Health & Beauty

Huicheng disposable clothing disinfection aseptic AAMI American Standard Product Description Disposable Medical Gowns are medical clothing for doctors during surgery. The product is refined from nonwovens as the main raw material. It has good air permeability, bacteria resistance and water resistance. The general style design is that there are two bags at the neck and waist. When wearing, wear them backwards. Fasten the belt and put on gloves. The main function of wearing disposable clothes is to isolate bacteria and eliminate infection, which can protect doctors from infection, so as not to cause secondary infection to patients. The medical grade (sterilization+) of clothing is divided into 1-4 grades. The minimum gram number is 45g. The higher the grade, the stronger the protection. It is packaged and disinfected separately. The fabric used in clothing belongs to medical shielding fabric, mainly focusing on barrier performance. Barrier properties include the ability to prevent the penetration of liquids and microorganisms. It has certain adsorption function and water pressure resistance. In addition, the clothes shall also meet other requirements such as comfort, flame retardancy, antistatic, and etc.

Disposable medical protective clothing 55g/65g adhesive strip microporous protective clothing Product Description Peritoneal non-woven protective clothing: airtight, waterproof, good bacteria isolation effect, with obvious distinction between positive and negative sides. The side in contact with the body is non-woven clothing, which is not allergic and feels good. There is a layer of plastic film outside to prevent liquid leakage. It is used in occasions with pollution and virus. The hospital infectious disease room mainly uses film coated non-woven protective clothing. SMS non-woven protective clothing: three layers of composite non-woven fabric, with a waterproof and bacteria isolation layer in the middle and a PP non-woven fabric with sesame dot pattern in the outer layer, which is strong, tensile and has the function of bacteria isolation, waterproof and breathable. It is generally used in 100000 grade purified environment such as bacterial culture laboratory and sterile surgical operating room. Breathable membrane non-woven protective clothing: bacteria isolation, waterproof, slightly breathable, soft texture, is the most advanced medical protective clothing for medical protection. The inner layer is 40g high-grade filament non-woven fabric, and the outer abdomen is provided with a 20g unidirectional breathable PE film. Its characteristic is that the sweat of the human body can be emitted, while the harmful gas and water outside can not invade.

Disposable PPE gowns is an anti-bacteria and waterproof medical clothing. In addition to the fact that the clothes themselves can not become a source of dust emission, they also have the effect of preventing dust emission from the human body. At the same time, as aseptic clothes, they should have basic properties such as safety protection, comfort, operation convenience and aesthetics in materials and design. They are mainly medical, including outpatient clinics, wards and inspection rooms of medical institutions, as well as doorkeepers, street offices, communities, traffic checkpoints Special environmental protection, rescue protection, outdoor construction protection, agricultural and animal husbandry protection, pharmaceutical science protection and survey protection. Style of Disposable PPE Gowns PP + PE disposable isolation clothing (with adhesive strip), lace up type. Threaded cuffs;

Multispectral Image Data The GP satellites of JL1 constellection have 26 spectral channels, covering optical remote sensing data from visible light to long wave infrared. Features of Multispectral and Hyperspectral 1.Ultra wide width, ultra-high radiation quality.  2.Ultra-high information resolution. MULTISPECTRAL DATA PARAMETERS Indicators Parameter Substar point ground pixel resolution Visible light near infrared:5m; Shortwave/Mediumwave infrared camera:100m; Longwave infrared camera:150m Spectral bands B0:450nm-800nm        B1:403nm-423nm B2:433nm-453nm        B3:450nm-515nm B4:525nm-600nm        B5:630nm-680nm   B6:784.5nm-899.5nm     B7:485nm-495nm         B8:615nm-625nm        B9:650nm-680nm         B10:698.75nm-718.75nm  B11:732.5nm-747.5nm B12:773nm-793nm       B13:855nm-875nm       B14:660nm-670nm       B15:677.5nm-685nm       B16:750nm-757.5nm      B17:758.75nm-762.75nm B18:935nm-955nm       B19:1000nm-1040nm     SW1:1195nm-1225nm    SW2:1360nm-1390nm   SW3:1550nm-1590nm    SW4:1610nm-1690nm MW:3700nm-4950nm     LW:7500nm~13500nm Standard scene size (at nadir) Visible light near infrared:58.7km×58.7km Shortwave/Mediumwave infrared camera:64km×64km Longwave infrared camera: 96km×96km Positioning accuracy 50m (CE90) Photographic mode Push-broom Photographic satellite GP01; GP02 As a satellite factory, we can offer kinds of satellite data products for sale, if you have needs, please contact us.

Minimum Order: 1 bags

Jilin 1 satellites can not only capture the images of the earth, but they can also turn the cameras to photograph space objects, such as the space station, the moon and other objects near the earth. Features of Lunar Satellite Images 1.It can be used for astronomical target observation. 2.Short-range artificial target observation. LUNAR SATELLITE IMAGES PARAMETERS Indicators Parameter Angular resolution 0.35 angular sec Standard duration 10s; 30s; 60s Maximum duration 120s Frame rate SP03-08:1/2/5/10 frame /s GF03C:1/2/5 frame /s (minimum 0.1, freely set) Standard field of view size SP03-08:1.1×0.5° for Single camera (SP04~08 is spliced by double cameras, and it is about 2.1×0.5°) GF03C series:1.5×0.6° Video image stabilization accuracy ≤0.5 pixel Maximum angular velocity of maneuvering imaging ≥ 1°/s Highest recognized magnitude SP03-08:12 magnitude GF03C series:10 magnitude Shooting satellite SP03-08; GF03C series If you want to know more types of commercial satellite, please contact us.

Minimum Order: 1 bags

KRD16 series shock test system is a standard testing machine stipulated by the high impact shock test method and meets MIL-S-901D standard which covers shock testing requirements for shipboard systems, equipment, machinery, and structures. The high-impact shock test system is designed to verify the ability of shipboard installations to withstand shock loadings which may be incurred during wartime service due to the effects of underwater explosions, bump impacts, close range shots, air explosions, train coupling loads, etc. It can not only perform shock assessment tests on ship equipment in accordance with military standard requirements but also can be used to test and study the shock performance of various shock absorbers and structures. It played an important role in improving the shock resistance of ship equipment. FEATURES OF KRD16 HIGH ENERGY SHOCK TEST SYSTEM CME provides lightweight & medium weight high impact shock test systems in accordance with one of the following test categories, as specified. Lightweight. The lightweight test is a test performed on the lightweight shock machine. The weight of the specimen including the fixture to attach it to the test machine shall be less than 250kg (550 pounds). Medium weight. The medium-weight test is a test performed on the medium-weight shock machine. The weight of the test item including the fixture to attach it to the test machine shall be less than 3357kg (7,400 pounds). TECHNICAL SPECIFICATIONS OF KRD16 HIGH impact testing equipment. Model KRD16-1 KRD16-2 Parameters Lightweight Medium weight Max Load (kg) 200 3000（Including fixtures≤3400） Pendulum Mass (kg) 181 1342 Shock Form Preset energy automatic completion Drop Hammer Height (mm) 0-1500 0-1870 Work Table Size (mm) 4A (Flat plate) 860×570 1520×1520 4C-Ⅰ (Angle plate) 670×300 4C-Ⅱ (Angle plate) 670×300 4C-Ⅲ (Angle plate) 670×550 Overall Dimension (mm) 4800×1400×4400 3650×3300×3200 Weight(kg) 3500 15000 Power AC380V±10％50Hz 3kW AC380V±10％50Hz 20kW Working Environment Temperature range: 0～40℃, humidity≤80% (no condense) Standards MIL-S-901D MIL-STD-202 TABLE OF KRD16 HIGH IMPACT SHOCK TEST SYSTEM The lifting mechanism is used to raise a heavy hammer to a predetermined height and then make it fall freely, and hit the cutting board on which the specimen is installed, so that the specimen bears a complex shock load, thereby determining the specimen's ability to withstand shock. The lifting system is composed of an electric-reduction unit, high-strength chain, hook, rotating arm, vertical guide track, vertical limit lever, swing hammer angle indicator plate, etc. Two shock hammers (horizontal hammer and vertical hammer) that can move in different directions enable the equipment to easily realize three-directional shock motion. Or you can buy drop test machine from us.

Minimum Order: 1 bags

JQ Care Isolation Gowns are designed to help professionals achieve a neck to knee coverage every time in health care settings. The gowns are used to protect the wearer from the spread of infection or illness if the wearer comes in contact with potentially infectious liquid and solid materials. They may also be used to help prevent from transferring microorganisms that could harm vulnerable patients, such as those with weakened immune systems. What Material Can Be Used for Isolation Gown? Disposable isolation gowns for sale are commonly made from these materials: Polypropylene (PP) Spunbond polypropylene + meltblown polypropylene+ spunbondpoly propylene (SMS) Polyethylene (PE) Polypropylene + Polyethylene (PP + PE). Or you may be interested in reinforced surgical gown.

Minimum Order: 20 square metres

JQ Care offers various type of disposable caps-Bouffant, Clip , Astronaut and Surgical Cap。They are used to act as barriers to prevent microorganisms and hairs may cause pollution problems at workplaces. Different designs protect user in different ways. There is a big need of disposable medical caps and headcovers in medical facilities and other dust free required workshops, such as food,laboratory, electronic, pharmaceutical and cleaning industries, especially during pandemic. Besides, going disposable can be great for business and cost-effective because you don't have to launder any fabric. Why Do We Wear Head Protection Cap? The head protection cap is designed to protect people's face and head when they are in dangerous situation. Why Do We Wear ppe head cap? The material of head protection cap is soft, wear-resistant and breathable. It won't cause any burden to the user. The head protection cap is used in many working places such as construction site, shopping mall, factory etc. Or you may be interested in nitrile industrial gloves.

Minimum Order: 20 square metres

In any professional setting you will find multiple reasons to use gloves. Normally one glove may not serve well for all applications. To optimize performance with cost efficiency and access the appropriate level of infection or hazardous protection, you will need to match the kind of glove to your intended activity. JQ Care provides a comprehensive range of disposable gloves ppe- clear Vinyl, stretch vinyl, nitrile, synthetic and latex gloves with various levels of protection. You can rely on the quality of our gloves that comply with all relevant industry standards. We divide our gloves by medical or industrial grade following the user specific working environment. Our medical grade gloves hand protection include surgical and examination gloves. Clear Vinyl, stretch vinyl, nitrile, synthetic and latex gloves can be applied in medical examination and industrial area use. We provide latex gloves mainly for medical examination and surgical use. The user's comfort is our top priority, we are here to help you find the right material and size every time! What Are The Disposable Gloves Used For? Disposable gloves should be changed for a short time use, universally considered as a tool for maintaining hygienic conditions, ensuring the security of patients and caregivers, and safeguarding against infections. Every professional should wear gloves when she or he may be expososed to blood, body fluids, secretions or excretions and when handling contaminated equipment. What Are The Disposable Gloves Used For? The use of gloves minimizes the possibility of infection, pathogens, and other external factors in medical care industries. These safety gloves protect both the individuals who use them as well as the patient. Disposable gloves are also widely used in industrial area, for example, food processing, electronics, automotive part and other precise instruments manufacturing, avoiding the contamination of dusts or any other hazards and therefore help to keep the finished product high quality. Furthermore, disposable gloves can be daily used in household purposes for cleaning and dishwashing. Under the threat of CONVID-19, there is a rise in concerns for safety, hygiene, and contamination for everyone. Therefore, the demand for disposable gloves is growing since the year 2020. The Differences Between Vinyl, Nitrile And Latex Gloves How to choose the right disposable glove? Although vinyl, nitrile, and latex gloves are all considered of medical and industrial grade, but each type of gloves has its own features. If you are new user in the industry, we compiled a helpful guide for you to choose the most convenient gloves. Nitrile glove Nitrile gloves are a great compromise between latex and vinyl. Nitrile gloves are soft, feel likes latex , while having an outstanding chemical and puncture resistance, have very good elongation compared to vinyl gloves.Because they are completely synthetic, do not contain any latex proteins that may cause allergic reactions to people who have sensitivities to them. We can definitely count on nitrile gloves to prevent the transmission of COVID-19 due to their dense material. As such, nitrile gloves are the ideal choice for anyone who has to handle hazardous and corrosive chemicals. However, the market price of nitrile gloves is relatively high compared to vinyl gloves. Vinyl gloves Vinyl gloves are made of a synthetic polymer derived from petroleum. The strengths of the glove are latex free, resistant to oil, fats and grease, low- priced compared to the market price of nitrile and latex gloves. The disavantage is that the manufacturing process make it hard and rigid. Due to the properities of vinyl gloves, they are recommended to use in non- hazardous and low-infection environments. Latex glove Latex gloves are made of natural rubber. They have excellent elasticity, are easy to wear, great form fitting, and eco-friendly. The disadvantages are that they may have small odours from the production process, and may cause allergies for some people. With high levels of flexibility, protection, and comfort, disposable latex gloves are suitable for most medical environments and some precisive assembling industries. They are somewhat less resistant than synthetic glove materials to puncture and extended chemical exposure. Or you can buy ppe gloves nitrile.

Minimum Order: 20 square metres

FFP3 respirators provide the highest level of respiratory protection that a disposable mask can offer. A well-fitting FFP3 of JQ Care mask can protect users against fine toxic particulates including asbestos, bacteria, viruses and radioactive particles. These masks are particularly important to where in an environment where asbestos particles are present as which having the potential to cause cancer. FFP3 Face Masks (and the equivalent N99 respirators) provide extra protection against toxic fumes and very fine dust, such as asbestos. They also provide even more protection against aerosols, such as those which spread COVID-19. However, as we mentioned, they also make it more difficult to breathe; in many situations, an FFP2 or N95 may provide enough protection. FFP3 Disposable Face Mask Specification Material spunbond-meltblown; nonwoven Color White BFE 99% Package 50pcs/box；40boxes/ctn Certification EN149 Or you can buy ppe hand gloves.

Minimum Order: 20 square metres

FFP2 respirator offers a moderate level of protection against harmful water, particulates and fumes. FFP2 respirator of JQ Care provides 95% protection against particles of at least 0.3 micrometers in diameter. This is about the same level of protection as provided by KN95 respirators (which are designed to meet the roughly equivalent Chinese standardGB2626-2019 ). Exhalation valves are more common in FFP2 masks as there is greater breathing resistance. Exhalation valves help to reduce the build-up of heat inside the safety mask, improving the comfort for the wearer. FFP2 Masks Specification Material Spunbond-meltblown; nonwoven Color White BFE 95% Package 50pcs/box; 40boxes/ctn Certification EN149 FFP2 Face Mask Protection FFP2 masks protect against brake dust, cotton dust, granite dust, hay, lead dust and fume and softwood dust. They are made for working environments in which deleterious and mutagenic particles can be found in the breathing air. They are most commonly used in the metal and mining industry. Without conformant safety face masks, workers exposed to the above hazards can develop lung cancer and Tuberculosis. FFP2 respirators are capable to protect toxic materials suspended in the air, such as lead dust, smoke, and aerosol particles, including for protection against COVID-19. The World Health Organization (WHO) and Centers for Disease Control (CDC) recommend using FFP2 respirators during the global Coronavirus pandemic. Buy ffp1 ffp2 ffp3 mask from JQ care.

Minimum Order: 20 square metres

FFP1 respirators give the minimum level of respiratory protection against non- toxic water and oil based particles，provides the lightest level of protection among the series of FFP respirators. The FFP1 of JQ Care is designed to provide 80% protection against particles of 0.3 micrometers in diameter and larger. FFP1 respirators protect you from breathing in large particles and are commonly used in places such as construction areas involving heavy dust and similar non- toxic particles, such as dust from sanding, brick dust, or pollen. Buy FFP1 Mask. FFP1 Face Mask Specification Material Spunbond-meltblown; nonwoven Color White BFE 80% Package 50pcs/box；40boxes/ctn Certification EN149 Buy medical disposable products wholesale.

Minimum Order: 20 square metres

Filtering Face Piece (FFP) masks are originally designed for industrial professional use, meet the requirements of EN149 to protect against particulate pollutants such as dust, smoke and aerosols.Tight-fitting FFP masks are also great to protect the wearer against viruses. These respiratory masks reliably filter the smallest particles and droplets from the air. Masks with an exhalation valve offer an extra degree of comfort for the wearer. The European standard EN149 divides filtering half masks into classes depending on the guaranteed degree of protection. The higher the type of FFP protection is, the tighter the mask is and the better it protects our respiratory system. JQ Care offers FFP1 FFP2 FF3 mask for different grade protection. How Do You Choose the Right Mask? Throughout the pandemic, more and more people build awareness of mask usage and classification, you might be confused by the choices of mask. Precisely, you need to balance the cost, comfort, and availability of various types of masks against their effectiveness for what you’ll need them to do. Unfiltered surgical face masks provide appropriate daily protection with its non-woven meltblown filter media later. FFP1, FFP2 (KN95), and FFP3 (KN99) respirators provide more protection, FFP2 and KN95 respirators, in particular, are recommended as providing high-quality protection against the spread of respiratory illness. Half-mask respirators design provides equally good protection and may be even more comfortable and cost-effective than standard respirators, especially if you’ll be wearing them for long hours. In conclusion, you should choose the mask or respirator to fit your use situation. If you’re working on a construction project or in an enclosed space with a lot of people and the risk of COVID-19 spread, keeping yourself safe is more important than comfort, a respirator is recommmended. If you need to wear protection for many hours but there is little direct risk of COVID-19 exposure, wearing a disposable face mask or surgical mask may make more sense. Buy from medical disposable products companies.

Minimum Order: 20 square metres

Full Name: Cyclopentane-1,2-Dicarboximude (1,2-Cyclopentane Dicarboximide) Synonyms: Tetrahydrocyclopenta[c]pyrrole-1,3(2H,3aH)-dione Molecular Formula: C7H9NO2 Molecular Weight:139.15 EINECS No.: 227-285-6 CAS No.: 5763-44-0 Properties: White to off white crystalline powder Usage: An important raw material and intermediate used in Organic Synthesis, Pharmaceuticals. Gliclazide intermediate. Package: 25kg fiber drums or as customer request Technical Data Sheet: Parameter Guarantee Appearance White to off white crystalline powder Melting Point 84-88℃ Loss on drying %≤ 0.5 Residue%≤ 0.5 Assay % ≥ 98

Minimum Order: 30