Other Industrial Equipment

Introduction  JOEO ozone aging test chamber through the simulation and enhancement of ozone conditions in the atmosphere, to study the impact of ozone on rubber, and then determine and evaluate rubber resistance to ozone and aging methods, take effective anti-aging measures to improve the service life of rubber products. JOEO Ozone test chamber can be used to test rubber products with static tensile deformation, such as vulcanized rubber, thermoplastic rubber, cable insulation bushing, etc. The test pieces were exposed to the airtight air in the ozone chamber with no light, constant ozone concentration and constant temperature at a predetermined time, and the surface cracks and other properties of the test pieces were observed to evaluate the ozone aging resistance of the rubber. JOEO Ozone test chamber is widely used in product quality control in measurement quality control. Rubber and plastics; Automobile production; Wire and cable; Packaging materials; Instruments and meters; Medical equipment; Civil nuclear energy; Civil aviation; Institutions of higher learning; Research laboratories; Inspection arbitration, and technical supervision departments such as rubber products If you need more models about our test equipment, please reference our chamber- testing（.）com   Features Stainless steel inside and outside for ozone testing room Made of iron with powder coating on the outside Durable ozone generator (ozone laboratory) The insulation material is high-density glass fiber cotton The bottom is a universal round wheel and fixed feet The window material is multi-layer tempered glass, and the interior is conductive with chips Refrigeration compressor oil pressure protection Lack of reverse phase protection system. Overload protection of circulating fan motor

Minimum Order: 1 bags

Application JOEO blowing sand and dust test chamber is capacity of 1000 liters. Considering that some specimens are smaller, following the marketing demand and customer required that we designed and produced this small sand and dust chamber. Feature ASTM B117 chamber JOEO dust sand test chamber dust proof chamber is made for the simulation of dust and sand conditions. These sand and dust chamber used to test the exposure of test the exposure of automotive and electronic components under extreme environmental conditions in order to validate product seal.Dust ingress test methods included IEC60529, ISO20653 and many others. The airflow circulates upward from the bottom, blowing the dust circulation,forcing dust around the specimens. All models are upgrade to programmable controller and Ethernet access that provides simple operation and control.If you need more models about our test equipment, please reference our chamber-testing（.）com Blowing sand and dust test chamber door attached to the window, the door to the lower part of the electrical control area,Simulated sand dust of talc in the lower hopper of the test chamber. Use the of circulating fan and automatic jar will be blown into the upper network studio talcum powder through a 75 micron square hole,The test space form high density dust shape, test specimen.

Minimum Order: 1 bags

DESCRIPTION How can you make sure that aeronautical materials and components function properly even at high altitudes? Airplanes are designed to fly over land and water carrying people and goods, reaching very high altitudes and withstanding shocks and turbulence. For this reason, the reliability of their components and materials is - literally - of vital importance! You need to make sure that any elements function properly at high altitudes and withstand sudden changes in pressure. If you need more models about our test equipment, please reference our chamber- testing（.）com JOEO solutions for altitude testing To meet all testing needs, the range of JOEO altitude chambers is available in both thermostatic (temperature and pressure control) and climatic (temperature, pressure and humidity control) versions.   Structure: Heated inspection window: a fully transparent double heating film allows the test compartment to be easily and clearly inspected and prevents condensation from forming on the glass. Self-levelling feet with excellent adherence and stability. Rounded corners allow better drainage of condensation drops and easy cleaning. A simple and reliable cooling

Minimum Order: 1 bags

Application JOEO humidity control chamber are designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance, suitable for quality control of the industries of electron, electrical equipment, ,LED, ic chips, vehicle, metal, foodstuffs,plastic products, chemistry, building materials, luggage, adhesion tape, printing, packaging, etc.If you need more models about our test equipment, please reference our chamber-testing（.）com Description JOEO humidity control chamber temperature control air ducts are designed as double air ducts, connected to the studio but isolated. The path of the wind is in the form of wind return, the partition plate is made of high-quality stainless steel plate cold bending, and the outlet adopts adjustable louvers. The temperature control duct is provided with indirect heater, saturated wet air inlet, refrigeration dehumidification evaporator and circulating air supply wheel Features  Humidity control chamber body adopts an arc shape, the surface is treated with matte stripes, and the flat non-reaction handle is adopted, which is easy to operate, safe, and reliable; The box adopts rectangular multi-layer glass viewing window, which can be used to observe the test items during the test. The window is equipped with an anti- sweat electric heater device to prevent water vapor from condensing and water droplets, and high-brightness PL fluorescent lamps keep the constant climate chambers interior of the box illuminated; The double-layer insulation of the box door is tight and airtight, which can effectively isolate internal temperature leakage. With an external water supply system, it is convenient to supplement the water supply of the humidification barrel, and it can be recycled and used automatically; The compressor circulation system adopts the French “Taikang” brand, which can effectively remove the lubricating oil between the condenser tube and the capillary tube, and the whole series adopts environmentally friendly refrigerants (R23, R404, R507); Humidity control chamber's controller adopts an imported LCD screen, which can display the measured value, set value, and time at the same time; The controller has multi-segment program editing and temperature, and humidity can do fast (OUICK) or slope (SLOP) control; The built-in moving pulley is easy to move and place and has a strong positioning screw to fix the position.

Minimum Order: 1 bags

Applicable  JOEO Cyclic corrosion salt spray chamber,salt spray chamber is tested the corrosion resistance capacity of products, which stay in the intense change environment, such as automobile parts, aviation equipment, photographic equipment, building materials, electricity, electrical and electronic systems. Structure Cyclic Corrosion Salt Spray Chamber adopts 5mm or 8mm imported gray and white impact resistant P.V.C board, with high temperature resistance up to 85℃ and corrosion resistance.  Support frame: ¢ 10MM fiberglass rod, corrosion resistant. The steel V-frame and the fiber rod angle are placed to ensure the specimen is inclined at 15-30 degrees.If you need more models about our test equipment, please reference our chamber-testing（.）com   Pressure barrel is welded seamlessly with 2.0mm SUS304 stainless steel plate

Minimum Order: 1 bags

Application JOEO Walk in xenon lamp aging test chamber,xenon test chamber,xenon arc test chamber,Walk in xenon chamber,xenon light fastness tester adopts xenon arc lamp that can simulate the full sunlight spectrum to reproduce the destructive light waves existing in different environments, which can provide corresponding environmental simulation and accelerated test for scientific research, product development and quality control, xenon lamp test, also known as the "solar radiation protection test," is divided into three types based on test standards and methods. Air cooled xenon lamp (LP/SN-500), water cooled xenon lamp (LP/SN- 500), and desk xenon lamp (TXE) are indispensable testing instruments in the aging test chamber series. JOEO xenon arc chamber,light fastness testing machine,xenon arc lamp aging test chamber is mainly used in automobiles, coatings, rubber, plastics, pigments, adhesives, fabrics, aerospace If you need more models about our test equipment, please reference our chamber- testing（.）com Structure: JOEO walk in xenon aging test chamber the outer cavity is made of 1.5mm thick cold-rolled steel plate, brushed and polished, and high temperature paint treatment, which is not easy to scratch. The door body is sealed by double-layer silicone sealing material with good sealing effect. Xenon lamp aging test chamber the inner chamber is fully welded from 1.2mm thick SUS304 stainless steel plate. The advantage of full welding is good sealing and not easy to crack. Observation window is 4 layers of tempered glass, window size can be customized according to customer requirements. The insulation material is made of polyurethane automatic mechanical foaming, and the thickness of the insulation layer is 100mm. Advantages  Ventilation and cooling device: the temperature ventilation and cooling system of the test chamber is automatically controlled by the temperature controller, and the cooling system is used in the test chamber for cooling. Control blackboard thermometer using wired transmission technology, effectively improve the control accuracy. Large carrier: The JOEO xenon arc weathering test chamber has a large test chamber space, which can accommodate multiple samples, and the test efficiency is high. The use of optical fiber transmission to measure the radiation intensity of xenon lamp, to avoid the measurement error caused by temperature. Device: In order to record the working time of each test, the device is equipped with a timer on the operation panel, which can control the time of the device, and the device will automatically shut down after the time is finished. Protection device: In order to make the xenon arc lamp work normally without damage, the xenon lamp is automatically extinguished when opening the door, and the whole machine stops working

Minimum Order: 1 bags

Application Temperature humidity and vibration test chamber conforms to the national standard and meets the specific test requirements. Through the combination of high and low temperature, low temperature, temperature change, shock, wet and thermal vibration and other environmental reliability tests, widely used in electronic and electrical products, auto parts, materials and so on Feature The insulation material is fireproof and high strength PU polyurethane foam insulation material. High precision perfect appearance design, the external use of double-sided cold rolled plate electrostatic powder coating material, the internal use of SUS#304 high temperature stainless steel. The control system and control circuit components are made of well-known brands.If you need more models about our test equipment, please reference our chamber-testing（.）com The introduction of Japan, Germany advanced refrigerator control technology, energy saving more than 20%. Application Temperature humidity and vibration test chamber with suitable vibration test bench can meet the requirements of temperature, humidity and vibration test. The three integrated test system has been widely used in aviation, aerospace, ship, electrical, electronic, communication and other fields.

Minimum Order: 1 bags

Description JOEO UV Test Chamber,uv testing chamber,uv test machine,uv light test chamber,uv aging test chamber can reproduce the effects of sunlight, and the condensation and water spraying system can reproduce the effects of rain and dew. The radiated energy and temperature can be controlled throughout the test cycle. A typical test cycle is usually ultraviolet light exposure at high temperature and relative humidity in a 100% dark wet condensation cycle. JOEO uv weather resistance test chamber, uv weathering chamber,light fastness tester is suitable for non-metallic materials sun resistance test and artificial light source aging test. This product can simulate the damage and oxidation caused by the product under the conditions of sun, rain, moisture and dew, including bleaching, discoloration, brightness decrease, powder, cracking, blurring, brittleness, strength decrease, etc. Typical applications in paint and coatings, automotive industry, plastic products, wood products and other industries Features： Original UVA or UVB lamps from the United States ensure comparability of test results. We have independent intellectual property rights and are the first in China. Our ballast can extend the lifespan of the lamp tube to 6000 hours, greatly saving users on usage costs. The high-precision Pt 100 temperature sensor on the blackboard automatically controls temperature. The operator can freely set different programs. Touch screen control, user- friendly interface, allowing users to view any parameters during the testing process.If you need more models about our test equipment, please reference our chamber-testing（.）com Real time data collection and storage, all test data automatically converted to Excel format for storage. JOEO uv weather test chamber with a TCP/IP Ethernet interface, users can remotely control the BUV through a TCP/IP network. Equipped with a booster pump, even if the outdoor water pressure is not enough, the BUV can still work normally with this booster pump.

Minimum Order: 1 bags

Application Mainly used in aviation, aerospace, military units, electronics, IT industry and other test products in the surrounding atmospheric temperature changes under the condition of rapid change in the basic safety test of electronic components, parts and products (whole machine) to provide reliability test, product screening, and so on, at the same time through this test, product quality control. Meet Standards GB/T 2423.1 (IEC60068-2-1);GB/T 2423.2 (IEC60068-2-2);GB/T2423.22;GJB 150.3A; GJB 150.4A; GJB 150.5A;GB/T10589; GB/T10592;GB/T11158.If you need more models about our test equipment, please reference our chamber-testing（.）com DESIGN FOR THIS THERMAL SHOCK TEST CHAMBER  JOEO thermal shock test chamber because of its excellent performance and reliability, has become the country's leading products, its export quantity is far ahead, favored by the international market, as thermal shock test chamber manufacturers, JOEO will continue to uphold the concept of innovation, quality and customer first, to provide partners with more advanced and more reliable products and services. JOEO  Thermal shock test chamber (Two Zone) is suitable for testing equipment for solar photovoltaic modules, batteries, automotive parts, LED optoelectronics, semiconductors, aerospace, automobiles, home appliances, scientific research, etc., for testing and determining electrical, electronic and other products and materials. Parameters and performance of temperature and environmental shock changes in high and low temperature tests. Thermal shock test chamber (2 Zone) structure can be divided into two parts.  1.High temperature tank (preheating zone); 2.Cryogenic tank (pre-cooling zone).

Minimum Order: 1 bags

Application JOEO professional Walk In ess chamber controlled environmental chambers temperature cyclic stress screening is to change the external environmental stress by using the temperature acceleration technique (the product produces alternating expansion and contraction when circulating in the upper and lower extreme temperatures) under the design strength limit, so as to generate thermal stress and strain in the product. Feature Walk In ess Chamber simulate rapid temperature transition rates for faster product temperature changes based on your testing requirements – testing your products and yielding defects faster. feature enhanced air flow with larger compressors for change rates to 15C/min and higher. JOEO climatic test chamber support reach in, walk in, drive in and custom fast change rate test chambers that are designed for your specific.If you need more models about our test equipment, please reference our chamber-testing（.）com Can set the temperature variable rate of the different stress screening Can perform a rapid temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc. Meet requirements of stress screening test（ESS Test） for electronic equipment Test methods:Switching temperature & average temperature Support variety of stress screening (fast temperature change rate) 5deg C/min,  10deg C/min,  15deg C/min experimental conditions Meet Standards for electronic equipment MIL-STD-2164, MIL-344A-4-16, MIL-2134A- 19, NABMAT-9492, GJB-1032-90, GJB/Z34-5.1.6, IPC-9701....ETC. Have 2 test methods:          ①temperature test           ②average temperature test   With aluminum sheet test machine load capacity (non plastic load) Single machine can perform fast temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc. Following sample load customized with a large ESS Chamber Built in two-way USB2.0 portable storage interface (can copy the test curve and load the test program) Complete real-time test curve analysis shows that no time limit Can be integrated with the E management system to monitor the management system Multi-language selection: Chinese, English, Russian, Korean, Japanese, German  multilingual language switching.

Minimum Order: 1 bags

Application    JOEO factory altitude simulation chamber is designed to allow users to perform temperature, humidity, and altitude condition tests in a combined test chamber, and create multiple conditions to meet multiple test requirements at the same time.If you need more models about our test equipment, please reference our chamber-testing（.）com   Designed to simulate altitude conditions up to 100,000 feet.  Provides simultaneous temperature/altitude testing from site altitude to 65,000 feet for high altitude test chamber testing.  Humidity test can only be performed at the altitude of the site.  Heated inspection window to ensure that the test room is clearly visible. Details: Meets international standards DO160, ASTM, MIL-STD-781, -810 High altitude chamber up-to 150,000 feet Temperature range -70°C to +180°C, Humidity range 20 to 95% Feature High Altitude Chamber Testing of avionics or other aerospace equipment to simulate actual conditions it might experience. Simulation of high-altitude conditions like might be found in mountainous regions. High altitude chamber are used for autom otivetests to simulate mountainous conditions and totest computers, electronics and packaging materials that may be shipped via airfreight. It is especially important for defense and aerospace applications where pressure and vacuum conditions are even more intense. These chambers are JOEO company's most classic test chamber. JOEO (temperature/altitude) and ACC-Series (temperature/altitude/humidity) chambers are designed to allow the userto perform temperature, humidity. and altitude condition testing in one combined test chamber More than one condition can be created simultaneously to satisfy many types of test requirements.

Minimum Order: 1 bags

Battery Walk In Test Chamber JOEO Walk In Test Chamber's temperature cyclic stress screening is to change the external environmental stress by using the temperature acceleration technique (the product produces alternating expansion and contraction when circulating in the upper and lower extreme temperatures) under the design strength limitation, so as to generate thermal stress and strain in the product.If you need more models about our test equipment, please reference our chamber-testing（.）com It can set different stress screening temperature change rate 5℃/min,10℃/min,15℃/min,20℃/min  Wa , lk In test chamber(ESS chamber) is suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature cycling & temperature stress screening (ESS) test and constant humidity and cyclic damp heat test. Meeting standards MIL-STD-2164, MIL-344A-4-16, MIL-2164A-19, NABMAT-9492,GJB-1032-90, GJB/Z34- 5.1.6, IPC-9701 SAFETY IN THE LABORATORY AND PROTECTION OF THE STAFF During the temperature tests, overchargings or malfunctions of the batteries may occur. This can lead to the destruction of the batteries. Increasing storage sizes cause increasing impacts of possible failures and potential risks during tests with lithium batteries. For this reason, safety in the laboratory, in particular the protection of the staff, during such tests has the highest priority. To assure this safety in your lab chamber during tests with lithium batteries in a temperature- or environmental humidity chamber, we can offer safety devices. Here, JOEO Battery Walk In Test Chamber following customers demand that the safety test chambers can be adapted individually,  Please feel free to inquiry from us online!

Minimum Order: 1 bags

JOEO Walk In Salt Spray Chamber is different from basic salt spray test chamber.Walk In Salt Spray Chamber exposes sample to a series of different environments in repetitive cycles that incorporate temperature , humidity, salt spray and dry.  Accelerated corrosion test methods included ASTM B117, ASTM BG85, ISO9227, IEC60068-2-52, iec61701-2, ISO7253 and many others. Test Object: battery pack andsystem. Refer GB/T4 part 5.5.2 test method, test according to GT/T2423.17 test conditions.If you need more models about our test equipment, please reference our chamber-testing（.）com The salt solution was made up with sodium chloride (chemically pure and analytically pure) and distilled or deionized water，Its concentration is (5 + 1)% (mass fraction). (35 ± 2) ℃, the measured pH value is between 6.5-7.2. Placed the test objects in the salt spray chamber for cycling test. Each cycling duration for 24h. Spray salt solution to the test object for 8 hours under the temperature of (35± 2) ℃ , remain for 16 hours. Between the forth and the fifth hour in one cycles should be according to test requirement in GB/T 28046.1-2011, test mode with 3.2. Total 6 cycles testing. Salt Spray Chamber is not necessary for the test objects being installed in passenger, luggage or cargo compartments.

Minimum Order: 1 bags

Application JOEO ESS Chamber suitable for testing the quality of electronic, electrical, communication, instrumentation, vehicles, plastic products, metal, food, chemical, building materials, medical, aerospace, and other products. If you need more models about our test equipment, please reference our chamber- testing（.）com Description (ESS Chamber) Rapid rate temperature test chambers are meant to test the durability of your product for long-term storage or operation in these environments. Temperature cycling between high and low temperatures will create accelerated thermal fatigue of solder joints, seals, and connections in your product. The ramp rate of the chamber is 3℃/min, 5℃/min, 8℃/min, 10℃/min, 15℃/min, 20℃/min, linear or non-linear type.  As a professional Rapid Temperature Change Test Chamber in China, We can provide you with different types of high quality climatic test chamber.

Minimum Order: 1 bags