Food Processing Machinery

The multi-story flour milling plant is famous for its advanced processing technique, complete machine assembly, low power consumption as well as convenient operation and maintenance.This flour milling plant fits for the production of special purpose flour and different-grade flour. This series contains different models including 100TPD, 120TPD, 140TPD, 160TPD, 200TPD, 220TPD, 250TPD, 300TPD, 350TPD, 400TPD, 500TPD, 600TPD, 800TPD and 1000TPD. Flour Milling Plant Features 1. With a magnificent look, the building helps to improve the brand awareness, and it is a permanent building with long life. 2. The manufacturing workshops are bright and spacious, while the equipped machines allow simple disassembly and maintenance. Moreover, there is little dust inside the workshops.

The series Flour Milling machinery contains square plansifter, new pneumatic roller mill and other flour milling equipment. With the novel design, advanced equipment and scientific production flow, this flour milling plant is commonly used to manufacture tailored flour and graded flour.  The complete set of multi-story steel structure flour milling plant is an innovation by Pingle engineers and technicians, which is the first in China,  can fully meet the production needs with higher economic benefits. Pingle plant and equipment sold as a whole is an important characteristic of this series of products.

1. Structure a. This 2-storey plant has a compact structure, and it needs only a small number of operators, usually 2-3 men fewer. The operators could get a clear view upwards when standing on the bottom, such as the running status of purifier, mill, air lock, centrifugal fan, square plansifter, etc. b. Compared with multi-storey type, this steel structure Wheat Milling Equipment could be put into use 4 months earlier due to the shortened building time. Hence, the investment will be returned much faster. c. It takes a short time to finish installation and pilot run. For example, the installation time for the 140TPD is only 60 days. d. Due to the limited building height, the construction cost is only 1/2 or 1/3 of mulit-storey type. 2. Complete Product

Compact Structure Flour Milling Plant Wheat Flour Plant Description This series has been widely promoted in Ethiopia. Customers can choose small capacity flour processing equipment to enter the industry. After accumulating certain experience, they can gradually expand production and increase investment. Thanks to the outstanding features,more than 200 sets of this Pingle flour milling plant have been sold around the world. This product is applied to fabricate graded flour that is universally used in bakery and biscuit factory.  The small scale flour milling plant contains several models which are 6FTS-26A, 6FTS-36A, 6FTFS-42B, 6FTFS-52B, 6FTFS-62B and 6FTFS-82B.

Multi-story Wheat Flour Milling Machine This series contains different models of wheat flour milling plant (Machine) including 100TPD, 120TPD, 140TPD, 160TPD, 200TPD, 220TPD, 250TPD, 300TPD, 350TPD, 400TPD, 500TPD, 600TPD, 800TPD and 1000TPD. Applications of Wheat Milling Plant  This series of wheat flour milling machine  is a multi-story building structure, and each equipment adopts a layered layout according to the process. It is especially suitable for customers with high requirements for wheat and flour mixing.This flour milling plant fits for the production of tailored flour and all-purpose flour. The finished wheat flour is usually used to produce bread, biscuit, spaghetti, instant noodle, etc. Owing to these, this product has been successfully exported to different countries in the Middle East, North Africa and South America.

Maize Flour Milling Machine Maize Flour Milling Machine with Hammer Crusher Features 1. Specialized design for fine maize flour processing.             2.Combined maize cleaning machine, easy to operate and less space coverage.                                                  3. Wear resistant sieve plate for degerminator and crusher with long life time 4.Self-absorption Percusion Grinder integrates loading, crushing and discharging, which saves investment Complete maize processing line including cleaning, conditioning, degermination and grinding, suitable for fine maize flour. This series contains different models including 15TPD, 30TPD, 50TPD

Wheat processing flour plant We Pingle Group can supply 9T-1000T different size of complete wheat flour milling plant. process of flour milling The process of flour milling (from wheat to milled into wheat flour) usually consist of the following: 1. wheat storage (silos, or warehouse) 2. cleaning system of Wheat Flour(sifter, destoner, separator, magnet, scourer, etc) 3. dampening of Wheat Flour (dampener, conditioning silos, etc) 4. milling system of Wheat Flour (roller mill, plansifter, purifier, impact detacher, etc.) 5. Wheat Flour pressure and blending system (if need) 6. flour packing and stacking

Maize Milling Machine Pingle is specialized in the production and sales of large, medium and small maize milling machine, which is from 50t-250t per day. We have been committed to the research and innovation of maize dehulling, degerming and maize milling technology. Over the years, we have gathered a large number of experienced technical personnel and service teams and developed suitable maize milling machine for African, special maize milling machine for Kenya, Zambia, Uganda, Tanzania and Mozambique have been introduced. Maize Milling Machine Introduction Maize Milling Machine has high utilization rate, rich nutrition, and even its by-products. Therefore, it is called the "future grain", and the comprehensive utilization of corn is one of the profitable projects in the flour industry. Our Maize Milling Machine is the latest model designed for processing low-fat corn flour of different particle sizes and other cereal crops. After processing High-quality corn and coarse grain flour (adjustable in size) are available. Its simple design and high-quality final product make it a profitable and affordable choice for the flour processing industry.

PLMFKA Pneumatic Roller Mill Type: Pneumatic Roller Mill and E-control Roller Mill Model: PLMFKA100×25×4 PLMFKA125×25×4 PLMFKA100×25 PLMFKA125×25 PLMFKA100×30 PLMFKA125×30 PLMFKT100×25 PLMFP100×25×4 PLMFP125×25×4 PLMFP100×25 PLMFP125×25 PLMFKA Pneumatic Roller Mill Description Built-in motor for space saving; Internal pneumatic pick-up designed for steel structure flour mill plant; The feeding door is regulated automatically by the pneumatic servo feeder as per the signals from the stock sensors of feed hopper, to maintain the stock at the optimum height inside the inspection section and assure the stock to overspread the feeding roll in continuous milling process;

PLMFP E-Control Roller Mill Control Roller Mill Description PLC and stepless speed-variable feeding technique to maintain the stock at the optimum height inside the inspection section, and assure the stock to overspread the feeding roll in continuous milling process; Flip-open type protective cover for convenience of maintenance and cleaning; Modularized feeding mechanism allows the feeding roll to turn out for extra stock cleaning and keeping the stock from deterioration; Precise and stable grinding roll clearance; multiple damping devices for minimum vibration and reliable fine-adjustable lock; Tailored high-power off-gauge toothed belt used in driving between grinding rolls for the demands of high power drive; Screw-rod tensioner as adjusting device for precise tension adjustment of toothed belt.

Ramen Snacks Forming Machine Ramen Snacks Forming Machine is used to produce ramen snacks with broken instant noodles as materials. Technical Features: The material hopper on Granola Bar Machine has heater to keep the material's temperature, also has specific blade to evenly fill the materials to the molds. We've used industry best practices to create a fully customizable system with state-of-the-art features. Stainless steel components and a sanitary design allow for complete wash down, while a modular design makes way for additional features. Various shapes and sizes can be achieved by changing the molds. Also, we supply one mold with two shapes (same thickness) to lower the investment. System Advantage: Nuts Bar Forming Machine could connect with auto packing machine to realize continuous production. Model Capacity Power Dimension QL-560K 400-600kg/hr 2.5kw 2600 x 1200 x 1350mm

Snacks Pellets Processing Line Pellet Making Machine has versatile integrated die-face forming and cutting devices are widely integrated in snack pellet lines.  These offer significant productivity and quality advantages compared to conventional food pellet making machine, with continuous production, greater flexibility, precision thermo-mechanical parameter control and automation options to produce consistent and innovative products. The Export Model Pellets Making Machine (EMPMM) is one of the offered model of Pellets Making Machines manufactured by Rajkumar. As the name suggests, the EMPMM is a heavy dutymachine fitted with a special gear box. It can be easily used formaking Animal Feed Pellets as well as Biomass Pellets. Versatility to process any type of starch-based raw material Efficient control of melt flow and melt temperature resulting in consistent regularity in pellet dimensions Easy changes in recipes and new product shapes Automation features including recipe management, automatic start up and shut down, temperature regulation control for every module, real time trending display for each process parameter.

Degradable Straw Production Line can produce degradable straws to replace the traditional plastic straws. Environmental Edible Rice Straw Production Equipment takes rice flour and cassava powder as raw materials. After extrusion and ripening, it is extruded from the mold and cut off. It produces edible degradable straw to replace the traditional plastic straws, round and square products with novel patterns. Plastic straws are forbidden to be used at more and more countries and areas because of their non-degradability. To protect the environment and replace the traditional plastic straws, we developed Environmental Sucker Machine to produce food-based straws. Environmental protection rice straw production equipment is extruded into billets of various sizes by single screw extrusion mechanism, and then dried into straw with smooth surface and realistic shape;  Our screw combination technology and precise control of the production process can enable you to choose a wider range of raw materials, higher product quality and more varieties.  An extruder can complete the process of mixing, kneading, cooking, ripening and extrusion.  Compared with ordinary straw, the product has unique process, reasonable configuration, high degree of automation, stable performance, environmental protection and no pollution. It can also be eaten directly after use.  The straw can last two to three hours in hot drinks and longer in cold drinks.

This line is a traditional production line for tortillas. The standard structure is: dough mixer, dough bulk divider, divider&rounder, automatic hot press forming mechanism, 3-layer oven, 9-layer cooling system, counting & stacking mechanism and packaging machine. The final configuration and structure of the production line depends on your production process. We can modify almost every part to meet your different production needs, such as modifying the molding method, modifying the oven and cooling system, etc. We accept customization, please tell us your requirements, or you can also give comments and suggestions on our equipment to help us improve the machine, we will try our best to develop a suitable solution for you. In addition to providing equipment, we can also plan the factory layout for you. If you need it, you can provide us with information such as the area of the factory, and we will configure the equipment for you according to your available space.