Fresh Food

This Fish Skinning machine is specially produced, so the surface of the fish is clean and the actual outcome of cutting efficiency is more than 99 %, which maximize the capability and productivity. The blades can be adjusted front and back up and down so it can be applied to any kind of fish. The input insert place, bottom support, upper board and others can be separated with one touch action. 1.Widely used: for processing a variety of fish, for example, squid, tilapia, catfish, cod, sole fish, red fish, snapper, etc. 2.High efficiency: a machine can be over 30-50 operation ability, recycling equipment costs in the short term. 3.High Effect: high peeling effect is better, to skin clean and tidy. 4.Out into a high: than manual peel out rate. 5.Easy to clean: equipment all adopt the stainless steel material, adopts the humanized design, easy to remove clean.

Minimum Order: 1 bags

This is complete sausage making plant, profe , ssional sausage machinery, sausage processing

Minimum Order: 1 bags

The fish meat picking machine is equipped with a meat picking barrel and a rubber belt for pressing meat (made of rubber material, sturdy and durable). The rolling meat picking barrel and the transmission rubber belt press each other to squeeze the fish into the meat picking barrel. The fish meat takes over 95% and adopts gear transmission, with high transmission efficiency, smooth operation, and low noise. And leave the fish skin and bones outside the meat picking bucket, and use a scraper to transport them out of the machine. A minimum of 180kg of fish can be processed at once, achieving the goal of improving raw material utilization and saving labor costs. The extracted fish meat can be directly used to produce various fish paste products: fish balls, fish noodles, fish glue, fish dumplings, and other fish sauce raw materials. The parts that come into contact with food and the appearance of the machine are made of high-quality stainless steel material, which meets the requirements of national food hygiene standards. Especially suitable for professional food processing enterprises with high hygiene requirements.

Minimum Order: 1 bags

The machine is necessary in the meat product factory. The machine is made of stainless steel, so it’s easy to clean and never rust. The compact structure makes it run steadily and function well with little noise. It’s efficient and easy to operate. The meat can be evenly salted in the machine.

Minimum Order: 1 bags

This machine is mainly used to cut chicken, duck, goose ribs, meat pieces, fish pieces, large bones, tibia, spine bones, leg bones, pig feet, etc Features Made of stainless steel Large production capacity, cost-effective and labor-saving Mainly used in commercial venues such as hotels and restaurants

Minimum Order: 1 bags

This machine has a compact structure. Works steady, high output, small particle size. The contact part with food is made of stainless steel. It is non-pollution to material and meets with food hygienic. The grinding head have made heat treatment and it is made of high quality stainless steel. Good wear-resisting property. Long life service. This machine is easy to wash and it can process many kinds of material. The processed material still keep the original nutritional ingredient of the raw material. Good preservation effect. The grinding head can be changed according to different material. This machine is the best choice for meat processing factory, pet food processing factory and Biological health care products factory.

Minimum Order: 1 bags

1).use hot water to scald pig/cow/sheep head or feet first; 2).heat the rosin in machine to 240℃; 3).put scaled pig/cow/sheep head or feet in machine,to make them stained with rosin fully; 4).then take them out from the machine,and put them in cold water to cool; 5).after the rosin is solidified,strip off the solidified rosin,then the hair will be off along with solidified rosin.

Minimum Order: 1 bags

This machine is made of high-quality stainless steel, which does not pollute the processed materials and meets food hygiene standards. The cutting tool has undergone special heat treatment, with superior wear resistance and long service life. This machine is easy to operate, easy to disassemble and assemble, easy to clean, and has a wide range of processed products. After material processing, it can maintain its original various nutritional components and has a good preservation effect. The cutting tools can be adjusted or replaced freely according to actual usage requirements.

Minimum Order: 1 bags

a) The shear type bone crusher is suitable for crushing various hard materials; b) The shear type bone crusher is suitable for coarse crushing of conventional materials; c) According to the actual situation of customers, special material door devices and screen mesh sizes are designed to meet the requirements of various material shapes and particle sizes.

Minimum Order: 1 bags

Bone and meat crusher has a strong crushing function for pigs, cattle bones, osteoclasts, pigs, cattle bones, poultry bones, fish bones, and restaurant waste. Compared with the former, the machine has a larger crushing ratio, higher efficiency, small footprint, easy installation and simple operation and maintenance. Housing and hopper parts are made of all stainless steel

Minimum Order: 1 bags

1)This machine can cut whole chicken, duck goose with bone, also can cut bar or diced function to stretchy food. 2)This machine adopt imported cutter made, excellent performance, easy cooperate, facility use. 3)It is suitable in large, middle,small factory or home as your first choice equipment, Our tenet is excellent after service.. 4)This machine adopt craftwork and technicals of Germany. 5)Whole machine adopt high quality 304 stainless steel, 3mm depth of Armor plate. 6)High strength cage type’s fuselage with compact frame. 7)Surface deal with polishing and drawbench.. 8)Adopt optimize sanitation design, easy to wash and maintenance daily. 9)The cutter of machine made of stainless steel and special quencher technology. 10)Tartness and endure, special cutter for food machine. 11)Adopt double blade cutting,cutter and blade assort rigour and tighten. 12)Sole cutter team, lower noisy, take down freely of high strength nylon gear wheel.

Minimum Order: 1 bags

This machine can produce market pie, fashion Hamburg chicken nuggets, mallard incense Hamburger nets bread, fish potato latkes, pumpkin pie, kebabs and other products, is a fast-food restaurant, distribution center, food factory ideal meat (vegetable) molding equipment. It also can produce different shapes burgers, round, square and special shapes of products. Can produce different materials products. Fish, beef, pork, chicken, vegetables, etc. The machine is made of stainless steel conforming to the hygiene standards, easy cleaning; The machine adopts the European security apparatus design. Multi-purpose, material suitable for wide, abandent products.

Minimum Order: 1 bags

This processing line is used on chicken feet skin removing, and nail removing, fit for chicken feet food processing plant or factory, or used for hotel and restaurant. This chicken feet production line is easy to operate, high output, clean peeling; peeling rate can reach above 98%.

Minimum Order: 1 bags

1. The formed burger pie ,chicken nuggets will enter this machine, it pass through the upper and down belt and stick itself with starch(the user prepared ready). 2. After sizing, the excess starch on the burger will be blow down by the air-shower device, which avoid the excess starch enter into the next process.

Minimum Order: 1 bags