Other Industrial Equipment

★Description GT-YBDJ201 Single chamfering machine is a terminal pin production machine. The machine with auto feed material, auto chamfer one end of terminal pin. ★Main details 1.Auto feed pin, auto chamfer. 2.Angle of chamfer can be adjust. 3.Machine with small design, easy operation.

Minimum Order: 1 bags

GTPG- (1-8) group buffing machine, mainly to meet the different requirements of surface finish of the heaters by heater factories. There are 1 - 8 groups buffing machines to choose. Polishing wheel is driven by motor high-speed rotation. The pressure wheel is driven by another motor through the reducer. The diameter can be adjusted conveniently, and the axis inclination of polishing wheel can meet the needs of different tube diameter.

Function: The machine combine with different functions on one machine. For example, machine combine pull plug + cut pin, machine combine trim+cut pin, machine combine cut pin+ pin chamfering, machine combine stretching+cut pin; To make sure machine maintain easy and with high efficiency, recommend machine with 2 functions on the machine. Main features: *** Max length of heater: 1000mm or according to order; *** Diameter to process: according to order; *** Function of the machine: 2 function according to order, such as pull plug+cut pin, trim+cut pin, cut pin+pin chamfering. *** Auto feed material, auto work, auto unload. Application: Tubular heater production; Information need for order GT-MF01 Pull Plug + Cut Pin Machine : *** Diameter of heater, such as 8mm; *** Max length of heater, such as 1000mm (Recommend heater within 2000mm) *** Function need, such as plug + cut pin; *** Electrical supply (for example, 1 phase in 220v , 3 phase in 380V, 50hz)；

Minimum Order: 1 bags

GT-LS202 Semi Auto Stretching Machine use to stretch long tubular heaters after shink, to let all heaters in same length. Function: Stretching heater after shrink, to make all heaters in target length. Main features: 1. auto or manual load heater, auto stretch, auto or manual unload finished heater; 2. with touch screen, easy debug the machine; Application: Tubular heater production Information need for order GT-LS202 Semi Auto Stretching Machine（for long heaters）: ** Diameter of heater; ** Length of heater, If for long heater, recommend load and unload heater by manual; ** Electrical supply (for example, 1 phase in 220v , 3 phase in 380V, 50hz)；

Function: Reduce heater to increase density; Main features: 1. whole casting for body of the machine, ensure stable use in future.; 2. According to different diameters and orders, can make in uniform speed or un- uniform speed; 3. change related rollers can reduce different diameters heaters; 4. When the heater is blocked, the machine will automatic shutdown; 5. with small size, less noise, easy adjustment; 6. suitable for different materiall metal tubes; 7. change rollers, can reduce round, square, flat heaters. 8. can make in 12 station, 16 station, 18 station and 21 station. Application: Round heater reduce, such as tubular heater, cartridge heater, cable heater; Oblate heater reduce, such as railway heater reduce, fryer heater; Information need for order GT-JY16 roll reducing machine: Tube diameter before and after reduce, such as Φ10-8.5mm Length before reduce； Electrical supply (for example, 1 phase in 220v , 3 phase in 380V, 50hz)； speed: uniform speed or un-uniform speed;

Minimum Order: 1 bags

Straighten the coil tube auto, and auto cut the tube according to the length need. Machine suitable for coil copper tube, aluminum tube to straight and cut. Application: Copper coil tube straight and cut, such as copper water heater produciton. Main Data: 1. Suitable OD of tube: Φ4-Φ19mm; 2. Wall-thickness: 0.2-2.0mm; 3. Feeding speed: 0-60mm/min; 4. Cutting method: rotary cutting; 5. Min length to cut: 25mm; 6. Power supply: 3phase 380V, 50HZ or according to order; 7. Air supply: 0.4-0.8Mpa clean compressed air; Information need for order GT-ASCT19 auto coil tube straightening and cutting machine: Tube diameter to cut Length to cut Electrical supply (for example, 1 phase in 220v , 3 phase in 380V, 50hz)

Minimum Order: 1 bags

★Description Auto tube cutting machine use to cut tubes for heating elements autocratically.Mainly for heater production in large production. Suitable for copper pipes, iron pipes, stainless steel pipes, aluminum pipes, etc. ★Main details 1.Auto feeding, cutting, pipe breaking, and auto unload tubes. 2.Can cut two different length. 3.Only need to manual put the tubes on the rack, and take the finished cut tubes. One person can take care of several machines. 4.Quality pneumatic rotary chuck, to clamp the tube more stable. 5.With touch screen, easy operation. 6.Actions are controlled by time, easy to operate and less failure. 7.Tubes with few burrs after cutting.

Minimum Order: 1 bags

This cartridge heater filling machine is to fill MGO powder directly.Before to fill MGO powder, it need to cover the bottom of the tube first, then hand the resistance coil on the machine, and fill MGO powder directly. Information need for order for Cartridge heater filling machine: *** length to fill; *** diameter to fill (diameter should be larger than Φ9.5mm); *** wall-thicnkess of the tube to fill; *** max OD of resistance wire spiral and how many resistance coil; *** size of terminal pin; *** Electrical supply (for example, 1 phase in 220v , 3 phase in 380V, 50hz)

Minimum Order: 1 bags

Mora Calibration serve customers from a variety of industries, including Aerospace, automotive, electronics, industry, Wind Energy, Solar Energy, Oil and Gas Pipeline, Power Transmission, Utilities, Natural Gas. We offer a comprehensive line of quality industrial components and are well known for our broad range of Calibration Instruments, Dimensional Measuring Tools, Electrical Test Instruments, Environmental Testing, Process Instruments, Recorders/Data Loggers, Temperature Measurement, Power Quality, Torque, Preventative/Maintenance contact us www.moracalibration.com

Minimum Order: 1 bags

Cartridge heater shrining machine use to shrink cartrige heaters to small diameters, to increase density. There are two kinds of shrining machine for cartridge heaters: swaging machine and roller reducing machine. Swaging machine suitable for many different diameters and in small quantity. Roller reducing machine suitable for single diameter in bulk quantity. Depend on the length of cartridge heaters, there are common rolling reducing machine and short cartrige heater reducing machine. We improved the GT-SW30 swaging machine in new design as below. Which is easier for maintain in future.

Minimum Order: 1 bags

Mora Calibration serve customers from a variety of industries, including Aerospace, automotive, electronics, industry, Wind Energy, Solar Energy, Oil and Gas Pipeline, Power Transmission, Utilities, Natural Gas. We offer a comprehensive line of quality industrial components and are well known for our broad range of Calibration Instruments, Dimensional Measuring Tools, Electrical Test Instruments, Environmental Testing, Process Instruments, Recorders/Data Loggers, Temperature Measurement, Power Quality, Torque, Preventative/Maintenance contact us www.moracalibration.com

Minimum Order: 1 bags

Pressure generated by built-in pump and controlled automatically from 90% vacuum to max pressure Pressure measured with external pressure modules (ADT160 series) to 10,000 psi (700 bar) 0.02%FS Fully temperature compensated 0.005%FS Fully Automated pressure calibration Task preset and auto run Auto step User friendly interface Intuitive icon driven menu structure Measure mA or V with 0.01% RD 0.005%FS accuracy Source 0 to 22mA current 24 VDC loop power supply to pressure transmitter during test Automatic switch test Up to 30V misuse protection on any two sockets 7 LCD color screen (800X480) Task management capability Internal memory stores 120 tasks Download tasks and upload results Support HART instrumentation Rechargeable battery with up to 8 hours operation between charges contact us www.moracalibration.com

Minimum Order: 1 bags

Pressure ranges from Vacuum through 2 000 psi (140 bar) Accuracy better than 0.015 % of reading. (Increased accuracy option of 0.008 %) Gas operated with optional hand pumps Dual vacuum/pressure models available Psi, bar, kgf/cm2, kPa and MPa ranges available Piston/cylinder design provides stability and repeatability Built-in pneumatic hand pumps for pressure and vacuum High quality needle valves provide optimum control Mounted spirit level and adjustable feet Test station design with O-rings eliminates the need for PTFE tape or wrenches Improved case with springloaded latches for hood Sturdy weight box with hinged lid and side handles for easy transport contact us www.moracalibration.com

Minimum Order: 1 bags

Pressure ranges from Vacuum through 2 000 psi (140 bar) Accuracy better than 0.015 % of reading. (Increased accuracy option of 0.008 %) Gas operated with optional hand pumps Dual vacuum/pressure models available Psi, bar, kgf/cm2, kPa and MPa ranges available Piston/cylinder design provides stability and repeatability Built-in pneumatic hand pumps for pressure and vacuum High quality needle valves provide optimum control Mounted spirit level and adjustable feet Test station design with O-rings eliminates the need for PTFE tape or wrenches Improved case with springloaded latches for hood Sturdy weight box with hinged lid and side handles for easy transport contact us www.moracalibration.com

Minimum Order: 1 bags