Food & Beverages

Feed Pellet Mill Introduction The HMLH678 feed pellet maker is one of the indispensable pieces of equipment in the feed mill plant. It can be used alone or in the feed pellet production line. The feed pellet maker machine can make various animal feeds: Poultry feed, such as chicken feed, duck feed, goose feed, and bird feed; livestock feed, such as horse feed, pig feed Feed, and rabbit feed; ruminant feed, such as cattle feed, sheep feed, camel feed, etc. Herm machinery big capacity good price HMLH678 feed pellet maker is high precision gear drive ring die feed pellet machine, this machine has stainless steel conditioner, with frequency speed control, use “SKF” high-quality bearing, ensure high-efficiency, stable and low noise drive, can work alone with its electric cabinet. It can be used in all kinds of large and middle farms to make feed pellets to feed animals, for raw materials, it can be grain, such as wheat, corn, maize, etc., and some grass, and straw also can be applied to this machine, has a very broad application.

Minimum Order: 1 bags

Grass Feed Pellet Machine Introduction It is a professional industrial use of grass pellet machinery that produces grass pellets. The key to grass pelletizing is the water content of the raw grass. First of all, we must measure the moisture content of the raw materials. Then, regulate it to an appropriate value by adding water or sun-drying. Research shows that the best moisture content for leguminous forage grass pellets is 14% to 16%. For Gramineae forage grass pellets it is 13% to 15%. In fact, grass pellets can also be used as fuel for heating if the moisture is accurately controlled. Grass pellets may produce more ash than wood pellets, and the calorie in grass pellets is not so much as in wood pellets, but grass pellets have still a well-accepted method in Europe for a long time. In a word, the grass pellets are an excellent choice for both feed and fuel.

Minimum Order: 1 bags

HM Belt Type Feed Pellet Mill Introduction The belt-type ring dies feed pellet machine is a large-scale feed pellet machine, which is used to make corn stalks, bean stalks, flower seedlings, sweet potato wine, clover, rape straw, etc. into cattle feed, pig feed, cattle feed, sheep feed, rabbits feed, chickens feed, ducks feed, etc. The ring dies feed machine is the preferred equipment for making feed in large and medium-sized feed factories and various livestock farms. It is suitable for granulation in feed mills, farms, and chemical industries. This ring dies feed grinder can make various materials into pellets for livestock feed, grass powder, and organic fertilizer materials. Feed Pellet Mill Structure Our feed pellet machine is mainly composed of a feeder, modulator, pellet mill, lubrication system, and so on. The operation process requires that the mixing degree of the material should not exceed 15%. The material enters the feeding screw through the silo. Change the speed by adjusting the step-less speed regulation motor to make the material flow moderately. Then start tempering by mixing with steam through a paddle mixer. After tempering, the material temperature can be between 64°C and 84°C, and the humidity can be between 14% and 16%. Finally, the material enters the press box through the chute for granulation. HM Belt Type Feed Pellet Mill Features 1. The feeder of our belt-type feed pellet machine adopts the originally imported frequency conversion controller, and the feeding is uniform and accurate. 2. The conditioner is all made of stainless steel to ensure that it will not deteriorate in the steam environment for a long time. It is also designed with inspection doors for easy cleaning and maintenance. During the tempering process, the feed is in full contact with the steam, and the degree of maturation of the feed is higher, which is conducive to the production of high-quality pellet feed. 3. The feed inlet is designed with a deflector, which can control the flow direction of the material (into the cutting chamber or directly discharged from the bottom). It is convenient to prevent materials with the wrong ratio from entering the granulation system. 4. The transmission belt adopts a high-strength SPB V-belt, the transmission is stable and reliable, and the noise is low. 5. The ring die is also made of 100% stainless steel for extra durability. There are a variety of apertures for you to choose from (φ1.5mm~φ12mm), and the compression ratio is customized according to your specific raw materials. 6. The quick-release hoop mold design makes replacement more convenient and greatly improves production efficiency. 7. One-piece spindle, easy to disassemble and assemble, good mechanical performance. 8. Scraper: 1 outer scraper, 2 inner scrapers. (Outer scraper is used to cut feed pellets with adjustable pellet length; inner scraper is used for mixing and deflection) 9. Reasonable lubricating system design (spindle, pressure roller): specially designed refueling holes to achieve non-stop refueling.

Minimum Order: 1 bags

What is The 20-30T/H Feed Pellet Line ? Large scale high performance 20-30 t/h feed pellet plant is suitable for processing various animal feeds, such as chicken feed, poultry feed, livestock feed, bird feed, duck feed, goose feed, cattle feed, sheep feed, camel feed, horse feed, pig feed, rabbit feed, fish feed, shrimp feed, crab feed, aquatic feed, etc. The main equipment of a complete 20-30T/H animal feed pellet mill machine includes an animal feed grinder and feed mixer, feed pellet machine, counter-flow feed pellet cooler, pellet crumbler machine, box cylinder pulse dust remover, vibrating screen classifier, bucket elevator, automatic bagging system, electric control cabinet, etc. This complete feed pellet plant can accomplish raw material mixing, transmission, feeding, and pelletizing. After the raw materials become feed pellets, the following equipment can cool them down and pack them into bags. The animal-feed pellet plant has good raw material versatility and can be used for the granulation of various raw materials such as corn, sorghum, wheat, beans, and oilseed meal. At the same time, the animal feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service. Some Questions About the 20-30T/H Feed Pellet Line 1. Who is suitable for this 20-30t/h feed pellet production line? This animal feed production line is specially designed for large farmers, large animal farm plants, animal feed suppliers, etc. 2. What raw material can be used in the 20-30t/h feed pellet production line? Animal feed pellet production line raw materials include corn/maize, wheat, grass, alfalfa, oil seed meal & cakes, pasture, bone meal, microelements, etc., and other kinds of raw materials, such as premix, vitamins, wheat bran, salt and other. Different formulations can be made according to different formulas and the needs of the animals being farmed. 3. Why Choose Our Animal Feed Production Line? Widely Applications: This animal feed pellet mill plant can make feeds for poultry, livestock, sheep, pig, cattle, chicken, duck, fish, shrimp, crab, aquatic, and other animals, it makes pellets for 1-12mm diameter, the pellet size is can be changed with the our feed pellet machine by adjust die. It also can produce mash and crumble. Small Investment: the compact design of this small feed mill plant can reduce the investment in workshops, etc. Low Installation Cost: Our feed production line comes with detailed installation and commissioning instructions, it is easy to install the machine, and you can use it immediately after the machine is installed. Low Production Cost: The animal feed factory only needs 1-2 production workers to complete the production operation. With less labor and lower production costs, your profits will increase. 4. What kind of animal feed pellet production line produce? This feed pellet production line can produce feed for meat chicken, broilers, laying hens, small baby chicken feed, cattle feed, pig feed, duck feed, sheep feed, poultry feed, livestock feed, goat feed, fish feed, shrimp feed, crab feed, aquatic feed, etc. Such as 2-4mm diameter chick feed pellets and pig feed pellets. 2-5mm rabbit feed pellets, 4-8mm cattle or sheep feed pellets. This feed pellet mill with a ring die, makes pellets of 1-12mm in diameter, the pellet size can be changed with our feed pellet machine by adjusting the die. It also can produce mash and crumble. 5. What we can do for you? We can provide the project design, flow chart, feed-making machine manufacturer, project installation and commission, your staff training, after-sales service, etc. Also, our professional install team will serve you if you need it.

Minimum Order: 1 bags

What is The 15-25T/H Feed Pellet Line ? This big-scale efficiency 15-25t/h feed pellet production line is suitable for processing various animal feeds, such as chicken feed, poultry feed, livestock feed, bird feed, duck feed, goose feed, cattle feed, sheep feed, camel feed, horse feed, pig feed, rabbit feed, fish feed, shrimp feed, crab feed, aquatic feed, etc. The main processing flow of the 15-25t/h animal feed production line: raw material receiving and cleaning system, raw material crushing, batching & mixing, pelletizing, cooling, screening, and packaging. This is just the general 15-25t/h feed process, according to different feed types, different output configurations can be customized. The animal-feed pellet plant has good raw material versatility and can be used for the granulation of various raw materials such as corn, sorghum, wheat, beans, and oilseed meal. At the same time, the animal feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service. Some Questions About the 15-25T/H Feed Pellet Line 1. Who is suitable for this 15-25t/h feed pellet production line? This animal feed production line is specially designed for large farmers, large animal farm plants, animal feed suppliers, etc. 2. What raw material can be used in the 15-25t/h feed pellet production line? Animal feed pellet production line raw materials include corn/maize, wheat, grass, alfalfa, oil seed meal & cakes, pasture, bone meal, microelements, etc., and other kinds of raw materials, such as premix, vitamins, wheat bran, salt and other. Different formulations can be made according to different formulas and the needs of the animals being farmed. 3. Why Choose Our Animal Feed Production Line? Widely Applications: This animal feed pellet mill plant can make feeds for poultry, livestock, sheep, pig, cattle, chicken, duck, fish, shrimp, crab, aquatic, and other animals, it makes pellets of 1-12mm diameter, and the pellet size can be changed with our feed pellet machine by adjust die. It also can produce mash and crumble. Small Investment: the compact design of this small feed mill plant can reduce the investment in workshops, etc. Low Installation Cost: Our feed production line comes with detailed installation and commissioning instructions, it is easy to install the machine, and you can use it immediately after the machine is installed. Low Production Cost: The animal feed factory only needs 1-2 production workers to complete the production operation. With less labor and lower production costs, your profits will increase. 4. What kind of animal feed pellet production line produce? This feed pellet production line can produce feed for meat chicken, broilers, laying hens, small baby chicken feed, cattle feed, pig feed, duck feed, sheep feed, poultry feed, livestock feed, goat feed, fish feed, shrimp feed, crab feed, aquatic feed, etc. Such as 2-4mm diameter chick feed pellets and pig feed pellets. 2-5mm rabbit feed pellets, 4-8mm cattle or sheep feed pellets. This feed pellet mill with ring dies, makes pellets of 1-12mm diameter, the pellet size can be changed with our feed pellet machine by adjusting the die. It also can produce mash and crumble. 5. What we can do for you? We can provide the project design, flow chart, feed-making machine manufacturer, project installation and commission, your staff training, after-sales service, etc. Also, our professional install team will serve you if you need it.

Minimum Order: 1 bags

What is The Pig Feed Mill Plant? The complete pig feed processing line uses fine rice bran, fish meal, soybean meal, corn, wheat bran, calcium hydrogen phosphate, salt, limestone, additives, brown rice, and other trace raw materials to produce pellet feed. The pellets are rich in nutrients and can meet the growing needs of pigs at different growth stages. By combining the moisture, heat, and pressure of the feed ingredients, a degree of gelatinization is created, which allows pigs to better utilize the nutrients in these ingredients. Feed pellet mill plants are widely used in small farms and large and medium-sized feed mills. Our pig feeds pellet production line includes grain hammer mills, conveyors, feed mixers, swine feed pellet processors, coolers, crushers, screening machines, automatic packaging machines, and more. It can produce 2-12mm cylindrical feed pellets according to your needs. Usually, suckling pigs: 2-3mm pellets, piglets: 3- 3.5mm pellets, growing pigs: 4-6mm pellets, and sows 2-12mm pellets. The use of pig feed pellets in pig farms can greatly reduce pig feed waste, improve feed utilization, kill harmful parasites, and reduce the probability of pig disease. In addition, the pellet feed is easier to transport and store, and has good palatability, making it a good choice for pig farms. Some Questions About the Pig Feed Mill Plant 1. Who is Suitable for This Pig Feed Mill Plant? This pig feeds mill plant is specially designed for farmers, animal farm plants, animal feed suppliers, etc. 2. What Raw Material Can Use in The Pig Feed Mill Plant? Pig feed mill plant raw materials include corn/maize, wheat, grass, alfalfa, oilseed meal & cakes, pasture, bone meal, microelements, etc., and other kinds of raw materials, such as premix, vitamins, wheat bran, salt and other. Different formulations can be made according to different formulas and the needs of the animals being farmed. 3. What kind of feed pellet production line can produce? This feed pellet production line can produce feed for meat pigs, broilers, laying hens, small baby pig feed, cattle feed, pig feed, duck feed, sheep feed, poultry feed, livestock feed, goat feed, etc. Such as 2-4mm diameter chick feed pellets and pig feed pellets. 2-5mm rabbit feed pellets, 4-8mm cattle or sheep feed pellets. This feed pellet mill with a ring die, make pellets of 2-10mm in diameter, the pellet size can be changed with our feed pellet machine by adjusting the die. 4. Why Choose Our Pig Feed Production Line? Widely Applications: This pig feed pellet mill plant can make feeds for pigs, broilers, hens, poultry, livestock, sheep, pig, cattle, ducks, and other animals, it makes pellets of 2-12mm diameter, and the pellet size is can be changed with our feed pellet machine by adjusting die. Small Investment: the compact design of this feed mill plant can reduce the investment in workshops etc. Low Installation Cost: our pig feed production line comes with detailed installation and commissioning instructions, it is easy to install the machine, and you can use it immediately after the machine is installed. Low Production Cost: The pig feed factory only needs a few production workers to complete the production operation. With less labor and lower production costs, your profits will increase. 5. What Can We Do for You? We can provide the project design, flow chart, feed-making machine manufacturer, the project installation and commission, your staff training, after-sales service, etc. Also, our professional install team will serve you if you need it.

Minimum Order: 1 bags

What is The Livestock Feed Mill Plant? Starting a livestock feed pellet factory has been a profitable business activity in many countries. The production line of the livestock feed pellet factory is specialized in producing pig feed, horse feed, cattle feed, sheep feed, donkey feed, rabbit feed, etc. How to make livestock feed? You need livestock feed pellet plant equipment first. Our livestock feeds pellet mill production line with output ranging from 1 t/h to 100 t/h. A complete livestock feed pellet plant includes raw material storage, a cleaning machine, a feed crusher, a feed mixer, a livestock feed pelletizer, a cooler, a screening machine, a packaging system, transportation, and electronic control system. Our feed pellet production line can produce 2-12mm cylindrical feed pellets according to your needs. At the same time, the livestock feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. We provide free installation, training, factory design, and timely after-sales service. Some Questions About the Livestock Feed Mill Plant 1. Who is Suitable for This Livestock Feed Mill Plant? This livestock feeds mill plant is specially designed for farmers, animal farm plants, animal feed suppliers, etc. 2. What Raw Material Can Use in The Livestock Feed Mill Plant? livestock feed mill plant raw materials include corn/maize, wheat, grass, alfalfa, oilseed meal & cakes, pasture, bone meal, microelements, etc., and other kinds of raw materials, such as premix, vitamins, wheat bran, salt and other. Different formulations can be made according to different formulas and the needs of the animals being farmed. 3. What Kind of Livestock Feed Pellet Production Line Can Produce? This feed pellet production line can produce feed for meat livestock, broilers, laying hens, and small baby livestock feed, and livestock feed, pig feed, duck feed, sheep feed, poultry feed, livestock feed, goat feed, etc. Such as 2-4mm diameter chick feed pellets and pig feed pellets. 2-5mm rabbit feed pellets, 4-8mm livestock or sheep feed pellets. This feed pellet mill with a ring die, make pellets of 2-10mm in diameter, the pellet size can be changed with our feed pellet machine by adjusting the die. 4. Why Choose Our Livestock Feed Production Line? Widely Applications: This livestock feed pellet mill plant can make feeds for livestock, broiler, hen, poultry, livestock, sheep, pig, livestock, duck, and other animals, it makes pellets of 2-12mm diameter, and the pellet size can be changed with our feed pellet machine by adjusting die. Small Investment: the compact design of this feed mill plant can reduce the investment in workshops. Low Installation Cost: our livestock feed production line comes with detailed installation and commissioning instructions, it is easy to install the machine, and you can use it immediately after the machine is installed. Low Production Cost: The livestock feed factory only needs a few production workers to complete the production operation. With less labor and lower production costs, your profits will increase. 5. What Can We Do for You? We can provide the project design, flow chart, feed-making machine manufacturer, the project installation and commission, your staff training, after-sales service, etc. Also, our professional install team will serve you if you need it.

Minimum Order: 1 bags

What is The Cattle Feed Mill Plant? The complete cattle feed pellet production line uses barley, forage, pulses, bran, wheat, corn, and additives such as vitamins, minerals, and other essential trace ingredients to produce feed pellets. The granules are rich in nutrients and can meet the growing needs of cattle at different growth stages. By combining the moisture, heat, and pressure of the feed ingredients, a degree of gelatinization is created, which allows cattle to better utilize the nutrients in these ingredients. Feed pellets are widely used in small farms, large farms, and medium-sized feed mills. Our premium cattle feed pellet production line includes grain hammer mills, conveyors, mixers, cattle feed pellet mills, coolers, crushers, screeners, automatic packaging machines, and more. 2-12mm cylindrical feed pellets are available according to your needs. At the same time, the cattle feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service. Some Questions About the Cattle Feed Mill Plant 1. Who is Suitable for This Cattle Feed Mill Plant? This cattle feed mill plant is specially designed for farmers, animal farm plants, animal feed suppliers, etc. 2. What Raw Material Can Use in The Cattle Feed Mill Plant? Cattle feed mill plant raw materials include corn/maize, wheat, grass, alfalfa, oilseed meal & cakes, pasture, bone meal, microelements, etc., and other kinds of raw materials, such as premix, vitamins, wheat bran, salt and other. Different formulations can be made according to different formulas and the needs of the animals being farmed. 3. What Kind of Cattle Feed Pellet Production Line Can Produce? This feed pellet production line can produce feed for meat cattle, broilers, laying hens, small baby cattle feed, cattle feed, pig feed, duck feed, sheep feed, poultry feed, livestock feed, goat feed, etc. Such as 2-4mm diameter chick feed pellets and pig feed pellets. 2-5mm rabbit feed pellets, 4-8mm cattle or sheep feed pellets. This feed pellet mill with ring dies, makes pellets of 2-10mm in diameter, the pellet size can be changed with our feed pellet machine by adjusting the die. 4. Why Choose Our Cattle Feed Production Line? Widely Applications: This cattle feed pellet mill plant can make feeds for cattle, broilers, hens, poultry, livestock, sheep, pig, cattle, ducks, and other animals, it makes pellets of 2- 12mm diameter, and the pellet size is can be changed with our feed pellet machine by adjusting die. Small Investment: the compact design of this feed mill plant can reduce the investment in workshops. Low Installation Cost: our cattle feed production line comes with detailed installation and commissioning instructions, it is easy to install the machine, and you can use it immediately after the machine is installed. Low Production Cost: The cattle feed factory only needs a few production workers to complete the production operation. With less labor and lower production costs, your profits will increase. 5. What Can We Do for You? We can provide the project design, flow chart, feed-making machine manufacturer, project installation and commission, staff training, after-sales service, etc. Also, our professional install team will serve you if you need it.

Minimum Order: 1 bags

What is The Pet Food Production Line? The pet food production is assigned to pet food (including dog food, cat food, etc.) with unique shapes, tastes, and colors, and adapts to scientific nutrition ratio and easy to digest and other features to adapt to the ever-growing pet food market. Taste of varied shapes and meet the needs of all kinds of pet food. Our pet food production line consists feed mixing machine, pet food extruder, air cooler machine, drying machine, seasoning line, etc. Reasonable structural design, special materials, and self-cleaning performance ensure the stability of the machine and facilitate maintenance. Some Questions About The Pet Food Production Line 1. What is the Pet Feed? Pet feed refers to the products produced by industrial processing for direct consumption by pets, also known as pet food, including pet compound feed, pet additive premix feed, other pet feed, etc. 2. What Raw Materials Can Use in the Pet Food Production Line? Pet food mainly uses protein and fat as raw materials, including wheat, soybean meal, rapeseed meal, rice bran, bran, blood meal, bone meal, meat meal, oil, antibiotics, vitamins, etc. 3. What kind of Feed This Pet Food Production Line Can Produce? It can produce dog food, cat food, and other pet food with different shapes, tastes, and colors and also can produce aquatic feed floating feed, mackerel feed pellets, goldfish feed pellets, shrimp feed pellets, crab, mud, bullfrog and other feeds and foods. 4. Why Choose Our Pet Food Production Line? Widely Applications: This animal feed pellet mill plant can make feeds for dogs, cats, and other pets with different shapes, tastes, and colors, and also can produce aquatic feed floating feed, mackerel feed pellets, goldfish feed pellets, shrimp feed pellets, crab, mud, bullfrog feed with different sizes in diameter. Low Installation Cost: Our pet feed production line is carefully designed according to the on-site survey of the production site and customer requirements, in line with the principle of “economical and practical”. It comes with detailed installation and commissioning instructions, and it is easy to install the machine, and you can use it immediately after the machine is installed. Low Production Cost: The animal feed factory only needs several production workers to complete the production operation. With less labor and lower production costs, your profits will increase. 5. What we can do for you? We can provide the project design, layout design, flow chart, feed-making machine manufacture, the project installation and commission, your staff training, after-sales service, etc. Also, our professional install team will serve you if you need it.

Minimum Order: 1 bags

What is The Dry Type Fish Feed Mill Plant? Herm machinery high-quality fish feed pellet mill plant can produce various fish feed pellets, including grass carp feed, herring feed, carp feed, trout feed, tilapia feed, salmon feed, catfish feed, etc. The raw materials of the complete fish food plant production line include fishmeal, homemade fishmeal, alcohol masterbatch, soybean phosphatide, soybean meal, peanut meal, shrimp flour, sub-powder, wheat gluten meal, vegetable oil, etc. The final pellet produced is between 0.5mm-12mm. For example, grass carp 0.8-6.0mm pellet, herring 0.5-6.0mm pellet, carp 0.8-5.0mm pellet, bream 0.5-3.5mm pellet, rainbow trout 0.8- 3.0mm pellet, trout:0.8-3mm pellet, tilapia:0.8- 4mm pellet. The complete fish feed production line includes a feed grinder, feed mixer, feed dryer, feed cooler, oil spray machine, and packing machine which are connected by conveyors or elevators. The feed pellet can float on the water for 12 hours at least. Adjusting the feed formulation also can make a sinking feed pellet. The pellet size is from 1mm to 12mm by changing the molds. The products can have different shapes, unique flavors, rich nutrients, and fine textures to meet the different eating habits of animals. With Super automation control and high production efficiency, this fish feed production line is the best choice for medium and big-sized feed mills and breeding farms.

Minimum Order: 1 bags

What is The Wet Type Fish Feed Mill Plant? Our wet-type fish feed pellet production line is the complete procedure of a fish feed-producing plant, which includes a fish feed-making machine, fish feed crusher, fish feed mixer, fish feed dryer, and other equipment. It is used to produce a variety of materials into high-grade aquatic feed pellets for fish, catfish, shrimps, crabs, etc. This wet-type fish feed plant is newly developed to meet the demand for intensive production of fish feed pellets which can process all kinds of grain powder into the high-quality aquatic pellet. With many specifications, this fish pellet plant can produce fish feed, pet feed, livestock feed, etc. The complete fish feed production line includes a feed grinder, feed mixer, feed dryer, feed cooler, oil spray machine, and packing machine which are connected by conveyors or elevators. The feed pellet can float on the water for 12 hours at least. Adjusting the feed formulation also can make a sinking feed pellet. The pellet size is from 1mm to 12mm by changing the molds. The products can have different shapes, unique flavors, rich nutrients, and fine textures to meet the different eating habits of animals. With Super automation control and high production efficiency, this fish feed production line is the best choice for medium and big-sized feed mills and breeding farms. This wet-type fish feed production line can produce various kinds of pellets for different varieties of fish including Catfish pellets, CatCarp pellets, Halibut pellets, Trout pellets, Hemp pellets, CSL pellets, etc.

Minimum Order: 1 bags

What is The Pig Feed Mill Plant? Starting an animal feed milling machine has been a profitable business endeavor in many countries. The animal feed production line is mechanical equipment that specializes in making animal feed. For example, it can produce chicken feed, cattle feed, sheep feed, pig feed, horse feed, cat food, dog food, fish feed, shrimp feed, and so on. How to make animal feed? You need animal feed production line equipment. Herm machinery computer control animal feed pellet plant production line with an output range of 1ton/hour to 100ton/hour, Complete animal feed production line includes raw material storage, cleaning machine, crushing machine, feed mixing machine, animal feed pellet machine, cooling machine, screening machine, packaging systems, transportation, and electronic control system. The complete animal feed pellet production line uses barley, forage, pulses, bran, wheat, corn, and additives such as vitamins, minerals, and other essential trace ingredients to produce feed pellets. The granules are rich in nutrients and can meet the growing needs of animals at different growth stages. By combining the moisture, heat, and pressure of the feed ingredients, a degree of gelatinization is created, which allows animals to better utilize the nutrients in these ingredients. 2-12mm cylindrical feed pellets are available according to your needs. At the same time, the animal feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. Another, we provide free installation, training, factory design, and timely after-sales service. Some Questions About the Animal Feed Mill Plant? 1. Who is Suitable for This Animal Feed Mill Plant? This animal feed mill plant is specially designed for farmers, animal farm plants, animal feed suppliers, etc. 2. What Raw Material Can Use in The Animal Feed Mill Plant? Animal feed mill plant raw materials include corn/maize, wheat, grass, alfalfa, oilseed meal & cakes, pasture, bone meal, microelements, etc., and other kinds of raw materials, such as premix, vitamins, wheat bran, salt and other. Different formulations can be made according to different formulas and the needs of the animals being farmed. 3. What Kind of Animal Feed Pellet Production Line Can Produce? This feed pellet production line can produce feed for meat animals, broilers, laying hens, small baby animal feed, animal feed, pig feed, duck feed, sheep feed, poultry feed, livestock feed, goat feed, etc. Such as 2-4mm diameter chick feed pellets and pig feed pellets. 2-5mm rabbit feed pellets, 4-8mm animal or sheep feed pellets. This feed pellet mill with ring dies, makes pellets of 2-10mm in diameter, the pellet size can be changed with our feed pellet machine by adjusting the die. 4. Why Choose Our Animal Feed Production Line? Widely Applications: This animal feed pellet mill plant can make feeds for the animal, broilers, hens, poultry, livestock, sheep, pig, animal, ducks, and other animals, it makes pellets of 2-12mm in diameter, and the pellet size can be changed with our feed pellet machine by adjusting die. Small Investment: the compact design of this feed mill plant can reduce the investment in workshops. Low Installation Cost: our animal feed production line comes with detailed installation and commissioning instructions, it is easy to install the machine, and you can use it immediately after the machine is installed. Low Production Cost: The animal feed factory only needs a few production workers to complete the production operation. With less labor and lower production costs, your profits will increase. 5. What Can We Do for You? We can provide the project design, flow chart, feed-making machine manufacturer, the project installation and commission, your staff training, after-sales service, etc. Also, our professional install team will serve you if you need it.

Minimum Order: 1 bags

What is The Poultry Feed Mill Plant? Starting a poultry feed processing plant has always been a profitable business in many countries. Poultry feed plant is specialized in producing duck feed, goose feed, chicken feed, bird feed, parrot feed, and other poultry feed, etc. How to make poultry feed? You need a poultry feed pellet production line first. Our fully automatic poultry feed mill plant with output ranging from 1ton/h-100ton/h. The complete poultry feed pellet production line includes raw material storage, a washing machine, a feed crusher, a feed mixer, a poultry feed pelleting machine, a cooler, a screening machine, a packaging system, transportation, and electronic control system. The poultry feeds pellet plant has good raw material versatility and can be used for the granulation of various raw materials such as corn, sorghum, wheat, beans, and oilseed meal. At the same time, the poultry feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service. Some Questions About the Poultry Feed Mill Plant 1. Who is Suitable for This Poultry Feed Mill Plant? This poultry feeds mill plant is specially designed for farmers, animal farm plants, animal feed suppliers, etc. 2. What Raw Material Can Use in The Poultry Feed Mill Plant? Poultry feed mill plant raw materials include corn/maize, wheat, grass, alfalfa, oilseed meal & cakes, pasture, bone meal, microelements, etc., and other kinds of raw materials, such as premix, vitamins, wheat bran, salt and other. Different formulations can be made according to different formulas and the needs of the animals being farmed. 3. What Kind of Poultry Feed Pellet Production Line Can Produce? This feed pellet production line can produce feed for meat chicken, broilers, laying hens, small baby chicken feed, cattle feed, pig feed, duck feed, sheep feed, poultry feed, livestock feed, goat feed, etc. Such as 2-4mm diameter chick feed pellets and pig feed pellets. 2-5mm rabbit feed pellets, 4-8mm cattle or sheep feed pellets. This feed pellet mill with ring dies, makes pellets of 2-10mm in diameter, the pellet size can be changed with our feed pellet machine by adjusting the die. 4. Why Choose Our Poultry Feed Production Line? Widely Applications: This poultry feed pellet mill plant can make feeds for poultry, livestock, sheep, pig, cattle, chicken, duck, and other animals, it makes pellets of 2-12mm in diameter, and the pellet size can be changed with our feed pellet machine by adjusting die. Small Investment: the compact design of this feed mill plant can reduce the investment in workshops etc. Low Installation Cost: our poultry feed production line comes with detailed installation and commissioning instructions, it is easy to install the machine, and you can use it immediately after the machine is installed. Low Production Cost: The poultry feed factory only needs a few production workers to complete the production operation. With less labor and lower production costs, your profits will increase. 5. What Can We Do for You? We can provide the project design, flow chart, feed-making machine manufacturer, the project installation and commission, your staff training, after-sales service, etc. Also, our professional install team will serve you if you need it.

Minimum Order: 1 bags

At Royal Canin we put the animal first in everything we do. Every decision we make is based on years of study in our own centre and on partnerships with veterinary schools, universities and breeders. The aim is always the same, to provide precise nutritional solutions to meet the need of your pet. Those needs can be very different and one food does not suit all. Age, breed, size and lifestyle are all taken into account. We were the first to meet the different needs of small, medium and large breeds, and to develop breed specific foods. Natural defences: Helps support the dog's natural defences, thanks particularly to an antioxidant complex and manno-oligo-saccharides. High digestibility: Helps promote optimal digestibility thanks to an exclusive formula including very high quality proteins and a balanced supply of dietary fibre. Omega 3: epa - dha: Enriched formula with Omega 3 fatty acids (EPA-DHA) to help maintain a healthy skin. High palatability: Satisfies the appetite of medium breed dogs thanks to carefully selected flavourings. Suitable for Medium sized dogs (11-25kg) from 1 - 7 years. HOT PRODUCTS Royal Canin maxi junior 15kg Royal Canin gaint starter 15kg Royal Canin gaint adult 15kg Royal Canin gaint junior 15kg Royal Canin gaint puppie 15kg Royal Canin mini starter 15kg Royal Canin mini adult 15kg Royal Canin mini junior 15kg Royal Canin medium starter 15kg Royal Canin medium adult 15kg Royal Canin medium junior 15kg royal canin maxi adult

Minimum Order: 5000