Electronics & Electrical

Name: PMK ethyl glycidate Synonyms: NEW PM , K POWDER; PMK CAS: 28578-16-7 EINECS: 23 , 4-232-0 MF: C13H14O5 MW: 250.25 Density , : 1.302±0.06 g/cm3(Predicted) Boling Point: 327.8±42.0 °C(Predicted) DMSO: 30 mg/ml Ethanol: 10 mg/ml PBS ,  (pH 7.2): 1 mg/ml Storage Condition: -20 , °C

Minimum Order: 1 bags

XLPE Insulated Power Cable Product Description Application : This product is suitable for transmission and distribution system at the voltage from LV to MV. The power cables can be flame retardant when used as type ZR. Installation Temperature : The installation temperature should be over 0C . If the ambient temperature is lower than 0C,the cable should be preheated. Operating Temperature : Max permissible continuous operating temperature of conductor shall not exceed 90C . Conductor Short-circuit Temperature : Max temperature at short-circuit shall not exceed 250C . The short-circuit duration shall not exceed 5 seconds. Bending Radius: 20( d+D) +/-5% for single core cable,15( d+D )+/-5% for multi- core cable. D=Actual outer diameter of cable (mm),d=Actual diameter of the conductor (mm) Standard: IEC60502, GB/T12706 or other standard required by customer. The requirements for flame retardant property is according to IEC60332-3 and GB18380. Packing: Steel/wooden reel, wooden reel or steel reel.

Aluminum Alloy Conductor Cable Product Description Since the early 1900s, aluminum and aluminum alloy conductor materials have been used by electrical utility companies for the transmission of electrical power within power grids across the country. In fact, over the years, aluminum has largely displaced copper conductors for these functions and has become the standard material for use in power transmission and distribution. If you’ve ever wondered why there’s no copper in the air, it’s because aluminum is the superior choice in every way. For starters, aluminum features twice the ampacity per pound as copper. In addition, it’s lighter, more flexible, and more corrosion-resistant. And MD Aluminum Alloy Conductor Cable much more cost- effective. As an example, if you’re an electron going all the way from say, for long distance power transmission, on the grid – you’re going to use the aluminum power highway. Thanks to a specially engineered aluminum alloy, Mingda feeder and service entrance cables now make it possible for commercial and residential users to enjoy the same reliability and economic advantages as power utilities. Aluminum Alloy Cable for Building 50% lighter than copper per pound 25% more flexible than copper easier and quicker to install similar conduit fill as copper for amps delivered

PVC Insulated Control Cable Product Description Control Cable is suitable for use in distribution equipment,instrumentation connection and control system at rated voltage 450/750V or less,The control cable can be made as flame retardant when customer required. Laying Temperature: during laying environment temperature shall not be less than 0℃,the cable should be preheated. Operating Temperature: max permissible continuous operating temperature of conductor shall not exceed 70℃. Bending Radius:16D for armored cable,8D for unarmored cable. D=actual outer diameter of cable ( mm ) Standard:GB9330-88 or other standards required by customers.The requirement for flame retardant property is according to IEC 60332-3,category B and C. Packing:Steel/wooden reel,wooden reel or steel reel. Description and Application Range of Cable Description Application Range Copper conductor/ PVC insulated/ PVC sheathed control cable For fixed laying indoors, in cable trench or conduit. Copper conductor/ PVC insulated/copper tape screened/ PVC sheathed control cable For fixed laying indoors,in cable trench or conduit when screen is required. Copper conductor/ PVC insulated/copper wire braiding screened/ PVC sheathed control cable Copper conductor/ PVC insulated/steel tape armored/ PVC sheathed control cable For fixed laying indoors,in cable trench, conduit or directly buried,the cable is able to bear larger mechanical force. Copper conductor/ PVC insulated/steel wire armored/ PVC sheathed control cable For fixed laying indoors,in cable trench, conduit or well.The cable is able to bear larger pulling force. Copper conductor/ PVC insulated/ PVC sheathed flexible control cable For fixed laying indoors when flexibility is required in moving. Copper conductor/ PVC insulated/copper wire braiding screened/ PVC sheathed control cable For fixed laying indoors when flexibility and screen are required in moving

BS Standard Cable Product Description Single core cables with solid or stranded copper conductors, PVC insulated, rated 450/750V conforming to SASO:55 specification Construction: Conductor Pla , in annealed circular copper conforming to IE , C:228, class 1 and 2 ( also available in aluminum conductors sizes 16 to 630 mm2). Insulation PVC type 5 to BS:6746  , rated 85°C, (PVC type 1 to BS:6746 rated  , 70 °C also available) Application: Typical applica , tions include building wiring, equipment wiri , ng, switching and distribution installations in conduits above or under plaster Features: Insulation adheres tig , htly to conductors yet strips easily, leaving conductor clean. PVC insulation has good electrical properties. Dimensions and Weights Conduct , or Insulation Packaging Cross sectional area Nominal Minimum number of wires Thickness Nominal Overall diameter Approx Net weight Approx B-Box, S-Spool C-Coil, D-Drum m m2   m m m m kg/km m 1.5 re 1 0.7 3.0 19 50/100 B/S 1.5 rm 7 0.7 3.2 19 50/100 B/S 2.5 re 1 0.8 3.6 30 50/100 B/S 2.5 rm 7 0.8 3.8 31 50/100 B/S 4 re 1 0.8 4.1 47 50/100 B/S 4 rm 7 0.8 4.3 48 50/100 B/S 6 re 1 0.8 4.6 66 50/100 B/S 6 rm 7 0.8 4.9 67 50/100 B/S 10 re 1 1.0 5.9 110 50/100 C 10 rm 7 1.0 6.3 113 50/100 C

8000 Series Aluminium Alloy Conductor SER Service Entrance Cable Product Description 8000 series aluminium alloy con , ductor is insulated with black XLPE. The insulated conductors  are cabled together with AL-alloy concentric neutral and fiberglass reinforced polyester tape binder, and oversheathed by grey sunlight resistant PVC. Construction: The stranded compacted 8000 series aluminium alloy conductor is insulated with black XLPE. The insulated conductors are cabled together with AL-alloy concentric neutral and fiberglass reinforced polyester tape binder, and oversheathed by grey sunlight resistant PVC. Application: Mainly used to convey power from the Service drop to the meter base to the distribution board. SEU can also be used in certain branch circuits as permitted by 1999 NEC. It is used in wet or dry locations. Rated Voltage：600V. Operating Temperature: Max permissible continuous operating temperature of conductor shall not exceed 90℃. Standard: UL 44 and UL 854,Federal Specification J-C-30B or other standards required by customers.

Dear sir/madam, This is peter from Luminatii Technology Co., Ltd in China. A company integrating R&D, manufacturing and sales of LED displays in one of the national high-tech enterprises. Our products are exported to 87 countries and regions, with a robust global sales and service network. Please feel free to contact me if you are intersted in us. whatsapp：+86 17360775285 WeChat：peterlin18588952897 ema , il：peter@luminatii.com web：https://luminati , i.com

Minimum Order: 1 bags

PRODUCT DESCRIPTION IP68 LED Underwater Spot Light 20W 40W 60W 80W DMX512 Pond Lamp Item No. Lighting Source Lens Beam Angle (°) Consumption(Watt) Input Voltage(V) SPD225201 20X1W 8°/12°/25°/ 30°/45°/ 60° 20.1 DC24V SPD225202 20X2W 8°/12°/25°/ 30°/45°/ 60° 40.2 DC24V SPD225206 20x3W RGB3in1 8°/12°/25°/ 30°/45°/ 60° 60 DC24V SPD225209 20x4W RGBW4in1 8°/12°/25°/ 30°/45°/ 60° 80 DC24V Material: stainless steel 316L Lens: Optical lens, efficiency ≥85% Glass: Tempered glass T=8mm Cable gland: IP-68 PG-11 copper and nickel coated Light Color: Single color/ RGB Working temperature: -20℃ to 40℃ PCB: Excellent heat conductivity Aluminum, coefficient of heat conductivity≥2.0w/mk Gasket: Molding shaped silicone seal Power cable: H05RN-F 2x0.75mm2 L=2m (for Single color) H05RN-F 4x0.75mm2 L=2m (for RGB) IP68 LED Underwater Spot Light 20W 40W 60W 80W DMX512 Pond Spot Lights 0 IP68 LED Underwater Spot Light 20W 40W 60W 80W DMX512 Pond Spot Lights 1 IP68 LED Underwater Spot Light 20W 40W 60W 80W DMX512 Pond Spot Lights 2 IP68 LED Underwater Spot Light 20W 40W 60W 80W DMX512 Pond Spot Lights 3 IP68 LED Underwater Spot Light 20W 40W 60W 80W DMX512 Pond Spot Lights 4 IP68 LED Underwater Spot Light 20W 40W 60W 80W DMX512 Pond Spot Lights 5

Model: BR-S20H Material: 0.30mm Phosphor Bronze,Nickel Plated Packaging: 500pcs/reel Mounting Type: Surface Mounting Type Application: CR2032,CR2025 Coin Cell Battery We specialize in the production of electronic Battery Holder ,Battery Snaps,Battery Retainer,Battery Contacts and Clips for more than 10years.Our products used for various kinds of button cells(AG3,AG10,AG13,CR1220,CR1632,CR2032,CR245 , 0,CR2477...) and cylindrical battery(Size N,AAA,AA,C,D).We could design the new mold according to customer's requiryment and produce specified models for customers.

Minimum Order: 10000

Model: BC-AA02 Material: 0.30mm Steel with Heat Treatment, Nickel Plated Packaging: 500pcs/bag Application: AA Battery

Minimum Order: 10000

Model: BS-2032-8C2.0 Material: Housing: PPA Contact: Phosphor Bronze (Surface Plating: Au) Packaging: 200pcs/box Mounting Type: Surface Mounting Type Application: CR2032 Lithium Coin Cell Battery We specialize in the production of electronic Battery Holder ,Battery Snaps,Battery Retainer,Battery Contacts and Clips for more than 10years.Our products used for various kinds of button cells(AG3,AG10,AG13,CR1220,CR1632,CR2032,CR245 , 0,CR2477...) and cylindrical battery(Size N,AAA,AA,C,D).We could design the new mold according to customer's requiryment and produce specified models for customers.

Minimum Order: 10000

Model: BC-ATRC001 Material: 0.30mm phosphor bronze with Nickel Plated Packaging: 1000pcs/bag Application: 23A Battery We specialize in the production of electronic Battery Holder ,Battery Snaps,Battery Retainer,Battery Contacts and Clips for more than 10years.Our products used for various kinds of button cells(AG3,AG10,AG13,CR1220,CR1632,CR2032,CR245 , 0,CR2477...) and cylindrical battery(Size N,AAA,AA,C,D).We could design the new mold according to customer's requiryment and produce specified models for customers.

Minimum Order: 10000

Model: BR-S20R/3002 Material: 0.30mm Phosphor Bronze,Nickel Plated Packaging: 500pcs/bag Mounting Type: Surface Mounting Type Application: CR2032,CR2025 Coin Cell Battery We specialize in the production of electronic Battery Holder ,Battery Snaps,Battery Retainer,Battery Contacts and Clips for more than 10years.Our products used for various kinds of button cells(AG3,AG10,AG13,CR1220,CR1632,CR2032,CR245 , 0,CR2477...) and cylindrical battery(Size N,AAA,AA,C,D).We could design the new mold according to customer's requiryment and produce specified models for customers.

Minimum Order: 10000

Model: JHFG084P Material: 0.20mm Phosphor Bronze,Nickel Plated Packaging: 1000pcs/bag Mounting Type: Surface Mounting Type/Through the Hole Type Application: CR2032,CR2025,CR2430 Lithium Coin Cell Battery We specialize in the production of electronic Battery Holder ,Battery Snaps,Battery Retainer,Battery Contacts and Clips for more than 10years.Our products used for various kinds of button cells(AG3,AG10,AG13,CR1220,CR1632,CR2032,CR245 , 0,CR2477...) and cylindrical battery(Size N,AAA,AA,C,D).We could design the new mold according to customer's requiryment and produce specified models for customers.

Minimum Order: 10000