Industrial Machinery & Equipment - Others

Hangzhou Zetian Technology Co., Ltd. is the only company in China that has five analytical technology platforms including LED colorimetric platform, full- spectrum colorimetric platform, cold atomic absorption colorimetric platform, anode dissolution platform and electrode method platform. There are series of water quality testing instruments in ZETIAN. These five kinds of analysis platform used on our water analyzer instrument can measure the common pollution factors in water, including COD, ammonia nitrogen, total phosphorus, total nitrogen and heavy metals such as copper, chromium, lead, zinc, mercury, arsenic, etc. At the same time, our water analyzer equipment, using the full spectrum colorimetric platform or anodic dissolution platform also can realize COD/ ammonia nitrogen integrated system, total phosphorus/ total nitrogen integrated system, and all kinds of heavy metal integrated system, etc. The water quality analyzer equipment of ZETIAN, especially our portable water quality analyzer has been experienced years of on-site validation, stable and reliable, low failure rate. Product details are listed below. CODet-5000 CODcr Online Automatic Analyzer MDet-5000X Colorimetric Method Heavy Metal Online Analyzer WDet-5000 Ammonia-Nitrogen Online Automatic Analyzer WDet-5000 Total Phosphorus Online Automatic Analyzer WDet-5000CN Cyanide Online Analyzer Peristaltic Pump Tube Of Water Analyzer Equipment: The United States imported special rubber hose, long service life, a tube can use more than one year. Sample Module Of Water Quality Analyzer: Homemade sampling module uses the high pure PTFE material, disassembly easy to clean or replace, reliable operation, every channel is completely isolated. Control System Of Water Analyzer Instrument: (1) Control solenoid valve uses non-contact electronic switch, no mechanical life. (2) Homemade control unit, after years of verification, low fault rate, high reliability, modular design, low maintenance cost. Water Analyzer Instrument Protection-Grounding Design : Water analyzer instrument has high-level intelligence, such as reagents fault adding warning (especially H2SO4 used in COD, if it is not H2SO4, it is likely to lead digestion tube burst), leakage protection (if there is a leak, the instrument will report en error), pressure relief valve (making pressure in digestion tube within a certain range). All the external interface and main circuit of water analyzer equipment is in isolation, which makes the normal sample without the outside interference. Especially for unequal potential connection, its effect is particularly evident. In analog circuits (measurement module) also made electrical isolation, which makes the minimum possible interference on measurement. Measuring Parts Of Water Analyzer Equipment: Modulating optical measurement makes no influence of external light on measurement, the water quality testing instruments are more stable. External Interface Of Water Quality Analyzer: The largest configuration has 2×4-20 mA output, 4×4-20 mA input, 2 switch input, 2 switch output, can access the PH meter, flow meter, ss and other equipment, and can display on the main interface. Technology Platform Of Water Analyzer Instrument: Our water analyzer equipment has five measuring platforms, suitable for the needs of different applications.

Minimum Order: 1 bags

HANGZHOU ZETIAN TECHNOLOGY CO., LTD was established in 2008, and as a fast- growing company specialized in environmental pollution monitoring and industrial process control, ZETIAN’s instruments and emission analyzers can provide you best solutions, including series of water quality testing instruments and types of air quality monitors for sale. The car emissions test equipment has attracted more and more people's attention and attention because of its advantages of speed, convenience, and wide monitoring range. The vehicle emission testing equipment can monitor the exhaust gas of gasoline vehicles and diesel vehicles without affecting normal driving, and identify high-emission vehicles among moving vehicles. Through data communication technology, the integrated management of automobile exhaust emission data is realized. For vehicle pollution prevention and control management departments and vehicle inspection agencies, the establishment of the car emissions test equipment can provide system support for the comprehensive management of road exhaust pollution status data of specific vehicles, collection of over-standard vehicles, and on-site inspection data for inspections. Types Of Car Emissions Test Equipment ERMS-2000-M Mobile Vehicle Exhaust Telemetry System ERMS-2000-F Horizontal Stationary Vehicle Exhaust Remote Sensing System ERMS-2000-V Vertical Stationary Vehicle Exhaust Remote Sensing System Car emissions test equipment system is part of the air pollution analyzer and it can be divided into mobile remote sensing systems and fixed remote sensing systems. Fixed remote sensing systems are divided into two types, horizontal fixed and vertical fixed. The vehicle emission testing machine can be installed on urban main roads for continuous vehicle measurement, while mobile remote sensing systems can determine the location and time of measurement and become an effective supplement to fixed-point remote sensing measurement. Feature of Remote Car Emissions Test Equipment System: Movable Type Car Emissions Test Equipment: Calibration system integration Narrow-brand radar speed measurement, strong anti-interference ability Convenient Optical path adjustment, 15-minute layout WIFI wireless data transmission, convenient for site checking Highly integrated design, small size and light Horizontal Stationary Type Car Emissions Test Equipment: Real-time data matching, convenient and accurate Passive design at the reflection end, reduce installation difficulty Adopt imported laser device with excellent performance and high reliability Vertical multiple-point detection of vehicle position, measure exhaust gas more accurate and timely. Vertical Stationary Type Car Emissions Test Equipment: Real-time data matching Gasoline-diesel integration design Remote operation and management, convenient for operation and maintenance Integrated intelligent calibration system, more convenient for operation Optomechanics design with independent intellectual property, strong anti- interference ability Vehicle emission testing equipment helps realize more intelligent monitoring and management of automobile exhaust, if you are looking for professional vehicle emission testing equipment manufacturers, choose ZETIAN and contact us now.

Minimum Order: 1 bags

HANGZHOU ZETIAN TECHNOLOGY CO., LTD was established in 2008, and as a fast- growing company specialized in environmental pollution monitoring and industrial process control, ZETIAN’s instruments and emission analyzers can provide you best solutions. Overview Of DMS-100/MS-1000 DMS-100/MS-1000 is a self-developed online dust analysis product and a dust particle measuring device, adopting laser backward scattering measuring technology with imported core components. The DMS-100/MS-1000 dust particle measuring device is mainly used for continuous monitoring of PM emission concentrations of various pollution sources. The DMS-100/MS-1000 dust particle measuring device can be not only matched with CEMS continuous emission monitoring system but also be used separately or together with multiple dust monitors to form a dust monitoring network, sharing the same data collection and processing background. The DMS-100/MS-1000 dust particle measuring device is widely applied in enterprises including thermal power, ferrous metallurgy, petrochemical industry, cement production, potting, waste incineration; flue gas emission monitoring in all kinds of power generating boiler, industrial kiln, and industrial boiler; monitoring and control in gas desulphurization and dust removal process. Principle Of DMS-100/MS-1000 Dust Monitor The dms 100/MS-1000 dust particle measuring device consists of the optical part, circuit and signal processing part, calibrator and air curtain protection part. The laser beam (650nm) emitted by semiconductor laser enters the stack and produces scattering light by interaction with dust particles. The backscattered light of the DMS-100/MS-1000 dust particle measuring device enters the photosensitive detector through the convergence of the lens. The signal processing circuit converts the light signal into a standard signal in proportion to dust concentration and output, thus dust particle emission concentration of pollution source is obtained. Features Of DMS-100/MS-1000 Dust Monitor • The DMS-100/MS-1000 dust particle measuring device supports online zero and span calibration and meets dust monitor principle • The DMS-100/MS-1000 dust particle measuring device has automatic gain control function and temperature compensation • The DMS-100/MS-1000 dust particle measuring device is convenient for installation, disassembly and cleaning with small and compact structure • The DMS-100/MS-1000 dust particle measuring device is able to eliminate the influence of background stray light Specification Of DMS-100/MS-1000 Dust Monitor Measuring principle Laser backward scattering Measuring range 0～200mg/m3, 0～10g/m3 (customizable) Indication error ≤±20% Indication repeatability 10% Laser device 650nm Medium temperature ＜300℃ Ambient Temperature -20～＋45℃ Stack diameter ≥0.5m Analog output 4-20mA, maximum load 800Ω COMM interface Rs485, 2 ×relay output, bluetooth HMI IPC, APP（for MS-1000） Weight 4kg Power ＜3W Dimension 158mm* 158mm*234mm (square) 158mm* 158mm*273mm (circular) Supply voltage 24VDC±10% Installation Of DMS-100/MS-1000 Dust Monitor 1. The DMS-100/MS-1000 dust particle measuring device is installed on the stack by flange 2. The rain cover of the DMS-100/MS-1000 dust particle measuring device will be installed at the back end of the monitor 3. Power and gas source is connected at the back end of the DMS-100/MS- 1000 dust particle measuring device

Minimum Order: 1 bags

Fig 206 Hammer Union Working Pressure: 2,000 psi(138 bar) Features: O-ring in male sub improves sealing and protects metal-to-metal seal against corrosion Replaceable O-ring extends union 1-to 10-inch sizes Recommended Service: Manifold and line connections, suction service, and corrosion service Dezhou Rundong Petroleum Machinery Co., Ltd is a professional oil drilling equipment manufacturers, we provide drilling supply equipment, international oilfield supply, national oilfield supply and etc. Want to know more? Please contact us.

Minimum Order: 1 bags

Fig 200 Hammer Union fig-200.jpg Working Pressure: 2,000 psi(138 bar) Features: Economical,general-purpos , e union 1-to 4-inch sizes Butt-weld available Recommended Service: General-service manifolds and lines Dezhou Rundong Petroleum Machinery Co., Ltd is a professional integrated oilfield supply & services llc, we provide drilling supply equipment, international oilfield supply, national oilfield supply and etc. Want to know more? Please contact us.

Minimum Order: 1 bags

Fig 1502 Hammer Union Working Pressure: 15,000 psi(1034 bar) Features: Replaceable,lip-type seal provides primary seal,protects secondary metal-to- metal seal,and minimizes flow turbulence Butt-weld available Available for sour gas service:10,000 psi (690 bar)cold working pressure;butt- weld or non pressure-thread seal configurations only Recommended Service: Cementing, fracturing, acidizing, testing, and choke-and-kill lines Dezhou Rundong Petroleum Machinery Co., Ltd is a professional global oilfield services company, we provide drilling supply equipment, international oilfield supply, national oilfield supply and etc. Want to know more? Please contact us.

Minimum Order: 1 bags

Fig 100 Hammer Union Working Pressure: 1,000 psi(69 bar) Features: Pressure-tight; make-up with hammer Economical, low-pressure union Recommended Service: Manifold and line connections Dezhou Rundong Petroleum Machinery Co., Ltd is a professional big oilfield companies, we provide drilling supply equipment, international oilfield supply, national oilfield supply and etc. Want to know more? Please contact us.

Minimum Order: 1 bags

Fig 1002 Hammer Union Working Pressure: 10,000psi (690 bar) through 4-inch sizes; 7,500 psi (517bar), 5-and 6-inch sizes Features: Replaceable,lip-type seal provides primary seal,protects secondary metal-to- metal,and minimizes flow turbulence Butt-weld available Available for sour gas service:7,500 psi (517 bar)cold working pressure 5-and 6-inch sizes have O-rings for primary seals Recommended Service: Cementing, fracturing, acidizing, testing, and choke-and-kill lines Dezhou Rundong Petroleum Machinery Co., Ltd is a professional big oilfield companies, we provide drilling supply equipment, international oilfield supply, national oilfield supply and etc. Want to know more? Please contact us.

Minimum Order: 1 bags

Features F 800 mud pump for oil drilling have features of solid and compact structure, small volume, good and reliable performance. It can meet the drilling requirements such as high pressure and big displacements whether in land drilling or off-shore drilling. F series mud pumps have a longer stroke and can be operated at a lower stroke, thus improved the water supplying performance effectively and extended the lifetime of mud pump fluid end parts greatly. Forced lubrication combined with splash lubrication to make lubrication effect perfect; F Series Mud Pumps are manufactured under standard of API Spec 7k, mud pump parts at the fluid end are interchangeable with the parts that are in conformity with API Spec. The suction pulsation dampener has an advanced structure which is reliable to use and can make the pump realize its best suction performance. Performance of mud pump was greatly improved by durable fluid end; and examination, mud pump repair and mud pump maintenance are easier to make due to its independent structure. F-800 mud pump specification Model F-800 Rated Power(kW/HP) 597/800 Type Triplex Single-Acting Strokes per minute 150 Stroke Length(mm/in) 229/9" Max. Liner Dia(mm/in) 170/6 3/4" Gear Type Herringbone Gear Valve Pot API-6# Gear Ratio 4.185:1 Dia of Suction Inlet(mm/in) 254/10" Dia of Discharge Outlet 5 1/8"flange  5000psi Dia. of Pinion Shaft(mm/in) 177.8(7) Max Pressure(Mpa/psi) 34.5/5000 Overall Dimensions(mm/in) 3963*3025*2410 / 56"*119"*95" Weight  kg(lb) 14500(31970) Dezhou Rundong Petroleum Machinery Co., Ltd is a professional big oil drilling companies, we provide drilling supply equipment, international oilfield supply, national oilfield supply and etc. Want to know more? Please contact us.

Minimum Order: 1 bags

Heat resistance chemical dust collector PPS Needle Felt Filter Bag Industrial waste gas Felt Filter Bag Industrial Needled felt dust filter bag PPS punched felt filter bag’s fiber has strong full retention and intrinsic chemnical resistance, can keep good filtering performance in harsh environment, and reach the ideal service time. PPS is one ideal filter medium of the pulse dust collector which in coal-fired boiler, garbage incinerators and power plant fly ash. Product Description Heat resistance PPS Needle Felt Filter Bag adopet the PPS from the USA, Japan, etc., according to other production process of high temperature resistant filter felt, production and processing of filtering material, one of the main products for high temperature resistant filter material.   Performance: 1. Operation Temp. 170 ℃, Instant Temp.232 ℃, melting point 285 ℃, limit oxygen index 34-35. 2. Operaiton is in the conditions where oxygen content ≤ 15% . 3. The fiber is anti-acid, anti-alkali and anti-corrosion, can be applied in the operation environment which fuel containing sulfur or gas containing sulfur oxides. 4. The occasion of containing moisture in the flue. 5. Under the condition where Temp. is 190-232 ℃ , air to cloth ration is up to  5:1 at online dust cleaning,  and air to cloth ration is 6:1 at offline cleaning dust. Technical parameters of Needle Felt Filter Bag Material PPS Heat resistance filter bag Weight(g/m2) 450 500 550 >800 Thickness(mm) 1.6 1.8 2.0 2.0 Air Permeability(m3m2/min) 18 15 12 8~15 Breaking Strength (N/5×20cm) Warp direction >1150 >1200 >1200 >2000 Weft    direction >1200 >1300 >1400 >2000 Breaking Elongation (％) Warp Weft Rupture Strength (Mpa/min) 2.7 2.60 2.45 3.10 Continuous Operation   Temp. (℃) ≤190 ≤190 Instant operation Temp.(℃) 232 232 Acid Resistance super super Alkalis Resistance super super Abrasive Resistance super super Hydrolytic Stability super super Spray rating (Water Tep.27℃relative humidity 20%) 5 Grade AATTCC100 5 Grade AATTCC100 Finishing High temperature hot pressing 、Singeing、water proof、oil- proofprocessing、Coating Singeing、Calendering、water-proofoil-proof processing、Coating FAQ abut Needle punched dust collector filter bag 1.How to assure the product quality? We will send the sample for your confirmation first,and then produce the products according to your requirement.  2.Can you provide free sample?  Normally, our sample fee is free. However, you have to pay us the courier cost like:DHL.TNT...   3.Generally, what is the delivery? In normal circumstances, the products manufacture time within 15 days.  4.What shipments are available? Normally, the way as follows: (1) By sea: to your nearest sea port (2) By air: to your nearest air port (3) By express: (DHL.TNT...) to your door Packing and Shipping Filter bags will be Packed by Polyester bags, carton box. We have the capacity to provide product such as industrial dust collecting system, pneumatic conveyor and stirrup wire bending machine design, manufacture and after-sale service. For more Dust Collector Accessories, please visit our website. https://www.hbtzmt.com/

Minimum Order: 1 bags

Factory supply dust unloading ash rotary air discharge valve discharge valve for cement plant Star Ash discharging valve Rotary airlock valves serve as a "lock” to prevent air loss while simultaneously performing vital material handling functions.it have wide application in industry wherever dry free-flowing powders, granules, crystals, or pellets are used. Typical materials include: cement, ore, sugar, minerals, grains, plastics, dust, fly ash, flour, gypsum, lime, coffee, cereals, pharmaceuticals, etc. Industrial Rotary airlock feeder Description The star unloader is divided into round star unloading valve and square star unloading valve according to its external structure. It can also be divided into three types: ordinary type, pressure type and high temperature type. The star-shaped ash discharge valve is mainly composed of a motor, a reducer, a casing, an impeller, a main shaft, a bearing, and left and right end covers. Adopting high-quality steel plate welding structure, the blade has strong abrasion resistance, and integrates transmission device, transmission shaft and blade. The unloader can be used in the material collection system. As the unloader of the silo, it is often used in the dust removal system as one of the important equipment of the dust removal system.It is especially suitable for dust. Grain, cement, road construction, drying equipment and other industrial projects are selected and used. Rotary airlock valves Main Technical Parameters: Port Size mm 200 250 300 350 400 450 Capacity m³/h 10 20 25 35 40 60 Rotate Speed: R/min 24 24 24 24 24 24 Power: KW 0.75 1.1 1.5 1.5 1.5 1.5 AIR LOCK VALVE Features: 1. Compact structure, beautiful appearance and easy to use. 2. Smooth operation and low noise. 3. Since the bearing and gearbox are separated from the housing for a certain distance, the high temperature and lubrication are greatly improved. 4. The factory can also design and manufacture according to user requirements. 5. This product is shipped from the factory. It is filled with special grease for pinwheel cycloid reducer. Please check the oil regularly. Packaging & Shipping: We test rotary airlock feeder before it is packaged and transported: Main part and relative valves, instrument: composite material box packed, rain- proof. FAQ 1. Q: Are you a factory or trading company? A: We own 1 factory and  have 2 cooperated factories,  hebei taizhe machinery trading Co.,ltd is a trading company.We have the improvement teams from design, manufacture....to installation, commissioning and staff training 2. Q: Where is your factory located? How can I visit there? A: Our factory is located in Shijiazhuang City, the capital of Hebei Province, 1.5 hours way by high-speed rail from beijing to shijiazhuang.It’s near the airport and train station. 3. Q: How does your factory do regarding quality control? A: We test our machine before shipping. Our factory has gained ISO9001:2008 authentication. 4.Q: How long is the warranty? one year warranty and free cunsultaion during the period of use. 5.Q: how to pay for the product? L/C, T/T and Western union is available.  Founded in 2007, Hebei Taizhe Machinery Equipment Trading Co., Ltd is a dust collection system manufacturer with R & D, design, production, installation and after-sale service. Have many years of export experience, worthy of your trust! For more Industrial Dust Collector, Please click here. https://www.hbtzmt.com/product-factor , y-supply-dust-unloading-ash-rotary-air- dischar , ge-valve.html

Minimum Order: 1 bags

Advantages Of Plastic Injection Molding 1. Easy to shape and process 2. Provides strength and durability 3. Available in various colors 4. Requires little to no finishing 5. Has a faster production time 6. Is a lightweight material 7. Provides chemical resistance Contact us on: http://chinacastingunion.com/

Minimum Order: 1 bags

Description Model 32EDQS15S is a kind of self-priming gas-liquid mixing pump which is installed horizontally. It uses standard click-coupled connections. The wetted components of the pump are all made of stainless steel. The suction inlet of the gas-liquid mixing pump can absorb gas through negative pressure, so there is no need to use gas compressor and atmospheric ejector. High speed rotating impeller to stir liquid and gas, no need for compressor and mixer. Pump pressure stirring, so that the gas and liquid completely dissolved, dissolved efficiency can reach 80 ~ 99%. Thus, high-pressure solutions can be obtained without large pressurized gas tanks or expensive reaction towers. Gas-liquid mixing pump can be used to attract, mix, dissolve and transfer highly dissolved liquid directly to the point of use. Therefore, the use of gas-liquid mixing pump can improve the production efficiency of dissolved gas, simplify the preparation equipment, save space, greatly reduce the initial investment, and save the operation cost and maintenance cost. As the micro bubble generator manufacturers, we have excellent micro bubble generator system, welcome to consult. ApplicationDisassembly And Assembly Application 1.For food and chemical removal in pretreatment for waste water treatment 2.For recycling of high-grade paper fiber 3.For excrement (livestock) treatment 4.For pretreatment of kitchen waste water containing oil and fat 5.For removing impurities from well water in preparation for various industries including semiconductor pure water production. 6.For treating water in pond or lake purification 7.For providing a micro-bubble bath at a hotel or the like 9.Etc. About Edon-China Micro Bubble Generator Manufacture Hello and welcome to Edon pump. We are a manufacturer of micro bubble generator which also called gas liquid mixing pump or DAF pump. Since its interception, our company has been researching, developing and adapting our micro nano bubble generator pumps to make it suitable for different specialty and new application or compatible to different countries' electricity system. From our factory in Shanghai, we have micro bubble generator for sale. if you need. we can offer you different models of micro bubble generator for your various applications and standby spare parts.

Minimum Order: 1 bags

Description Model 25EDQS11S is a kind of self-priming gas-liquid mixing pump which is installed horizontally. It uses standard click-coupled connections. The wetted components of the pump are all made of stainless steel. The suction inlet of the gas-liquid mixing pump can absorb gas through negative pressure, so there is no need to use gas compressor and atmospheric ejector. High speed rotating impeller to stir liquid and gas, no need for compressor and mixer. Pump pressure stirring, so that the gas and liquid completely dissolved, dissolved efficiency can reach 80 ~ 99%. Thus, high-pressure solutions can be obtained without large pressurized gas tanks or expensive reaction towers. Gas-liquid mixing pump can be used to attract, mix, dissolve and transfer highly dissolved liquid directly to the point of use. Therefore, the use of gas-liquid mixing pump can improve the production efficiency of dissolved gas, simplify the preparation equipment, save space, greatly reduce the initial investment, and save the operation cost and maintenance cost. Our micro nano bubble generator is excellent, if you need microbubble generator design. Please contact us. ApplicationDisassembly And Assembly Application 1.For food and chemical removal in pretreatment for waste water treatment 2.For recycling of high-grade paper fiber 3.For excrement (livestock) treatment 4.For pretreatment of kitchen waste water containing oil and fat 5.For removing impurities from well water in preparation for various industries including semiconductor pure water production. 6.For treating water in pond or lake purification 7.For providing a micro-bubble bath at a hotel or the like 8.Etc. About Edon-China Micro Bubble Generator Manufacture Hello and welcome to Edon pump. We are a manufacturer of micro bubble generator which also called gas liquid mixing pump or DAF pump. Since its interception, our company has been researching, developing and adapting our micro nano bubble generator pumps to make it suitable for different specialty and new application or compatible to different countries' electricity system. From our factory in Shanghai, we have micro bubble generator for sale. if you need. we can offer you different models of micro bubble generator for your various applications and standby spare parts.

Minimum Order: 1 bags