Other Industrial Equipment

This is oilless enclosed slide valve whose main valve adopts hard ceramic. With its outstanding durability in any type of environment, it is most suitable for both high and low frequency uses Model code Return 416S201E 416S202E 416S302E 416S303E 416S603E 416S604E Hold 416D201C 416D202C 416D302C 416D303C 416D603C 416D604C Closed center 416H201C 416H202C 416H302C 416H303C 416H603C 416H604C Center open to pressure 416I201C 416I202C 416I302C 416I303C 416I603C 416I604C Center open to exhaust 416J201C 416J202C 416J302C 416J303C 416J603C 416J604C Nominal size of main valve B20 B30 B60 Port size Rc1/8 Rc1/4 Rc3/8 Rc1/2 Effective area of valve 416S・D 16mm2 17mm2 20mm2 25mm2 43mm2 51mm2 416H・I・J 13mm2 14mm2 16mm2 18mm2 40mm2 45mm2 Working pressure 0.12～1.0MPa Ambient temp. -20～60℃

Minimum Order: 1 bags

The main valve is the spool valve, which employs a unique soft seal I-ring for spool packing made of self-lubricating material. This has remarkable improved operation reliability. Model code Return 414S201C 414S202C 414S302C 414S303C 414S603C 414S604C 414SA14C 414SA16C 414SA96C 414SA91C Hold 414D201C 414D202C 414D302C 414D303C 414D603C 414D604C 414DA14C 414DA16C 414DA96C 414DA91C Closed center 414H201C 414H202C 414H302C 414H303C 414H603C 414H604C 414HA14C 414HA16C 414HA96C 414HA91C Center open to pressure 414I201C 414I202C 414I302C 414I303C 414I603C 414I604C 414IA14C 414IA16C 414IA96C 414IA91C Center open to exhaust 414J201C 414J202C 414J302C 414J303C 414J603C 414J604C 414JA14C 414JA16C 414JA96C 414JA91C Nominal size of main valve B20 B30 B60 B110 B190 Port size Rc1/8 Rc1/4 Rc3/8 Rc1/2 Rc3/4 Rc 1 Effective area of valve 16mm2 20mm2 25mm2 30mm2 51mm2 60mm2 94mm2 110mm2 160mm2 190mm2 Working pressure 0.2～1.0MPa Ambient temp. -5～50℃

Minimum Order: 1 bags

A simple spool valve is arranged in a small width rectangular body. This has made a compact valve small yet capable of large flow rate Model code Return 454S04FC 454S04MC 454S091C 454S202C 454S203C 454S403C 454S404C Hold 454D04FC 454D04MC 454D091C 454D202C 454D203C 454D403C 454D404C Closed center 454H04FC 454H04MC 454H091C 454H202C 454H203C 454H403C 454H404C Center open to pressure 454I04FC 454I04MC 454I091C 454I202C 454I203C 454I403C 454I404C Center open to exhaust 454J04FC 454J04MC 454J091C 454J202C 454J203C 454J403C 454J404C Nominal size of main valve B04 B09 B20 B40 Port size 4mm M5 RC1/8 RC1/4 Rc3/8 Rc1/2 Effective area of valve 4mm2 9mm2 22mm2 40mm2 Working pressure 0.2～1.0MPa Ambient temp. -5～50℃

Minimum Order: 1 bags

Direct piping type 5-port solenoid valve that is a mainstay of Magster III series. With basic concepts of compact size, large flow, and low power consumption, this high-performance valve has been developed to meet various needs. Solenoid valve with manifold that allows easy maintenance. Individual exhaust type and collective exhaust type manifolds are available to provide multiple functions and meet many different applications Return 453S101C 453S102C 453S202C 453S203C 453S403C 453S404C Hold 453D101C 453D102C 453D202C 453D203C 453D403C 453D404C Closed center 453H202C 453H203C 453H403C 453H404C Center open to exhaust 453J202C 453J203C 453J403C 453J404C Center open to pressure 453I202C 453I203C 453I403C 453I404C Port size Rc1/8 Rc1/4 Rc3/8 Rc1/2 Effective area of valve 10mm2 22mm2 40mm2 Working pressure 0.2～0.8MPa Ambient temp. -5～50℃ Solenoid Rated voltage AC100V,110V,200V,220V(50/60Hz)   DC24V,48V,100V,110V,125V Temperature rise ≦70℃ Insulation class JIS C4003 Class B Power consumption AC:6VA  DC:5W Response time ≦0.03 s ≦0.05 s Operating frequency Max. 4/s Min. 1/month Applicable cylinder size (reference) φ32～100 φ80～140 φ125～180

Minimum Order: 1 bags

Model code Port size Applicable solenoid valve Max. number of valves to be connected   Notes Collective exhaust MVM5F-03-SP1  Rc3/8  Rc1/2 MVS2F-03 MVD2F-03 MVPCF-03 MVPOF-03 MVPEF-03 6 Single manifold base for each valve can be connected with bolt as needed, which allows inspection and exchange of each solenoid valve without disconnection of wiring. OUT port type is for lateral connection for SP1 and bottom connection for SP2.Single-acting, double-acting, and 3-position solenoid valves can be used in combination.　　　　　　　　　　MVM5 , F-03-SP2 MVM5F-08-SP1 Rc3/4 Rc 1 MVS2F-08 MVD2F-08 MVPCF-08 MVPOF-08 MVPEF-084 MVM5F-08-SP2

Minimum Order: 1 bags

Model code Port size Applicable solenoid valve Max. number of valves to be connected  Notes Individual exhaust MVM3F-02-SE1 Rc1/8  Rc1/4 Rc3/8 MVW1F-02 MVW1FR-02 15 Integrated aluminum manifold base that facilitates inspection or exchange of individual valves. NC and NO type solenoid valves can be used in combination.

Minimum Order: 1 bags

Hold Model code MVW7N-04-D MVW7N-08-D MVW7N-14-D Port size Rc3/8 Rc1/2 Rc3/4 Rc1 Rc1 1/4 Rc1 1/2 Rc2 Effective area of valve 70mm2 80mm2 200mm2 220mm2 700mm2 750mm2 800mm2 Working pressure 0.2～0.7MPa Ambient temp. -20～50℃ Solenoid Rated voltage AC100V,110V,200V,220V(50/60Hz)   DC24V,48V,100V Temperature rise ≦80℃ Insulation class JIS C4003 Class B Response time ≦0.03 s ≦0.05 s ≦0.2 s Operating frequency Max. 2/s Attachment position Place the valve with pilot valve in a horizontal position.

Minimum Order: 1 bags

Employing poppet structure for both main valve and pilot valve, this product has achieved optimal resistance to drains and dusts. Incorporated exhaust pressure protection system ensures reliable operation under any piping conditions. Valve system is resistant to transient phenomena at switching, thus decreases air loss Return Model code Normally closed MVW7F-04-S MVW7F-08-S MVW7F-14-S Normally open MVW7FR-04-S MVW7FR-08-S MVW7FR-14-S Port size Rc3/8 Rc1/2 Rc3/4 Rc1 Rc1 1/4 Rc1 1/2 Rc2 Effective area of valve 70mm2 80mm2 200mm2 220mm2 700mm2 750mm2 800mm2 Working pressure 0.2～0.7MPa Ambient temp. -20～50℃ Solenoid Rated voltage AC100V,110V,125V,200V,220V(50/60Hz)   DC24V,48V,100V,110V Temperature rise ≦80℃ Insulation class JIS C4003 Class B Response time ≦0.05 s ≦0.05 s ≦0.18 s Operating frequency Max. 2/s Attachment position As desired

Minimum Order: 1 bags

Hold Model code MVW344N-04-D MVW344N-08-D MVW344N-14-D Port size Rc3/8 Rc1/2 Rc3/4 Rc1 Rc1 1/4 Rc1 1/2 Rc2 Effective area of valve 70mm2 80mm2 200mm2 220mm2 700mm2 750mm2 800mm2 Working pressure 0.2～0.7MPa Ambient temp. -20～50℃ Solenoid Rated voltage AC100V,110V,200V,220V(50/60Hz)   DC24V,48V,100V Temperature rise ≦80℃ Insulation class JIS C4003 Class B Response time ≦0.03 s ≦0.05 s ≦0.3 s Operating frequency Max. 2/s Attachment position Place the valve with pilot valve in a horizontal position.

Minimum Order: 1 bags

Return Model code MVW344F-04-S MVW344F-08-S MVW344F-14-S Port size Rc3/8 Rc1/2 Rc3/4 Rc1 Rc1 1/4 Rc1 1/2 Rc2 Effective area of valve 70mm2 80mm2 200mm2 220mm2 700mm2 750mm2 800mm2 Working pressure 0.2～0.7MPa Ambient temp. -20～50℃ Solenoid Rated voltage AC100V,110V,[125V],200V,220V(50/60Hz)  ,   DC24V,48V,100V,[110V] Temperature rise ≦80℃ Insulation class JIS C4003 Class B Response time ≦0.05 s ≦0.07 s ≦0.15 s Operating frequency Max. 2/s Attachment position As desired

Minimum Order: 1 bags

Intrinsic safety explosion barrier is an explosion-proof device with single channel, shunt-diode DC circuit that enables interactive electric signaling without short circuit while controlling energy transmission in order to prevent ignition in explosive atmosphere. 1.Applicable to Zone 0. 2.When serially connected to a transmission circuit, the barrier protects    the circuit and components in hazardous area from being affected by    a serious accident in the non-hazardous area. 3.Despite in the hazardous location, conventional wiring is available. 4.Intrinsical proof of operational signal is figured out easily and at lower    cost. 5.As SAF3-5 safety barrier has protection circuit, it will be not broken    if you wired in the wrong polarity. 6.SAF3-5 safety barrier employ crimping terminal wiring method. Model code ＳＡＦ3-5 ＭＴＬ728+ Explosion-proof construction Intrinsic safety construction（ExiaⅡB) Intrinsic safety construction（i2G4） Rated voltage ＤＣ24Ｖ±5%- Max. working voltage - ＤＣ25.5Ｖ Max. allowable voltage - ＤＣ26.6Ｖ Safety retention voltage ＡＣ/ＤＣ　250Ｖ Rating of a fuse 50ｍＡ Ambient temp. -20～60℃ -10～60℃ Basic circuit figure Operating condition 1.Place the valve in non-hazardous area. 2. Parts and connections cannot be changed. 3. Use with specified solenoid valves.  4. Allowable inductance for external connection: 10mH / Capacitance: 0.5 μF  4. Allowable inductance for external connection: 1mH / Capacitance: 0.05 μF

Minimum Order: 1 bags

Intrinsic safety explosion barrier is an explosion-proof device with single channel, Zener-diode DC circuit that enables interactive electric signaling without short circuit while controlling energy transmission in order to prevent ignition in explosive atmosphere. 1.Applicable to Zone 0. 2.A-class ground is not necessary since the input and output are insulated    each other. 3.When serially connected to a transmission circuit, the barrier protects    the circuit and components in hazardous area from being affected by    a serious accident in the non-hazardous area. 4.Despite in the hazardous location, conventional wiring is available. 5.Intrinsical proof of operational signal is figured out easily and at lower    cost. 6.SAF100-5 safety barrier employ crimping terminal wiring method. 7.As SAF100-5 safety barrier has protection circuit, it will be not broken    if you wired in the wrong polarity. 8.LED indicates the condition of the input and output Model code ＳＡＦ100-5 Explosion-proof construction Intrinsic safety construction（EｘｉａⅡC) Rated voltage ＤＣ24Ｖ±10% Maximum voltage of a intrinsic safety circuit ＤＣ29.4Ｖ Max. allowable voltage ＤＣ25.95Ｖ Maximum current of a intrinsic safety circuit 93.8ｍＡ Electric power of a intrinsic safety circuit 0.689W Ambient temp. -20～50℃ Basic circuit figure Does not need A-class ground. Operating condition  1.Place the valve in non-hazardous area.  2.Perform single grounding using type A ground.  3. Parts and connections cannot be changed.  4. Use with specified solenoid valves.  5. Allowable inductance for external     connection: 2mH / Capacitance: 0.05 μF

Minimum Order: 1 bags

Return Kind of barrier to combine EｘｉａⅡBT5 SAF3-5 414S302M- , ＹAｉ 414S303M-ＹAｉ 414S603M-ＹAｉ 414S604M-ＹAｉ416S302M-ＹAｉ 416S303M-ＹA

Minimum Order: 1 bags

Intrinsic safety valves can be used for applications that require similar explosion class/ignition degree to d2G4 or Exd II BT5 type (explosion-proof enclosure construction). Without need for expensive connection tools and complex installation work that are inevitable for explosion-proof enclosure types, the intrinsic safety valves achieve highly reliable explosion-proof performance. Return Hold Kind of barrier to combine 454S202C 454S203C 454S403C 454S404C 454D202C 454D203C 454D403C 454D404C SAF3-5 454S202M 454S203M 454S403M 454S404M 454D202M 454D203M 454D403M 454D404M In the case of other explosion-proof barriers and combination *1 Structure of the main valve Pilot spool type Port size Rc1/4 Rc3/8 Rc1/2 Rc1/4 Rc3/8 Rc1/2 Effective area of valve 22mm2 40mm 22mm 40mm2 Working pressure 0.2～0.7MPa Ambient temp. -5～50℃ Explosion-proof standard Intrinsic safety construction Operating condition 1.Use with specified safety barrier 2. For i2G4 explosion-proof valves, use them with MTL728+ safety barrier.　 3.   For Exia II BT5 explosion-proof valves, use them with the safety barrier SAF3-5 or that meets the 4.   conditions described below (note *1). 5.2. Parts and connections cannot be changed. 6.3. Use 1 explosion-proof barrier for each solenoid valve.

Minimum Order: 1 bags