Fiber Optic Equipment

Pre-Connectorized OptiTap to SC/APC Drop Cable Hardened Corning OptiTap Flat Cable 4mm*8mm OptiTap/H connector assemblies provide a robust and sealed connection solution for fiber to the home (FTTH) connectivity. The hardened connector end incorporates an SC/APC type connection within a slim, sealed, threaded polymer housing allowing easy connection to either a multiport terminal or in-line extension receptacle. The SC/APC connector mates to a standard adapter, providing a common interface for FTTH applications. Available with flat drop or traditional round style OSP cables, the hardened connector provides an ideal solution for direct burial, conduit, or aerial installations. Features: 1. Compatible with Corning-OptiTap and H-Connector; 2. Factory terminated for high performance; 3. Available with one or both ends connectorized; 4. Hybrid (one end with an OptiTap Connector, one end with standard SC connector) available with or without pulling grip; 5. Available in dielectric or toneable; 6. Designed for aerial, direct-buried or duct installation; 7. IP-68 water and dust protection ; 8. -40℃~85℃ operating temperature; Pre-Connectorized OptiTap To SC/APC Drop Cable Hardened Corning OptiTap Flat Cable 4mm*8mm 0 Pre-Connectorized OptiTap To SC/APC Drop Cable Hardened Corning OptiTap Flat Cable 4mm*8mm 1

Product Description GYFTY53 Non Metallic Fiber Optic Cable Strong Moisture Resistance 1.Stranded Loose Tube Non-metallic Strength Member Light-armored Cable GYFTY53 Product Description: The fibers, 125μm, are positioned in a loose tube made of a high modulus plastic.The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of core as a non- metallic strength member.The tubes (and fillers) are stranded around the strength member into a compact and circular core.After the cable core is filled with the filling compound to protect it from water ingress, the cable is completed with a thin polyethylene(PE) inner sheath. A layer of water- blocking tape is applied around the cable core to prevent water ingress all the same.After a corrugated steel tape armor is applied,the cable is completed with a PE outer sheath. 2. Features: ♦ Excellent mechanical and temperature performance ♦ Special tube filling compound ensure a critical protection of fiber and resist the water. ♦ Non-metallic central strength member FRP withstand axial loads. ♦ Inner sheath effectively lower the external mechanical loading. ♦ Corrugated steel tape longitudinal cover cable core and provide good crush resistance. ♦ PE sheath protects cable from ultraviolet radiation. ♦ 100% core filling water prevent cable jelly to ensure the cable watertight. 3. Application: ♦ Frequent lightning area and anti electric field : The subway, tunnel ♦Long-distance communication: Local trunk network & User network ♦ Duct and direct buried application ♦ Harsh environment 4.Optical Characteristics: Item G.652 G.655 50/125um 62.5/125um Attenuation @850nm ≤3.0dB/km ≤3.2dB/km @1300nm ≤1.0dB/km ≤1.2dB/km @1310nm ≤0.36dB/km ≤0.40dB/km @1550nm ≤0.22dB/km ≤0.23dB/km Bandwidth (Class A) @850nm ≥500MHZ.km ≥200MHZ.km @1300nm ≥1000MHZ.km ≥600MHZ.km Numerical aperture 0.200±0.015NA 0.275±0.015NA Cable cut-off wavelength ≤1260mm ≤1450mm Technical Parameters Cable Type Fiber Count Tubes Fillers Cable Diamete rmm Cable Weight kg/km Tensile strength Long/Short term (N) Crush resistance Long/Short term (N/100mm) Bending radius Static/Dynamic (mm) GYFTY53-2~6 2~6 1 5 12.0 155 1000/3000 1000/3000 12.5D/25D GYFTY53-8~12 8~12 2 4 12.0 155 1000/3000 1000/3000 12.5D/25D GYFTY53-20~24 20~24 4 2 12.0 155 1000/3000 1000/3000 12.5D/25D GYFTY53-32~36 32~36 6 0 12.0 155 1000/3000 1000/3000 12.5D/25D GYFTY53-38~48 38~48 4 2 12.0 155 1000/3000 1000/3000 12.5D/25D GYFTY53-50~60 50~60 5 1 12.0 155 1000/3000 1000/3000 12.5D/25D GYFTY53-62~72 62~72 6 0 12.0 155 1000/3000 1000/3000 12.5D/25D GYFTY53-86~96 86~96 8 0 13.8 170 1000/3000 1000/3000 12.5D/25D GYFTY53-134~144 134~144 12 0 16.8 205 1000/3000 1000/3000 12.5D/25D Environmental characteristics Operating temperature -40~+70℃ Storage temperature -40~+70℃ GYFTY53 Non Metallic Fiber Optic Cable Strong Moisture Resistance 0GYFTY53 Non Metallic Fiber Optic Cable Strong Moisture Resistance 1

Product Description Sc To Sc Single Mode Patch Cord Ftth Fiber Optic Jumper Cable Sc To Sc Fiber Optic Cable Jumper Fiber Optic Cable Patch Cord Ftth Optical Fibers 1. Description Fiber optic patch cord is a fiber optic cable capped at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch, or other telecommunication equipment. Having a thick layer of protection, it is used to connect the optical transmitter, receiver, and the terminal box. This is known as "interconnect- style cabling". 2. Specification Product Name Fiber optic patch cable Connectors LC, SC, ST, FC, MU, DIN, D4, MPO, SC/APC, FC/APC, LC/APC, MU/APC Fiber Singlemode/Multimode 50/125, 62.5/125 (Multimode) OM2&OM1 50/125, 10G (Multimode) OM3 Cable Simplex, Duplex Φ3.0mm, Φ2.0mm, Φ0.9mm PVC or LSZH Polishing Manner UPC,SPC,APC (8°& 6°) Insertion Loss ≤ 0.1dB (For Singlemode Master) ≤ 0.25dB (For Singlemode Standard) ≤ 0.25dB (For Multimode) Tested by JDS RM 3750 Return Loss (Singlemode) UPC ≥ 50dB SPC ≥ 55dB APC ≥ 60dB (typ.65dB) Tested by JDS RM3750 Repeatability ±0.1dB Operating temperature -400C to 850C Geometry Requirement ( Singlemode) Ferrule Endface Radius 7mm ≤ R ≤ 12mm (For APC) 10mm ≤ R ≤ 25mm (For Standard) Apex Offset ≤ 30 μm (For Master) Apex Offset ≤ 50 μm (For Standard) Undercut -50nm ≤ U ≤ 50nm Tested by DORC ZX-1 3. Product list Boot Connector Fiber Type Cable number Ferrule Connector 0.9mm 2.0mm 3.0mm LC FC SC ST MU D4 MTRJ MPO DIN 9/125um SM 50/125um MM 62.5/125um MM OM3 OM4 Simplex Dup , lex Multi-fiber Ribbon PC , APC UPC 1M 2M 3M4M , 5M ......... Customized < , br> 4. Features 1). Low Insertion loss 2). High return loss 3). Good Repeatability 4). Good Interchange 5). Excellent Environmental Adaptability 5. Application 1). Communication rooms 2). FTTH (Fiber to The Home) 3). LAN (Local Area Network) 4). FOS (fiber optic sensor) 5). Fiber Optic Communication System 6). Optical fiber connected and transmitted equipment 7). Defense combat readiness 6. Product pictures: Sc To Sc Single Mode Patch Cord Ftth Fiber Optic Jumper Cable 0 Sc To Sc Single Mode Patch Cord Ftth Fiber Optic Jumper Cable 1 Sc To Sc Single Mode Patch Cord Ftth Fiber Optic Jumper Cable 2 Sc To Sc Single Mode Patch Cord Ftth Fiber Optic Jumper Cable 3 Sc To Sc Single Mode Patch Cord Ftth Fiber Optic Jumper Cable 4

High dense connection, easy for operation SC APC Fiber Optic Patch Cord for FTTX + LAN A patch cord is a fiber optic cable used to attach one device to another for signal routing. SC stands for Subscriber Connector- a general purpose push/pull style connector. It is a square, snap-in connector latches with a simple push-pull motion and is keyed. Features: Low insertion loss, high return loss High dense connection, easy for operation High credibility and stability Good in repeatability and exchangeability Application: 1.FTTH , CATV, LAN, MAN, WAN, Test &Measuremen 2.Video transmission , Data transmission 3.Active Device Termination 4.Premise Installations 5.Telecommunication and Data processing Networks 6.Industrial, medical & military 7.Systems Integration for Long Haul, Metro and Access Network Mechanical Drawings: High dense connection, easy for operation SC APC Fiber Optic Patch Cord for FTTX + LAN 0 Specification: Parameter Un , it FC, SC, LC ST, MU MT-RJ, MPO E2000 SM MM SM , MM SM MM SM PC , UPC APC PC PC UPC< , br> PC PC UPC PC PC , APC Insertion loss(typical) dB ≤0.3 ≤0. , 2 ≤0.3 ≤0.2 ≤0.3 ≤0.2 ≤0.2 ≤0.3 ≤0.2< , br> ≤0.2 ≤0.3 ≤0.3 R , eturn loss dB ≥45 ≥50

LC Sc 3.0mm Duplex Fiber Cable Sm Simplex 9/125 Fiber Optic Patch Cord The fiber optic patchcord is a length of fiber optic cable terminated at both ends with connectors that allow it to be rapidly and conveniently connected to telecommunication equipment. Whether they are called a patch cord, patch cable or fiber optic jumper. Description: Connector:SC,FC,ST,LC,MU,M , TRJ,E2000, etc Polishing type:PC,UPC,APC Fiber Type:Singlemode(G652D,G657A),Multimode(OM1,OM2,OM3 , ,OM4) Fiber cable:Simplex,Duplex,Multi-core,Ribbon,Distributio , n, Armoured, etc Cable OD:0.9mm,2.0mm,3.0mm,etc Cable Material:PVC-OFNR,PVC-OFNP,LSZH, etc Patchcord Length:1m,2m,etc Optical Specifications: Parameter Singlemode Patchcord Multimode Patchcord Polishing Type PC UPC APC PC Insertion loss(dB) <=0.3dB,MTRJ<=0.5dB <=0.3dB <=0.3dB <=0.3dB,MTRJ<=0.5dB Return loss(dB) >=45dB,MTRJ>=35dB >=55dB >=65dB Operating temperature -20ºC~75ºC Storage Temperature -40ºC~75ºC 100 mating cycles loss I.L changed≤0.1dB Durability >1000 cycles LC Sc 3.0mm Duplex Fiber Cable Sm Simplex 9/125 Fiber Optic Patch Cord 0 LC Sc 3.0mm Duplex Fiber Cable Sm Simplex 9/125 Fiber Optic Patch Cord 1

Product Description Dissymmetric Quad LC Fiber Optic Adapter Multimode With Flange Dissymmetric Aqua LC Quad Optical Fibre Adaptor with Flange Detailed Product Description: Product Name Aqua LC Quad Welded Fiber Optic Adapter Color Aqua Mode Type Singlemode, Multimode Insertion Loss ≤0.2dB Sleeve Pull Force 1-2.5N Durability ≤0. , 2dB( 500 Times) Operating Temp. -40℃～+80℃ Standards < , br>IEC61754-20-2012 / IEC61300 Environmental and Mechanism: Properties Test Condition Conformance Test Result Vibration 10-55Hz, 1.5mm, 60min IEC61300-2-1 ≤0.2dB M , ating Durability 500 Mating, clean every 25 mating. IEC61300-2-2 ≤0.2dB Impact 1.5m, 8 drops IEC61300-2-12 ≤0.2dB , Strength of Coupling Mechanism 40N, 10Min, L=22-28cm IEC61300-2-6 ≤0.2dB < , br>Temperature Cycling 40ºC to +85ºC, 40 cycles IEC61300-2-22 ≤0.2dB Temperature humidty cycling 40ºC, 95%RH, 96Hr IEC61300-2-21 ≤0.2dB O , perating Temperature -40ºC to +85ºC ≤0.2dB Storage Temperature -40ºC to +85ºC ≤0.2dB Features: > Low insertion loss and back reflection loss > Ferrule end surface pre-domed > Precision anti-rotation key and corrosion resistant body > UL-rated plastic housing > Telcordia style boots > Free-floating ceramic ferrule > Zirconia sleeves or Phosphor bronze sleeves > D-shaped easily installs into panel mount > RoHS compliant

Feature: Soft, flexible, easy to lay and splice, and with big capacity data transmission Good mechanical and environmental characteristics; Flame retardant characteristics; Cable jacket options:PVC,LSZH,PE

Minimum Order: 1 bags

This patch cord product is a mixed type having one side of the connector is SC and one side of the connector is FC. Cable outer diameter and boot size could be chose: 0.9 mm / 2.0 mm / 3.0 mm / other Cable jacket color is yellow as standard single mode patch cable. Fiber could be chose within single mode types: G652D / G655 / G657A1 / G657A2 Product Feature ◆ Easy Installation ◆ Mixed patch cable ◆ Excellent Mechanical Endurance ◆ Good in Repeatability ◆ 3D Interference Test More than 90% Passed Product Parameter Parameter Unit Data Operating Wavelength nm 1310 1550 Insertion Loss dB ≤ 0.3 Return Loss dB ≥ 50 3D Interference Test Passing Rate % 90 Repeatability dB ≤ 0.1 Plug and Pull Durability Times > 1000 Operating Temperature °C -10 ~ +75 Storage Temperature °C -40~+85 Application Telecommunication LA , N & WAN Broadband CATV Network FTTX

200G QSFP56 SR4 PAM4 Optical Transceiver Module (850nm MTP/MPO-12 OM3/OM4 100m with FEC DDM) This QSFP56-200G-SR4M supports 200GbE connectivity up to 100-meter transmission distance over multi-mode fiber (MMF) OM4 with four parallel lanes on 850nm center wavelength, operating at 50G per channel. It is compliant with the QSFP56 MSA and IEEE 802.3bs Specification. Product Details Fiber Mall P/N QSFP56-200G-SR4M Vendor Name Fiber Mall Form Factor QSFP56 Max Data Rate 212.5Gbps Wavelength 850nm Max Distance 70m on OM3/100m on OM4 Modulation Format PAM4 Host Required FEC Connector MTP/MPO-12 Voltage Supply 3.3V Cable Type MMF DDM Support Yes Transmitter Type 850nm VCSEL Receiver Type PIN TX Power -6.5~+4.0dBm Receiver Sensitivity < -8.4dBm Operation Temperature 0 to 70°C (32 to 158°F) Maximum Power < 5W Protocols QSFP56 MSA, IEEE 802.3bs Application 200G Ethernet, Data Center Interconnect Quality Assurance Excellent quality is the foundation of Fiber Mall's survival and development. Our operation team is an expert with many years of experience in the optical communication industry. Our manufacturers are first-class manufacturers in the industry. Many of them have the qualification of OEM for first-class system equipment manufacturers. Quality Certification We control the quality of our products, including our strict qualification of manufacturers, quality control process and production technology, and compliance with certification and safety standards. At present, our products meet the industry standards and mainstream quality certification, such as ISO 9001, CE, RoHS, FCC, etc.

Guanglian's 100G QSFP28 LR4 transceiver modules are designed for use in 100GBASE Ethernet and 4x28G OTN client interfaces throughput up to 10km over single mode fiber(SMF) with duplex LC connectors. Taking TOSA+ROSA+FPC+PCBA separate design, it has great reliability, airtightness and heat dissipation performance. The transceiver is compliant with IEEE 802.3ba 100GBASE-LR4, IEEE 802.3bm, SFF-8665 and SFF-8636 and the QSFP28 MSA standards. It is suitable to be used in various applications, such as 100G telecom connections, data center, high-performance computing networks, enterprise networks etc. Product Features BOX (TOSA+ROSA) packaging technology Support both 103.1Gbps and 112Gbps aggregate bit rate 4 x 28G DFB-based LAN-WDM DML transmitter 4 x 28G electrical interface Up to reach 10km on SMF 3.3V power supply voltage Power dissipation < 4W Operating Case Temperature: 0~70℃ Duplex LC connector Application 100GBASE-LR4 Ethernet links Telecom Network

Product Description MPO-MPO Trunk Cable with Pulling Eye, 24 Core MPO/MTP Cable, MPO/MTP Backbone Cable​ Application Pre-terminated Fiber Optic Cables provide fast deployment for horizontal and backbone fiber optic cables in equipment rooms of smart building cabling system as well as all data centers. Standardized components, de-engineered, ensure data center production in factories and realize the overall delivery to customers. Customers can quickly acquire products as needed and expand capacity according to businesses. Product Features Pre-terminated Fiber Optic Cables adopt high-grade low-loss MPO/MTP and LC connectors and have a 100% pass guarantee on the polishing process, exceeding all parameters specified in IEC 61754, IEC 61755 standards. OS2, OM3, OM4 and OM5 backbone cables can all be provided. The branch splitter has been patented to protect fiber fan-outs and delivers optimal tensile strength so that fiber counts are up to 192. Tailored services are provided, such as fiber length, branch types as well as various types of connector plugs, namely, MPO/MTP, LC, SC, E2000, and MU. Matched with Magic series patch panel and allied with pre-term cassettes, this product offers users the latest 10G-800G integrated solutions. Application Standards GB/T 18233 (ISO/IEC 11801); GB 50311; TIA/EIA568-C.2 Technical Details Specifications OM3/OM4 OM5 G.657.A2 PC G.657.A2 APC MPO Connector Connector Type, Grinding Type Low loss, PC 0˚ Low loss, PC 0˚ - Low loss, APC 8˚ Insertion Loss IL (Typical) ≤0.15dB ≤0.15dB - ≤0.18dB Insertion Loss IL (Max.) ≤0.30dB ≤0.30dB - ≤0.30dB Return Loss RL (Typical) ≥35dB ≥35dB - ≥70dB Return Loss RL (Min.) ≥30dB ≥30dB - ≥65dB Connectivity Method A, B, C A, B, C - A, B, C Color Code Aqua /Violet Lime green - Green

Japan Fujikura FSM-90S/90S+ world best splicer machine The faster automated features of the 90S fusion splicer reduce installation times. With this splicer, an operator can complete the entire splicing process from splicing to heating without touching the 90S and only moving the fiber. The fiber retention clamps support the automated operations. When the sheath clamps open automatically after splicing, the fiber retention clamps gently hold the spliced fiber to keep it from flying out. The retention clamps release when the fiber is lifted by the operator. Product details Fibre Count Single Cladding diameter 80 to 150m Coating diameter 100 to 1000m Applicable fibers SM MM DS NZ-DS EDF Fiber cleaved length 8-22mm (standard) Splicing mode Auto & Manual Average splice loss 0.02dB(SM) 0.01dB(MM) 0.04dB(DS) 0.04dB(NZDS) Return loss ≥ 60dB Environment conditions Environment conditions: -25~+50C (operation temperature), 0~95%RH (hu Protection sleeve length 20mm 40mm 60mm Product Keywords optical fiber fusion splicer machine priceShineway Tech fiber splicing machine Fujikura Fiber Optic Assembly FSM-90S 90S+ Splicer Machine 0

SHKE FTTX ODN Solution PON access system should be an all-optical solution in response to the continuously growing bandwidth requirements in the last-mile (access) domain. PON-based access network follows the trend of delivery of triple-play services to end subscribers, aggregating three types of services over a single delivery platform. This in turns is the next step in the evolution of the core networks to IP-based NGN. In order to build the new generation of optical access networks, this solution draws on the technologies of different maturity extents such as EPON, GPON, Ethernet and xDSL, ranging from local exchange devices of various capacities to serialized user-side devices. It can be deployed in various application scenarios, such as FTTC, FTTB, FTTO and FTTH, enabling operators to deliver services in a simple and straightforward manner, providing cost-effective high-bandwidth and multi-service support capabilities. This allows operators to become more competitive and adapt services to ever changing customer demands. Product Range: ● ODF Series ● Splice Cabinet Series ● Splitter Series ● Termination box Series ● Wall Mount Box Series ● Cables & Splice closure ● Connector Series FTTX Fiber ODN Solution High Bandwidth PON Access System 0 FTTX Fiber ODN Solution High Bandwidth PON Access System 1 SHKE Communication Tech Co., Ltd. (SHKE) is an industry leader in providing fiber optic products, engineering expertise and integrated services to the telecommunications industry since 2003. We manufacture, engineer and install the fiber optic products and equipment that communications providers need to provide high-speed voice, video and data services to their customers. Our extensive experience in both design and application crosses all markets, from Telco, Broadband and Wireless, to Electric Utility, OEM, Enterprise and Private Networks. The products we manufactured included: Fiber Optical Patch Cord, Optical Cable, Fiber Connector, Adapter, Attenuator and Plastic Optical Fiber (POF).The products we designed included: Fiber Optical Patch Panel, Optical Distribution Frame and Fiber enclosure. For the enclosure, it is compliant with IP68 test.We manufacture fiber optical patch cord,optical cable,fiber connector,adapter,attenuator and plastic optic fiber patch cord(POF).

Model:CLX-02E Place of Origin:ShenZhen,China Product description 1. Small size, use polishing machine on site 2. Compact and lightweight design 3. Very suitable for on-site use 4. Ability to polish PC and APC fiber connectors Specification Machine size 120mm*130mm*180mm Net weight 2.8kg Voltage DC 12V Electric Power 15w Polishing quantity 1-6 ports Work Temperature 8℃~45℃ Materials stainless steel Timer 1 timer(max 30Sec) Motor Speed 100RPM rotation,revolution 3.3rpm Grinding Sheet Size 68 mm Features 1. High performance for various applications 2. Work body, simple design, easy to use 3. Small size, high portability can be achieved in the laboratory or on-site 4. Perfect research or low volume transformation 5. Short cycle time-usually 2 minutes. For reengineering 6. Compatible with all major optical fiber connector styles Application 1. Applied in small batch production of optical fiber equipment polishing 2. Suitable for rework and research applications Handheld Mini 12V Fiber Optic Polishing Machine For Fiber Optic Connector 0 FAQ 1. Are you a factory or a trader? ......we are factory. 2. What is your MOQ? ......MOQ 1 piece. 3. Do you provide sample services? ......Yes, we will provide samples(Samples at prices announced by chuanglixun). 4. How will you ship to me? ....... We will spend 4 to 6 days via DHL or FedEx. Properly extended based on order quantity 5. How do we pay ......Book in advance or multiple payment methods such as T / T and T / L. 6. How long is your product warranty? ......The warranty period is 1 year (the warranty period will provide free repairs, except for consumables). After the warranty period, accessories will continue to be provided and will be charged at cost. 7. Do you provide customized services? ......Yes, we provide customized services, According to customer requirements and description