventing water loss, especially in environmental protection and water quality maintenance, which has a good effect. River bank protection The application of Gabion and river bank protection and slope foot protection are very successful examples. It has brought into full play the advantages of gabions and made the unique effect. Reno Mattress is the one special specifications whose height is less than 0.5m, which is made of low carbon steel wire. Choose us, you can be get most careful and thoughtful service! https://www.hcgabion.com/product/11.html

Minimum Order: 1 bags

DUOJIYUNJIN Gabion Corrosion Resistance Gabion PVC coated gabion custom gabions for sale gabion baskets suppliers Gabions are made of low carbon steel wire with high corrosion resistance, high strength and ductility, or steel wire coated with plastic PVC/PE, which are woven mechanically. the diameter of low carbon steel wire used varies according to the engineering design requirements according to EN10223-3 and YB/T4190-2018 standards. The tensile strength of the wire is generally between 2.0-4.0 mm and 350~500 N/mm², and the weight of the metal coating is generally higher than that of 245g/m2 . The selvedge wire diameter of  is generally larger than the diameter of the mesh wire to ensure the overall strength.   There are four main materials of DUOJIYUNJIN Gabions ： （1） Galvanized steel wire: high quality low carbon steel wire, the diameter of steel wire ranges from 2.0 mm-4.0mm, the tensile strength of steel wire ranges from 350~500 N/mm², the surface of steel wire is protected by hot dip galvanizing, the thickness of galvanized protective layer is made according to customer requirements, and the maximum amount of galvanizing can reach 350 g/ ㎡. （2）Zinc-5%(10%) Aluminum-mixed rare earth alloy steel wire (also known as Galfan) steel wire, which is a new international material in recent years.The corrosion resistance is more than three times the traditional pure galvanized steel wire, wire diameter up to 2.0 mm-4.0mm, wire Tensile strength 350~500 N/mm². （3）Steel wire with  PVC or PE coated: This layer of protective layer will greatly increase the protection in high pollution environment, and through the choice of different colors, it can be integrated with the surrounding environment. （4）Zinc-5%(10%) aluminium-mixed rare earth alloy steel wire with PVC or PE coated: a PVC or PE protective layer is wrapped on the surface of zinc-5% aluminium-mixed rare earth alloy steel wire, and then woven into mesh of various specifications. This protective layer will be greatly increased in highly polluting environments protection in, and through the choice of different colors, so that it can blend with the surrounding environment.   Application of Gabions: control and guidance of rivers and floods The most serious disaster of the river is the destruction caused by the erosion of the river bank by the current, which causes flooding, resulting in a large loss of life and property and a large amount of soil erosion. Therefore, when dealing with the above problems, the application of the gabion structure becomes one of the good solutions, which can make the river bank of the river bed be protected for a long period. Channel Canal Riverbed The construction of channels involves the stability of slopes and river beds. Therefore, Gabions are the main method used in many natural river reconstruction and artificial channel excavation in the past hundred years. It can effectively protect river banks or riverbeds, and it also has the function of controlling the flow of water and preventing water loss, especially in environmental protection and water quality maintenance, which has a good effect. River bank protection The application of Gabion and river bank protection and slope foot protection are very successful examples. It has brought into full play the advantages of gabions and made the unique effect. Gabion boxs are made of low carbon steel wire with high corrosion resistance, high strength and ductility. Gabion can be used in many places such as river bank protection,Please click here to learn more. https://www.hcgabion.com/product/17.h , tml

Minimum Order: 1 bags

DUOJIYUNJIN Welded gabion High strength steel wire mesh Wire Mesh Gabions supply Gabion Retaining Walls Welded gabion is made of high quality galvanized steel wire . The mesh opening  is rectangular or square, filled with block stone or natural pebbles inside it, which can be used for highway, slope protection, roadway protection, bridge protection retaining wall and so on. It has the advantages of permeability, integrity and so on.   Welded gabion can not only hold stone, or even more fine sediment, fill materials from local materials, especially suitable for the lack of stone in the river or coastal use. With the help of advanced tools such as excavators and forklifts, the installation effect is tens or even hundreds of times that of traditional sandbags.   Welded gabion and geotextile are assembled and sewn to contain fine sand, earth and stones; they are made into anti-explosion walls. As military equipment, they can be used as temporary bunkers, fortresses and pre-war headquarters for anti-riot and anti-explosive use by combat forces to replace traditional artificial trenches, effectively block the attack of guns and bullets, effectively reduce casualties among soldiers and personnel, and can be recycled. Our company produces as many as 12 specifications of explosion-proof cages, earth gray, khaki, grass green and other colors, and can be flexibly combined to be used in different scenarios or uses.  Advantages of DUOJIYUNJIN welded gabion : welded gabion surface is smooth and neat, mesh uniform, solid solder joint, with strong fastness, corrosion resistance, permeability and integrity and other advantages. welded gabion is cheap and easy to install, it is an ideal choice for yard decoration and slope protection greening. welded gabion has strong ability to resist natural damage and adverse weather effects. welded gabion has great tensile capacity. The spot installation of welded gabion is simple, quick and convenient, and the structure is pretty beautiful, and it has high working efficiency. Welded gabion is made of high quality galvanized steel wire, which can be used for highway, slope protection, roadway protection, bridge protection retaining wall and so on,Please click here to learn more. https://www.hcgabion.com/product/21.html< , br>

Minimum Order: 1 bags

Hot-dip galvanized steel grating Galvanized steel wire Gabions High-tensile steel wire Distributor gabion cages Hot-dip galvanized steel grating, also known as hot-dip galvanized steel grid , is made of low-carbon steel flat steel and twisted square steel transverse longitudinal welding grid-like building materials. Hot-dip galvanized steel lattice plate has strong impact resistance, strong corrosion resistance and heavy load resistance, elegant and beautiful, in municipal subgrade and steel platform construction engineering has a superior performance. The high cost- performance ratio is the hot-dip galvanized steel grid plate widely used in the new and old subgrade paving ditch road construction project.  protective nets Advantages:  (1) installation is simple and does not require complex installation;  (2) Good ventilation, lighting, heat dissipation, explosion-proof and anti- skid performance;  (3) high strength, light structure, durable;  (4) Easy maintenance and anti-fouling Galvanized wire mesh has many advantages such as installation is simple, good ventilation, lighting, heat dissipation, explosion-proof and anti-skid performance. Hot-Dip galvanized steel grating has many advantages such as installation is simple, good ventilation, lighting, heat dissipation, explosion-proof and anti- skid performance. Haochang main supply gabion, which include gabion box, gabion baskets, gabion walls and gabion mattresses. Our products have high quality and competitive prices,Please click here to learn more. https://www.hcgabion.com/product/22.h , tml

Minimum Order: 1 bags

Stainless Steel SheetThe range of steel sheets which we produce is made of high grade 304 316L 310S 309S 321 347 201 409L 410 420 430 2205 2507 Stainless Steel Sheet, stainless steel 304 Sheet, UNS S30400, AISI 304, ASTM A240 304 Stainless Steel Sheet. With various dimensional specifications, these sheets find wide applications in manufacturing and fabricating engineering products. Designed with high precision these products are tested and checked for dimensional accuracy and optimum performance. tem Stainless Steel Sheet/Plate (Hot rolled, cold rolled) Standard:JIS, AISI, ASTM, GB, DIN, EN, etc Range:0.3mm To 150mm Thickness:0.01~200mm Width:Cut to size,1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Length:2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc Package Standard: export package, suit for all kinds of transport, or as Hardnes:As per ASME A & NACE MR 175 Finish:Hot rolled sheet (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

Minimum Order: 500

Item:stainless steel coil Grade:409L 304 316 Standard:JIS,AiSi,ASTM,GB,DIN,EN Width:0 , .3-14MM Length:as request Place of Origin:China Brand Name：Hong Industry Model Munber:409L 304 316 Technique:Strip band Application:construction Certification: , Mill Test Report or the third party Test(SGS) Tolerance:±1% Processing Service:bending,Welding,Decoiling,Punching,Cutting , Material:SS201/301/304/316

Minimum Order: 500

Description of Tinplate Sheet Tinplate sheet refers to the two sides coated with commercially pure tin cold rolled low carbon sheet or steel strip. Tinplate sheet is the low carbon steel rolled into steel plate, after pickling, cold rolling, electrolytic cleaning annealing, leveling, cutting edge processing, and then after cleaning, electroplating, soft melting, passivation treatment, oiled and cut into tinplate sheet products. As one of the professional tinplate sheet suppliers, HUARO offers high-quality tinplate sheets for sale, come and buy tinplate sheet at HUARO. Use of Tinplate Sheet: Tinplate sheet is widely used. It is mainly used in the production of metal packaging, including canned food, drinks, chemicals, medicine, health, coatings, paint, spray, cosmetics bottle caps. Features of Tinplate Sheet: Tinplate sheet combines the strength and formability of steel with the corrosion resistance, soldering properties and bright appearance of tin in one material. It has the characteristics of corrosion resistance, non-toxic, tasteless, high strength, and good ductility. At the same time, tin plated steel sheet can be highly engineered and it is easy to process. The tinplate sheet also has low pollution to the environment and is easy to recycle. Advantages of Tinplate Sheet: Tinplate sheet has the properties of light-proof, good sealing and tin reduction. After being made into a container, tin on the tinplate sheet will interact with oxygen remaining in the container during filling, reducing the chance of oxidation of food components. Because of these properties, tinplate sheet containers can provide a closed system that is completely insulated from environmental factors except heat. Therefore, when tinplate sheet is used in food packaging materials, it can avoid food to become bad because of light, oxygen, moisture, and avoid food to become weak because of aroma through or by environmental odor through pollution and the stability of food storage is better than other packaging materials, the preservation rate of vitamin C is the highest, the preservation of nutrients is also the best. We are one of the best tinplate steel sheets suppliers,if you want to buy tinplate sheets,electrolytic tinplate sheet,tin coated steel sheet or cold rolled sheet,you can find us. https://www.huaro-shanghai.com/products/tin , plate-sheet.html

Minimum Order: 20 square metres

Description of Tinplate Coil Tinplate is made from the cold-rolled sheet which is electroplated with tin. Tin coatings'function is corrosion resistance to steel substrates and preservation of fast and canned foods. Also, the surface of tinplate is suitable for printing and screen printing. Tinplate coil is widely used in the canning, can ends, larger containers and a range of closed parts packaging industry. Different thickness of tinplate coating can be produced to meet specific requirements. Production Process of Tinplate Coil 1. Charging the Coil: The charged coil is welded to the preceding coil in order to run the facility continuously. 2. Side Trimming: The material is side trimmed to the final width 3. Clean & Pickle: The strip is next electrolytic ally cleaned, pickled, and rinsed by running through a series of tanks to ensure the surface is clean and suitable to accept the electro-deposition of tin. 4. Electroplating: The strip passes through tanks containing tin anodes on either side of the strip and tin electrolyte. 5. Melting Tower (Tin Reflow): The electrolytic tinplate next passes through a melting tower 6. Chemical Treatment: A sodium dichromate solution is next applied to the electrolytic tinplate to create a light protective chromium oxide film. 7. Oiling: The oil is applied to minimize scratching the tin surface in transit and handling. 8. Recoiling: The finished tinplate product finally recoils at the exit end of the electrolytic tin line on a take-up reel that most commonly has a 420mm inside diameter (ID). 9. Quality Inspection: The entire process is monitored automatically and manually to ensure that the material conforms to specification and meets customer expectations. Application of Tinplate Coil The application of tinplate coils is very wide. From the packaging materials for food and beverages to grease cans, chemical cans and other miscellaneous cans, the advantages and characteristics of tinplate provide physical and chemical protection of the contents. If you want to buy cold rolled steel coil,you can find us. https://www.huaro-shanghai.com/products/tin , plate-coil.html

Minimum Order: 20 square metres

Description of Steel Slab Steel slab is a thick flat steel sheet rolled and cooled from the CCM machine, it can be further processed. Includes use in the following sectors: structural steels, shipbuilding, pipes, pressure vessels, boilers, heavy metal structures, offshore structures, etc. The typical thickness of 200 to 240 mm. The maximum width is 1600 mm. The data of chemical contents is C: 0.17-0.195 or 0.165-0.190 Mn: 0.3-0.4 as Q2335B as steel grade for sale. HUARO offers high-quality steel slabs for sale, welcome to consult. Continuous casting slab production process. The molten steel is continuously poured into the water-cooled copper mold. The slab shell is solidified gradually along the periphery of the mold. When the liquid level of the steel rises to a certain height and the shell solidifies to a certain thickness, the cooling water will be sprayed to cool the slab completely, and the slab will be cut to a certain length according to the steel rolling requirements. Features of Steel Slab HUARO (Shanghai) Industrial Co., Ltd. is committed to importing the superior iron and steal resources from different advanced steelmaking countries and areas. All steel slab is made with 100% iron ore or DRI sponge iron, which make sure the high quality of the steel since the EAF furnace and Ladle furnace. All steel slab comply with certain international steelmaking standards include DIN EN JIS ATSM and Chinese GB as well. The specifications of the slab will be 200-250mm as thickness,900-2000mm as width, 6000-11500mm as length. Each standard weight of slab will be 15-25MT. The width tolerances will be plus 20mm/minus 10mm, according to the standard the thickness tolerances will be plus 5mm/minus 5mm, the length tolerances will be plus 100mm/minus 100mm per length. The flatness is 7mm/ meter, Max, camber is 4mm/ meter Max, the squareness is Max.1 % of the width, the concave /convex is 6mm Max and the scarf will be Max.16mm on one side Max.20mm on both sides. Application of Steel Slab Usually, the steel slab will be used in the mill's workshop to produce hot-rolled coils and sheets. Steel slab is the basic material of cold rolled, pickled and galvanized coils and sheet products. It can be sold to the steel mill factory for different purposes. HUARO will supply one million tons of slab to the Chinese market and supply to the high quality required factory and industry sector. Steel Slab Production Process Steel slab is a kind of semi-finished steel. Its processing process is to pass the molten steel from ladle furnace through the mold of continuous casting machine and cut it into various lengths as per customer demands. The slab has a rectangular cross-section and is used as a raw material in the production of flat products (i.e. hot rolled coils or plates). We produce cold rolled steel,RQF today. https://www.huaro-shanghai.com/products/ , steel-slab.html

Minimum Order: 20 square metres

Importance of steel products Steel is one of the oldest metals forged by humans and is still the most reliable and widely used material in manufacturing today. Steel is an alloy of iron, carbon, and other elements, used in automobiles, construction, and dozens of other applications, starting from the iron age 4000 years ago. Steel has a major impact on our daily lives, the cars we drive, the buildings we live in, the workshops we work in, and countless others. Steel is used in our power systems-power line towers, gas pipelines, machine tools, military weapons-the list is endless. Advantages of Steel Products Steel is not only reliable but the preferred material in a huge range of industries. Steel is called "The backbone of modern industry". There's a reason "tough as steel" is a popular analogy: steel constructions provide long-term strength, It provides strong structural integrity, weather resistance, and long-term strength wherever and whenever it is used. Another enormous benefit of steel is that it is 100% recyclable. Steel's unique magnetic properties make it an easy material to recover from the waste stream to be recycled. The properties of steel remain unchanged no matter how many times the steel is recycled. This means much of the steel used has been used before and will be used again, without losing any of its inherent properties along the way. Because steel has such a long life, when we build homes, buildings, and infrastructure projects using steel, we reduce the number of times we have to continue rebuilding the same structures, which limits the raw material production, machinery use, and transportation required by new construction, and further reduces carbon emissions. High-quality Steel Products Provided by HUARO HUARO mainly deals with types of semi-finished steel products, for example, steel slab, steel billet, and bloom HRC and CRC, galvanized steel tinplate steel, etc. If you are a steel rolling mill, or shipbuilding company or household appliances enterprise, or even automotive producer, HUARO can provide you with satisfactory materials. Besides, a series of steelmaking raw materials are also available in our stock. We can provide types of steel products, such as iron ore, iron ore concentrate, steel pellets, direct reduced iron(DRI), hot briquetted iron(HBI), etc., to our customers all over the world. We have steel products list,steel products manufacturing and hot rolled coil,please feel free to contact us. https://www.huaro-shanghai.com/products/ste , el-product/

Minimum Order: 20 square metres

Description and Production procedure of Steel Pellet Pellets are small balls of iron ore used in steel production. They are one of the important sources of iron in the manufacture of steel. Pellet production is the basis of the steel production process. Steel pellets are made from iron ore powder with additives such as limestone, dolomite, olivine and binder bentonite. The addition of these additives and adhesives, in addition to preventing a large amount of gas produced by the evaporation of water from tending to rupture during the initial stage of heating, can also increase the strength of the particles before heating. The mixture is then mixed together in a mixer and fed into a disk or drum to produce coarse particles, usually about 9-16mm. Heat treatment of coarse particles, including drying, preheating, roasting, post-firing and cooling, is performed to obtain high metallurgical resistance and appropriate properties. The original particles are first fed into the hardening machine. Both the direct grate and the grate-kiln dried the particles in the dry zone, then heated the particles to about 800-900°C in the preheating zone, and then hardened at temperatures of about 1200 to 1350°C. The pellet is then cooled to a suitable temperature for transportation to the unloading equipment. Application of Steel Pellet Pellets are widely used in the iron and steel industry. Nothing can replace them. The structure of the iron ore pellets in the blast furnace allows air to flow between the pellets, which reduces the air resistance that passes up the charge layer during smelting. In addition, pellets provide advantages for end users, such as increased productivity of blast furnaces, increased opportunities for iron content in charging, and better environmental performance compared to sintering plants. As there is a global decline in high-grade block minerals, pellets are made from low-grade ores and are therefore relatively inexpensive and suitable for mass production. Their uniform particle size can ensure good permeability of blast furnace charge, and they have high voltage, good reducibility, high cold strength, and easy to transport and storage, not crack. Pellets contain fewer harmful elements, and they can also expand the source of raw materials for iron-making and smelting fuels. Main Content Data of Steel Pellet Chemical Composition Size Physical Property Fe (t):  66 8%Min 8-16mm:  85% Min CCS：300 Kg/ P Min FeO:  0.4% Max Under 8 mm:  5% Max A.1：5% Max SiO2+AL2O3：2.5% Max +16 mm：10。/0 Max Porosity：≥24 P：0.02% Max S：0.01 % Max We have iron ore pellets for sale,sponge iron pellets,iron oxide pellets,iron pellets and hot rolled steel,contact us now. https://www.huaro-shanghai.com/products/st , eel-pellet.html

Minimum Order: 20 square metres

Description of Steel Raw Material Steel is one kind of alloy, made of iron and carbon. The carbon content is usually less than two percent and for manganese, silicon, phosphorus, sulfur, and oxygen， the the content is even smaller. Steel is the most important engineering and building materials in the world. In the steelmaking process, the impurities, such as nitrogen, silicon, phosphorus, sulfur and excess carbon (which is the most important impurities) are removed from the source iron. To produce different grades of steel, some different alloying elements such as manganese, nickel, chromium, carbon, and vanadium need to add. The Steel-making Process There are two main business processes for steelmaking: blast furnace basic oxygen steelmaking (using blast furnace liquid pig iron and scrap as the main feedstock) and electric arc furnace (EAF) steelmaking, which uses scrap or direct reduced iron (DRI) as the main feedstock. Oxygen steelmaking provides fuel mainly through the exothermic properties of the reaction inside the vessel. Instead, in EAF steelmaking, electrical energy is used to melt solid waste and/or DRI materials. In recent years, with more chemical energy introduced into the process, the development of EAF steelmaking technology has approached that of oxygen steelmaking. The main difference between routes is the type of raw material they consume. For the BF-BOF route, it is mainly iron ore, coal, and recycled steel, while the EAF route uses recycled steel and electricity to produce steel. Depending on the configuration of the plant and the availability of recycled steel, other metallic iron sources such as direct reduced iron (DRI) or molten iron can also be used in the EAF route. Depending on the configuration of the plant and the availability of recycled steel, other metallic iron sources such as direct reduced iron (DRI) or molten iron can also be used in the EAF route. The principle of steel-making is to use oxygen or iron oxide to remove the excess carbon and other impurities contained in pig iron into gas or slag under high temperature. HUARO can provide different kinds of steel raw material, like iron ore, iron ore concentrate，HBI (Hot briquetted iron), DRI (Direct Reduced Iron) and steel pellets. We are one of the professional stainless steel raw material suppliers,we provide steel mill raw material,raw material required for steel manufacturing,raw material for steel rolling mill,raw material for steel mills,raw materials used to make steel,basic steel making process,raw materials for steel production and steel billets,RFQ today. https://www.huaro-shanghai.com/products/ , steel-making-raw-material/

Minimum Order: 20 square metres

Description of Steel Bloom Usually, during hot rolling, the bloom is a semi-finished nearly square solid metal form between the ingot and the billet. The cross-section of the slab bloom is usually greater than 225 square centimeters and about 8 to 12 meters long. In the rolling mill, it is broken down into finished products such as bars, beams and sheet piles. In earlier mills, ingots were made from cast ingots (called "nodular iron"), but in modern mills they are made by continuous casting. Production Procedure of Steel Bloom The ingots, still hot sometimes, reach the tram plate mill and billet mill and are placed upright in a soaking pit under the floor by a special crane. Steel bloom are rectangular gas chambers about 5 meters deep, in which four to eight ingots are simultaneously heated to about 1,250°C (2,300°F). The soaking pit is highly computerized and can be used for scheduling, firing rate, heating time (lasting 8 to 18 hours) and rolling programs. After heating, the conveyor carries the hot ingot to a two-high reversing mill, which passes, again and again, turning the roll and roll table over each time the ingot passes. Since each pass reduces the bloom by only about 50mm, 21 passes may be required, including several edges pass, and the bloom stands upright on its edge to obtain a slab bloom billet of 150mm*150mm. We have steel slab,please feel free to contact us. https://www.huaro-shanghai.com/products/ste , el-bloom.html

Minimum Order: 20 square metres

General Introduction of Steel Billet Prime steel billets are the second stage product in steel production. They belong to hot rolling and directly made and formed in the process of steel smelting, belonging to the category of casting semi-finished products. Their final products involve deformed steel rods, wires, and other steel products. As one of the professional steel billets manufacturers, HUARO offers high-quality steel billets for sale. Steel Billets Production Process The steel billets production process consists of three steps. First, prepare scrap iron or sponge iron (DRI). Secondly, scrap iron or sponge iron (DRI) is melted in an electric arc furnace (EAF) and the necessary elements are added to enhance the properties and quality of the steel billets to meet standard quality and customer requirements. Electric arc furnace technology converts electrical energy into heat to melt steel. Compared with most other metal melting methods, the advantages of the arc are clean, energy-saving and controllable melting processes. Finally, the steel is cast into billets. Application of Steel Billets The company's customers use steel billets to make round steel, shaped steel, and coils. These long products are mainly used in small and medium-sized construction projects, such as residential and commercial units, and other general construction projects, including machine tools, auto parts, and large construction projects requiring steel billets for reinforced concrete. High strength and durability, can be used in Bridges, DAMS, highways, and structures that can withstand high compression forces as well as high-rise buildings. Specification for Steel Billets Steel Billets conform to various types of steel and accordingly include JIS DIN ASTM EN and GB standards. The normal thickness is 130 * 130mm and 150 * 150mm, and the length is usually 6m-12m. Both ends will be gas cut and at the end of each blank, the mold number will be stamped or painted. Steel Billet Specification (As per below or as per customer requirement) Chemistry %C %Si %Mn %P %S N(ppm) 0.15~0.25 0.12~0.20 0.60~0.80 0.035max 0.035max 120 max Note: Tramp Elements (Ni + Cr + Cu + Mo) = 0.30% max We are one of the best steel billet suppliers and steel billets manufacturers,we produce steel products,contact us now. https://www.huaro-shanghai.com/products/st , eel-billet.html

Minimum Order: 20 square metres