Industrial Machinery & Equipment - Others

Komatsu excavator accessories PC200/220/240-8 rotary pump parts 706-7G- 001170/706-7G-03130 Product name Part number CYLINDER BLOCK 706-7G-41310 VALVE PLATE 706-7G-41720 PISTON 706-7G-41410 RETAINER PLATE CENTER PIN 706-7G-41320 DRIVE SHAFT 706-7G-41630

A thin and small volume of VFD 1) PCB and PCBA based on 15 years of experience, new design.Using 4 layer precision PCB board, using new generation IGBT module technology, high junction temperature, high power density. Use IC integrated electronic components as much as possible, and use the SMC patch process. Minimize the use of plug-in electronic materials. 2) At the same time, the independent air duct is designed as the core of the tooling structure to improve the product's stability and life. The tooling structure is simple and easy to disassemble and install, thus reducing the quality risk in the process of production and assembly. 3) Based on the development strength of the above core, the volume of the converter can be greatly reduced. The reduction of the volume is conducive to the reasonable distribution of the space of the electric box, making the layout of the whole electric box more relaxed and relaxed, to avoid crowding. In a sense, it can also reduce the overall temperature rise of the electrical cabinet, which has a positive effect on the service life of the equipment.

CNC hoop bending machine can be used for one-time forming of stirrups, hooks, and special-shaped parts. It can automatically complete the straightening, sizing, bending, cutting and counting functions of rebar and round steel. The equipment uses a numerical control system, and controls the servo system through a touch screen and PLC. The finished stirrup has high processing accuracy, stable and reliable quality, and has strong graphic storage capabilities. It can save a lot of labor and waste. Improving processing efficiency is an indispensable part of modern construction buildings, and it is also an intelligent equipment that meets national standards.

An essential addition to any kitchen, this sink & drainer is made from sturdy stainless steel. It has 1 bowl, a right hand drainer and 2 tap holes, ready for you to add the taps of your choice. Fittings & fixings included Comes with Sealing strip & fixing clips provided Minimum cabinet width: 500 mm Internal dimensions: (L) 720 x (W) 450 x (D) 210 mm Other parts/packs required - Pack space saver waste, overflow and plumbing kit required, sold separately Features and benefits Stainless Steel sinks are practical, durable and easy to maintain with the stresses of everyday use. They are highly resistant to chipping and cracking whilst looking stylish in your kitchen Suitable for a minimum base cabinet size of 50 cm Caring for your sink– Minor surface scratches are completely normal due to the natural properties of stainless steel. Cleaning regularly with normal detergent and warm water and buffing with a soft cloth will help give your steel sink an even sheen and prevent build-up of limescale. Stainless steel is designed to be low maintenance so there’s no need for harsh chemicals or abrasive materials

Application: This machine is suitable for MDF/CHIP Board/MLB(Multi laminating board)/PVC foam board… surface coverd with decorative sheet or coil. Two Coating Laminating Models Basic Board:MLB(Multi laminating board)/PVC foam board /MDF/CHIP Board Face Materials: 1. Sheet model:PVC/PET/Acrylic 2. Film continue model:PVC/PET film Main Material:Steel welding/Aluminum/A3 Steel plate/Rubber roller/steel roller/Cylinder Keywords:PUR Glue//Hot-melt Glue/Pasting,Laminating,Coating Machine/ PVC/ PET/ Acrylic/ Aluminium Driven type:Electric Condition:New Machine Color:Customizable Automatic grade:Semi-Automatic,Customizable Automatic After-sales service provided: Engineers available to service machinery overseas,Video technical support,Online support Voltage:380V/50HZ(Or other industrial demand voltage, but the delivery time needs to be increased by 10 working days)

The company, with a complete system for R&D, design, manufacturing, marketing, and maintenance service, focuses on the development of the electrical power transmission equipment in the industrial automation area, including integrated VFD motor, special converter, special high-performance VFD motor, power control equipment, and power supply products. The asynchronous integrated VFD motor and the permanent magnetic integrated synchronous VFD motor, as the core products of CCS, organically integrate the frequency converter and the motor, which can replace the separated transmission type of “converter+motor”, obtaining the market-leading position in the high-end transmission equipment of minging industries of coal and oil&gas. High Ingress Protection VFD Motor High Ingress Protection VFD motor is mainly used in excavators in the field of construction machinery, port bucket wheel stacker-reclaimer, and electric drive fracturing complete sets of equipment matched with fracturing skids and sand mixers in oil well sites. The company's series of products have AC and DC, of which AC power supply products adopt AC power supply and adopt integrated design, with small volume, compact structure, saving installation space, high efficiency and energy saving, and are mainly used in construction machinery, ports and other fields; DC power supply products adopt DC power supply, inverter part, and motor part are combined into a whole, with high protection level. This kind of VFD compatible motor is mainly used in oil well sites and other fields. Specifications of the High Ingress Protection VFD Motor Model Power（kW） Voltage（V） Current（A） Speed（r/min） Insulation Ingress protection YKVFT-450-6 400 600 450 580 H IP44 YKVFT-450-6 500 600 565 690 H IP44 YKVFT-630-6 1200 600 1337 580 H IP44 YVFT-500-6 1500 600 1750 750 H IP44 YKVFT-355-4 315 600 354 2200 H IP54 YKVFT-315M-4 110 380 200 1485 H IP44 YVFT-315M-4 132 380 260 1490 H IP44 YKVFT-315L2-4 200 380 355 1490 H IP54 YKVFT-315L3-4 280 380 500 1480 H IP54 YKVFT-355L-4 315 380 600 1800 H IP54 YKVFT-450-6 400 450 807 1000 H IP44 Features of the High Ingress Protection VFD Motor Optional AC or DC power supply Compact structure for space saving High VFD motor efficiency and energy saving High protection Application of the High Ingress Protection VFD in Motor Applications on electric frac spread for oil &gas and contruction equipment such as excavators,bucket wheel stacker.

The company, with a complete system for R&D, design, manufacturing, marketing, and maintenance service, focuses on the development of the electrical power transmission equipment in the industrial automation area, including integrated VFD motor, special converter, special high-performance VFD motor, power control equipment, and power supply products. The asynchronous integrated VFD motor and the permanent magnetic integrated synchronous VFD motor, as the core products of CCS, organically integrate the frequency converter and the motor, which can replace the separated transmission type of “converter+motor”, obtaining the market-leading position in the high-end transmission equipment of minging industries of coal and oil&gas. High Ingress Motor We can supply high ingress protection motors for excavators, bucket wheel stackers, reclaimers at ports, and fracturing machinery for oil and gas. Features of the High Ingress Motor High insulation performance and large starting torque; Small size and light weight; Long service life.

The company, with a complete system for R&D, design, manufacturing, marketing, and maintenance service, focuses on the development of the electrical power transmission equipment in the industrial automation area, including integrated VFD motor, special converter, special high-performance VFD motor, power control equipment, and power supply products. The asynchronous integrated VFD motor and the permanent magnetic integrated synchronous VFD motor, as the core products of CCS, organically integrate the frequency converter and the motor, which can replace the separated transmission type of “converter+motor”, obtaining the market-leading position in the high-end transmission equipment of minging industries of coal and oil&gas. The frequency converter is also called voltage and frequency converter. CCS has mastered the most advanced frequency conversion speed regulation technology. We can provide customers with high ingress protection converter, high ingress protection transformation converter, and explosion-proof variable frequency converters, which are widely used in special environments such as oil and gas, chemical industry, and coal mines. The VFD frequency cRonverter has the characteristics of high reliability, high protection, and high efficiency, and meets the needs of customized frequency converters. Frequency Converter Application 1. Voltage and Frequency Converter for Cooling Tower: The use of a voltage and frequency converter on a cooling tower fan is the most useful means to control leaving water temperature on critical process water applications. Frequency Converter can help save energy and reduce the noise of cooling tower in non- peak periods and benefit the life of the frequency converter components with fewer starts, smoother starts, and built-in motor diagnostics. 2. Voltage and Frequency Converter in Mining Applications: Voltage and frequency converter are now finding wide use in mining applications. 3. Voltage and Frequency Converter for Water Pumps: The installation of voltage and frequency converter on water pumps can be an effective energy saving measurement. Voltage and frequency converter can be installed on all water pumps, including those associated with HVAC systems. Benefits of Using Frequency Converters 1. Speed regulation and saving energy, which can save energy by lowering the motor speed when it is not necessary to run at full speed. 2. Soft start can be used to prolong the service life of the voltage and frequency converter. 3. The motor control system is simplified. 4. Reduce mechanical wear and loss. How does A Frequency Converter Work? The electric frequency converter mainly adopts AC-DC-AC mode, which first converts the power frequency AC power supply into DC power supply through the rectifier, and then converts the DC power supply into AC power supply with controllable frequency and voltage to supply the motor. The voltage and frequency converter converts a basic fixed-frequency, fixed voltage sine-wave power (line power) to a variable-frequency, variable-voltage output used to control speed of induction motors. Frequency Converter VS VFD 1.Power Supply: VFD is composed of AC-DC- AC (modulation wave) circuits. Voltage and frequency change proportionally at the same time and can not be adjusted separately, which does not meet the requirements of the AC power supply. In principle, it can not be used for power supply, and VFD is generally used for speed regulation of three phase asynchronous motor. The whole circuit of frequency converter consists of AC-DC-AC-Filter Circuit, so the output voltage and current waveform are pure sinusoidal, which is very close to the ideal AC power supply. Voltage and frequency converter can output the power grid voltage and frequency of any country in the world. 2.Load Test: VFD(variable frequency drive motor) can't use in load tests because of high vibration and electromagnetic noise, large temperature rise, and the instruments can't work normally. So the voltage to frequency converter that can provide a pure sine wave output becomes indispensable power equipment in the laboratory. 3. Converter: A VFD is not a typical converter though it has conversions inside it. A voltage frequency converter would typically convert a DC signal to an AC signal.

The company, with a complete system for R&D, design, manufacturing, marketing, and maintenance service, focuses on the development of the electrical power transmission equipment in the industrial automation area, including integrated VFD motor, special converter, special high-performance VFD motor, power control equipment, and power supply products. The asynchronous integrated VFD motor and the permanent magnetic integrated synchronous VFD motor, as the core products of CCS, organically integrate the frequency converter and the motor, which can replace the separated transmission type of “converter+motor”, obtaining the market-leading position in the high-end transmission equipment of minging industries of coal and oil&gas. Flameproof Permanent Magnet Motorized Pulley Flameproof Permanent Magnet Motorized Pulley is a further development of permanent magnet direct drive system, which integrates permanent magnet synchronous frequency conversion motor with belt conveyor drive drum and truly realizes mechatronics. The VFD compatible motor not only inherits the advantages of a permanent magnet direct drive system, but also has the characteristics of further eliminating low-speed coupling, occupying very little space, convenient installation, and construction, etc.. Features of the Flameproof Permanent Magnet AC Synchronous Motor Pulley The outer rotor structure has no reducer mechanism inside, the permanent magnet synchronous electric roller shaft is stationary and the outer rotor rotates when working; The outer rotor permanent magnet is embedded and installed, which effectively protects the permanent magnet, has no risk of falling off, and has high reliability; The low-speed coupling is omitted, and the transmission efficiency is higher; Ceramic encapsulation, good wear resistance. Application of the HP Explosion Proof Permanent Magnet Motorized Pulley Application on belt conveyors.

The company, with a complete system for R&D, design, manufacturing, marketing, and maintenance service, focuses on the development of the electrical power transmission equipment in the industrial automation area, including integrated VFD motor, special converter, special high-performance VFD motor, power control equipment, and power supply products. The asynchronous integrated VFD motor and the permanent magnetic integrated synchronous VFD motor, as the core products of CCS, organically integrate the frequency converter and the motor, which can replace the separated transmission type of “converter+motor”, obtaining the market-leading position in the high-end transmission equipment of minging industries of coal and oil&gas. Flame Proof Asynchronous VFD Motor The VFD motor can run in hazardous environments, such as Coal companies and chemical plants. Flameproof and intrinsically safe high-voltage integrated VFD Motor is a highly integrated product of the motor and the drive. It is widely applicable to belt conveyors, loaders, AFC's, emulsion pumping stations, and other equipment used in underground coal mining that matches with the motor and has the same size, to achieve a soft start under heavy load and dynamic speed control. We can provide all kinds of explosion-proof certification according to the needs of customers in different countries. Specifications of the Flame Proof Asynchronous VFD Electric Motor Voltage range 380V/400V/600V/660V/3300V/4160V/6000V/6600V/10000V , Frequency 50Hz/60HZ Voltage fluctuation range at grid -15%-10% Frequency fluctuation at grid ±0.2Hz Speed range 0-2200rpm Output frequency 0-120Hz Power rating 45kW-2000kW VFD principle Voltage source inverter Motor type Asynchronous motor Control method V/F or DTC without sensor Starting torque 2 times Frequency resolution 0.01Hz Ingress protection IP54 pr IP55 Installation IMB3 or IMB5 Communication CAN、RS485、Profinet、Ethernet IP etc Features of the Flame Proof Asynchronous VFD Motor Small impact to the grid and the the machinery Less maintenance cost Improve VFD motor efficiency Space saving Anti-interference Applications of the Flame Proof Asynchronous VFD Motor Our manufacturing programme for induction asynchronous squirrel-cage motors includes motors used, among others, for: belt and armoured conveyors longwall shearers and roadheaders pumps fans plow systems

CCS products are mainly oriented to coal mine, petrochemical, shipbuilding, metallurgy, electric power, large loading test bench and other fields. The electrical power transmission and control equipment have the characteristics of high protection, high efficiency, safety, environmental protection and energy saving. The electrical control devices integrates motor, frequency conversion control, system control and data transmission, and can provide customized products and solutions according to customer needs. CCS's is a power control equipment company that offers VFD motor products and transmission substation equipment are in a leading position in the world. Explosion Proof VFD The explosion proof VFD is ommitted to intelligent control of mining. Improve the efficiency of the explosion proof electrical equipment, reduce the maintenance of the complete set of equipment, reliable operation to ensure production safety. With advanced design concepts and independent intellectual property rights, it has reached the international advanced level in terms of functionality and reliability. Specifications of the Explosion Proof VFD Input Voltage 660V/1140V Input Frequency 50Hz/60Hz Output Voltage 0-660V/1140V Output frequency 0-50Hz/60Hz Power semiconductor IGBT, Diode Input side of VFD Standard:6 pulse diode rectifier Option:6 pulse IGBT rectifier Quadrant Standard:2-Q Option: 4-Q Frequency Resolution 0.01Hz Overload capacity 220% Communication Internet、CAN、RS485 IP IP54, water cooling. Features of the Explosion Proof VFD The software system has built-in control programs such as a scraper, conveyor, and pumping station; Direct torque control has high control precision, fast dynamic response speed, and output torque greater than 2.2 times rated torque, which is suitable for heavy load starting occasions. CAN bus communication is adopted to realize master-slave control and power balance of multiple devices, and optical fiber communication is supported to realize data transmission and control; Long-life thin-film capacitors are used; The frequency converter has various protection functions such as overload, overvoltage, under-voltage, phase shortage, overheating, power imbalance, short circuit, etc.

CCS products are mainly oriented to coal mine, petrochemical, shipbuilding, metallurgy, electric power, large loading test bench and other fields. The electrical power transmission and control equipment have the characteristics of high protection, high efficiency, safety, environmental protection and energy saving. The electrical control devices integrates motor, frequency conversion control, system control and data transmission, and can provide customized products and solutions according to customer needs. CCS's is a power control equipment company that offers VFD motor products and transmission substation equipment are in a leading position in the world. Electric Control Box The electric control box can realize the protection functions for the short- circuit, overload, phase loss, and overheating of the circuit and make the operation more intelligent. The electric control box in CCS Electric is of high reliability, strong anti-interference capability and is free of maintenance. Parameters of the Electric Control Cabinet Voltage Range 380V-1140V Current Range 400A-800A Circuit No 2-8 Circuits Features of the Electric Control Box Highly mature technology; High reliability and anti-interference ability; Easy maintenance; Good system compatibility; Deployable in hazardous environment with high vibration,high temperature and humidity and intense EMI. Application of Custom Electrical Control Panels Applications on the mining machinery and construction machinery for electrical control and protection against short-circuit, overload, phase-loss, over temperature.

CCS products are mainly oriented to coal mine, petrochemical, shipbuilding, metallurgy, electric power, large loading test bench and other fields. The electrical power transmission and control equipment have the characteristics of high protection, high efficiency, safety, environmental protection and energy saving. The electrical control devices integrates motor, frequency conversion control, system control and data transmission, and can provide customized products and solutions according to customer needs. CCS's is a power control equipment company that offers VFD motor products and transmission substation equipment are in a leading position in the world. In addition to motors and frequency converters, CCS can also provide control systems and power supply products, such as remote control systems, power supply units, electrical operation boxes, etc. Choosing a good power supply unit for the whole equipment is very important, as every component relies on the PSU. When selecting your PSU, weigh the benefits against the price of the power supply unit, and try to make a good investment. In case of the failure of the main power supply, you also need a backup power supply as a substitute. A power supply unit with battery backup and a power supply unit with generator backup are two types of backup power based on power sources. Nowadays, more types of backup power supply units are getting more and more popular and are up for sale. Electrical Power Supply Unit and Control System Applications The electrical power supply unit connects an electrical power source to a device using electrical energy. The electrical connection means are comprised of an electrically conducting liquid and an electrically conducting plunger. By dipping, the plunger can be in touch with the liquid for electrically connecting the liquid to the power source and the plunger to the device. The invention is suitable for electrically connecting an electrical source to the electrode of an oven for treating a charge such as a metal charge. As for electronic chemical discharge machining, it requires a DC power supply and 30 to 160 applied voltage. The main purpose is to design a low-cost programmable DC power supply unit for the electronics laboratory. Introduction to Control Systems A control system refers to a management system with its own goals and functions, which is composed of control subject, control object and control media. It means that it is possible to maintain and change in the desired manner any amount of interest or variation within a machine mechanism or other device.

We are a CNC turned parts manufacturer, established in 1988, makes efforts in research and development of CNC lathe service. Our electronic locks parts are including smart door lock latch, spring latch, drive in latch, plain latch, deadlatch, spring-loaded hook latch, door locker latch, tubular mortice latch, internal sprung catch, mortise gear spindle, exit trim spindle, mortise cylinder. As a CNC turned parts manufacturer, we have been involved in the field of industrial CNC lathe service for more than 30 years. We can easily meet your requirements.