Insulation, Accessories & Others

Based on the demand for distributed PV grid-tied power generation system and understanding of future development, MICNO solar technology relies on 15 years core inverter and control technology research and application and follows stable, efficient and maintenance-free product design concept to provide high- quality string solar grid-tied. Solar Electric Equipment SOLAR PUMP INVERTER The solar pump inverter converts the DC power of the solar array into AC power, which can drive various pumps and provide clean water for remote areas where power facilities are scarce.Although the solar water pump inverter accounts for a small proportion under the cost of the solar pump system, it is the core equipment of the system. It controls and regulates the operation of the solar pumping system, besides converts the direct current generated by the photovoltaic modules into alternating current that can directly drive the water pump to work. When the light intensity is insufficient or in rainy weather, it can be connected to the mains or oil engine backup power supply mode to drive the system to pump water to meet the needs of users around the clock. The control method of photovoltaic pumping inverter motor is frequency conversion control. As the light intensity increases, the output frequency also gradually increases, and the corresponding pump motor speed will be faster and more SOLAR SYSTEM PARTS MICNO offers customers a wide range of accessories for solar systems, one-stop service, safer and more reliable.A basic solar power generation system consists of solar panels, a charge controller, an inverter, and a battery. The function of the solar panel is to directly convert the solar radiation energy into direct current for use by the load or stored in the battery for future use. Generally according to the needs of users, a number of solar panels are connected in a certain way to form a square array of solar cells, which is then equipped with appropriate brackets and junction boxes. In different types of photovoltaic power generation systems, the charging controllers are different, and their functions and complexity vary greatly. This needs to be determined according to the system requirements and importance. The function of the inverter is to invert the low-voltage DC power provided by the solar cell array and the storage battery to 220 volts AC power for the AC load. The battery STORAGE INVERTERS In remote areas, it is very suitable to establish an independent PV to supply the power to the user.The energy storage inverter is the interface between the power grid and the energy storage device. It can be applied to different occasions (grid-connected system, island system and hybrid system). It has a series of inverters with special functions. Energy storage inverters are a type of grid-connected inverters suitable for smart grid construction. They are used in energy storage and feature two-way inverters as their basic characteristics. They have a series of special features and functions. The energy storage link in the smart grid can effectively regulate power resources, can well balance the difference in power consumption between day and night and different seasons, adjust the remaining shortages, and ensure the security of the power grid. It is an important prerequisite for the application of renewable energy and an effective means to achieve interactive management of the power SOLAR PUMP CONTROLLER MICNO offers customers a high degree of protection control cabinet, including solar pump inverter, AC and DC converter modules, contactors, DC circuit breakers, and other integrated control systems.Controller: Control and adjust the operation of the solar water pump, drive the water pump with electric energy from the solar array, and realize MPPT adjustment according to the change in the intensity of sunlight. A typical photovoltaic off-grid power generation system is mainly composed of six parts: solar modules, supports, solar controllers, off-grid inverters, batteries, and distribution boxes. After the solar modules are connected to the solar controller, they first meet the user's load usage, and then Store the excess power in the battery for night and rainy days. When the battery is empty, most inverters can also support the city power input (or diesel generator) as a supplementary energy to power the load. Shenzhen MICNO Electric Co., Ltd. is a professional solar power equipment manufacturers. MICNO provide inverter combiner box, power electronics soft starter, solar power equipment for sale and etc. Want to know more, please contact us.

Minimum Order: 10 long tons

MICNO inverter combiner box is designed for multi-input tandem photovoltaic power system bus application, set convergence, detection, monitoring and protection into one to achieve a secure, reliable and convenient connection between multiple photovoltaic strings and inverters. The JTPV series string combiner box for solar can be used in conjunction with the iMars inverter to form an overall installation and can be used as a separate installation. Wiring diagram Max. input voltage: DC 1000V (according to user’s requirements) Max. input current: 20A (according to user’s system confguration) Solar panels input route: 6, 8, 10, 12, 14,16, 18, 20 lines (according to user’s requirements) Protection class: IP65 Technical Specifications of Solar DC Combiner Box Technical data 2-32 Strings Combiner Boxes Material PPO/PC/Matel Plastic sprayed surface (EN60529) Degree of protection( according to EN60529) IP67/P65 Exterior Color Black / Off white Max. open circuit DC voltage 1000V DC Max. DC short circuit current per input 20A DC/15A DC Surge protection Device 1000V DC 40KA Number of DC inputs( plus and minus= one input) 2-32 Connection DC input cables(+)to Fuse holder(0.75mm2-25mm2) Connection DC input cables(-)to Fuse holder(0.75mm2-25mm 2) Fuses With Fuse Number of DC outputs( plus and minus= one output) 1 Suitable cable cross section( DC output) 4-150mmsq Max. output circuit breaker current(A) 63A-800A Warranty time 1 year Product Specification Technical data 2-32 Strings Combiner Boxes Material PPO/PC/Matel Plastic sprayed surface (EN60529) Degree of protection( according to EN60529) IP67/P65 Exterior Color Black / Off white Max. open circuit DC voltage 1000V DC Max. DC short circuit current per input 20A DC/15A DC Surge protection Device 1000V DC 40KA Number of DC inputs( plus and minus= one input) 2-32 Connection DC input cables(+)to Fuse holder(0.75mm2-25mm2) Connection DC input cables(-)to Fuse holder(0.75mm2-25mm 2) Fuses With Fuse Number of DC outputs( plus and minus= one output) 1 Suitable cable cross section( DC output) 4-150mmsq Max. output circuit breaker current(A) 63A-800A Warranty time 1 year Shenzhen MICNO Electric Co., Ltd. is a professional soft starter suppliers. MICNO provide inverter combiner box, power electronics soft starter and etc. Want to know dc combiner box price or more, please contact us.

Minimum Order: 10 long tons

MICNO offers a wide range of low voltage, medium voltage, high voltage and wide voltage grade universal, digital intelligent and high start soft start. It adopts world-class technology, flexible application and stable operation which can be widely used in various fields of industrial automation.Motor soft starter is a novel motor control device that integrates motor soft start, soft stop, light load energy saving and multiple protection functions. The motor soft starter uses three opposite parallel thyristors as voltage regulators, which are connected between the power supply and the motor stator. Such a circuit is, for example, a three-phase fully controlled bridge rectifier circuit. When the motor soft starter is used to start the motor, the output voltage of the thyristor gradually increases, and the motor gradually accelerates until the thyristor is fully turned on. The motor works on the mechanical characteristics of the rated voltage to achieve smooth start, reduce the starting c Reversing Soft Starter Suitable for the start-up of squirrel-cage asynchronous motors with voltage class 380V. Widely used in electric power, municipal water supply, mining, mining equipment, pharmaceutical, paper and so on. MEDIUM VOLTAGE SOFT STARTER Suitable for the start-up of electronic soft starter for induction motor with voltage class 690V or 1140V. Widely used in electric power, metallurgy, mining, mining equipment, etc. HIGH VOLTAGE SOFT STARTER A new type of soft start device suitable for squirrel cage asynchronous and synchronous motors. Applicable to the rated voltage of 3-15KV AC started. Widely used in cement manufacturing, petroleum gas, metallurgy, electric power, mining and so on. Shenzhen MICNO Electric Co., Ltd. is a professional soft starter suppliers. MICNO provide soft starter china, power electronics soft starter and etc. Want to know more, please contact us.

Minimum Order: 10 long tons

MICNO Servo System includes servo tracking system and digital servo system, which can provide high performance, high reliability, high quality, and cost- effective products to meet a variety of industrial environments and hydraulic servo actuator system applications and achieve the perfect combination of servo and program.Servo system is an servo motor feedback system that enables the output controlled quantity of an object's position, orientation, state, etc. to follow any change in the input target (or a given value). Servo is mainly positioned by pulses. Basically, it can be understood that when a servo motor receives a pulse, it will rotate the angle corresponding to 1 pulse to achieve displacement. Because the servo motor itself has the function of emitting pulses, the servo motor Rotating an angle will send a corresponding number of pulses. In this way, it responds to the pulses received by the servo motor, or is called a closed loop. In this way, the system will know how many pulses are sent to the se SERVO DRIVE MICNO servo drive includes a universal servo and dedicated servo system to provide high performance, high reliability, high quality, cost-effective products, to meet the needs of a variety of industrial environments and critical systems, to achieve the perfect combination of servo and solution. Shenzhen MICNO Electric Co., Ltd. is a professional solar power equipment manufacturers. MICNO masters the leading synchronization, a synchronization current vector control technology, torque control technology and solar pump driving technology with more than 10 years of experience. MICNO owns 12 domestic offices and overseas sales center, covering more than 80 overseas countries. Especially, the products well sold in the Middle East, Africa, South Asia, Southeast Asia, South America, etc..

Minimum Order: 10 long tons

MICNO servo screw drive includes a universal servo and dedicated servo system to provide high performance, high reliability, high quality, cost-effective products, to meet the needs of a variety of industrial environments and critical systems, to achieve the perfect combination of servo and solution. Shenzhen MICNO Electric Co., Ltd. is a professional solar power equipment manufacturers. MICNO masters the leading synchronization, a synchronization current vector control technology, torque control technology and solar pump driving technology with more than 10 years of experience. MICNO owns 12 domestic offices and overseas sales center, covering more than 80 overseas countries. Especially, the products well sold in the Middle East, Africa, South Asia, Southeast Asia, South America, etc..

Minimum Order: 10 long tons

Polyimide Film Tape Polyimide salivating film is an H-class insulating film with pyromellitic dianhydride 4,4- diaminodiphenyl ether as the main raw material. It has excellent insulation performance and super high temperature resistance, corrosion resistance, tension resistance, radiation resistance and excellent flame retardant performance. Main technical indicators thickness tolerance% ≥ 12 tensile strength longitudinal MPa ≥ 135; Transverse ≥ 115 Elongation at break longitudinal and transverse% ≥ 35 Average value of common frequency electric strength MV / m ≥ 150 Individual value ≥ 100 volume resistivity 220 ℃ Ω. M ≥ 10 * 1010 Hz-623 * 6 * 6 relative permittivity 48-62hz - 305 * 0.4 Specifications and requirements Thickness: 0.025-0.05mm Width (strip cutting): 8-500mm Inner diameter of pipe core: 40,50,76mm Film outer diameter (strip cutting) : = 230mm Number of joints 0.025-0.03 PCS / 1000m = 5 (special requirements) 0.04-0.05 =6 Purpose It is widely used in aerospace and nuclear industry. It can be used in locomotive traction, motor, submersible and all kinds of H-class high temperature resistant motors and electrical appliances used in mining; it can be used as high-temperature cable, electromagnetic wire, etc.; it can be made into composite film, flexible copper plate, flexible printed circuit board, etc.

Minimum Order: 50

Hot melt aluminum foil mylar tape Hot melt aluminum foil Mylar tape Single side hot melt aluminum foil Mylar tape Double sided hot melt aluminum foil Mylar tape Hot melt Mylar tape Color: natural color (silver), blue, gold Thickness: 0.02mm, 0.025mm, 0.03mm, 0.038mm Specification: 500MM*2000M This product has good shielding effect for electromagnetic radiation interference and good performance for grounding electrostatic discharge. At the same time, this product is also used for soldering tin, Parameters: Material: Cu 99.98% Substrate thickness: 0.018mm-0.05mm Adhesive thickness: 0.035mm Colloidal composition: conductive adhesive (heat sensitive acrylic adhesive) Adhesion: 1.5 ~ 1.3kg/25mm Temperature resistance: - 10 ℃ - 120 ℃ Tensile strength: 4.5-4.8kg/mm Elongation: 7-7% - 3-4% remarks: 1. The test condition is room temperature 25 ℃ and relative humidity is below 65 ℃. ASTM-D1000 test results are used 2. When the goods are stored, please keep the indoor dry and ventilated for a long time; 3. The product is mainly used to eliminate electromagnetic interference EMI and isolate the harm of electromagnetic wave to human body. It is mainly used in computer peripheral wire rod, computer display and transformer manufacturer. 4. It is divided into double-sided conduction and single-sided conduction. There are 51mm and 76mm (paper tube or rubber tube) for selection. There are natural colors (silver), blue and gold. Pink and other colors can be produced according to customers' requirements. The width of slitting can be as narrow as 4mm. This specification can be produced in the form of roll or jumbo roll.

Minimum Order: 20 square metres

Kapton Tape Substrate: polyimide film Glue: silicone Thickness: 60 μM Length: 33m Adhesion: 7 Tensile strength: 115 Temperature resistance: 220 ℃ - 260 ℃ Purpose: winding and fixing electrical components, coils, transformers, capacitors, etc.

Minimum Order: 100

Conductive Cloth Tape Polyester Fiber Cloth Tape It is made of high strength polyester fiber cloth coated with gold, silver, copper or nickel, and then coated with high conductivity acrylic pressure-sensitive adhesive. It not only has the high conductivity of gold, silver, copper or nickel, but also has the excellent thin, light and soft properties of fiber cloth. It is easy to cut and durable, forming an EMI material with superior anti electromagnetic interference ability. Therefore, conductive cloth is widely used in many high-order electronic devices with high added value. It is also widely used to make conductive foam to fill the gap of products and prevent electromagnetic wave leakage. In addition, it is also directly wound on notebook computers, LCD TV, LCD / PDP and other data cables to prevent electromagnetic interference, with excellent shielding effect. Application field: anti electromagnetic wave interference for precision instruments, EMI shielding material for computer, conductive foam, anti electromagnetic wave for communication equipment, which can withstand high temperature up to 200 ° C. It is suitable for power supply, high power transistor and heat sink, integrated circuit chip, LCD TV, plasma TV, mobile computer and other equipment, such as tablet computer, mobile phone, notebook computer, instrument, digital camera, etc.

Minimum Order: 100

Long-distance and high-speed cruise More simple operation settings Powerful oil movement support Simple Operation High Precision Product Description T20 commercial quadcopter is a VTOL fixed wing UAV, which adopts hybrid configuration of fixed wing and quadrotor. Based on this special airframe design, vtol fixed wing drone for sale can vertically takeoff and land and have no need for runway, takeoff and land airspace nor catapult. The VTOL drone for sale has the ability of long-distance and high-speed cruise. The industrial flight control and navigation system, which is specially designed for T20 series UAV, ensure the UAV can realize fully-autonomous flight, switch of flight mode and vertically takeoff and land, etc. No need for runway, takeoff and land airspace nor catapult let T20 can operate in complex terrain like mountains, hills and forest, and dense region of buildings, etc. These characteristics enlarge the application of T20 long range fixed wing drones for sale which is an ideal choice of industrial UAV. More simple operation settings Longer flight time More secure detail protection More professional air frame design More powerful oil movement support More advanced integrated configuration Long Voyage: Single-flight 4- 6h, greater than 144km/h Simple Operation: fully auto-magically intelligent section box to adjust the route fixed-point landing, survey data commercial uavs droneswill be safely returned. High Precision: upgrade based on the flight experience in different types of terrain. The final aerial survey data was field verified by Wuhan University professor and the horizontal accuracy was 1: 500. Features of VTOL Long Range Fixed Wing Drone Simple configuration design: Easy to assembly in short time VTOL: No requirement for runway, takeoff and land airspace nor catapult, high efficiency RTK: High positioning accuracy Full automatic operation: Full-automatically controlled by GCS, easy to use High security level: Perfect system monitoring and emergency management Applications of Fixed Wing Survey Drone Heavy task in areas where multi-rotors drones cannot quickly cover Fire inspection tour in jungle area, animal/plant resources survey Complicated environment where fixed wing commercial UAV cannot find a place to take off and landing City emergency surveillance, rapid transit Aerial photography in hilly areas Surface ship pre-warning Specification Type Standard Surveying Extended Power Gasoline & Battery Gasoline & Battery Gasoline & Battery Fuel Tank 4L 4L 6L RTK/ PPK √ √ √ Wingspan 3.2m Fuselage 1.8m MTOW 24.8Kg Payload 2-4Kg Take-off & Landing VTOL Duration 4-6h Max. Speed 40m/s Cruise Speed 25m/s Wind Resistance 12m/s Shenzhen TitanFlying Technology Co., Ltd (TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. TTF has more than 20 years' experience on mechanical processing. Our main product are uamanned aerial vehicle, including professional drones and small selfie drone, as well as DIY components for drones.

Minimum Order: 1 bags

The T1-10L Black Hawk UAV is specially designed for agricultural spraying. It integrates advanced deep customized flight controller, efficient spraying system, portable folding body, and simple professional remote control, providing users with high efficiency, safety, and convenient plant protection. Product Description Agriculture Hawk DroneT1-10L T1 hawk quadcopter drone with camera, specially designed for agricultural spraying, integrated advanced depth customization flight controller, efficient spray system, portable folding fuselage and simple professional remote control to provide users with efficient, safe and convenient plant protection service. Foldable Structure of T1-10L Black Hawk Drone UAV Black hawk drone is easy fold-up design is convenient for delivery, assembling and transportation, without weakening the original structural strength. The fold-up design can decrease 80% of the using space. We have a lot of different frames for your options. And we can also provide customize service to design new frames. Its motor arms fold inward, making the aircraft compact and easy to transport in the trunk of a car. Able to withstand harsh conditions, the T1 series drone's airframe is made of light, yet durable high-strength carbon fiber. High efficient spraying system of hawk quadcopter drone T1 drone black hawk spraying system of the agriculture quadcopter equips a 10L capacity of wave-proof tank, efficient brushless pump, two quick-release sprays and four nozzles. Based on the actual tests, spray width is 4m and operating efficiency is 1.6L/min. The wind-resistant nozzle can decrease pesticides float in the air and economize spraying operations. You can set the spraying range, independent planning the path of changing working lines, also implements the constant situation of height, speed and flow spraying. The function of intelligent spraying flow can be controlled which is associated with the flight speed: the faster the speed, the greater the flow; Speed is lower than 0.5 m/s, pump will shut off independently. It not only ensures the uniformity of spray, but also save agrochemicals. Regional-planning mode of drone black hawk Choose between three flight modes: GPS mode, AB point mode, Manual mode and Auto Operation mode, according to terrain and the specific requirements of each mission. In AB point mode, the flight can be easily planned with the press of a few buttons, without the need for mapping knowledge or other software, making the T1 series drone not only the most efficient but also the easiest to use spraying solution. In GPS Mode, the user can control the drone flying in parallel, forward and backward. It automatically sprays pesticides, which is suitable for operation in the irregular areas. Under Manual mode, the pilot freely navigates the aircraft. User can select the operation area on APP, and set operation distance, flight speed, altitude and other information. T1 will automatically fly back and forth according to the specified distance and traverse the entire area to complete the work, and the land operation is more convenient. Break Point Continue To Spray When detect the following signals such like the secondary battery alarm, low dose alarm, losing ground control signal, one key to return, T1 will automatically shut off the water pump, and make the current point as the continued point to spray. By the function of 'one key to return', UAV can fly to the continued point to restart operation, which ensures the continuous operation of plant protection. Dose Monitor When the dosage is lower than the warning value, the led indicator will flash. It will shut off the pump and record this point as the continued spraying point. Black Box T1-10L Black Hawk Drone UAV provides a black box function, which can record the flight data completely. T1 data recording module can support 100,000 times cycle read and write. The maximum cumulative 32-hour flight data can be recorded. Specification Aircraft Frame  Dimension 1436*1436*550 mm（arm unfolded, without propellers） 710*820*550 mm（arm folded, without propellers） Diagonal Wheelbase 1300 mm Flight Parameters  Total Weight 10.5 kg（without battery）  23.5 kg（with battery, Full Loaded） Standard Take-off Weight 23.5 kg Max Take-off Weight 25 kg Hovering Time 10 min （23.5kg take-off weight）* 25 min （13.5kg take-off weight） * Max Operating Speed 8 m/s * Max Flying Speed 10 m/s * Recommended Operating Temperature -10℃~40℃ Spray System  Liquid Tank Volume 10 L Number of Nozzle 4 Spraying Span 3.5-4m Theoretical Operating Efficiency 200,000㎡/day   (8hs, 6 sets of batteries) Max Spraying Speed 1.6L / min Ground Controller  Max Transmission Range 1000 m  (Unobstructed, Free of Interference)** *The Flight parameters are for reference only. Different natural conditions may affect the actual flight situation. *The Transmission Range may be influenced by varied conditions. Choose open area without high buildings as the flight area. Shenzhen TitanFlying Technology Co., Ltd (TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. TTF has more than 20 years' experience on mechanical processing. Our main product are uamanned aerial vehicle, including professional drones and small selfie drone, as well as DIY components for drones.

Minimum Order: 1 bags

Direct mount propeller or Hub style compatible Multi-length mounting hardware included High Power N42sh magnets Precision NMB bearings Product Description 12v Brushless Motor Series Motor efficiency is typically calculated by dividing thrust by power at 100% throttle, measured in gram/watt. The higher this number is, the more efficient the motor. High thrust drone motors are important to look at efficiency through the whole throttle range though, not just the top end. Some motors might be efficient at lower throttle but could lose efficiency by drawing increasingly higher current as they approach their limits. With less efficient motors not only are you wasting energy and flight time, your batteries might also suffer from voltage sag, this effect will be compounded if you are using poor quality LiPo batteries. Remember that Watt is calculated by multiplying voltage and current, as we know the voltage of the battery we will be using. Another good way to look at efficiency is to use gram/amp (thrust/current). Generally, the more thrust generated, the larger the current drawn to produce that thrust, so uav motor with high thrust and low current are preferred. Inefficient motors either generate too little thrust or draw too much current. If you want your plane to fly longer, we suggest that you consider these motors. U series motors are designed specially for long flight time drones. These motors are highly efficient, light, and run smoothly. With the guarantee of strength, the caps of U motors are highly hollow-cutted to save weight, so that these motors can reach maximum thrust to weight ratio and gain more flight time. U series motors are tested with the strictest procedures of TTF’s QC protocols. Each of these motors are dynamically balanced with our high-test standard. The axial and radial runouts of each rotor are tested strictly Features: • High Power N42sh magnets • Precision NMB bearings • 0.2mm laminations for optimal efficiency • Ample cut to length motor wires for a clean install • Direct mount propeller or Hub style compatible • Multi-length mounting hardware included U2212/ U3506/ U5208 motors are applicable for 300-500mm class multirotor. Specification UAV motor U2212 Model Volts(v) Prop Amps(A) Thrust(gf) Watts(W) Efficiency(G/W) Temperature U2212-800KV 14.8V/4S 9450 2.1 293 31.08 9.43 58℃ 4 476 59.2 8.04 5.6 605 82.88 7.30 7.4 742 109.52 6.78 10.3 918 152.44 6.02 U2212-980KV 11.1V/3S 9450 3.2 300 36 8.45 52℃ 4.5 400 50 8.01 6.1 500 68 7.38 7.8 600 87 6.93 11 780 122 6.39 14.8V/4S 9450 4 470 59.2 7.94 60℃ 8 795 118.4 6.71 12 1010 177.6 5.69 14 1125 207.2 5.43 18 1330 266.4 4.99 UAV motor U3506 Model Volts(V) Prop Amps(A) Thrust(gf) Watts(W) Efficiency(G/W) Temperature U3506-750KV 11.1V/3S 11*4.7 3.1 365 34.41 10.61 30℃ 6.1 575 67.71 8.49 9 730 99.9 7.31 11.6 865 128.76 6.72 14.8V/4S 13*6.5 4.8 565 71.04 7.95 48℃ 9.8 880 145.04 6.07 14.7 1058 217.56 4.86 21 1225 310.8 3.94 26 1475 384.8 3.83 UAV motor U5208 Model Volts(V) Prop Amps(A) Thrust(gf) Watts(W) Efficiency(G/W) Temperature U5208-300KV   22.2V/6S 20prop 10 1800 222 8.11 40℃ 20 2600 444 5.85 23 2750 510 5.38 31 3300 688 4.79 16prop 5 970 111 8.73 43℃ 15 1950 333 5.85 25 2600 555 4.68 35 3000 777 3.86 14.8V/4S 20prop 5 850 74 11.48 52℃ 15 1700 222 7.66 20 2000 296 6.75 27 2400 400 6.01 Shenzhen TitanFlying Technology Co., Ltd (TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. TTF has more than 20 years' experience on mechanical processing. Our main product are uamanned aerial vehicle, including professional drones and small selfie drone, as well as DIY components for drones. We provide fastest drone motors, 12v brushless motor and etc, want to know selfie drone price, please contact us.

Minimum Order: 1 bags

Quality high-temp motor windings 7075 Aluminum alloy Eight-bladed cooling fan Great power Product Description FPV Racing Quad Motors Test fpv racing motors are designed with one thing in mind - maximizing Multi- rotor performance! The new quadcopter racing motors are the new standard performance. These motors are built for a specific type/application allowing for further refinement and efficiency/power to be optimized. Built by the highest quality components from Japan bearings, N45SH magnets, 0.2mm laminations, 180deg oxygen free copper wire, 0.005g balancing, perfect wind laid down and 100% QC, and then the design of racing quad motors are also evaluated for their type application and everything from their mounting, to the prop type adapters are taken into consideration. These motors are truly works of art. Features of Quad Copter Racing Motors : • 7075 Aluminum alloy • High-strength • Quality high-temp motor windings • Japanese bearings • N54 super magnets • Eight-bladed cooling fan • Anti-skid teeth to lock your propeller in place • Great power • Perfect for X frame racing drones These motors are unmatched in quality and value, and the performance speaks for its self. The R1306-2300kv multirotor motor is ideal for small 180~220mm multirotor and 4~5-inch props. The R1806 Motor will have your 150 ~ 200mm multirotor performing better than imagined. The R2205 are perfect for 150 ~ 290mm size quads. They come with a larger 3mm shaft and bigger bearings for motors of this size. R2205 have far less sync errors than other motors making them more responsive to pilot input. They are an excellent companion for 4-6” propellers. Specification Racing motor R1306 Model Volts(V) Prop Amps(A) Thrust(gf) Watts(W) Efficiency(G/W) Temperature R1306-3100kv 7.4V/2S 5030 1.4 70 10.4 6.8 34℃ 3.3 140 24.4 5.7 5.7 220 42.2 5.2 11.1V/3S 5*3 2.1 100 23.3 4.3 45℃ 5.5 210 61.1 3.4 9.4 350 104.3 3.4 Racing motor R1806 Model Volts(V) prop Amps(A) Thrust(gf) Watts(W) Efficiency(G/W) Temperature R1806-2380kv 11.1V/3S 4*4.5 1.9 100 21.1 4.7 37℃ 4.2 200 46.6 4.3 9 340 99.9 3.4 5*4*3 1.3 100 14.4 6.9 3.4 200 37.7 5.3 10.5 460 116.6 3.9 14.8V/4S 4*4.5 2.5 150 37.0 4.1 55℃ 6.3 300 93.2 3.2 13.2 500 195.4 2.6 5*4*3 1.7 150 25.2 6.0 6.5 400 96.2 4.2 15.0 700 222.0 3.2 Racing Drone 2205 Model Volts(V) Prop Amps(A) Thrust(gf) Watts(W) Efficiency(G/W) Temperature R2205-2550kv 11.1V/3S 5*4.5 2.8 200 31.1 6.4 37℃ 5.8 400 64.4 6.2 13.2 570 146.5 3.9 6*4.5 3.1 200 34.4 5.8 40℃ 7.6 400 84.4 4.7 19.1 750 212 3.5 14.8V/4S 5*4.5 4.5 300 66.6 4.5 60℃ 11.9 600 176.1 3.4 19.1 840 282.7 3.0 6*4.5 4.1 4300 60.7 4.9 11.0 600 162.8 3.7 26.2 1020 387.8 2.6 Shenzhen TitanFlying Technology Co., Ltd (TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. TTF has more than 20 years' experience on mechanical processing. Our main product are uamanned aerial vehicle, including professional drones and small selfie drone, as well as DIY components for drones.

Minimum Order: 1 bags

Current and voltage sensors Super-Fast Operating Speed Built-in BEC & OSD Full carbon fiber made Small(er) Size Product Description Best F4 Flight Controller This version of the Flip32 AIO uses improved components and design that will properly limit the voltage to the Mini OSD preventing voltage spike and damage to the OSD. Features of Racing Drone Flight Controller : • STM103 MCU runs Cleanflight firmware • 8PWM output, supports Octocopter • MS5611 Barometer • Only 35x35mm, mount holes 30x30mm • Onboard USB (for config the OSD and FC) • 5V 3A UBEC (2-6S) • OSD hardware, Compatible with MinimOSD/MWOSD/CC3D OSD • Small PDB • Current and voltage sensors • Better OSD Chip used with less power consumption • 2x Software serial, 2x Hardware serial ports Small(er) Size With the incredibly small size, it can be mounted onto the more mini-sized airframe (i.e. 130mm or below) and also features all the functions that regular FC for FPV(s) has. DShot 150/300/600/1200 Modes Supported Besides the regular PWM mode, Oneshot125/Oneshot42/Multishot modes, the latest DShot150/300/600 modes are also supported. Super-Fast Operating Speed The STM32F405 MCU which features the powerful computing capacity and super-fast operating speed can support the PID controller with higher cyclic frequency & the gyro with higher refresh rate. Built-in BEC & OSD The built-in BEC (5V/1.5A) can provide power for various electronic devices; the internal OSD allows users to adjust or set all OSD parameters via the Betaflight/Cleanflight software easily. Betaflight/Cleanflight Firmware Supported The flight controller supports the Betaflight/Cleanflight firmware and allows users to adjust or set various parameters via the Betaflight/Cleanflight software easily. It's more applicable to the FPV flight & racing. Compatible with 4in1 ESC When pairing the Nano Flight Controller F4 with the 4in1 ESC, the wiring & installation can be very simple and easy. Specification Basic Features Compatible with (Multirotors) Hexacopters Multi-rotor Type Quadcopters FC Programming Supported Compatible with (Modes) PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200, Proshot1000 Compatible with (Transmitters) PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL OSD Built-in Voltage Monitoring Supported Current Monitoring Supported External Buzzer Supported LED Control Supported BEC 5V @ 1.5A USB Port MicroUSB Size 27x27mm Weight 3.3g Applications 130&below FPVs Shenzhen TitanFlying Technology Co., Ltd (TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. TTF has more than 20 years' experience on mechanical processing. Our main product are uamanned aerial vehicle, including professional drones and small selfie drone, as well as DIY components for drones. We provide best f4 flight controller, best racing flight controller, best fpv flight controller and etc,want to know more, please contact us.

Minimum Order: 1 bags