Iron & Steel

The offered should have finished sizes of 1.80x6.00m, made of galvanized steel razors of 27 – 30mm, having thickness > 0.5mm in a straight distance among them of 40-50mm, width (upper razor and bottom razor plate) approx. 21mm and steel wire of > 2mm thick, having high tensile strength and above 1500MPa. The rhombus shall have approx. 150x300mm sizes. At the connecting points, both vertically and horizontally shall be over covered with staples/clips, according the manufacturer’s instructions. Galvanization The galvanization of all parts of the welded razor mesh, having finished sizes of 1.80x6.00m and rhombus dimensions of 150x300mm shall be ≥210gr/m2. Whenever on the galvanized parts are made any holes / processing, etc., the galvanization should be effected after these are made. Packing Shall be suggested from the supplier, for safety handling and transport arrangements.

Flat razor barbed wire is a new type of razor barbed wire. We presse the single loop razor barbed wire into flat, or press two loops into flat then expand them across. We usually use it together with beenline razor barbed wire to build a defencing wall, or use it alone as a fence. Features of flat razor wire: a new application method of blade razor barbed wire, it is used by flattening a single loop blade razor wire into a plate shape, or flattening two single loop razor wire and then crossing each other and staggering each other. It can be used in combination with straight line razor wire to form a protective wall with the straight line below and the upper flat plate, or only the flat barbed wire can be used to form a protective wall. Flat razor wire has beautiful and practical features, and is mainly suitable for protection and isolation in residential areas, warehouses, animal husbandry plants, farms, mines, prisons, defense centers and other places.

High Temperature Resistance 304 304L 904 904L Stainless Steel Bar Rod Specialized in ppgi steel sheet processing, stocking&distributing, attentive service. 304L 304L stainless steel, also known as ultra-low carbon stainless steel, is a universal stainless steel material, widely used in the production of good comprehensive performance (corrosion resistance and formability) equipment and components. C:≤0.03 , Si :≤1.0 , Mn :≤2.0 , Cr :18.0～20.0 , Ni :9.0～12.0,304 304 stainless steel is a common material in stainless steel with a density of 7.93 g/cm, also known in the industry as 18/8 stainless steel.High temperature resistance 800℃, with the characteristics of good processing performance, high toughness, widely used in the industrial and furniture decoration industry and food and medical industry. Tensile strength b (MPa)≥515-1035 304 stainless steel atlas 304 stainless steel atlas (6 sheets) The yield strength is 0.2 (MPa)≥205 Elongation = 5 (%)≥40 Reduction of area bits of p (%)? Hardness: 201 HBW or less; 92 HRB or less; 210 hv or less Density (20℃, g/cm) : 7.93 Melting point (℃) : 1398~1454 Specific heat capacity (0~100℃, KJ· kg-1k-1) : 0.50 Thermal conductivity (W·m-1· k-1) :(100℃) 16.3, (500℃) 21.5 Linear expansion coefficient (10-6· k-1) :(0~100℃) 17.2, (0~500℃) 18.4 Resistivity (20 ℃, 10-6 Ω m2 / m) : 0.73 Longitudinal modulus of elasticity (20℃, KN/mm2) : 193

Bright polished Cold Drawn Stainless Steel Round Bar 201 201 stainless steel round rod: the cross section is round, no bubble, no pinhole and so on. Product Description: Commodity Bright polished Cold Drawn Stainless Steel Round Bar 201 Grade 201 Technique Cold drawn Certification SGS,BV,IQI,TUV,ISO,etc Diameter 3-400mm Surface bright polished Length 5.8m,6m or customized length Surface Black , bright, Standard JIS,AISI,ASTM,GB,DIN Delivery time About15-30 days or based on the sales contract MOQ 1 TON Advantages the cross section is round, no bubble, no pinhole Usage the production of all kinds of watchcase, watchband cover material

Material: Q235,Q255,Q275,SS400,A36,SM400A,St37- , 2,SA283Gr,S235JR,S235J0,S235J2 Thickness: 0. , 2-500mm,etc Width : 1000-4000mm,etc Length: 2000mm, 2438mm, 3000mm, 3500,6000mm,12000mm,or rolled,etc etc Standard: ASTM,AISI,JIS,GB, DIN,EN Surface: Black painted,PE coated,Galvanized,color coated, anti rust varnished,anti rust oiled,checkered,etc Technique: Cold Rolled, Hot Rolled Certification: ISO, SGS,BV price terms: FOB,CRF,CIF,EXW all acceptable Delivery Detail: inventory About 5-7; custom-made 25-30 Loading port: any port in China Packing: standard export packing (inside:water proof paper,outside:steel covered with strips and pallets) Payment Terms: T/T, L/C at sight,West Union,D/P,D/A,Paypal Container size: 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)

welded gabion mesh introduction: Welded Gabion is made of welded wire mesh panel, it is assembled with a spiral- shaped wire to assemble the front and rear panels, the bottom plate and the partition after welding, and is packed together with the mesh cover. All the caged products that are folded and tied are an independent individual. Welded gabion mesh install: Field installation is quick and easy. With diaphrams and stiffeners installed, the gabion may be filled with standard loading equipment. After filling the gabion, a lid is placed on top and secured with spiral binders, lacing wire or "C" rings. Welded Wire Gabions hold their shape better - they don't bulge out when filled. They are easy to handle, which means more work, less labor and higher productivity on the job. welded gabion mesh applications: 1. Retaining wall structures 2. Prevention of current scour and erosion control 3. Bridge protection 4. Hydraulic structures, dams and culverts 5. Embankment protection 6. Rockfall prevention and soil erosion protection welded gabion mesh cage dimensions: Specification Of Welded Gabion Mesh Gabion size(m) Mesh opening Wire diameter Surface treatment 1×1×1 50 x 50mm 75 x 75mm 80 x 80mm 100 x 100mm 3-6mm Galvanized Galfan PVC coated 2×1×1 3×1×1 0.5×0.5×0.5 1 , ×0.5×0.5 1×1×0.5 2×1×0.5 2×1×1 3×1×1 Generally, stiffener length 300mm, spiral binder wire diameter 2-4mm All sizes can customized according to your request.

The round column is a commonly used supporting column for the double wave corrugated guardrail. The general column specification is 140mm/114mm, the thickness is generally 4.5mm, and the common height is 2150mm. Generally, the length is determined according to the drawings or terrain. The square tube column is a commonly used supporting column for the three-wave guardrail. The specification is 130*130, the thickness is generally 6.0mm, and the common height is 2540mm. Generally, the length is determined according to the drawings or terrain. Delivery time: 15-30days Price term： EXW, FOB, CIF, CFR, CNF, etc. Payment： L/C, T/T, Western Union, etc. Port Delivery： Qingdao, Shanghai, Tianjin, Shenzhen, etc. We can provide customized products in different materials and sizes to meet different needs. Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information. We can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required. The website: https://www.faststeelfactories.com/

Minimum Order: 1 bags

The corrosion resistance of stainless steel wafer mainly depends on its alloy composition and internal structure, the main role is chromium element. Chromium has high chemical stability, forming a passivation film on the surface of the steel, isolating the metal from the outside world, protecting the steel from oxidation and increasing the corrosion resistance of the steel. Product name ASTM A276-05 SS316 BA Cold Rolled Stainless Steel Round Circle Plate For Cooknware Surface 2b ,No.1, No.4,mirror ,8K,polish,ba,bursh... Material 201,202 S , pecification OD:100mm---800mm Thickness:3mm- , --16mm(or as your requirement) Technique Cold Rolled Hot Rolled Standard JIS,AISI,ASTM,DIN,EN,GB. , Application range Decorative,Industry,kitchenware,etc Pa , yment T/T,30% advanced payment before production and balance before shipment.

Stainless Steel material powder metallurgy metal injection molding sintered parts MIM products. How to work with us: 1. Send us 3D drawing (STEP/IGS/SolidWorks format etc. ) 2. Specify the requirements (quantity, material, and surface finish requirements etc) to us via email. Manufacturing range MIM Metal Injection Molding color could be customized Applicable Material stainless steel/titanium/brass/copper etc. Our advantage 1. Rich experience in metal injection molding field. 2. Small order accepted for the beginning 3. New material develop capability. 4. Top quality guaranteed by skilled workers, managing system and status of facilities. 5.100% quality inspection before delivery Surface finsih Natural machined color/anodized finish/ coating / Passivation / PVD finish/nickel white/brush/heat treatment/fine glass beads/grounding/tumbled finish etc. Payment Terms 50% deposit before production and 50% balance before arranging to ship

PPGI is pre-painted galvanized iron, also known as pre-coated steel, zinc coated steel, color coated steel etc., typically with a hot dip zinc coated steel substrate. PPGI is an industrial steel product with multiple uses. It is a form of galvanized iron that is also dipped into zinc. However, the zinc coat is pre-painted in the factory instead of wait until after the steel is formed. Applying a zinc coat prevents rusting. PPGI is also known as metallic coated steels, or pre-coated steel. This product will typically come in the form of a coil. This steel is often not costly and can last for a long period of time. The hot dip metallic coating process is also used to manufacture steel sheet and coil with coatings of aluminium, or alloy coatings of zinc/aluminium, zinc/iron and zinc/aluminium/magnesium which may also be factory pre-painted. While GI may sometimes be used as a collective term for various hot dip metallic coated steels, it more precisely refers only to zinc coated steel. Similarly, PPGI may sometimes be used as a general term for a range of metallic coated steels that have been pre-painted, but more often refers more precisely to pre-painted zinc coated steel. Steel Grade DC51D+Z, DC52D+Z, DC53D+Z, S280GD+Z, S350GD+Z, S550GD+Z, DC51D+AZ, DC52D+AZ, S250GD+AZ, S300GD+AZ, S350GD+AZ, S550GD+AZ, SECC, SECE, BLCE+Z, BLDE+Z, BUSDE+Z or Customer’s Requirement Base Steel Hot dip galvanized steel, Hot dip galvalume steel, Electro galvanized steel Thickness 0.12-3.0mm Width 600-1 , 000mm Surface Color RAL,wood grain pattern, camouflage pattern , stone pattern, matte pattern , high gloss pattern , flower pattern, etc Quality Approved by SGS,ISO Coil Weight 3-20metric ton per coil Package Water proof paper is inner packing,galvanized steel or coated steel sheet is outer packing , side guard plate,then wrapped by seven steel belt.or according to customer's requirement Export market Europe,Africa,Central Asia,Southeast Asia,Middle East,South America,North America, etc Coil Weight 3-8 Tons Spangle Zero.minimum .Regular Big Spangle

302 stainless steel has high strength after cold working, but the elongation is slightly worse than that of 301. It is mostly used for decorative parts for construction. Product Name Stainless Steel Pipe/Tube Out Diameter 6-720mm Or As Required or as required Length 1m-12m, 6m or as required Thickness 0.3-40mm or as required Thickness Tolerance ±0.01mm Technique Hot rolled / cold rolled Standard AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc. Material Origin TISCO BAOSTEEL LISCO BAOXIN ZPSS JISCO Material Grade 201, 202, 301, 302, 303, 304, 304L, 304H, 310S, 316, 316L, 317L, 321,310S 309S, 410, 410S,420, 430, 431, 440A,904L Surface Treatment BA, 2B, 2D, 4K, 6K, 8K, NO.4, HL, SB, Embossed or as required Edge Mill /raw or slit edge Application widely used in high temperature applications, medical devices, building materials, chemistry, agriculture, ship components, petroleum and chemical Industries also applies to food industry and mechanical industries, like beverage packaging, kitchen supplies, trains, aircraft, conveyor belts, vehicles, bolts, nuts, springs, and screen Payment term 1. 30% T/T in advance,the balance before shipment 2. L/C at sight 100% Packing 1.Export sea worthy package + water proof paper + wooden pallet 2.Max Loading 25mt for each 20GP container Delivery time Within 7-10 working days after received 30%T/T of deposit or L/C original MOQ 5 TONS accept sample order(A sample that used to confirm quality is available for free) Quality control Mill Test Certificate is supplied with shipment

The guardrail block is an energy-absorbing layout, so the fence gradually deforms when hit, and then absorbs energy, reducing casualties. After the anti- blocking block is fixed between the column and the corrugated beam and becomes an integral part of the guardrail, the collision force can be distributed over more spans, thereby increasing the overall strength of the guardrail. Delivery time: 1 5-30days Price term： EXW, FOB, CIF, CFR, CNF, etc. Payment： L/C, T/T, Western Union, etc. Port Delivery： Qingdao, Shanghai, Tianjin, Shenzhen, etc. We can provide customized products in different materials and sizes to meet different needs. Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information. We can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required. Learn more details: https://www.faststeelfactories.com/

Minimum Order: 1 bags

Plug grating is a lightweight and durable flat steel structure widely used as building material in civilian and commercial buildings, theaters, metro, suburban railway and construction projects of various public works areas and facilities. The grating is made with carbon steel or stainless steel bars going through the opening (hole), plug, welding and finishing processes, galvanized or stainless steel natural color. Grating length The bearing grating length is the external grating dimension measured in the direction of the bearing rods (this applies even in the case that the grating length is shorter than the width thereof). Grating width The non-bearing grating width is the external grating dimension measured in the direction of the filling rods. Bearing rods The bearing rods are parallel grating chords supported on both ends and used to transmit the forces induced by the grating load. Filling rods The filling rods are chords sized as a rule to 10 x 2 mm maintaining the vertical position and stability of the bearing rods. Mesh size The mesh size is the axial distance between two adjacent bearing rods and two adjacent filling ones. Border band The border band is a steel band used as a border and reinforcement of the peripheral grating area; as a rule, the cross-sectional area of the border band is identical with that of the bearing rod of the grating. Unidirectional Anti-Slip Arrangement Indentations cut out in filling rods creating an effective anti-slip grating arrangement. Bearing structure Supporting structure, as a rule steel or concrete construction, where gratings are anchored. Cut outs Rectangular, oblique and/or bow-shaped apertures in grating structures cut out in accordance with the Customer drawing or sketch. Step sides Staircase step sides made from flat bars and used to screw the step onto the staircase bearing structure (the string boards). Feature: Plug steel grating has lightweight, high strength, corrosion- resistance, it is strong, durable, maintenance-free, beautiful and a great choice for use in both residential and industrial applications.

Compound steel grating is a product made of steel grating with certain crossing style and checkered plate surface in different thicknesses. The grating type JG323/40/100, JG253/30/100 and JG323/60/100 are generally used as base support materials. The checkered steel plate galvanized or hot dipped with 3mm thickness is used as surface plate. Checkered plate is used as surface tread plates with a thickness of 4mm, 5mm or 6mm according to customers’ requirements. Compound steel grating will generate buckling deformation due to thermal stress after hot dip galvanizing, and larger steel grating has difficult levelling due to the fact the panels are two layers of metal sheets combined firmly together.