Industrial Machinery & Equipment - Others

Horizontal chemical process pump HZ (closed impeller type) chemical process pump is a single stage, single suction, cantilever type centrifugal pump which absorbs the advanced technologies from overseas, and is designed based on the advantages of F1, IH, CZ, ZBG chemical process pumps. HZ chemical process pump owns the features of better operation performance, anti-cavitation, long life of mechanical seals and bearings, reliable operation, updated structure and easy maintenance. Parameters Flow rate: Q= 2~2050 （m³/h） Total head: H=3~150 (m) Speed: n=1450/2900rpm Temperature: T=-20~250℃ S.g.: γ≤1.85 Pump diameter: 50~350mm ZGPV Chemical Process Pump Features The impeller is a closed impeller, which uses rear blades and wear rings to balance axial forces. The impeller and shaft are connected by a key and locked by a special impeller nut. Eliminates the possibility of impeller nuts becoming loose during operation, shutting down, and backflow. Back-pull design, the rotating part can be removed from the housing without removing the pipe. The sealed cavity is designed with a tapered space to install the mechanical seal into a spacious room. At the same time, the impeller rear blade, the inner surface and the guide blade work together to form a self-flushing flow sealed cavity without any external flushing fluid. Self-flushing flow can quickly eliminate the heat on the friction pair; self-flushing flow can avoid the accumulation of particles (<5%) between the moving ring and the static ring, thereby extending the service life of the mechanical seal. chemical process pump Structure Single-stage single-suction horizontal centrifugal pump structure, the pump cover is fixedly clamped in the middle by the connection between the pump body and the bearing housing, and the pump cover is positioned with the bearing port and the bearing housing. The pump body adopts axial suction, radial discharge, foot support type, and can be directly fixed on the base. The tail of the bearing housing is supported on the base by the suspension bracket. The impeller and the shaft are connected by a key, and a special impeller nut locking method is adopted to prevent the impeller nut from loosening when the medium is poured during operation or stopping the pump. The flushing and cooling interfaces of the pump body, pump cover, bearing housing and sealing end cover are all made of taper pipe thread, which increases the reliability of the pipeline seal. The bearing is made of rolling bearing, oil lubrication, and the oil pool volume is increased. The structure of the pump is designed as a rear door. When the inlet and outlet of the pump are not moved during the inspection (ie, the pump body does not move), the impeller, shaft, shaft seal and bearing components can be removed. The large conical cavity of the shaft seal box makes the mechanical seal in a spacious cavity, and also cooperates with the back vane, the guide vane of the inner wall of the cavity, and forms a self-flushing flow field in the shaft seal box, thereby eliminating the need The external flushing fluid is used to achieve self-flushing; the heat generated on the frictional secondary surface is quickly taken away, avoiding the accumulation of solid particles (<5%) in the medium on the contact surface of the rotating ring and the stationary ring, reducing wear and prolonging the machine. Sealed life MOC No. Description Material Anti-corrosion alloy Cast steel Stainless steel China standard ASTM standard China standard ASTM standard China standard ASTM standard 1 Pump casing 20# Alloy Titanium Nickel 904L Ti/Pd Alloy Monel Hastelloy Monel Ⅱ-B Ⅱ-C Ni-Resist1 , Ni-Resist2 Ni-Resist3 25# 35# WCA WCB ZG1Cr13 ZG2Cr13 ZG00Cr18Ni10 ZG0Cr18Ni9 ZG0Cr18Ni12Mo2Ti ZG0Cr17Ni4CuNb ZG1Cr18Ni9 , ZG1Cr18Ni9Ti ZG00Cr17Ni14Mo2 0Cr26Ni5Mo2 , 0Cr17Mn13Mo2N 00Cr18Ni5Mo3Si2 CA-15 CA-15M CF-3(SS304L) CF-8(SS304) , CF-8M(SS316) CF-3M(SS316L) CN-7M(SS320) C , D-4MCu 2205 2 Sealing ring 3 Impeller 4 Pump cover 5 Impeller nut 6 Cartridge seal 7 Shaft Carbon steel     SS420    2205    SS304    SS316 8 Bearing Housing Cast iron ZGPV hemical process pump Application HZ/HZQ chemical process pump is suitable for pumping mineral acid solutions, organic acid solutions, brines, petrochemical solutions, organic compounds and other corrosive raw materials and products. It is mainly used in the below sections. Multiple evaporation and MVR evaporation process Refinery, petrochemical industries, coal chemical industries and low temperature projects Chemical industry, paper making industry, pulp industry, sugar making and other general process industries. Water plant, seawater desalinization Power plant Environment protection Vessel and at sea industries. Visit company website: https://www.zgpumpvalve.com/

High quality plastic shopping basket mould handle fruit vegetables basket mould Place of Origin:Zhejiang, China Brand Name:SOLIDCO Shaping Mode:Plastic Injection Mould Product Material:Plastic Product:Household Product Product Name:Plastic Portable Shopping Basket Mould usage:picnic basket,shopping basket,egg basket plastic material:pp

110kg OASIS Barrier Washer Medical Barrier Washer Extractor Hospitals; Nursing homes; Cleaning companies; Nuclear Plants; Fire Brigades; Hotels High quality and robust construction Low water, steam and electrical consumption Higher protection against the spreading of infection Barrier Washer OASIS introduction Hygienic barrier concept The linen is loaded into the drum through a large door opening on one side of the laundry, the soiled side. At the end of washing cycle, the clean linen is unloaded from the washer-extractor through a second and opposite door in another room, the clean side of the laundry area. A barrier separates the clean and dirty side of the laundry. In this case, there is no possibilities that bacteria, dust or other dirt particles come into contact with the clean linen. As we mentioned before, the strongest risk is the recontamination of clean linen by contact of air, surfaces and workers. Using barrier washer-extractor (positioning through a physical wall) offers the best protection for employees, patients and the best prevention for the spreading of micro-organisms. Barrier Washer OASIS Standard Features Freestanding, high spin Drum with 1 pocket Stainless steel (AISI 304) cabinet, drum and tube Parts in contact with water made of SS304 stainless steel Large door for easy loading and unloading. Large sight glass for visible working process. Oversized frame, bearings and drum Large air operated drain valve Auto door positioning system Easy access to all mechanical parts Frequency controlled motor Brake resistor, instance braking Powerful microprocessor - Freely programmable with up to 50 programs Standard cold and hot water inlet valves and one drain valve Direct steam injection heating Air bags suspension system ensure quiet and smooth extraction (available for SXTG-600 and SXTG-1100) Soap Dispenser with 5 compartments Signal up to 5 dose pumps Safety devices - emergency stop, overload protector, air lock doors, air spring door support, safety door interlock system, additional door lock sensor, unbalance switch, heat resistance door glass, double vibration control, buzzer, etc. Options SS316L stainless steel for high specification clean room application Multi-language Wash record printer Built-in weighing system Electrical heating or indirect steam coil heating Third water inlet valve and second drain valve for water reuse Water sampling valve Liquid soap pump for liquid detergents

Minimum Order: 1 bags

Hygienic barrier concept The linen is loaded into the drum through a large door opening on one side of the laundry, the soiled side. At the end of washing cycle, the clean linen is unloaded from the washer-extractor through a second and opposite door in another room, the clean side of the laundry area. A barrier separates the clean and dirty side of the laundry. In this case, there is no possibilities that bacteria, dust or other dirt particles come into contact with the clean linen. As we mentioned before, the strongest risk is the recontamination of clean linen by contact of air, surfaces and workers. Using barrier washer-extractor (positioning through a physical wall) offers the best protection for employees, patients and the best prevention for the spreading of micro-organisms. Medical Barrier Washer OASISS tandard Features Freestanding, high spin Drum with 1 pocket Stainless steel (AISI 304) cabinet, drum and tube Parts in contact with water made of SS304 stainless steel Large door for easy loading and unloading. Large sight glass for visible working process. Oversized frame, bearings and drum Large air operated drain valve Auto door positioning system Easy access to all mechanical parts Frequency controlled motor Brake resistor, instance braking Powerful microprocessor - Freely programmable with up to 50 programs Standard cold and hot water inlet valves and one drain valve Direct steam injection heating Air bags suspension system ensure quiet and smooth extraction (available for SXTG-600 and SXTG-1100) Soap Dispenser with 5 compartments Signal up to 5 dose pumps Safety devices - emergency stop, overload protector, air lock doors, air spring door support, safety door interlock system, additional door lock sensor, unbalance switch, heat resistance door glass, double vibration control, buzzer, etc. More information you can click here Options SS316L stainless steel for high specification clean room application Multi-language Wash record printer Built-in weighing system Electrical heating or indirect steam coil heating Third water inlet valve and second drain valve for water reuse Water sampling valve Liquid soap pump for liquid detergents Special voltage system

Minimum Order: 1 bags

35kg OASIS Barrier Washer Medical Barrier Washer Extractor Hospitals; Nursing homes; Cleaning companies; Nuclear Plants; Fire Brigades; Hotels High quality and robust construction Low water, steam and electrical consumption Higher protection against the spreading of infection barrier washing machine introduction Hygienic barrier concept The linen is loaded into the drum through a large door opening on one side of the laundry, the soiled side. At the end of washing cycle, the clean linen is unloaded from the washer-extractor through a second and opposite door in another room, the clean side of the laundry area. A barrier separates the clean and dirty side of the laundry. In this case, there is no possibilities that bacteria, dust or other dirt particles come into contact with the clean linen. As we mentioned before, the strongest risk is the recontamination of clean linen by contact of air, surfaces and workers. Using barrier washer-extractor (positioning through a physical wall) offers the best protection for employees, patients and the best prevention for the spreading of micro-organisms. Medical Barrier Washer OASIS Standard Features Freestanding, high spin Drum with 1 pocket Stainless steel (AISI 304) cabinet, drum and tube Parts in contact with water made of SS304 stainless steel Large door for easy loading and unloading. Large sight glass for visible working process. Oversized frame, bearings and drum Large air operated drain valve Auto door positioning system Easy access to all mechanical parts Frequency controlled motor Brake resistor, instance braking Powerful microprocessor - Freely programmable with up to 50 programs Standard cold and hot water inlet valves and one drain valve Direct steam injection heating Air bags suspension system ensure quiet and smooth extraction (available for SXTG-600 and SXTG-1100) Soap Dispenser with 5 compartments Signal up to 5 dose pumps Safety devices - emergency stop, overload protector, air lock doors, air spring door support, safety door interlock system, additional door lock sensor, unbalance switch, heat resistance door glass, double vibration control, buzzer, etc. https://www.oasislaundrygroup.com/barr , ier-washer/ Options SS316L stainless steel for high specification clean room application Multi-language Wash record printer Built-in weighing system Electrical heating or indirect steam coil heating Third water inlet valve and second drain valve for water reuse Water sampling valve Liquid soap pump for liquid detergents Special voltage system

Minimum Order: 1 bags

OASIS Automatic Soft-mount Washer Extractor 40kg Product introduction Main Features STAINLESS STEEL CONSTRUCTION All metallic parts that come into contact with wash are in AISI304. Durable AISI304 stainless steel inner and outer drums designed for constant use. Front, side, and top panels are all in AISI304. MOLDED FABRICATION 80% above parts are processed by molds. The inner and outer drum is processed by laser. Achieve compact design, light but robust structure. Maximize the durability and longevity. INDEPENDENT SUSPENSION SYSTEM With the multi directional springs system, the machine can absorb 97% of all vibrations. Ensure the stability when the extract speed reaches up to max. 350G. DRIVE SYSTEM Specially made inverter, the inverter controlled motor and the matched controller programs enable the extract speed reach up to 350G. Advanced electronic balancing technique achieves out of balance automated load adjustment. Significant reduction in noise, vibration, and fatigue of the washing machine components. SUPER-SPEED EXTRACT The OASIS 40KG Washer Extractor is able to quietly and gently reach extract speed up to Max. 350G. This feature benefits the laundries with less operation time, less drying-time which brings lower energy consumption and labor expense. PERFECT CLEANING QUALITY Large diameter basket with multiple ribs produces better mechanical wash action for optimum wash quality with less detergent. Single motor inverter drive allows programmable right wash speed for wide variety of fabrics. 5 automatic detergent cups turn over and flush all detergents thoroughly into the basket, no remaining lump in cups. INSTALLATION Thanks to the independent suspension system, the washers can be installed on any normal and unconventional locations with zero impact on the floor or ground. Optimized balance - No anchoring required. EASY MAINTENANCE All components requiring regular maintenance are easily accessible.

Minimum Order: 1 bags

Compact design for space saving It adopts world latest MFS suspension technology and DFW patently electric balance shockproof technology to create better stability and durability, compared to the conventional washer extractors OASIS. The internal and external drum and flanged shaft are all made by mould without welding points, with qualified mirror finished SS304 stainless steel. Strengthened aluminum alloy pulley with imported drive belt adopted to prolong the use life and reduce the inertia load of the motor. Both automatically control and manual control system. The variable speed control system with vector multiple-speed linear. High extraction speeds up to 860RPM. PUNP brand programmable computer up to 32 wash programs Programmable water levels, temperatures and cool-down Steam heating OR electrical heating is optional Safety door interlock system with large sight glass Wide, rugged doors with viton seals Stainless steel panels OR painting panels is optional. Standard one cold water inlet. Hot water inlet is optional.  OASIS reserves the right to modify the specifications without prior notice.  Technical Specifications Model Unit SXT-250FD/ZQ Basket Capacity KG 25 Drum Volume L 251 Drum Depth   mm 534 Drum Diameter mm 774 Speed of basket Wash Speed rpm 45 Mxx.Spin speed rpm 860 G-force G 320 Pipeline Cold water inlet inch 3/4 Hot water inlet inch 3/4 soap inlet inch Water outlet inch ￠51 Steam inlet inch 1/2 Pressure Steam Pressure mpa Water Pressure mpa 0.15-0.4 Loading door Diameter mm 539*539 Door center height mm 880 Power Motor KW 2.2

Minimum Order: 1 bags

15kg Automatic Soft-mount Washer Extractor Compact design for space saving It adopts world latest MFS suspension technology and DFW patently electric balance shockproof technology to create better stability and durability, compared to the conventional washer extractors. The internal and external drum and flanged shaft are all made by mould without welding points, with qualified mirror finished SS304 stainless steel. Product introduction Washer Extractor OASIS Features: Compact design for space saving Strengthened aluminum alloy pulley with imported drive belt adopted to prolong the use life and reduce the inertia load of the motor. Both automatically control and manual control system. The variable speed control system with vector multiple-speed linear. High extraction speeds up to 800RPM. PUNP brand programmable computer up to 32 wash programs Programmable water levels, temperatures and cool-down Steam heating OR electrical heating is optional Safety door interlock system with large sight glass Wide, rugged doors with viton seals Stainless steel panels OR painting panels is optional. Standard one cold water inlet. Hot water inlet is optional. More information you can click here https://www.oasislaundrygroup.com/washer-e , xtractor/15kg-automatic-soft-mount- washer-extr , actor.html

Minimum Order: 1 bags

We supply quality Disposable/ Refillable Cricket Lighter to our clients all over the world at very competitive price. Our Bic Lighter meets consumer demands for quality and performance,1) BI Lighter Maxi (J26)Packaging50 pcs per Tray12 trays per carton63 cartons Per Pallet33 pallets per 40ft Container11 Pallets per 20ft Container 2) BI Lighter Mini (J25)Packaging50 pcs in a single tray12 trays / carton63 cartons / pallet33 pallets per 40ft ContainerSPECIFICATION Size: 64mm * 17mm * 17mm Individual Dimensions: W1.4, D1.8, H6.5Pack/Tray Dimensions: W18.1, D13.7, H13Size of Pack: 48Pack Weight: 1.04kgIndividual Barcode: 84127748100Pack Barcode: 84127749621Transit Case Barcode: 84127359481Case Dimensions: W39, D29.5, H28Quantity in Case: 20 trays in a caseCase Weight: 8.32kgMaterial: Metal Shell, Nylon gas tank movement, Power Stone wheel.Shape: Irregular Cylindrical You can Lifestyle unique features:1. You can replace flint and inflate repeatedly use: Long service life; compare to the lighter, inflatable purchasing new can save 90% of the cost. Without leave, they cherish forever.2. Safe fixed flame: Maximum height of 50mm, to avoid burns safer constant fire.3.Pure isobutane gas: Tasteless and stable flame:4.Continue and pass the IS09994: Top quality.5.Enough gas capacity; 3000 for ignition, gas lighter equivalent to twice the normal capacity.6.Nylon gas tant: Anti-gray and self -extinguishing, safety.7.Housing Metal Protection: degree, sleeker, high temperature, anti- fall, safe enough.8.Power Whee: Shousong Both off, very safe.9.Most of the pieces are recyclable and environmentally friendly material.10. All lifestyle lighter can, with the best and most unique system of child protectionContact us for more information and quotation

Minimum Order: 5 dozens

OEM Pump Parts We also have OEM Pump parts production service, if you have drawing or part sample, please tell us your required material, we will make the perfect pump part to meet your request! We have our own foundry and machining house, welcome OEM pump parts, include pump casing, pump volute liner, pump impeller, mechanical seals, shaft, shaft sleeves, etc. What you need to do is provide part samples or drawing to us, we will make the parts as per your request. https://www.topslurrypump.com/product- , oem-pump-parts.html

Minimum Order: 1 bags

HEDUN Vertical Froth Pumps The pump head use double shell structure, the flow-parts use hard nickel, high chromium or rubber material, and its driving section is universal with SP(R) type pump. Hopper charging box use steel plate structure, liner plate can be covered if the conveying media required, and the pump outlet opening position can be interval changed by 45°. This series of froth pump can effectively eliminate the foams and bubbles out of the slurry during the operation. Even the feed-in material is not enough, the pump can still work normally. odel Power P（KW） Capacity Q(m³/h) HeadH(m) Speed n(r/min) Eff. % Inlet dia.(mm) Outlet dia.(mm) HDF2Q 3-15 6-43 6-30 800-1800 45 100 50 HDF3Q 3-18.5 23-78 5-28 700-1500 55 150 75 HDF4R 5.5-37 33-187 5-28 500-1050 55 150 100 HDF6S 15-75 80-393 5-25 250-680 55 200 150 HDF8S 37-110 126-575 5-26 350-650 55 250 200 Application Specially for delivering the frothy slurry of abrasion in flotation process in mines, metallurgy, chemical process, coal industries, etc The Vertical Froth pump is suitable for: The Vertical Froth Pump is ideal for all applications involving handling of air entrained slurry, such as flotation froth in base metal concentrators, phosphate and apatite washing plants and calcium carbonate upgrading plants The pump can be used as a mixing and distribution unit, where dry powder has to be mixed (and wetted) with water. Application field: Iron Ore Dressing Plant Copper Concentration Plant Gold Mine Concentration Plant Molybdenum Concentration Plant Potash Fertilizer Plant Mineral Processing Plants

Minimum Order: 1 bags

In order to meet the requirements on the development of mining, the power plant, metallurgy and coal industries, our engineers have designed and developed Series HDZG(S) Generation Slurry Pump with large capacity, high head, multi-stages with experience of slurry pump design and manufacture for many years, and absorbing the research results of advanced technology from home and abroad. They are suitable to deliver slurry with high concentration with the high head. Note: Quantity range recommended:50%Q’≤Q≤100%Q’(Q’Appropriate to capacity at highest efficiency point).2.NPSH:appropriate to point Q recommended at highest speed.  We are slurry pump manufacturer Application of HDZG Slurry Pumps: It can be widely used for handling the mixture of abrasive and corrosive solids in power, metallurgy, coal, building materials, chemical industry departments, especially for removing ash and sludge in power plant. Click here to get slurry handling pump price

Minimum Order: 1 bags

HDM Series slurry pump is mainly using for handing strong abrasive, high density slurry and low density, high head slurry in the metallurgical, mining, coal, power, building material and other industrial departments etc.   The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. The frame plate liner and impeller for HDM pump are adoptable of hard metal only. Bearing assembly of this kind of slurry pump applied cylindrical structure, adjusting the space between impeller and front liner easily, and removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. They have excellent performance, good NPSH and high efficiency. The pump of this type may be installed in multistage series to meet the delivery for long distance.   Main application of high efficiency Slurry pump   This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc.   Typical Applications of Hedun pumps: 1) Mining slurry transfer in metallurgy concentrating mill 2) Ash handling in thermal power plant, 3) Coal slurry transfer in coal washing plant 4) Separate sand from sea water 5) Dredging sand and mud in river, sea and lake 6) Transfer corrosive slurry in chemical industry 7) Coal washery and iron tailing industry 8) Gold and copper mining 9) Transfer slurry with big particles 10) Cleaning setting pond in steel mill and ore treatment plants 11) Cleaning coal setting pond in Power plant 12) Transfer tailing slurry and slag in ore treatment plants 13) Transfer carborundum, silica sand and steel slag Go url to ger the high efficiency Slurry pump price   HDM Series Slurry Pump Performance Chart  Pump Model Allowable Max. Power(kw) Clear Water Performance capacity Q Head H(m) speed n(r/min) Max.eff. η% NPSH  (m) Impeller Dia(mm) m3/h l/s HDM-8E 120 540-1440 150-400 14-60 600-1000 73 4-10 549 HDM-8R 300  Note: 1.Quantity range recommended:50%Q’≤Q≤100%Q’(Q’Appropriate to capacity at highest efficiency point).2.NPSH: appropriate to point Q recommended at highest speed. 

Minimum Order: 1 bags

HDL Light duty series slurry pumps is suitable to transport low-abrasion and low concentration slurry in the metallurgical, mining industry and building material industry. This slurry pumping equipment offers many advantages specially for using in watery or other liquid-filled environments. With a more laconic structure, this pump requires much smaller space. Its shaft seal adopts both packing seal and centrifugal seal. In most conditions, centrifugal seal can work well and there is no necessity for seal water. If packing seal is adopted, the device should be attached with low or full-flow seal flushing device. Meanwhile, the Metal Light Duty Slurry Pump casing of this slurry handling equipments is padded with replaceable metal liners which are highly resistant for abrasion. The impeller is made of anti-abrasion metals or abrasive rubber. That is why it enjoys a much longer service lifespan. The frame plates of HDL Series Hedun Centrifugal slurry pump have changeable, wear-resistant metal liners or rubber liners upon request and the impellers are made of wear-resistant metal or rubber. And the discharge branch can be oriented to any of the eight different positions for installation and application upon request. The shaft seals could adopt the Packing

Minimum Order: 1 bags