Filters & Boilers

Wire Mesh Screen for Sale Our high-performance woven industrial mesh screen, self-cleaning wire screen, and PU-Mesh are tailored and customized to meet your specific screening challenge. Years of examinations and innovations of wire mesh screen material made Anpeng one of the best wire screen suppliers worldwide. Woven Wire Mesh Available in Square and Slotted Meshes, High quality steel grade used in production and a wide range of wire diameters and openings ensuring their cost- effective work in almost any applications. PU Mesh Ideal for the classification of high-humidity or wet materials because of the Polyurethane coating on the wires. PU-Mesh is extremely light, flexible, easy to install and waterproof with improved wear life and high cost-effectiveness. Square PU Mesh PU-Mesh Screens are steel braided wire mesh coated with abrasion-resistant polyurethane in either fully welded or partially welded style. Light and flexible, which makes the PU Mesh extremely impact resistance. Slotted PU Mesh Slotted PU-Mesh Screens has slotted openings, and greater open area than Square PU-Mesh and therefore higher throughput. Slotted PU Mesh Materials Available for Anpeng As an industrial screen manufacturer, we use High Tensile Steel that is abrasion resistant, which is ideal for applications facing significant wear such as filtering rocks, sand and gravel. Polyurethane: is known for its high load bearing capacity in both tension and compression, and its abrasion and impact resistance property, Polyurethane is extremely wear proof in challenging applications even at very low tempreture. High Tensile Steel Wires For Anpeng Wire Mesh High Tensile Steel Wires Compare to common carbon steel, high tensile steel contains additional alloys like silicon, manganese, chromium, and nickel. That's why it is abrasion resistant, which is ideal for applications facing significant wear such as filtering rocks, sand, and gravel. If you want to know more about screening media, please visit our website.

Minimum Order: 100

1. Plates and Frame are fully S.S.304 material. It can meet the food degree. 2. It can ensure high pressure and temperature, so that could used in more fields, get lowest moisture and most output. 3. Manual Jack closing is practical and cost saving. Basically ZERO running cost. 4. Plate & Frame structure designed for easy operation and maintenance. 5. The flatness of the filter plate is lower than 25μm can perfectly avoid leakage. 6. Every plates is tested under high closing pressure 21 MPa. 7. All structure is also coated by S.S.304, so that easy to clean and serves longer. 8. Main beam is made of high quality SS304 with sand blasting processing and it is of high intensity and corrosion resisting. 9. All beams are produced by making use of submerged arc auto welding technology. 10. The filter cloth is pure cotton material, so that non-toxic, odourless.

YC-301 reverse vending machine (RVM) is aim at the market of non-deposit. This Recycle Vending Machines offers a simple and clean design, is charecterized by 42" LED display, ideal for wrapping advertisment and branding. YC-301 takes one-way, non-refillable plastic bottles and cans. YC-301 Recycle Vending Machines also support for multiple reward system to operate money reward, redemption schemes, RFID and NFC card rewarding and etc. Meanwhile, it also support for third party customized system, can offer the comprehensive system plan of local market. ● Collection of plastic bottles and/or cans ● Optical fraud protection and hand protection modules ● 42" multimedia interactive display ● Equipped with high speed printing module (Non-standard) ● IMP system accessible ● Support for plug-and-play

H-10/H-11 THE ENGAGING (For Sale) The H-10 and H-11 reverse vending machines (RVM) offer a clean and robust design, with multiple recognition functions, ideal solution for receiving low to medium volumes of containers. H-10 and H-11 take one-way, non-refillable containers (Such as galss bottles). Additionally, H-11 is equipped with a SoftDrop™ safelanding unit to receive refillable containers perfectly. Both H-10 and H-11 feature a touch screen with a large, 21.5"display, provide a good user experience and suited for branding and promotional activities.

The H-10 and H-11 reverse vending machines (RVM) offer a clean and robust design, with multiple recognition functions, ideal solution for receiving low to medium volumes of containers. H-10 and H-11 take one-way, non-refillable containers (Such as galss bottles). Additionally, H-11 is equipped with a SoftDrop™ safelanding unit to receive refillable containers perfectly. Both H-10 and H-11 feature a touch screen with a large, 21.5"display, provide a good user experience and suited for branding and promotional activities.

H-30 reverse vending machine (RVM) is the new released model with new upgrade technology of INCOM TOMRA. With fuzzy shape, barcode, full container detection and metal recognition technologies, H30 Tomra Bottle Return Machine is ideal for low to medium volume of non-refillable container. ● 21.5" touch screen for promotion ● Build-in Combi PET/CAN crusher and sorting ● Automatically infeed and rotate module (TranRot) ● Optical fraud protection ● "Plug & Play", powerd by single phase

HTG Series Ceramic Vacuum Filter for Solid-liquid Separation, Ceramic Filter Plant We are a professional manufacturer of ceramic filters. It is a national high-tech enterprise with innovative design concepts, rich design experience and leading research and development equipment. In the past 30 years, it has provided HTG full-automatic ceramic filter with superior performance, high efficiency, energy saving and environmental protection for many domestic and foreign customers. HTG full-automatic ceramic filter is new, efficient, energy-saving and environment-friendly high-tech dewatering equipment that integrates micro- porous ceramics, electromechanical and ultrasonic technologies and automatic control. It has many national inventions patents and is National Key New Product. It is the unit in charge of taking the lead to draft the national industry standard. At present, it is applicable to multiple fields .Filtering area of products ranging from 1 to 240 m2, provide users with more and better choices. Product Features Dewatering & drying performance with high vacuum and good filter cake, high productivity and excellent solids recovery. Clear filtrate, neat work environment, and all-directional environmental protection system without pollution PLC program control, high automation, easy operation, and high utilization of equipment. Compact design, high performance, ultra-low operating and maintenance costs, and remarkable energy saving. Ceramic filter plate has a long service life and wide application. Technical Specifications Model Parameter HTG01/1 HTG06/3 HTG09/3 HTG12/3 HTG15/3 HTG18/3 HTG21/3 HTG24/3 HTG30/3 Filtration area 1 6 9 12 15 18 21 24 30 Installed power 6 8 10 11 14 15 15 15 18 Weight(t) 2.2 5.6 7.9 8.5 9.2 9.9 10.2 11.2 12.8 Length (mm) 1910 3062 4170 4360 4770 4780 5375 5453 6318 Width(mm) 1900 3025 2935 3200 3200 3200 3200 3200 3400 Height (mm) 1780 2750 2750 2750 2750 2750 2750 2750 2750 Model Parameter HTG45/3 HTG51 / 3.75 HTG45 / 3.75 HTG60/4 HTG80/4 HTG15/5 HTG20/5 HTG25/5 HTG30/5 Filtration area 45 51 45 60 80 15 20 25 30 Installed power 22 22 22 30 40 17 17 18 20 Weight(t) 15.6 13.1 12 18.5 24 7 7.2 7.9 9.5 Length (mm) 7998 6300 6100 8054 9562 3930 4470 4690 4810 Width(mm) 3410 3020 3020 3150 3510 3410 3510 3510 3510 Height (mm) 2750 2720 2720 3270 3233 2980 2980 2980 3035 Model Parameter HTG45 /5 HTG50 /5 HTG60 /5 HTG80 /5 HTG100 /5 HTG120 /6 HTG144 /12 HTG180 /12 HTG204 /12 HTG240 /12 Filtration area 45 50 60 80 100 120 144 180 204 240 Installed power 22 22 29 39 43 57 67 114 116.8 121 Weight(t) 11.3 12.5 14 18.5 23 25 28.5 39 42 45 Length (mm) 5470 5690 6130 7253 8094 9437 7260 9670 10470 11670 Width(mm) 3510 3510 3510 3510 3510 3565 5330 5330 5330 5330 Height (mm) 3035 3035 3035 3035 3035 3295 4786 4786 4786 4786 Customizable

Superheater Coil Made of Carbon Steel for Industrial Boilers and Power Plant Boiler Application Description A superheater is a component that heats saturated steam in an industrial boiler, turning it into superheated steam. Our superheater guarantees that the superheated steam temperature will fluctuate to within an allowable range (normally varies from 540℃ to 550℃) when the boiler is over loaded. Superheaters and reheaters are important parts for the heating surfaces, used to increase steam temperature, aiming to improve steam enthalpy and further to increase the thermal circulation efficiency for power station. The superheater, reheater and economizer of the boiler adopt serpentine tube heating surface. Due to a series of characteristics such as large number, different bending radius and many welded joints, the manufacturing process of serpentine heating surface is more complex and the productivity is lower. In recent years, in order to change this backward production appearance, China's major boiler plants have taken a series of measures in design and technology to improve the universality of product parts and components, creating necessary conditions for the mechanization, automation and organization of automatic production lines of serpentine pipe production. At present, China's major boiler plants have adopted automatic production lines with program control for the manufacture of coil heating surfaces. Industrial Boiler Economizer Superheater Coil For Enthalpy Improve 0 Differences Type Advantages Disadvantages Supporting method Pendant-type 1.Firm structural support 1. Flow blockage by condensed steam 2. Needs slow restart to purge the water that accumulates in the bottom. supported from above Inverted-type 1.Proper drainage of the condensed steam 1. Lack the structural rigidity, especially in high speed gas flow Supported from below Horizontal -type 1. Proper drainage 2. Good structural rigidity. 1. They do not view the flam directly so they are mainly from the convective type Usually supported in the vertical gas ducts parallel to the main furnace.

PPS Star Filter Bag Pleated Bag 160mm Extended Filter Surface Bag Description The pleated/star-shaped filter bag, as the name implies, is a pleated filter bag. When selecting the correct pleated/star-shaped filter bag, the number of folds, the depth of the folds, the choice of filter media, the coated star/pleated cage, and the cleaning system must be considered.Upgrading existing baghouses to increase capacity has been a major success story for pleated/star filter bag. New baghouses designed around the pleated/star filter bag save space as well as cost with reduced operating costs and downtime. Pleated/star filter bags increase filtration surface area up to 140%. Custom sizes can be made as required to replace existing standard bag and cage. Characteristics Style star bag, pleat bag, extend surface/area bag Pleats No. 8 pleats Material PPS Diameter 160 mm Length TBD mm Strap / band Type cut felt strap afixing thread sewing to bag Width 25 mm Distance 250 mm Top Opening 160 mm Cuff Type seal cuff Width 10-12mm Thickness 8-10mm Distance 4-8mm Metal hoop inside of top yes material 304 stainless steel width 25-30mm Fix sew to bag body Boot / Bottom Diameter 160 mm Height 100-120 mm Reinforcement two layers Bottom disc two layers Metal hoop no, 20-25mm 304 stainless steel if yes Fix sew to bag body Seam Type thread sewing Bag panel/body triple rows sewing Cuff panel 2 double rows sewing boot upper 2 double rows sewing boot bottom double rows sewing Pack Poly bag and pallet, or carton and pallet

1.Scope of application cutting fluid, tensile emulsion, cold rolling emulsion, semi-synthetic coolant, fully synthetic coolant, cleaning fluid. 2.Working principle When the cutting fluid is sent into the equipment through the oil transfer pump, when the cutting fluid and impurity particles enter the separation rotor, they are subjected to strong centrifugal force (up to 2000 times the gravity of the impurity self weight), the cutting fluid and impurities move radially to the internal surface of the rotor, and the cutting fluid and impurities are compressed into a thick layer. Due to the different effects of centrifugal force, the cutting fluid flows back to the transfer tank along the reflux tank, and the impurities are adsorbed to the inner surface of the separator and gradually solidified, so as to separate the impurities from the cutting fluid and continuously improve the cleanliness of the cutting fluid. 3.Technical parameters Model Number:LC-SJ-HWM-G Scope of application:Water-Based Filtration Method:Centrifugal Separation Slag Discharge Mode:Automatic Slag Discharge Start Mode:Soft Start Power Supply Data:Three Phase AC 38V 50Hz Total Power (Kw):48 Control Panel:Siemens Touch Panel Drum Capacity (L):20 Drum Speed (r/min):11600 Centrifugal Effect:99% Working Pressure (Mpa):0.4 Working Noise:≤75 dB(A) Maximum Handling Capacity:6000 Recommended Flow (L/H):6000 Working Temperature For Oil (℃):45 Oil Content After Purification:<5% Impurity Content In Filtered Oil:<5% Filtering Accuracy (μm):2 HS Code:8421299090 Equipment Size (mm):1300*950*1700 Package Size (mm)：1480*1080*1750 Net Weight (kg):830 Gross Weight (Kg):880 4.Benefits to customer 1) Under the same conditions, the service life of cutting fluid will be extended at least twice; 2) Reduce the cost of hazardous waste treatment by at least 75%; 3) Process cutting fluid without shutdown; 4) Prolong the service life of cutter and machine tools; 5) Improve the machining accuracy of workpieces and reduce defective products; 6) Improve the factories’ environment ,solve the odor problem and reduce the turnover rate; 7) Improve environmental protect.

Minimum Order: 1 bags

1.Scope of application Lubricating oil, hydraulic oil, turbine oil, transformer oil, gear oil, cutting oil, cleaning oil, rolling oil, cooling oil, engine oil, guide rail oil, stamping oil, antirust oil, spark engine oil, phosphate oil, water glycol, etc. 2.Working principle The oil purification device is a three-phase separation of particulate matter, oil, and water medium, and the sedimentation separation formed according to different densities, and the sedimentation is accelerated under the action of centrifugal force.Through the centrifuge, the sedimentation acceleration evolves into the circumferential acceleration. The separated material is sent into the heart of the machine, that is, inside the barrate. Under the action of strong centrifugal force, the material passes through the separation interval of a group of disc bundles. The disc wall moves out of the neutral hole, where heavy slag accumulates in the sediment area, and the heavy phase flows upward to the centripetal pump; the liquid with a smaller specific gravity moves along the disc wall into the neutral hole and converges to the lower centripetal pump The light and heavy phases are respectively output by the lower centripetal pump and the upper centripetal pump; the heavy slag is discharged regularly; continuous production is implemented. 3.Technical parameters Model Number:LC-YJ-HWM-G Scope of application:Oil-Based Filtration Method:Centrifugal Separation Slag Discharge Mode:Automatic Slag Discharge Start Mode:Soft Start Power Supply Data:Three Phase AC 38V 50Hz Total Power (Kw):48 Control Panel:Siemens Touch Panel Drum Capacity (L):20 Drum Speed (r/min):11600 Centrifugal Effect:99% Working Pressure (Mpa):0.4 Working Noise:≤75 dB(A) Maximum Handling Capacity:12000 Recommended Flow (L/H):6000~12000 Working Temperature For Oil (℃):45 Moisture after Processing (ppm):<500 Oil Cleanliness (NAS):Maximum level 5 Filtering Accuracy (μm):2 HS Code:8421299090 Equipment Size (mm):1300*950*1700 Package Size (mm)：1480*1080*1750 Net Weight (kg):660 Gross Weight (Kg):730 4.Benefits to customers 1) According to the working conditions, under the same conditions, it can prolong the service life of lubricating oil at least twice; 2) Reduce the cost of hazardous waste treatment by at least 75%; 3) Reduce the cost of downtime due to oil change and increase productivity; 4) Prolong the service life of lubrication parts and reduce associated maintenance costs; 5) Water removal that directly avoids the side effects of oil emulsification; 6) Improve the factories’environment ,solve the odor problem and reduce the turnover rate; 7) Improve environmental protection of waste liquid discharge.

Minimum Order: 1 bags

Turbine Oil Service is an extremely important and integral part of the performance of a turbine and the lubricant system. ASSEN has the professional research team to support your maintenance program to increase system efficiencies and decrease maintenance costs. TY turbine oil purifier is designed for purifying the waste turbine oil, especially the seriously emulsified turbine oil. This machine can fast and effectively remove the water, gas and impurities, aim at turbine oil’s nature of high water content, easy emulsifiable and high impurity content, and make the oil recover the new oil’s nature. Features: 1. The TY series integrate the gravity method, evaporation method, coacervation, vacuum separation and mechanical purification, utilizing coacervation, molecular absorption, vacuum drying and automatic demulsifying technologies which are capable of separating large and minimal amount of water from oil. Its high water removal and demulsifying efficiency makes turbid oil to be clear and limpid. 2. The precision multi-stage filter element can remove effectively various impurities, as it is a stage-to-stage densified filter element which could accommodate large amount of impurities and has a longer lifetime. 3. The advanced infrared level automatic control system, voice & light automatic alarm system and the pressure protection device ensure a safe and reliable operation. 4. Turbine oil and low viscosity lubricant oil can be treated online. 5. 8 models to satisfy different needs of flow rate. Key words turbine oil purify, turbine oil clean, lubricating oil clean, lubricating oil recycle, turbine oil recycle, turbine oil reuse, turbine oil treatment

Minimum Order: 1 bags

Application Transformer oil is a mineral based oil that is commonly used in transformers for its chemical properties and dielectric strength. This oil in your transformer acts as an insulator and a cooling medium. Over time, the oil will degrade resulting in the potential for faults and costly repairs. if you proper maintain the transformer oil, you can avoid any costly down time and expensive repairs. Our ZY Portable single stage vacuum transformer oil purifier is designed to remove the water, gas, and impurities in the waste transformer oil. After treatment, the oil can be used as new oil. Features 1. It is a portable and small size machine, which is easy to move. 2. The purifier can remove water, gas and impurities in oil with high efficiency to elevate the withstand capability and quality of oil, which ensures a safe operation of power generation equipment. 3. It equips the infrared liquid level automatic control device, system automatic pressure protector, high efficient water and gas removing components. it is easy operate and safe. Item Unit ZY-10 Flow Rate L/h 600 Vacuum Degree MPa -0.06 ～ -0.095 Working Pressure MPa ≤0.4 Temperature Range ℃ 20-80 Continuous Working H 720 Power Supply ∽50Hz 380V(or as needed) Working Noise dB(A) ≤75 Heating Power KW 11 Total Power KW 12.5 Inlet (outlet)Caliber mm 25 Weight Kg 230 Length mm 1050 Width mm 750 Height mm 1300

Minimum Order: 1 bags

Application Dissolved gasses in transformer oil can cause arcing, corona discharges, and overheating–reducing the electrical efficiency and lifetime of the transformer.So we need to clean used transformer oil.Assen ZYD-I transformer oil regeneration system is designed to completely regenerate insulating oils in de-energized transformers. Our machine provides regular oil purification and meanwhile, it can remove acidity, sludge, other soluble oil decay products and discoloration. Performance: In a single pass through the purifier at a full flow rate: Water Removal: From 50 ppm down to less than 5 ppm in a single pass & down to 3 ppm after two passes. (According to the PPM Tester) Gas Removal: From fully saturated with air (10% to 12% by volume) down to less than 0.1% by volume. Particulate Matter Removal: 98% of particles over 0.5mm or over 1 mm or over 5mm at customers preference. Dielectric Strength: Improve dielectric strength up to 75-80KV for New oil. Acid Removal: after treatment, the acid value will down to less than 0.1mgKOH/g Free Carbon Removal: there is no free carbon after treatment Oil Regeneration Machine's Technical Parameters Parameters Unit ZYD-I-30 ZYD-I-50 ZYD-I-100 ZYD-I-150 ZYD-I-200 ZYD-I-250 ZYD-I-300 Flow L/min 30 50 100 150 200 250 300 Working vacuum MPa 0.08 ～ 0.099 Working Pressure MPa ≤0.4 Temperature Range ℃ 20 ～ 80 Power   Three Phase 50HZ380V(as per the customer’s requirements) Working Noise dB（A） 75 75 75 80 80 80 80 Heating PowerkW 30 40 60 90 120 150 180 Total PowerkW 35.5 41.5 62.5 95.5 128.5 159.5 192 Inlet/Outletmm φ25 φ32 φ42 φ50 φ50 φ60 φ60 Weight kg 400 550 800 950 1100 1300 1600 Length mm 1350 1480 1850 1950 2100 2150 2250 Width mm 1320 1450 1810 1900 2000 2100 2200 Height mm 1350 1460 1860 1930 2150 2200 2300

Minimum Order: 1 bags