Electronics & Electrical

The micro switch 15A 125/250V is available from us and our switch has UL, cUL, ENEC, and CQC certifications. Welcome to contact us to get the quote & free samples. MPN: G5T16-L1P200 Rating: 16A 1/2HP 125/250VAC Circuit Code: SPST Normally Open Operation Force: 200gf Operation Position: 14.7±0.5mm Pre Travel: 1.6mm Max Lever Type: Without Lever Certification: UL, cUL, ENEC, CQC Sample & Datasheet & Quotation: Available

Minimum Order: 100

Electronic Air Pressure Sensor Features There are mechanical and electrical types on the market for air pressure switches and sensors. Generally, we call the electrical type an air pressure sensor and the mechanical type an air pressure switch. The difference is the trigger mechanism; the magnetic core drives the electrical air pressure sensor, but the mechanical air pressure switch is driven by the mechanical structure ( like the spring, leaf, etc.). So, the working principle decides the different performance for them. The electrical type will have a longer operating life as the failure rate is much lower than the mechanical type. Meanwhile, the air pressure sensor can also detect many air pressure points simultaneously, but the mechanical type can not. However, the mechanical type will have a lower price and can also be used in many kinds of applications if you don’t have a high requirement. Besides, the mechanical type also has not had many technical requirements for the customer when they use the switch in their product. All in all, you can choose the sensor or switch type as you need; if you don’t know how to choose the model, welcome to contact us for more details. C7 Electronic Air Pressure Sensor Specification Model Number C7 with wire & connector Working Medium Air or Gas tail gas Withstand Pressure 2000Pa Max. (Pa to Psi) Sensor Accuracy ±2%(Hz) Dielectric Strength 500VAC (<3mA) Rated Voltage DC4.75V – DC5.25V Rated Current 5mA Low-Duty-Cycle 50% Working Temperature 40T90 (-40 to 90℃)

Minimum Order: 10 long tons

S11 Steam Condensate Separator Features You can see the Steam Condensate Separator in the middle of the pressure switch and hoses, when the tail gas comes out and meet the cold air, the tail gas will become water drop inside the hoses to plug up the tube or even drop out the pressure switch and fan, which will lead to system failure and alarm. With this separator, it can avoid this situation happen. Generally, this can be used in the wall-hanging furnace boiler because the wall-hanging boiler meets this situation often but the water heater is not often. Because the furnace environment will lead to a drop of water, which will come back to the pressure switch or draught fan. So, this situation will cause the malfunction of the furnace. Meanwhile, this steam condensate separator can drain away water automatically so you don’t need to operate it by hand. The inside of the separator has a float ball, when the water is filled with the water, the ball will be raised up, and then the condensate water will be drained. About the connection with the pressure switch. For more parts of the air pressure switch and flow sensor, please click the link to check. Besides, we also provide the air pressure switch, water pressure switch, flow sensor, etc. which is also can be used in the wall-hanging boiler. We can provide the ONE-STOP solution for you. Condensate Separator Dimension This is the condensate separator dimension, the distance between interfaces is 13.9mm but 17.85mm is also available. Condensate Separator dimension Steam Condensate Separator Specification Model Number S11 Steam Condensate Separator Working Pressure Range 0 to 500 Pa Pressure Loss <5Pa @500Pa Medium Temperature 0℃ to 85℃ Size 13.9 mm (17.85mm is also available)

Minimum Order: 10 long tons

Water Heater Safety Valve Features The VA-F002 is a spring loaded water heater safety valve, it is not only can be used in the water heater but also can be used in boilers and furnaces. This model has 1*direct and 1*G1/4 thread pressure relief ports, for more details you can see the pictures or contact us. Meanwhile, it can cover the water temperature from 0 to 85℃ and the environment temperature from -40 to 110 ℃. High-quality material with Max. 8Bar pressure capability. When the heater heats the water, the device will generate pressure that will increase the risk of the parts damage. So, we need the safety valve to release the pressure to protect the devices. Our water heater safety valve relief pressure range is the same as the standard on the market, which is 3 Bar. So, it can be the universal valve to sell on the market only if the connector is suitable. This model connector is 1*direct and 1*G1/4 thread pressure relief ports, if you need to see more pressure relief valve types, welcome to contact us or visit the product page. Meanwhile, the VA valve series use the PA66 with 30% glass fiber, which has a very good performance for working. This kind of material design of compressive strength can reach 8 bar. Water Heater Safety Valve Specification Model Number VA-F1002 water heater safety valve Water Outlet Type 1* Direct inset & 1*G1/4 Pressure Relief Range 2.7-3.3 Bar Withstand voltage 10 MPa (10 Bar) Water Temperature 0℃ to 85℃ Operating Temperature -40 to 110℃ Manual pressure relief time 20000 cycles Shell Material PA66+30% Diaphragm Silicon Working medium Water

Minimum Order: 10 long tons

The F11 water flow sensor working principle is according to the Karman vortex which is installed in the eddy current plate in the slow flow area, which has 2*G1/2 connectors and its cable length and type can be customed. Generally, its rotation speed is proportional to the flow rate. That is when the magnetic core rotates the hall effect sensor will detect its speed so that the flow sensor can output the SWFM value. It can be used in gas boilers, water heaters, water dispensers, etc. F11 Flow Sensor Features It has a competitive price with high precision performance so it will be a perfect product be the alternative sensor for any brand. Meanwhile, this water flow sensor also has good electromagnetic compatibility & wide range of working temperatures. So, this lets it has a wide application range in different kinds of devices. The F1 series also has a very low-pressure loss when used and its testing components won’t be blocked by the particulate matter easily. So that it can reduce the maintenance cost and increase service life. For more flow sensor types, please click the link to check. Meanwhile, REGAL is a pressure & flowing industry expert, welcome to visit our homepage for more information. C2-C Level Sensor Specification Model Number F11 Water flow sensor Terminal Type 3-pin standard connector & wire (customizable) Interface type 2*G1/2 Operating flow interval 1 L/Min to 30 L/Min Dielectric Strength 500VAC(<3mA) Operating Voltage DC 4.75V to DC 5.25V Operating Current 15mA Low Output Duty Cycle 50% Overload Pressure 12Bar (@40℃) Working Temperature -15 to 85℃ Service life with loading 200000 cycles Protection Level IP20

Minimum Order: 10 long tons

Water Level Pressure Switch Features Using the high-quality silicon diaphragm, which can work in more than 150℃ for a long time. The B1 water level pressure switch has a wide range of use in hybrid or electronic control, such as the front-loading washing machine, dishwasher, etc. Which can control the single water level in the device. But if you need double water levels or multi-water levels control, welcome to contact us. Meanwhile, the Priming level, Reset level, and Overflowing level can be custom- made, which is dependent on your requirement. Besides, our level switch is a high degree of accuracy, which is +/-5mmw.c for the priming level. So you can use it on a demanding device. For more product information, welcome to click the link to see our product page. Meanwhile, REGAL is a pressure & flowing industry expert, welcome to visit our homepage for more information. B11 Level Switch Specification Model Number B11 Water Level Pressure Switch Circuit SPST-NO, SPDT Electrical Rating 1-2(3):10(2.5) @ 125/250 VAC; 1-6: 1(1) @ 125/250 VAC Or 0.1A @24VDC Gold plated contact Terminals 6.3*0.8 mm (#250)/ 4.8*0.5mm(#187) Priming Level Rang: 50~400mmw.c., Tolerance: +/-5mmw.c. Reset Water Level Rang: 20~350mmw.c., Tolerance: +/-5mmw.c. Overflowing Level Rang: 150~600mmw.c., Tolerance: +/-15mmw.c. Overload Pressure 760mmw.c. (7.6 kPa) Operating Temperature 85℃ max. Interface size 5.5mm outer diameter, suitable for 5mm inner diameter hose Working medium Air or non-corrosive gas Shell Material PA+GF with UL94-V0 Mechanical Cycles 100,000 cycles Electrical Cycles Main circuit: 250,00 cycles; Over-flow circuit: 5000 cycles Safety Certification CE (EN61058)

Minimum Order: 10 long tons

Coffee machine water pressure switch function The water pressure switch function in a coffee machine is usually used to control the volume of water and the pressure at which it flows, to ensure the quality and taste of the coffee. The water pressure switch works by detecting the flow and pressure of the water in the coffee machine, to regulate the concentration and taste of the coffee. This switch can adjust the flow and pressure of water to adapt to different types of coffee beans and to meet different taste demands, while also ensuring the efficiency and stability of coffee production. Coffee machine water pressure switching principle The principle behind the water pressure switch in a coffee machine is to use water pressure as an indicator of the flow rate and volume of water the machine is producing. It works by using a diaphragm or spring-loaded piston inside the switch that senses the water pressure inside the machine. When the water pressure reaches a certain predetermined level, the switch triggers a signal that turns off or regulates the flow of water to the coffee maker. This helps to prevent overpressure and ensure that the coffee machine is producing consistent and high-quality coffee with the correct water pressure and flow rate. Video Player 00:00 00:00 W32 Water Pressure Switch Specification Model Number W32 Water Pressure Control Switch Connector 6.3*0.8mm diameter Working Medium Water or other liquid Circuit SPST-NO Rating 0.05A (1A)@ 20VDC (250VAC) Rated pressure 1.2 Mpa (12kgf/cm2) Working Temperature 40T110 (-40 to 110℃) Mechanical Life 20E4 (200000 cycles Min.) Electrical Life 10E4 (100000 cycles Min.) Protection Level IP54 Standard Error ±0.001 MPa

Minimum Order: 10 long tons

Negative Air Pressure Sensor C7 negative air pressure sensor can simultaneously measure many water board levels and any position in a specific pressure range. It can contact a digital monitor to show the pressure value, and the signal output is done through the L/C oscillation principle to convert it into a square wave signal. The pressure sensor is the perfect updated vision of the pressure switch, which has a longer service life and more water level detection. So, the negative air pressure sensor will be used for the gas water heater and boiler and the large ventilation heating air control system. Generally, the detect pressure range is from 20 Pa to 80 Pa, which is the low-pressure type but as a pressure sensor company; we accept the OEM service. Welcome to discuss the customized project with us. Meanwhile, whether the pressure sensor or the pressure switch also has a negative and positive type, please send an inquiry to us to know more. All in all, Regal pressure and sensor products are high quality and reliable with fast delivery time. Differential Negative Air Pressure Sensor Specification Model Number C7 Working Medium Air or Gas tail gas Withstand Pressure 2000Pa Max. (Pa to Psi) Sensor Accuracy ±2%(Hz) Dielectric Strength 500VAC (<3mA) Rated Voltage DC4.75V – DC5.25V Rated Current 5mA Low-Duty-Cycle 50% Working Temperature 40T90 (-40 to 90℃)

Minimum Order: 10 long tons

C5 Air Pressure Switch Boiler Sensor Function The gas water heater’s air pressure switch (which is actually the air pressure sensor), usually located in the upper right corner of the water heater, is a disc-shaped object about the size of a teacup lid, connected by three wires, and a hollow plastic tube. The air pressure sensor works roughly like this The water-gas linkage device of the gas water heater is started by the water flow after the hot water bridle is opened. The physical displacement drives the micro switch, opens the solenoid valve to supply gas, and triggers the ignition circuit. At the same time, the micro switch also starts the strong exhaust fan, which starts the forced exhaust system, the strong exhaust fan has a bypass, through a small plastic pipe, to provide air pressure to the wind pressure sensor, the wind pressure sensor built-in film, one side is subject to wind pressure (air pressure), the sensor signal is continuously and stably provided to the ignition control loop, once the sensor signal is interrupted, The machine logic automatically cuts off the ignition circuit and closes the air valve. Eventually, it will cause the water heater to passively stop working. Air Pressure Switch Boiler Sensor 5mA 5VDC (1116) Please the link to learn about other sensor-related products Main parameters of the Air Pressure Switch Boiler (1) Linearity: Air Pressure Switch Boiler refers to the degree to which the actual relation curve between sensor output and input deviates from the fitting line. Defined as the ratio of the maximum deviation between the actual characteristic curve and the fitted line in the full-scale range to the output value of the full scale. (2) Sensitivity: Sensitivity is an important indicator of the static characteristics of the sensor. It is defined as the ratio of an increment in an output quantity to the corresponding increment in an input quantity that causes the increment. The sensitivity is indicated by S. (3) Hysteresis: When the input quantity of the sensor changes from small to large (positive stroke) and the input quantity changes from large to small (reverse stroke), the input-output characteristic curve does not coincide, which becomes hysteresis. For the same size of the input signal, the positive and negative stroke of the sensor output signal size is not equal, this difference is called the hysteresis value. (4) Repeatability: Repeatability refers to the degree of inconsistency of the characteristic curve obtained when the input of the sensor changes continuously in the full range in the same direction. (5) Drift: the drift of the sensor refers to the output of the sensor changes with time when the input is unchanged, and the second phenomenon is called drift. There are two reasons for the drift: one is the structural parameters of the sensor itself; Second, the surrounding environment (such as temperature, humidity, etc.). C5 Air Pressure Switch Boiler Specification Model Number C5 without wire & connector Working Medium Air or Gas tail gas Withstand Pressure 2000Pa Max. (Pa to Psi) Sensor Accuracy ±2%(Hz) Dielectric Strength 500VAC (<3mA) Rated Voltage DC4.75V – DC5.25V Rated Current 5mA Low-Duty-Cycle 50% Working Temperature 40T90 (-40 to 90℃)

Minimum Order: 10 long tons

550W Portable Power Station, 577Wh Solar Generator, Backup Lithium Battery Power Bank with LED light, Pure Sine Wave AC Outlet PD 60W 1. Features: If you’re heading out and need lots of wall plugs (110v) then this is the power station for you. On the back it’s loaded with 220v/110v outlets and 500 watts of power. You can literally power most any household appliance(s) for hours with it. Not only that, it charges to 100% in about 7 hours With a large color digital display you can see all the stats to know its condition. The massive capacity 577Wh battery will keep the lights on all night if need be. Providing pure sine wave power, it’s ideal for electronics like your laptop or TV. Of course, there are also several USB A, C and fast charging ports and a 12v car port. Best for those who need serious power and need a lot of wall adapter plugs. You can also buy it with their solar panels for a complete solution. 550W 220V/110V AC / 12V10ADC power supply, meet various electricity demands, various outputs ac/dc/usb, meet different devices, USP Power High Power Outdoor Power Station 110V Outdoor Portable Power Station 2. Specification: Model EA-500F Charging temperature 0~40℃(32~104℉) Rated power 500W Peak:550W Discharge temperature -10~60℃(14~140℉) Battery Capacity 577Wh Storage temperature -20~45℃(-4~113℉) Fully Charging Time About 7 hours Dimension 240*230*160mm Input Charging Adapter DC:19V/5A 95W Weight 5.5Kg Solar Input Anderson 120W MAX (18-24V) Accessories Charging cable Life cycles >1500 times Car charging cable LED light 3W Solar charging cable Cell type lithium iron phosphate battery AC Output 220V/50Hz, 110V/60Hz DC Output 2* DC:12V/10A(MAX) Car charging output 12V/10A MAX Double USB Output 1* 5V/3A , 1* Support QC3.0 fast charging Type-C Output 20V/3A PD60W Support PD fast charging protocol Certifications CE, FCC, ROHS, PSE, UN38.3, MSDS Security Protection Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Discharge Protection. 3. Picture: High Power 550W Portable Power Station for Outdoor Use 0High Power 550W Portable Power Station for Outdoor Use 1High Power 550W Portable Power Station for Outdoor Use 2High Power 550W Portable Power Station for Outdoor Use 3 4. Applications Portable Power Station,300Wh/292000mAhSolar Generator,Lifepo4 Battery Power Supply 300W Peak 500W with USB-C ,PD60W 4 5 .FAQ 1 . Q: Can I get a sample? Is sample free of charge? A: Sample order for testing before bulk order is welcomed. We will charge sample and send by freight collect. 2 . Q: Is it possible to make our logo (branding) on this product? A: Absolutely. We warmly welcome OEM/ODM orders. 3 . Q: How long is the delivery time of your Power Station products? A: It usually takes around 7-10 working days to work out a sample for customer. The delivery time of bulk order is usually about 45 days. 4 . Q: How to guarantee the quality of your products? A:1) Strict detection during production. 2) Strict sampling inspection on products before shipment and intact product packaging ensured. 3) We offer 1 year warranty. 5 . Q:How do you ship the goods since they are high capacity battery? A:We have long-term cooperated forwarders who are professional at battery shipment.

60V 30A CAN RS485 Bluetooth Lithium Ion Battery Charger Product Description: 60V 30A fully automatic battery charger, designed for high-power machinery. It offers advanced features such as a pre-charge mode, trickle mode, and battery protection. This charger is customizable with different parameters and can be equipped with optional communication functions like CAN, RS485, and Bluetooth to meet your specific needs. The pre-charge mode prepares the battery for charging, ensuring a smooth transition. The trickle mode provides a low, constant current to prevent overcharging and maintain optimal battery condition. With its customizable parameters, the charger can be tailored to suit various battery types and machinery, optimizing charging performance. Additionally, the optional communication functions allow for remote monitoring, control, and data exchange during charging. This 60V 30A charger is the ideal solution for high-power applications, offering efficient charging, battery protection, and customization options to meet your requirements. Type Specification DC Voltage(Max) (CC:A) Charging current Light Turning(A) Li-ion Lifepo4 Lead acid Lithium Lead acid UY2500 12V 100A 12.6V/16.8V 14.6V 14.7V 100A 8%CC 25%CC 24V 65A 25.2V/29.4V/33.6V 29.2V 29.4V 65A 36V 45A 42V/46.2V 43.8V 44.1V 45A 48V 38A 50.4V/54.6V/58.8V 54.75V/58.4V 58.8V 38A 60V 30A 63V/67.2V/71.4V 73V 73.5V 30A 72V 23A 79.8V/84V 87.6V 88.2V 23A 84V 20A 88.2V 102.2V 107.8V 20A 96V 18A 100.8V 109.5V 117.6V 18A 108V 16A 113.4V 120.45V 132.3V 16A 120V 15A 126V 131.4V 147V 15A Product Features : 1.Self-Balancing Adjustment Capability: Experience optimal charging performance with our charger's unique self-balancing adjustment ability. 2.Charging from 0 Voltage: Unlike others, our charger can initiate charging from 0 voltage, ensuring no power is wasted. 3.MCU Technology and Customization: Equipped with MCU, our charger offers enhanced protection functions and performance. Customize charging curves to match your specific requirements. 4.Optional RS485/CAN/Bluetooth Communication: Seamlessly integrate our charger with compatible communication systems for real-time monitoring and control. 5.Protection: Output Over Voltage Protection, Output Over Current Protection, Short Circuit Protection, Reverse Polarity Protection, Over- Temperature protection. Upgrade to the charger for unparalleled performance and versatility in charging your devices.CAN RS485 30A 60V Lithium Ion Battery Charger Bluetooth High Power 0CAN RS485 30A 60V Lithium Ion Battery Charger Bluetooth High Power 1 CAN RS485 30A 60V Lithium Ion Battery Charger Bluetooth High Power 2CAN RS485 30A 60V Lithium Ion Battery Charger Bluetooth High Power 3CAN RS485 30A 60V Lithium Ion Battery Charger Bluetooth High Power 4 CAN RS485 30A 60V Lithium Ion Battery Charger Bluetooth High Power 5

Product Description Product Description: Silent Type Diesel Generator The silent type diesel generator is a reliable power choice for your business. Our silent type diesel generator sets offer superior performance and long-lasting operation from 10kW up to 1000kW. With an extensive range of open silent type diesel generator sets, you can get the one that best suits your needs. All our silent type diesel generator sets feature a 1-2 year warranty and are equipped with an automatic/manual control panel and a variety of protection systems, including voltage, frequency, temperature, oil pressure and overload protection. Our silent type diesel generator sets come with an electric/manual starting system for a smooth running. Invest in our silent type diesel generator sets and you will get a reliable and long- lasting power supply for your business. Features: Product Name: Silent Diesel Generator Warranty: 1-2 Years Voltage: 220V-440V Fuel Consumption: Low Operation Time: Long Cooling System: Air/Water Silent Type: Diesel Generator Set Technical Parameters: Feature Specification Operation Time Long Cooling System Air/Water Power 10kW - 1000kW Protection System Voltage/ Frequency/ Temperature/ Oil Pressure/ Overload Type Silent Diesel Generator/ Silent Type Diesel Generator Set/ Cummins Power Diesel Generator/ Diesel Generator Set Starting System Electric/ Manual Frequency 50Hz/ 60Hz Fuel Consumption Low Voltage 220V - 440V Warranty 1 - 2 Years Applications: The Minlong open silent type diesel generator is the perfect choice for many applications where a reliable and silent power supply is required. Our diesel generator meets the highest quality standards and is certified with ISO9001. It is designed to be highly efficient and long-lasting. Its minimum order quantity is only one piece, and we offer very competitive price for larger order. The packaging is done with wood cases and we guarantee 10-15 days delivery time. We accept various payment terms such as L/C, D/A, D/P, T/T, Western Union, MoneyGram. We have a supply ability of 1000 pieces per week and the operation time is long. We also offer 1-2 years warranty and our maintenance is very easy. The control panel is automatic/manual and it is powered by diesel. It is a Cummins power diesel generator and it is also called an open silent type diesel generator, diesel generator set, power generator, and generator set. Customization: Silent Diesel Generator Brand Name: Minlong Place of Origin: China Certification: ISO9001 Minimum Order Quantity: 1 Price: Negotiation Packaging Details: Wood case Delivery Time: 10-15 days Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram Supply Ability: 1000 pieces per week Protection System: Voltage/ Frequency/ Temperature/ Oil Pressure/ Overload Warranty: 1-2 Years Fuel Consumption: Low Operation Time: Long Frequency: 50Hz/60Hz Minlong Diesel Generator Set is specially designed for Cummins Power. It is of high quality, silent type and low fuel consumption. With advanced protection system, it can provide Voltage/ Frequency/ Temperature/ Oil Pressure/ Overload protection. It has long operation time and is super cost- efficient. The warranty period is 1-2 years. We offer the best price with minimum order quantity of 1. The packaging details are wood case and delivery time is 10-15 days. Payment terms include L/C, D/A, D/P, T/T, Western Union, MoneyGram. We can supply up to 1000 pieces per week. Support and Services: Technical Support and Service for Silent Diesel Generator The Silent Diesel Generator offers excellent technical support and service to its customers. We have a team of experienced professionals who can provide you with quality service and advice, and help you maintain your generator in optimal condition. Our team is available 24/7, so you can always count on us for any technical issues or concerns. Our technical support and service includes: On-site technical support and service Remote diagnostics and troubleshooting Repair and maintenance services Software updates and upgrades Periodic system maintenance Regular inspection and testing We also provide detailed maintenance and operation manuals to ensure that our customers can operate and maintain their Silent Diesel Generator with ease. Our manuals provide clear and concise instructions that are easy to understand and follow. We strive to provide superior customer service and technical support to all our customers. If you have any questions or concerns, please do not hesitate to contact us. We are always here to help. Packing and Shipping: Packaging and Shipping silent diesel generator The silent diesel generator is packaged in a strong cardboard box. The box is clearly labeled with the product name, model number, and weight. The generator is securely strapped inside the box to prevent movement during shipping. The generator is shipped with a freight forwarding company to ensure safe delivery. FAQ: Q: What is the brand name of the Silent Diesel Generator? A: The brand name of the Silent Diesel Generator is Minlong. Q: Where is the Silent Diesel Generator produced? A: The Silent Diesel Generator is produced in China. Q: What is the certification of the Silent Diesel Generator? A: The Silent Diesel Generator is certified with ISO9001. Q: How many pieces of Silent Diesel Generator can be supplied per week? A: Minlong is able to supply 1000 pieces of Silent Diesel Generator per week. Q: What are the payment terms for the Silent Diesel Generator? A: The payment terms for the Silent Diesel Generator include L/C, D/A, D/P, T/T, Western Union, and MoneyGram.

We provide SMT&PCB Assembly services for prototype to small and medium volume projects. The 30 SMT lines are equipped with high-end FUJI SMT machines, 10 temperature zones reflow ovens, AOI,SPI, X-RAY and BGA rework machines

Minimum Order: 100

ER-QA-03F (30 μg): 1. Bias repeatability: 150-220μg; 2. Scale factor repeatability: 150-220ppm; 3. Class II non-linearity repeatability: 40-50μg/g2. Introduction ER-QA-03F is a small size accelerometer which is mainly used for oil well logging. The output current is linear with the force. The operator can select a reasonable sampling resistor according to the calculation to achieve the highest precision output. The product can also be used for static testing and dynamic testing, which is a standard vibration sensor. At present, with the increasing demand for the miniaturization of quartz accelerometers in various fields, compared with the traditional Φ25.4 quartz accelerometer, Φ18.2 or even smaller products are becoming more and more popular, under the premise of the same level of accuracy, it is smaller in size and lighter in weight, while inheriting the advantages of the original manufacturing process, suitable for mass production, with higher cost performance. Features 1. Excellent start repeatability 2. Good environmental performance 3. Analog output 4. Adjustable output range 5. Small dimensions

Minimum Order: 1 bags