Fiberglass

High-quality, sturdy and durable FRP Garbage Can, made of fiber reinforced plastic (FRP), has the characteristics of high density, high rigidity, high pressure resistance, corrosion resistance, aging resistance, light weight, and beautiful appearance. It is widely used to provide cleaning services in the industries of hotel home furnishing, leisure and entertainment, communications, sanitation, property, decoration, construction, and chemical industry. FRP Garbage Can for storing unnecessary waste Product material: FRP (fiber reinforced plastic) Size width: can be customized

Runto New Materials is one of the most experienced and well-known manufacturers and suppliers of FRP Pultrusion Profile, GRP profiles and CFRP profiles in China. Runto New Materials is a well-known supplier among several leading manufacturers and distributors of FRP profiles, GRP profiles and CFRP profiles because it improves quality by providing high-quality profiles and GRP pipes on the market. Pultrusion is a continuous process using fiber reinforcements with thermosetting resin matrices. Pre-selected reinforcement materials, such as fiberglass roving, mat, woven fabrics or stitched fabric, are drawn through a resin bath in which all material is thorougly impregnated with a liquid thermosetting resin. Typical resins include polyesters, vinyl esters and phenolics. The wet-out fiber is formed to the desired geometric shape and pulled into a heated steel die. Once inside the die, the resin cure is initiated by controlling precise elevated temperature. The laminate solidifies in the exact cavity shape of the die, as it is continuously pulled by the pultrusion machine. Most any constant cross-section part can be pultruded. Then the product is passed through the mold by the puller clamping mechanism and cut into the required length with a saw. FRP Pultrusion Profile specifications: Round bar: D2mm-20mm Round tube: OD3mm-38mm Square tube: OD12mm-100mm Grooved rectangular rod T-shaped and H-shaped C shape Leg angle Performance characteristics of FRP pultruded profiles 1. Corrosion resistance The pultruded profile has excellent corrosion resistance, can withstand various degrees of acid, alkali, organic solvents and salts and other gas and liquid media corrosion, never rust, according to the actual use of the medium type and temperature requirements, there are neighbors Benzene type, isobenzene type, vinyl type, etc. are available for selection, please refer to the corrosion resistance table of pultruded profiles. 2. Lightweight and high strength The glass fiber content of the pultruded profile is higher than other composite material forming processes, so the longitudinal strength is quite high, which is equivalent to that of steel. The density of pultruded profile is only about one-fourth of that of steel, so the specific strength is much higher than that of steel. The modulus of pultruded profile is much higher. It is lower than steel, usually only 1/7-1/10 of steel. 3. Anti-aging The pultruded profile is made of high-quality thermosetting resin and glass fiber system, which is different from general thermoplastics, and the normal service life of the product can reach 20 years. The best anti-aging effect can be obtained by adding anti-ultraviolet agent and using polyester fiber felt. 4. Easy to maintain The pultrusion profile is made by blending the pigment into the resin. The color of the product can be arbitrarily blended according to customer requirements. It is not easy to fade, does not require paint maintenance and has a self-cleaning effect. 5. Excellent electromagnetic performance The pultruded profile has excellent electrical insulation, no electromagnetism and electric sparks, and can be used in equipment areas where there is a risk of electrical conduction and sensitive to magnetism, as well as in flammable and explosive places. 6. Thermal performance Pultrusion profile is a kind of thermal insulation material with a much lower coefficient of thermal expansion than ordinary plastics. Pultrusion has excellent mechanical properties at low temperatures and will not melt at high temperatures, but its strength and modulus will be reduced to a certain extent at high temperatures. , Generally, the applicable temperature range of pultruded profiles is -50℃-100℃. Glass fiber profile application FRP piles are widely used in gardens and agriculture to support plants such as vines, grapes, trees, flowers, flagpoles, brackets, travel tents, kites, umbrellas, and shaft model airplanes.

FRP Pipe is manufactured on a continuous filament winding machine. This machine consists of a mandrel composed of a helical wound continuous steel band, supported by beams forming a cylindrical shape. As the formed mandrel turns creating a multi-layered structural wall of the required thickness. GRP (Glass Reinforced Plastic) or FRP (Fiber Reinforce Plastic) piping systems are available in a variety of standard diameters ranging from 15mm to 4200 mm. RUNTO offers GRP (FRP) pipe and fittings to meet all national and international standards depending on the area and application. Characteristics of FRP Pipe 1) Good Corrosion-resistant property; Has good corrosion resistance. There is no need for cathodic anticorrosion protection and other anticorrosion measures, and it will not form secondary pollution to water and other media. 2) Lightweight, high strength; The product has a long service life. The net weight of the pipe is only 1/4 of the ductile iron pipe of the same size and length, and 1/10 of the cement pipe. 3) Installation conveniently; Convenient transportation and unloading, easy to install. Reduce pipe joints, speed up the installation rate, and improve the quality of the entire pipeline. 4) Smooth inner surface has good property of circulation; Reduce flow resistance, increase flow rate, and reduce energy consumption. Using a smaller diameter pipeline to transport the same flow of fluid can increase the flow by about 10% compared with the same size steel pipe. 5) Good low temperature-resistant; 6) Good thermal insulation. Application range of Runto FRP pipeline: 1. Chemical medium transportation pipeline 2. Domestic water transportation trunk pipes and water distribution pipes 3. Sewage collection and transportation pipeline 4. Pressure water pipes for micro hydropower stations on the road, circulating water pipes for power plants 5. Heat energy transmission pipeline, sea water transmission pipeline 6. Vacuum tube, external pressure tube and siphon tube 7. Agricultural machinery irrigation pipes 8. Oilfield water injection pipes and crude oil pipelines

FRP Storage Tank Description Runto New Materials provides a wide range of solutions for storing fluids or solids. These solutions are made of all FRP materials or double-layer laminated materials. The choice of materials makes Runto New Materials' storage tanks easy to install in different environments. Based on experience, we know that every application has its specific requirements. Runto New Materials' storage solutions include detailed engineering, manufacturing, transportation and installation of all components. Runto New Materials' FRP and double-layer laminated storage solutions are designed to comply with all international standards such as DIN, AD N1, ASME, RTP-1 and ISO. FRP vessels can be divided 1. By shape: Horizontal FRP Vessel Horizontal FRP vessel, also called horizontal FRP tank, is a device composed of an impermeable and corrosion-resistant inner layer, a solid structural layer, an anti-aging outer layer, a head, a nozzle, and a saddle. Flat Bottom FRP Vertical Vessel Flat Bottom FRP Vertical Vessel is manufactured by Italian technology. The inner bladder is injection molded, and the resin content of the inner bladder resin layer is 95%. The lining resin content is 80%. The inner bladder of the tank adopts a syringe mold, the straight section of the tank body is seamlessly connected with the upper head, and the structural layer of the tank body is integrally wound. The storage tank has light weight, high strength, strong corrosion resistance and long service life. 2. By manufacturing method: Shop vessel (within DN 4m), on site vessel (DN 4m - 25m), including FRP vessels combined with PVC, CPVC, PP, PE, PVDF, etc. 3. By application: Chemical storage, reaction kettle, scrubbing tower, spray tower, food fermentation, ultrapure water Characteristics of FRP Storage Tanks 1, light weight, high strength: relative density between 1.5 and 2.0, only carbon steel 1 / 4 to 1 / 5, but the tensile strength is close to or even more than carbon steel, and specific strength can compared with high-grade alloy steel. 2, good corrosion resistance: the atmosphere, water and the general concentration of acid, alkali, salt, and a variety of oils and solvents have better resistance. 3, excellent electrical properties: can be used to manufacture the insulator. 4, excellent thermal performance: 5, excellent technology: according to the shape of the product, technical requirements, the use of flexible selection of molding process; process is simple, can be a one-time molding, economic effect is outstanding. Application range of FRP Storage Tanks Medium application: 1. hydrochloric acid, sulfuric acid, phosphoric acid, nitric acid, organic acid, hydrofluoric acid, fluoride, saline, sewage etc.; 2. food grade (vinegar, soy sauce, water, etc.); 3. polyvinyl chloride (FRP/PVC), polypropylene (FRP/PP), etc. Industry application of FRP Tanks FRP tanks are widely used in petroleum, weaving factory, food brewing, electric power engineering, printing and dyeing factory, water supply and drainage engineering, chemical industry, seawater desalination, transportation, biological medicine, water conservancy irrigation and national defense engineering and other fields.