Consumer Electronics - Others

KD3005D is the adjustable DC power supply station, with dual 4 digit LED displays, 0-30V 0-5A continuously adjustable DC power supply for mobile phone repair. KORAD KA3005P 30V 5A adjustable DC power supply 4 digits LED screen display. KORAD KA3005P precisely generate the required voltages and currents, 0-30V adjustable DC output high-precision, 10mV and 1mA resolution. KD3005D Features: Compact Design with Dual 4 Digit LED Displays and Digital Controls. Circuit protection for over load protection, short circuit and over temperature. Automatic switching between mA and A display. KD3005D Specification: Weight: 4.8 kg Dimensions (W x H x D): 110 x 260 x 156 mm Supplied with: laboratory power supply unit, power cable, instructions Mains voltage: 110 or 230V AC, 50/60 Hz Output voltage: 0 - 30 V DC Output current: 0 - 5 A Load stabilization : Voltage: 0.01%+2 mV Current: <0.1%+10 mA Mains stabilization : Voltage: 0.01%+3 mV Current: <0.1%+3 mA Resolution setting: 10 mV/1 mA Accuracy (at 25°C +/- 5°C) : Voltage: 0.5%+20 mV Current: <0.5%+ 10 mA Residual ripple (20 Hz - 20 MHz) : Voltage: <2 mV rms Current: <3 mA rms Display resolution: 10 mV/1 mA Response time (10% load): <100 ms KORAD KA3005P Specification: Operating Conditions: Input voltage: 220V +/-10% Frequency range: 50- 60Hz Operating temperature: 32-104 ℉ (0-40 ºC) Operating humidity: < 80%RH Storage temperature: 32-158 ℉ (0-70 ºC) Storage humidity: < 70%RH Stable Voltage: Output Voltage Range: 0-30V Continuously adjustable Setup Resolution: 10 mV Setup Accuracy: <0.05% +20 mV Ripple: < 1mVRMS Read back Accuracy: 10 mV Temp. Coefficient: < 0.1% + 10mV Read back Temp. Coefficient: < 100 ppm+10 mV Stable Current: Output Current Range: 0-5A Continuously adjustable Setup Resolution: 1 mA Setup Accuracy: <0.1% +3 mA Ripple: < 3mARMS Read back Accuracy: 1 mA Temp. Coefficient: < 0.1% + 5mA Read back Temp. Coefficient: < 100 ppm+5 mA Dimensions: 4.3 x 6.1 x 10.25 inch (110 x 156 x 260mm)

Minimum Order: 1 bags

UNI-T UTP1306S adjustable DC power supply single AC 32V/6A 220V input DC power supply, UTP1306S single-channel linear DC power supply for phone repair, adjustable DC power supply switch 0~32V/0~6A AC 220V 50Hz, mini LED digit display DC power supply are single-channel linear DC power supplies with low ripple/noise, overload protection and constant voltage/current features. UNI-T UTP1306S 0-32V 0-6A Adjustable Linear DC Power Supply Single Channel DC Power Supply. Specification : Model: UTP1306S Rated output current: 0~6A Output Power: 192W Load regulation rate voltage: <0.3%+5mV Current: <0.2%+3mA Power regulation rate voltage: <0.3%+5mV Current: <0.2%+3mA Set resolution voltage: 10mV Current: 1mA Readback resolution voltage: 10mV Current: 1mA Setting Accuracy (25℃±5℃) Voltage: <0.5%+5mV Current: <0.2%+3mA Ripple and Noise (20Hz~20MHz) Voltage: ≤10mVrms Current: ≤2mArms Temperature Coefficient Voltage: ≤300ppm/℃ Current: ≤300ppm/℃ Display Type: LED digital tube display Voltage: AC 220V (can shift) ±10% Frequency: 50Hz/60Hz Package includes : 1pcs x UTP1306S DC Power Supply

Minimum Order: 1 bags

ATTEN APS15-3A single-channel linear stabilized dc power supply Voltage: 110 / 220 V 5V - 0-5.2V (0-0.5A) 15V - 0-16V (0-3.0A) Rated output current: 0.5/3.0A USB: 5V / 2.1A Output Power: 56W

Minimum Order: 1 bags

JDI 3006 high-precision voltage regulated Lab power supply for mobile phones repair, 30V 6A power supply current regulator for cell phone motherboard repair, JDI 3006 USB QC charger 3.0 output power supply. DC Power Supply Advantage : Have complete operating protection function. Highly efficient, low ripple, small volume, light weight. Double display voltage, current, and high precision. Voltage stabilization, current limiting, simple operation. Dual voltage input and convenient choice. Temperature control fan heat dissipation, low noise. Double potentiometer more precise adjustment. Application Areas : Car DVD, Car Audio. Aging products, such as resistors, capacitors, relays, DC motors, LED and the like. Laboratory, factory, repair power supply. Other DC power supply all the needs of the occasion. Arbitrary transformation current ammeter: 1.2A/3A/6A Dual output voltage, current and power full display: Output 1: 0~30V / 0~6A; Output 2: USB QC charger 3.0 Package List : 1 x Power Supply 1 x Power Cable 1 x Instruction Book

Minimum Order: 1 bags

PHONEFIX FX-818 8 in 1 regulated Smart DC Power Supply for cellphone and laptop motherboard repair, FX-818 Smart DC Power supply is the one of best repair tools for troubleshooting any cellphone and laptops, including: iPhone, laptop, Samsung, Huawei, Vivo, Xiaomi, laptops and others electronic products etc... PHONEFIX FX-818 professional Smart DC Power Supply for repair technicans Feature: 1: Regulated Power supply 2: Short circuit repair artifact, Shortkiller: detect short in seconds 3: Screen Light Measurement, BL(Backlight) detector: It can fastly detec any kinds of backlight problem,even schematics unavailable,it will help you fastly 4: Pulse voltage measurement, it can fastly detect speaker or ringer faults for any kind of cellphone. 5: RF signal strength test, 4G/5G:It can fastly detect PA fault for 4G/5G cellphones, CHG(Charger) detector: it can fastly detect charging fault with opening housing. 6: Charging current measurement, High precision current meter (Both digital and analog meters): detect pm (power ic),cpu,ram,nand and many other faults in seconds, it is really amazing and incredible. 7: iPower, DC power supply output 8: Free Online WUXINJI Vip Card for 30 days Control panel: To view all functions on the control panel Two analog current meters 1)One is MA meter:to show small current 2)Another oen is Ameter:to show big current 3)The two meters work at the same time

Minimum Order: 1 bags

Wanptek Adjustable DC power supply 30V 10A LED Digital Lab Bench Power Source Stabilized Power Supply Voltage Regulator Switch This model is a miniature switching DC power supply. The output voltage and current can be controlled and adjusted by variable resistors respectively, so it provides more convenience and accuracy in the adjustment of voltage and current. The panel also provides high-precision two/three-window digital tube display of voltage, current and power, so that users can intuitively see the current use status and various parameters of the machine 1.Small size, light weight and high power density. 2.Constant pressure and constant current switch automatically. 3.LED display of voltage, current and power, high precision and features of voltage stabilization, current limiting, and simple operation. 4.Adjustable Output Voltage & Current: output voltage and output current can be continuously 5.adjusted between 0 and nominal value with fine regulating and coarse regulating 6.it has over voltage protection(OVP), over current protection(OCP), over temperature protection 7.Temperature controlled fan cooling, low noise, long life. 8.Dual voltage input and convenient choice. 9.Output Voltage ranges from 0 to rating voltage with continuous adjustment . 10.Output current ranges from 0 to rating current with continuous adjustment 11.AC 110v and 220v can work, rest assured to choose. Features: 1. Production line test. 2. Mobile phonemaintenance, computermaintenance, electrical appliance maintenance,Car DVD, car audio. 3. Product aging, electroplating,such as resistors, capacitors, relays, DC motors, LEDs, etc. 4. Charge the battery. 5. Laboratory, scientific research teaching,factory, maintenance power supply.school laboratories scientific research and production line use 6. All other occasions requiring DC power supply. Packages: 1x DC power supply 1x power cord (EU,US,UK,AU) 1x Test line 1x Instructions Q: Is it suitable for repairing mobile phones and laptops? A: Yes. Q: Does this power supply charge the battery of a 25v car? A: You can charge a 25V battery, because the maximum voltage of the power supply can reach 30V (note！！the power supply Set up voltage must be greater than the battery voltage before it can charge it, otherwise it will kick back the power supply and damage the power supply!) Q: Can it be used for electroplating? A: It can be electroplated. Q: When does the fan rotate? A: When the internal temperature of the power supply is greater than 50℃, it will start automatically. Q: When this power is turned off and on again, does it remember the last setting? A: It is controlled by the adjustment knob, and as long as you don't move the adjustment knob, it will power on at the previous setting.

Minimum Order: 1 bags

Laboratory DC Power Supply Adjustable Voltage Regulator Stabilizer Switching Variable Bench Source 30V 10A AC 110V 220V wanptek There are included 5 packages: 1.KPS3010D DC power supply with power display 30V 10A(Three-digit display 0.1 V/0.01 A) 2.KPS3010DF DC power supply with power display 30V10A(Four-digit display 0.01 V/0.001 A) 3.KPS605D DC power supply with power display 60V 5A(Three-digit display 0.1 V/0.01 A) 4.KPS605DF DC power supply with power display 60V 5A(Four-digit display 0.01 V/0.001 A) 5.KPS1203D DC power supply with power display 120V 3A(Three-digit display 0.1 V/0.01 A) Specifications: KPS series DC power supply is a single output, high-precision dual display switching DC power supply. The machine has complete operation protection function, high efficiency, low ripple, high stability and small volume. Current limiting protection protects the KPS power supply and load from accidental damage. KPS series power supply has temperature control circuit and low intelligent heat dissipation noise. The series of switching power supplies for measuring instrument have ruled out the inconvenience of bigvolume and heavyweight of a traditional power supply possess. Four adjustment buttons,The output voltage and current respectively is controlled by two variable resistors with coarse and fine regulation for morehandy and precise adjustment. 1.High efficiency and sufficient power 2.Low ripple, small size and light weight 3.Double LED display of voltage and current, high precision 4.Stable voltage, limited current and simple operation 5.Double voltage input, convenient selection 6.Temperature controlled fan for heat dissipation, low noise and long service life 7.Output Voltage ranges from 0 to rating voltage with continuous adjustment . 8.Output current ranges from 0 to rating current with continuous adjustment 9.Short circuit protection function, short circuit stop output,overload protection,over temperature protection. 10.AC 110v and 220vcan work, rest assured to choose. Input voltage: AC 230V / 115V± 10%; 50Hz / 60Hz. Output voltage stabilizing value:0-30/0-60V/0-120 continuously adjustable. (Optional) Output constant current value: 0-10A/0-5A/0-3A continuously adjustable. (Optional) Ripple voltage: VPP ≤ 1% Overall efficiency: ≥ 89%. Digital display: three LED digital tube double display. Display resolution:0.1V/0.01A/0.01V/0.001A.(Optional) < , br>Display accuracy: ± 1% + 2digits. Working temperature: (- 10 ～ 45) ℃. Storage temperature: (- 20 ～ 60) ℃. Relative humidity: 90% (40 ± 5 ℃). Features: 1. Production line test. 2. Mobile phonemaintenance, computer maintenance, electrical appliance maintenance,Car DVD, car audio. 3. Product aging, electroplating,such as resistors, capacitors, relays, DC motors, LEDs,iron etc. 4. Charge the battery for car. 5. Laboratory, scientific research teaching,factory, maintenance power supply.school laboratories scientific research and production line use 6.Home automation or Arduino projects using low voltage 7. All other occasions requiring DC power supply. Packages: 1x DC power supply 1x power cord (EU,US,UK,AU) 1x Test line (Gift） 1x Instructions

Minimum Order: 1 bags

KPS series DC power supply is a single output, high-precision dual display switching DC power supply. The machine has complete operation protection function, high efficiency, low ripple, high stability and small volume. Current limiting protection protects the KPS power supply and load from accidental damage. KPS series power supply has temperature control circuit and low intelligent heat dissipation noise. Small size, light weight and high power density. Constant pressure and constant current switch automatically. Three LED display of voltage, current and power, high precision Temperature controlled fan cooling, low noise, long life Features: 1. Production line test. 2. Electrical maintenance. 3. Product aging. 4. Battery charging. 4. Laboratory, scientific research and teaching. 6. Other occasions requiring DC regulated power supply. Packages: 1x DC power supply 1x power cord (EU,US,UK,AU) 3x Test line 1x Instructions

Minimum Order: 1 bags

KPS series DC power supply is a single output, high-precision dual display switching DC power supply. The machine has complete operation protection function, high efficiency, low ripple, high stability and small volume. Current limiting protection protects the KPS power supply and load from accidental damage. KPS series power supply has temperature control circuit and low intelligent heat dissipation noise. Small size, light weight and high power density. Constant pressure and constant current switch automatically. Three LED display of voltage, current and power, high precision Temperature controlled fan cooling, low noise, long life Features: 1. Production line test. 2. Mobile phone maintenance, computer maintenance, electrical appliance maintenance,Car DVD, car audio. 3. Product aging, electroplating,such as resistors, capacitors, relays, DC motors, LEDs, etc. 4. Charge the battery. 5. Laboratory, scientific research teaching,factory, maintenance power supply.school laboratories scientific research and production line use 6. All other occasions requiring DC power supply. Packages: 1x DC power supply 1x power cord (EU,US,UK,AU) 1x Test line 1x Instructions

Minimum Order: 1 bags

Handskit Electric Rechargeable Soldering Iron Wireless Soldering Pen Handskit 5V 8W Electric rechargeable soldering iron, mini portable wireless welding pen, USB rechargeable battery Mini Electric Soldering Irons pen tool

Minimum Order: 1 bags

QianLi Macaron 2nd Generation portable spot welding machine with iPhone 11-14 Pro Max battery welding fixture. QianLi Macaron portable battery spot welder for phone battery flex soldering transfer repair. It is a highly efficient and reliable tool for soldering intricate parts. Features: 6 Adjustable power levels for precise and efficient welding. Upgraded extended welding terminals: Brand new upgraded cable, pure copper tips, more convenient compared to the previous generation. Multi-functional: Newly added USB interface, so the device can also be used as a power bank. Temperature control protection for safety. Type-C interface for faster charging and efficiency. High-capacity lithium battery with high power output for longer working hours. Manual and automatic mode switch for added flexibility. Fixed plates added for iPhone 11-14 series models for compatibility and convenience.

Minimum Order: 1 bags

DH20Pro Spot Welder Handheld, Portable Mini Spot Welding Machine With Quick Release Pen Nickel Plate, 18650 Battery Spot Welder for Phone Repair Tool. 5000W Power Spot Welding Machine Spot welding thickness: 0.1-0.12-0.15-0.2mm Small volume,high power. The thickness of spot welding is the thickness of nickel plating, and the unit is mm The solder pins can be completely removed and replaced. Spot welding machine can be used for spot welding 18650 lithium battery connecting nickel strips, or iron or stainless steel sheets, copper and aluminum cannot be spot welded. Rechargeable spot welding machine, can weld thousands of welding spots after being fully charged. The current is adjustable, easy to use, and the solder joints are beautiful and firm Foot switch controls welding, spot welding is more arbitrary. Instructions: Turn on and adjust the corresponding position according to the thickness of the following nickel belt: (1). Adjust to 5 position when spot welding 0.1mm; (2). Adjust to 6 position when spot welding 0.15mm; (3). Adjust to 8 position when spot welding 0.2mm. If the current is ad used too high or too small, ;it will affect the spot welding effect When the top of the soldering pin becomes black,sand it with fine sandpaper. Press the nickel belt with two soldering pens and step on the foot switch. Wait for about 0.5 seconds for output spot welding, then release the foot switch. Do not use voltage below 7.3V,please charge in time.

Minimum Order: 1 bags

QianLi ToolPlus iP-01 iP-02 Middle layer frame BGA reballing stencil platform for iPhone X XS XS MAX 1 Pro MAX motherboard repair, ToolPlus iP-01 iP-02 iPhone middle layer planting tin soldering fixture, Qianli 3D BGA reballing metal stencil motherboard middle frame planting tin reballing platform for iPhone logic board repair net fixture Features : Durable, unique design Seiko, featured material Precise positioning Efficiency Improvement Strong magnetic attraction Stencils won't deform under high temperature High quality Phone Middle Frame Reballing Platform BGA Reballing Platform for Phone X/XS/XS MAX/11/11 Pro/11 Pro MAX. Make your repair work easier

Minimum Order: 1 bags

Qianli 4 IN 1 middle frame reballing platform for iPhone 13/13 Pro/13 Pro Max/13 mini. Qianli Magnetic middle frame reballing platform 4 in 1 for iPhone 13 series. Qianli iPhone 13 series 4 in 1 double-sided middle layer reballing stencil platform regular/simple version for iPhone 13 motherboard soldering repair. Qianli 4 in 1 motherboard tin planting platform for iPhone 13-13 Pro Max. Features: Multiple Models: Suitable for iPhone 13/13Pro /13Pro Max /13Mini, innovative single-sided. 4 models universal to meet your maintenance needs. Silicone non-slip foot pads, specific weighted iron plate at the bottom Silicone anti-slip foot pads are used at the bottom to effectively isolate the temperature, anti-skid and anti-scald, so that the tin planting position is more stable. Stencils with no bulge under high temperature: 4 in 1 Middle frame reballing platform Precise positioning for the motherboard in high precision, strong magnetic pressing with no bulge iPhone 13/13Pro /13Pro Max /13Mini. User's Guide Shows: Step 1: Install the motherboard. Put the lower layer of motherboard that needs reballing to the corresponding positioning pins. Place it in the synthetic stone base. Step 2: Install stencils Align the stencils of the corresponding model with the positioning pins and put it into the base. Step 3: Apply solder paste Apply the solder paste at the corresponding temperature to the reballing hole, make sure that each hole is covered with solder paste. Step 4: Heat evenly Combine the top cover of the product with the base and operate. Use the hot air gun to heat the corresponding reballing hole.

Minimum Order: 1 bags