Inorganic Salts

Perfect endodontic files This product is composed of three parts: h and k files tip (working part), indicator sheet and handle. Among them: the tip is made of stainless steel or nickel-titanium memory alloy; Indicator is made of silicone rubber; The handle is made of PBT plastic. Rotary Super Gold Files ApplicationDental AreaFunctionEndo TreatmentProduct detailMade of high quality niti alloy,after heat activation treatment becomes golden colorGood flexibility, high quality cutting efficiency. Rotary V-blue Flies The files color endo body adopts unique mirroredS-shaped cross sectionRECIPROC blue is packed sterile and independentOpen for instant use, provide continuousand efficient cutting, and prevent cross infection. Rotary V-flies Length Follow polycrystal NITI Alloy material CNC programClassic silver, gold and blue activationS-shape cross section. Stainless Steel Barbed Broaches (Engine) Used to pull out the endodontium in the root canal treatment. Stainless Steel Barbed Broaches(Hand) Product DetailsWith plastic handle, used for the pulp extirpation therapy of the molar teeth.Made of high medical stainless steel material. Stainless Steel H,K,R Files (Engine) The handle is made of nylon (PA) injection molding; The file rod is made of nickel-titanium alloy or stainless steel.UsageFor clinical dental root canal treatment. Stainless Steel Plugger, Spreader Files (Hand) Made of medical stainless steel or nickel-titanium alloy, used for filling the working part of root canal filling.Implement ISO 0.2 taper international standard, complete model 15-80# to choose from. Stainless Steel K-FLEXOFILE (Hand) This product is composed of three parts: file tip (working part), indicator sheet and handle. Among them: the tip is made of stainless steel or nickel- titanium memory alloy. Stainless Steel H,K,R Files (Hand) MaterialStainless steelLength21mm 25mm 28mm 31mm NiTi Rotary Supper Files (V+-Files) Varitaper(Gold heat activation)Made of high quality niti alloyHigh quality cutting efficiency and fracture resistanceRecommended rotary speed of engine files is 150～350r/min6pcs per pack, available for single for assorted sizes. Deatils of reciprocating files in endodontics Indication: The product is for clinical root canal treatment (manual operation). Storage and transportation conditions: Temperature: 0 ℃ to 40℃ Humidity: 0-93%RH Atmospheric pressure: 76-106kPa Product Maintenance And Maintenance Methods: Immediately after use, soak all appliances in a detergent and disinfecting solution, combined with proteolytic enzymes if conditions permit, to prevent crumbs from filing, use a soft-bristled toothbrush when cleaning. Follow the instructions in the sterilization manual below: The packaging of the file should be removed before sterilization. It should be noted that the file may be slightly bent during packaging due to its special material characteristics, but can be corrected manually. Place the instrument in a file base, bracket, or container to avoid contact with other instruments If the disinfectant solution contains etchant, it is recommended. to wash the appliance before high pressure steam curing Place the toolbox in a sterilizing bag. The prions were sterilized by steam for 6 minutes at 134℃, and the drying time was 20 minutes Put the device in a sterilized package and place it in a dry and clean environment. UMG Advantages of Dental File More than 9years of experience in medical equipment marketing With a full range of products, we are sure that you will find what you need Leading medical equipment industry, we can provide you with the most advanced products Cooperated widely with other enterprises in medical equipment industry over the years, we have accumulated a lot of experience; we will provide more professional and thoughtful service to satisfy the needs of customers. Providing comparative price and high quality products, so far, our company have cooperated with many customers from over 50 countries and gained good reputation at home and abroad What Are Endodontic File Colors? As for the endodontic file colors, normally the standard size 50 is yellow, size 55 is red and size 60 is blue. As what is mentioned above, from standard size 15 to standard size 60, the standard incremental increase in working diameter is 0.05 mm. If you want to know more about teeth supplies, please visit our website. We offer dental instruments for sale, if you have needs, contact us.

Antiviral drugs GS-441524 Fip 1191237-69-0 /192725-17-0/59277-89-3 Product Name GS-441524 CAS NO 1191237-69-0 Molecular Weight 291.26 Density 1.84±0.1 g Molecular Formula C12H13N5O4 Application Antiviral drugs Antiviral Drugs GS-441524 Fip 1191237-69-0 /192725-17-0/59277-89-3 Antiviral Drugs GS-441524 Fip 1191237-69-0 /192725-17-0/59277-89-3 If a cat's immune system is healthy and mature, the white blood cells should fight off an infection or virus, and allow the cat to build up an immune response, or antibodies. Cats who develop FIP have an immune defect or deficiency that causes the white blood cells to replicate, rather than fight, the virus. Essentially, the cats immune system is spreading the virus throughout the cat's body rather than trying to eliminate it. Cats who have no immune response develop wet FIP, while cats who have a partial immune response develop dry FIP. The nucleoside analog GS-441524 is a molecular precursor to a pharmacologically active nucleoside triphosphate molecule. These analogs act as an alternative substrate and RNA-chain terminator of viral RNA dependent RNA polymerase. In layman's terms, GS441 interjects itself into the chain reaction and stops the replication of the virus.

Minimum Order: 1 bags

N-benzylisopro'pylamine can be used as an intermediate in the synthesis of compounds and as a precursor in the production of certain drugs. Due to its similarity to metha'mphetamine in appearance and physical properties, it has been taken into consideration by DEA in recent years. N-benzyl isopro'pylamine and magnesium form amine adducts in tol'uene at room temperature. Bis (cyclopentadienyl) magnesium was prepared and characterized with N- benzyl isopro'pylamine as ligand. It is also used in the synthesis of N- benzyl isopro'pylamine. N- benzyl isopro'pylamine is a common organic base and an important raw material for organic synthesis. It is a common intermediate or drug precursor in pharmaceutical industry N-benzyl isopro'pylamine can be used as an intermediate in the synthesis of pharmaceutical compounds and as a precursor in the manufacture of certain drugs. DEA has recently been considered because of its similarity to metha'mphetamine in appearance and physical properties.

Minimum Order: 1 bags

chemical Protonitazene (hydrochloride) CAS:119276-01-6

SiSiB develops and manufactures a full line of high-quality silicone oil surfactant for formulating polyurethane rigid foams, flexible foams, high resilience foams, shoe sole foams and one component foam. SiSiB develops and manufactures a full line of high-quality silicone surfactants for polyurethane foam. Our silicone oil surfactants products are used for a variety of polyurethane applications: rigid foams, flexible foams, high resilience foams, shoe sole foams, one component foam, etc. SiSiB, a reliable silane manufacturer, is responsive and flexible in formulating and manufacturing to satisfy customers’ unique requirements. Our extensive network of reactors allows us to support our customers from project inception, to scale-up, through commercial success. SiSiB Silicone Surfactant for PU foams are grafted copolymers which consist of a polydimethylsiloxane backbone and polyethylene oxide-co-propylene oxide pendant groups. It is used as surfactants to stabilize the foam cells in the flexible polyurethane foaming process. It increases the compatibility of raw materials, decrease surface tension in polyurethane foam systems, improve emulsification and nucleation, prevent coalescence and stabilize cell membranes. PU Foam Silicone Stabilizer Recommendations ADDSiL™ 11030 ADDSiL™ 11030 surfactant is a non-hydrolysable silicone glycol copolymer for manufacturing of rigid polyurethane foams. It is designed for Pentane and HCFC- 141b blown polyurethane foams, it provides good nucleation and excellent flow ability. ADDSiL™ 11050 ADDSiL™ 11050 surfactant is a non-hydrolysable silicone glycol copolymer for manufacturing of rigid polyurethane foams. It is a general-purpose foam stabilizer used for the production of polyurethane rigid foam plastic, and it is used in both hydrocarbons (cyclopentane), HCFC 141b and high water content foaming system. ADDSiL™ 11060 ADDSiL™ 11060 silicone surfactant is a non-hydrolysable polyether polydimethylsiloxane copolymer. It is mainly used for manufacturing polyester polyurethane and polyether polyurethane rigid foam plastic, and is a foam stabilizer for PIR foaming process. ADDSiL™ 11080 ADDSiL™ 11080 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer. It is an excellent candidate to consider for both continuous and discontinuous applications. It is designed for HFC-365/227 and the mixture blown polyurethane foams; it provides low thermal conductivities. ADDSiL™ 11090 ADDSiL™ 11090 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer. It is designed for HFC-245fa and the mixture blown polyurethane foams; it provides low thermal conductivities. ADDSiL™ 11200 ADDSiL™ 11200 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer. It is designed for iso-cyclopentane blown polyurethane foams; it provides good nucleation and excellent flow ability. ADDSiL™ 11210 ADDSiL™ 11210 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer with high activity. It is designed for HCFC-141b blown polyurethane foams, it provides ideal balance of processing and performance properties. ADDSiL™ 11220 ADDSiL™ 11220 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer with high activity. It is designed for HCFC-141b and cyclopentane blown polyurethane foams; it provides strong nucleation and low thermal conductivity. ADDSiL™ 11280 ADDSiL™ 11280 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer with high activity. It is designed for water and pentane blown polyurethane foams; it provides excellent emulsion stability and voids reduction. ADDSiL™ 11300 ADDSiL™ 11300 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer. It is designed for pentane blown polyurethane foams. ADDSiL™ 11300 provides low thermal conductivities and it is an excellent candidate for insulating appliance and PIR/PUR formulations. ADDSiL™ 11320 ADDSiL™ 11320 surfactant is a non-hydrolysable silicone glycol copolymer for manufacturing of rigid polyurethane foams. It is designed for HCFC-141b and Pentane blown polyurethane foams. ADDSiL™ 11600 ADDSiL™ 11600 surfactant is a non-hydrolysable polyether polydimethylsiloxane copolymer. It is designed for polyurethane foaming system with HFCs/HFOs blowing agent. It is also suitable for some mixture blowing agents like LBA/CP. ADDSiL™ 11630 ADDSiL™ 11630 surfactant is a non-hydrolysable polyether polydimethylsiloxane copolymer. It is designed for rigid polyurethane foaming system with blowing agents like 245 /Cyclopentane /LBA/Ecomate, as well as some mixture blown agents like LBA/CP. ADDSiL™ 11720 ADDSiL™ 11720 surfactant is a non-hydrolytic, isocyanate-compatible foam stabilizer with high activity. It is a copolymer of polysiloxane and polyether which mainly used for the production of polyurethane rigid foam plastic. ADDSiL™ 11800 ADDSiL™ 11800 silicone surfactant is an organosilicone copolymer designed for use in the manufacture of rigid polyurethane foams. It can provide very efficient emulsification in insulation foams, such as in refrigerators and cold storage applications. ADDSiL™ 11820 ADDSiL™ 11820 surfactant is a non-hydrolysable polyether polydimethylsiloxane copolymer. It is designed for polyurethane foaming system with pentane blowing agent. ADDSiL™ 12250 ADDSiL™ 12250 surfactant is a silicone stabilizer. It is designed for cold-cure flexible molded MDI and MDI/TDI polyurethane foams. ADDSiL™ 12360 ADDSiL™ 12360 surfactant is a silicone stabilizer. It is designed for cold-cure flexible molded TDI polyurethane foams. ADDSiL™ 12550 ADDSiL™ 12550 is a silicone surfactants. It is designed for high resilience slabstock foam. It is a versatile and reliable for all formulations predominantly based on TDI 70+. ADDSiL™ 12560 ADDSiL™ 12560 is a moderately active silicone surfactant for regulation and stabilization of the cell structure in high resilience molded polyurethane foams based on based on TDI 50 ~ TDI 70. ADDSiL™ 12850 ADDSiL™ 12850 surfactant is a silicone foam stabilizer. It is designed for cold-cure flexible molded MDI and MDI/TDI polyurethane foams. ADDSiL™ 13288 ADDSiL™ 13288 is a silicone surfactant provide broad latitude in all grades of conventional flexible foams, including those of very low density where high loading with auxiliary blowing agents act to...

Minimum Order: 1 bags

POWSIL-59223 is an innovative textile softener, especially designed to deliver a hydrophilic, voluminous and silky natural hand feel to most types of fabrics at lower use level than traditional silicone softeners. It provides fast & consistent hydrophilicity and high ability of fabric to rapidly absorb & retain liquid water of water absorption to most types of textile fiber or silicone fabric, especially for terry towel, which cannot be obtained with traditional silicone or fatty acid based softeners. It is very stable in ordinary textile finish process without causing oil-spots on fabric. Technical Data Property Value Physical Form Liquid state Appearance Clear, pale & yellowish Solid Contents (wt%) 55.0-58.0 Viscosity (25°C, cps) <1000 pH (25°C) 4.0-6.0 Flash Point(°C, Open) >100 Diluents Water Gravity(25°C) 0.993 Ionic Slightly cationic Application POWSIL-59223 Hydrophilic Silicone Softener can be readily diluted with water into any grades wihout additional emulsifying process. Micro-emulsion for 30.0% of POWSIL-59223 Formulation: POWSIL-59223: 30% Water: 70% Procedures: Charge water into a tank and start to stir; Add POWSIL-59223 gradually under stirring; Continue to stir for 5-10 min after all addition; Clear micro-emulsion will be obtained at end of this procedure. POWSIL-59223 can be used as received or pre-diluted with water before applying. Optimum treatments are dependent on the required softness of the fabric and yarn after dyeing and finishing. Pad-dry-cure process Dosage: 10~20g/L for light fabric or 25-50g/L for heavy fabric pH: 5.0 ~ 7.0 Temp.: Ambient temperature Dry/Cure: 120-170 ºC for1-3min Exhaustion process Dosage:   1.0-2.0% (o.w.f.) on light fabric & 2.5-5.0% on heavy fabric like terry towel Liquor ratio: 1/10-1/20 pH: 5.0 -7.0 Temp.: Ambient temperature Time: 10-30 min Spinning & Drying: 100 ~ 170 ºC for 1-3 min Garment washing process Dosage: 1.0 -3.0% on the weight of garment Temp.: Ambient temperature Time: 30 ~ 60 min Spinning & Drying: 100-130 ºC for 3-5 min Stripping: POWSIL-59223 by SiSiB can be stripped off fabric. The stripping formulation is as follows: NaOH:   5g/L LABS (30%): 2-5% Add water and NaOH onto fabric tank and then heat to 100°C for 60 min. Then rinse fabric with acidic water and water. Packing and Storage To ensure that the product quality is maintained, the container should be tightly sealed when not in use. It should be stored at normal room temperature, preventing prolonged exposure to extreme heat and cold conditions, which may cause product separation. POWSIL-59223 tends to be sediment on bottom during storage period. If the product is separated, stir the contents to homogeneous. If the product is frozen, thaw it at warm condition and stir after thawed. As a silicone producer, we will offer high quality products to you.

Minimum Order: 1 bags

POWSIL-50502 is a high concentrated hydrophilic softener for textile. It is an epoxy-modified organic silane China emulsion, giving fabrics sio2 hydrophilic, soft and anti-static properties. Technical Data Property Value Physical Form Liquid state Appearance Clear, pale & yellowish Solid Contents (wt%) Min. 95.0 Viscosity (25°C, cps) <2300 pH (25°C) 6.0-8.0 Flash Point(°C, Open) >100 Gravity(25°C) 0.89-1.089 Ionic Nonionic Application POWSIL-50502 hydrophilic silicone softener for textiles can be used for cotton, flax and polyester fabrics. 1. Pad-dry-cure process Dosage: 3~8g/L (the original emulsion) Residual water proportion: 65 ~ 85 Dry/Cure: 160 ºC for1-2min 2. Exhaustion process Dosage: 0.3-0.8% (o.w.f) Liquor ratio: 1/10-1/20 Temp.: Ambient temperature Time: 15-30 min Spinning & Drying: 160 ºC for 1-2 min 3. Garment washing process Dosage: 0.3-0.8% (o.w.f) Liquor ratio: 1/10-1/20 Temp.: Ambient temperature Time: 15 ~ 30 min Spinning & Drying: 160 ºC for 1-2 min Packing and Storage POWSIL-50502 for silicone coated fabric tends to be sediment on bottom during storage period. If the product is separated, stir the contents to homogeneous. If the product is frozen, thaw it at warm condition and stir after thawed. To ensure that the product quality is maintained, the container should be tightly sealed when not in use. It should be stored at normal room temperature, preventing prolonged exposure to extreme heat and cold conditions, which may cause product separation. Sisib silane, established in 1989, is one of the leading manufacturers in silicone industry, focusing on the development and manufacture of silanes and silicones.

Minimum Order: 1 bags

At here, we mainly sell the following products: spindle motors, inverters, stepper motors, hybrid servo motors, drives, guide rails, sliders, gear boxes, racks, water chillers, reducers, acrylic flame polishing machine, cnc router parts, transformers, power supply, vacuum cleaner, dust hood, tool sensor, limit sensor, lubricant oil pump, linear automatic tool changer with cutters, round automatic tool changer with cutters, cylinder, cable chain towline, engraving cutters, control cabinet, vacuum suction table and so on. There are 6,651 kinds of cnc parts china in stock, and they can be delivered right to you after your payment. product name: ER collect nut product brand: HYCNC Nut model: Type A / UM type, ordinary type / balanced type Product Specifications: ER11-ER32 product material: 42cr Accuracy range: Not more than 0.003 Product hardness: 38-42 degrees Range of use: ER type tool holder, tool holder, etc. Features of ER Nut Suitable for ER type shank, cutter bar, and extension bar nut. Clamping tools such as drill bit, boring cutter, engraving knife, reamer, etc., the clamping force is super strong, not loose or deformed. Types of ER Nut ER25 nut ER32 nut Related CNC Parts Related articles Troubleshooting of CNC Servo Driver 1. Introduction of CNC servo driverModern CNC machine tools take CNC servo drivers as the mainstream, including CNC servo drivers and servo motors.

Minimum Order: 1 bags

Engine Bottom Shell Partial Aluminum Mold Casting of Engine Bottom Shell COSMOPlat, aluminum stamping companies, is wholly owned by Haier Industry which is a world-leading provider of solutions to better life. As the world’s first and only IoT ecosystem brand, Haier has been included on the list of BrandZ™ Top 100 Most Valuable Global Brands for two consecutive years. Haier offers services for over 1 billion families in 160 countries or regions around the world. COSMOPlat, mould manufacturers, is a Mass customization platform which can help worldwide customers customize almost whatever industrial products by its’ global registered supply chain dynamically updates every minute in the form of ecological system. COSMOPlat industrial Internet platform is always adhering to the mission of creating and sharing values for both customers and suppliers, and leading the global industrial Internet ecological brand. We provide aluminum stamping service.

Minimum Order: 1 bags

Xiajing E-Commerce & EXPORT CO., LIMITED Add :NO46TaiheGarden,HuLiDistrict,XiaMen City,China QQ :2392596973 Post Code : 361000 Email : kim_jhd1688@163.com zona8500@163.com sarahjl , d1688@163.com Whats:15759861556 ====SIEMENS related sales models ==== 6ES7195-0BA32-0XA0 6ES7195-0BB00-0XA0 6ES7195-0BB10-0XA0 6ES7195-0BB20-0XA0 6ES7 , 195-0BC00-0XA0 6ES7195-0BC01-0XA0 6ES7195-0B , C10-0XA0 6ES7195-0BC11-0XA0 6ES7195-0BC20-0X , A0 6ES7195-0BC21-0XA0 6ES7195-0BC30-0XA0 , 6ES7195-0BC31-0XA0 6ES7195-0BD02-0XA0 6ES719 , 5-0BD04-0XA0 6ES7195-0BD12-0XA0 6ES7195-0BD1 , 4-0XA0 6ES7195-0BD23-0XA0 6ES7195-0BD24-0XA0 , 6ES7195-0BD33-0XA0 6ES7195-0BD34-0XA0 6E , S7195-0BE01-0XA0 6ES7195-0BE02-0XA0 6ES7195- , 0BE11-0XA0 6ES7195-0BE12-0XA0 6ES7195-0BE21- , 0XA0 6ES7195-0BE22-0XA0 6ES7195-0BE31-0XA0 6ES7195-0BE32-0XA0 6ES7195-0BF00-0XA0 6ES7 , 195-0BF01-0XA0 6ES7195-0BF10-0XA0 6ES7195-0B , F11-0XA0 6ES7195-0BF20-0XA0 Xiajing E-Commerce & EXPORT CO., LIMITED Add :NO46TaiheGarden,HuLiDistrict,XiaMen City,China QQ :2392596973 Post Code : 361000 Email : kim_jhd1688@163.com zona8500@163.com sarahjl , d1688@163.com Whats:15759861556

Minimum Order: 1 bags

Polyaluminium Chloride (PAC) PAC Solid professional polyaluminium chloride manufacturer for drinking water treatment Cas No.: 1327-41-9 Molecular formula: [Al2(OH)nCL6-n]m  Appearance: Light Yellow Granule or Powder ITEMS PRODUCT GRADE Potable Water Grade Industrial Grade Content %≥ 28-32% 25-28% Basicity % 40-90 40-90 PH 3.5-5.0 3.5-5.0 Water insoluble matter%≤ 1.0 1.0 Product Description: Poly Aluminium Chloride is an inorganic high- molecular polymer with gelling property. It could be used as cementing material in fireproofing material, Ultrapure alumina products, refractory concrete etc. Application:Poly Aluminium Chloride is an flocculant mainly used in the purifying of drinking water. It is also used in the special water treatment, such as removal of iron, cadmium, fluorine, radioactive pollutant, oil slick etc. It could also be used in industrial waste water treatment, such as the waste water treatment of dying industry. It is also widely used in the foundry industry, paper making industry, pharmaceutical industry, leather industry etc.

Aluminum Chloride Aluminum Chloride Anhydrous Aluminium trichloride,AlCl3 Cas No.: 7446-70-0 Molecular formula: AlCl3  Appearance: Light Yellow Granule or Powder ITEMS PREMIUM GRADE FIRST GRADE Content w/%≥ 99.0 98.5 Fe   w/ %≤ 0.04 0.08 Water insolubel w/%≤ 0.05 0.30 Heavy Metal  w/%≤ 0.006 0.04 Free aluminum w/%≤ 0.010 —— Product Description: White or light yellow granule or powder, relative density  2.44(25℃),  Melting Point 190℃(253KPa),incombustible, easily soluble in water, soluble in ethyl alcohol, chloroform, carbon tetrachloride. Slightly soluble  in  Benzene.  Strong water absorbing ability. Extremely easy to deliquesce. When exposing to the air, it could easily absorb  the water and is hydrolyzed to hydrogen chloride. Strong causticity. Form complex compound with many inorganic or organic compound. And the formed products are all easy to decompose.

Silica Gel (Type B) :: USE :: Mainly used as liquid adsorbents, drier and perfume carriers,also may be used as catalyst carriers, cat litter etc. :: Character :: 1.Shape: pellets or lumps. 2.Color: milky white, transparent or translucent. 3.Pore volume: 0.60-0.85 ml/g. 4.Average pore diameter: 4.5-7.0 nm Specific. 5.Surface area: 450-650 m/g. 6.Structure lying between macro-pored and fine-pored silica gels. :: Technical data :: ITEM Specification Typical values(2--5mm) Adsorption capacity% RH=20%, % = 5.0 6.0 RH=50%, % = 13.0 16.0 RH=90%, % = 70.0 74 Loss on heating, % = 2.0 1.2 Specific resistance, ( .cm) = 5000 12000 PH 5.5--7.5 6.8 Bulk density g/L 500--600 510 :: Size :: 0.5-1.5mm, 0.5-1mm, 2-4mm, 2-5mm, 4-8mm. :: Packaging :: net 25 kg per bag or 500 kg per bag. :: Remarks :: Moisture content, packing style and required size range may be customized as per your specific requirements. 

Minimum Order: 1 bags

Blue Silica Gel Home > Blue Silica Gel :: Characteristics :: Shape:glass-like pellets or lumps. Color: blue or light blue. Including blue gel indicator, chromotropic silica gel and blue silica gel. Turning from blue to red after absorbing moistures. :: Use :: 1. Mainly used for absorbing moisture, anti-rusting of instruments, gauges and equipment in the enclosed conditions. After absorbing moisture, it turns from blue to red, visually indicating the relative humidity of the given environments. 2. When being used with ordinary silica gel or drier,it indicates to which extent the drier absorbs the moisture and judges the relative humidity of a given environment. It is widely used as silica gel drier for the packing of precision instruments, leathers, shoes, clothes, foodstuffs, medicines and household electric appliances, etc. :: Technical Data :: ITEM Blue gel indicator Discoloring silica ge Blue silica gel Typical values Adsorption capacity % RH=20% 8.0 -- -- 8.5 RH=35% 13.0 -- -- 13.6 RH=50% 20.0 20.0 18.0 22.5 RH=90% -- -- 28.0 31.4 Rattler Loss % 10.0 10.0 10.0 0.5 Qualified size ratio % 96 9.0 9.0 97 Loss on heating % 5.0 5.0 5.0 0.9 Colour RH=20% blue or light blue -- -- * RH=35% purple or purplish red -- -- * RH=50% light red lightred light purple or light red * :: Size :: 1-3mm, 2-5mm, 4-8mm :: Packing :: 25 kg per compound bag or 170 kg per drum. :: Note :: Packing and size may be customized per your specific requirements.

Minimum Order: 1 bags