Electronics & Electrical

Xiongcai Motor Controller Applying To Strker #6,#7,#8 Bone Drill Xiongcai Technology has been specializing in motor control since 2011, with a decade’s experience, our products are suitable for many medical equipment, especially applying to bone drills, draw saws. In earlier October, one customer from Brazil, found us from internet. He sent an email trying to inquire motor controller. He said he ran maintenance business on Stryker bone drills, especially the Stryker6/7/8. Actually we do have some types of electronic speed controller for bone drill application, providing equivalent performance. The customer said he bought some replacements before, but after he installed motor controller into bone drill, he found that some of the bone drill failed to work at its best and some of them does not work at all. We ask him to send us some pictures of components. After checking the PCB, we found that the triggers of bone drill and Hall sensors did not matched precisely. The distance of triggers are not the same with the distance between Hall sensors. In this case, the magnet installed on the triggers could not activate the Hall sensors, so the devices failed to work or failed to work at their best. We asked the customer to show us instruction, and check the installation dimensions. Then we recommended two types XCB302 and XC303 electronic speed controller, which met devices precisely. The customer said the previous supplier did not check the detail and just sold him products, and he wanted to bought several pieces each from us for test because he felt that we were responsible. Three weeks later, customer came back to us and told us the motor controller had been installed perfectly and worked at their best. Xiongcai Technology investment into research and development enable the company to be at the leading edge of technological development, delivering quality products to clients. Contact us and have a try http://en.xc-bldc.com or search Shenzhen Xiongcai Technology Co., Ltd, we will assist you with efficient motor control.

Minimum Order: 300

Xiongcai E3 electronic speed controller (ESC) with 400A, 12S, 54V Power System Make A Difference For R/C Model Car and Truck The Xiongcai E3 electronic speed controller (ESC, motor controller) is packed with a potent combination of hardware and software advancements, engineered for 1:8, 1:6 R/C car. Xiongcai tends to be at the leading edge of technological development of motor control, our team is trustable, so is the product.  Our motor controller for automotive electronics are applied by top brands in auto industry such as NISSAN, XPeng, FAW Group, FAWDE, Jingyi Group, Feilong Auto Parts, Shenhai Electrical Appliance, Huirun Electrical Machinery and more. You can experience the performance and handling of electronic speed controller on RC car. 12S, 400A continuous current, 54V, the power system will push your vehicles to their limit and beyond. MAYBE it’s the most powerful ever in motor control of R/C car and truck. The forged heatsink integrated fan provides excellent thermal performance, allowing airflow throughout the system, cooling critical components. Even Xiongcai E3 ESC is a power monster, it is still under control. For the safety, Xiongcai team designed excellent protection measures. 1. Low voltage and over voltage protection. The ESC will monitor batteries all the time, once the voltage is lower than preset value, the power will be reduced immediately and be cut off in a few seconds. 2. BEC voltage is optional 6v/7.4v/8.4v, up to your servo spec. The brake force and reverse force is programmable for enhancing drivability. 3. Thermal performance is meticulously designed. Fan is smart controlled. When the internal temperature exceeds 55 degree, the fan will be turned on by electronic speed controller, keeping your vehicle working at optimal condition; When the temperature is low than 50, the fan will be turned off. When there is an abnormal heavy current or short circuit occured, the test mode will be activated. If the supply is still abnormal after three-time test, electronic speed controller will cut off the supply to fan, and ESC can work normally. You can tune the parameters of ESC for different driving condition, from rugged terrains to pavement, off-road or on-road, Xiongcai E3 ESC will promote the performance to a new level, providing ultimate handling experience. Xiongcai Tech has been specializing the ESC design and manufacture for 15 years, and committed to promote drivability of R/C model cars. Xiongcai team is capable of excellent RD ability, if you have any special requirements on your motor control, we will help you achieve your ideals. Contact us and have a try. visite http://en.xc-bldc.com, we are ready to put your R/C cars and trucks in extreme.

Minimum Order: 300

Xiongcai E3 electronic speed controller (ESC) with 400A, 12S, 54V Power System For R/C Model Car and Truck Ultimate Handling Experience The Xiongcai E3 electronic speed control (ESC, motor controller) is packed with a potent combination of hardware and software advancements. This product is designed for high-level R/C car sport. 6-12S Lipo, 400A continuous current, 54V, suitable for sensored or sensorless brushless motor,  supporting  240,000 RPM motor. Smart controlled fan provides excellent thermal performance, it will be turned on or off according to internal temperature by motor controller (ESC). The parameters can be adjusted up to driver's handling level. The power system will push your vehicles to their limit and beyond. MAYBE it’s one of the most powerful electronic speed controller ever in field of R/C car and truck. Even Xiongcai E3 ESC is a power monster, it is still under control. For the safety, Xiongcai team designed excellent protection measures. 1. Low voltage and over voltage protection. The ESC will monitor batteries all the time, once the voltage is lower than preset value, the power will be reduced immediately and be cut off in a few seconds. 2. BEC voltage is optional 6v/7.4v/8.4v, up to your servo spec. 3. The brake force and reverse force is programmable for enhancing drivability. 4. Thermal performance is meticulously designed. With the integration of a forged Al heatsink, the design maximizes the airflow throughout the system and cool down critical components, keeping your vehicle working at optimal condition. You can tune the parameters of ESC for different driving condition, from rugged terrains to pavement, off-road or on-road, Xiongcai E3 ESC will promote the performance to a new level. Xiongcai Tech has been specializing the ESC design and manufacture for 15 years, and committed to promote drivability of R/C model cars. We are professional and trusted, our parts are imported by top brands in auto industry such as NISSAN, XPeng, FAW Group, FAWDE, Jingyi Group, Feilong Auto Parts, Shenhai Electrical Appliance, Huirun Electrical Machinery and more. Xiongcai team is capable of excellent RD ability, if you have any special requirements on your motor control, we will help you achieve your ideals. Contact us and have a try. visit http://en.xc-bldc.com or search Shenzhen Xiongcai Technology Co., Ltd, we are ready to put your R/C cars and trucks in extreme.

Minimum Order: 300

Motor Controller (Electronic Speed Control, ESC) With 400A Current, 12S, 54V Power System Engineered For 1:8 Scale R/C Car and Truck Fast Start, Turbo Acceleration Rate, Xiongcai E3 Motor Controller (ESC) Help You Win The Race At The Starting Line 400A continuous current, 54V, the power system will push your vehicles to their limit and beyond.  Even Xiongcai E3 ESC is a power monster, it is still under control. For the safety, Xiongcai team designed excellent protection measures. Low voltage and over voltage protection. The ESC will monitor batteries all the time, once the voltage is lower than preset value, the power will be reduced immediately and be cut off in a few seconds. BEC voltage is optional 6v/7.4v/8.4v, up to your servo spec. The brake force and reverse force is programmable for enhancing drivability. Thermal management is meticulously designed. With the integration of a forged Al heatsink, the design maximizes the airflow throughout the system and cool down critical components, keeping your vehicle working at optimal condition. You can tune the parameters of ESC for different driving condition, from rugged terrains to pavement, off-road or on-road, Xiongcai E3 motor controller or ESC will promote the performance to a new level. Xiongcai has been specializing the ESC design and manufacture for 15 years, and committed to promote drivability of R/C model cars. Xiongcai team is capable of excellent RD ability, if you have any special requirements on your motor control, we will help you achieve your idea. Parts are applied by top brands in auto industry such as NISSAN, XPeng, FAW Group, FAWDE, Jingyi Group, Feilong Auto Parts, Shenhai Electrical Appliance, Huirun Electrical Machinery and more.  We are a IATF16949:2016 certified company, parts are certified by, CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637. Contact us and have a try. visit http://en.xc-bldc.com or google Shenzhen Xiongcai Technology Co., Ltd, we are ready to put your R/C cars and trucks in extreme.

Minimum Order: 300

A Motor Controller for Automotive Water Pump That Would Never Be Damaged Since 2011, Xiongcai Technology has been a pioneering company in specialized field of motor controller for automotive electronics. Founded by experienced engineer, XIONGCAI TECH is one the few manufacturers that focus on motor controller (electronic speed control or ESC), especially in water pump for auto engine. Xiongcai released a water pump motor controller XCC107 which has been used in automotive engine already. In 2016, Feilong Automotive Component, a company with 60-year history in automotive component industry, contacted us and inquired about motor controller for automotive fuel pump. The client was really picky and particular, their engineer team set a standard on protection measure beyond the industry. They said they had met several suppliers, some items of the standards were unacceptable, because if all items met this extremely high standard, the cost would exceed cost budget. Xiongcai team wanted to give a shot. Engineered from ground up, Xiongcai R&D team designed a combination of software and hardware meticulously called XCC107, making all parameters up to customer’s standard. After one year test and verification, Xiongcai XCC107 motor controller for water pump was approved. The client has introduced this product for 6 years till now. Xiongcai XCC107 Motor Controller For Water Pump provides protection measures including under voltage, over voltage, over current, low temperature, over temperature, plugging, reverse connection, short circuit, this means the motor controller may stop working due to some reason but never be damaged. We are one of the few engineering companies providing a full service from design to supply of product, which means we design, analyze, test and supply finished products. Xiongcai is serving top clients in auto industries, Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Kesen, Unicent and more. Visit http://en.xc-bldc.com or google Shenzhen Xiongcai Technology Co., Ltd for detail. We try to assist you in achieving your idea.

Minimum Order: 300

Xiongcai XCA105 Motor Controller For Automotive Fuel Pump Focusing on motor control, with 12-year experience, Xiongcai Technology, a pioneering company in specialized field of motor control. Parts are imported by top brands in auto industry such as NISSAN, XPeng, FAW Group, FAWDE, Jingyi Group, Feilong Auto Parts, Shenhai Electrical Appliance, Huirun Electrical Machinery and more. Founded by experienced engineer, started the innovative journey in motor control. Established in 2011, Xiongcai Technology emerged as a pioneer driven by a commitment to drive motor more efficienctly and put your devices to their limit. We are one of the few engineering companies providing a full service from design to supply of product, which means we design, analyze, test and supply finished products. Xiongcai released a motor controller XCA105, engineered for automotive fuel pump. With pwoer system of 8A current, DC8-18V, push the performance to its limit. Minus 40 degree to 125 degree working temperature enables the motor controller work at any weather condition. The dimension is 37*34*8mm, compact design makes installation more flexible. You don't need to make a big space for this component. Safety is vital to automotive application. It's small, but It is engineered to function without sacrificing safety. The protection measures includes under voltage, over voltage, over current low temperature, over temperature, plugging, reverse connection and short circuit protection. safety is always the first priority. Contact Shenzhen Xiongcai Technology Co., Ltd for more detail.

Minimum Order: 300

Brushless DC Motor Controller Keeps Automotive Water Pump Run More Efficiently With 12-year experience in motor control, Xiongcai Technology, a pioneering company in specialized field of motor control. Parts are imported by top brands in auto industry such as NISSAN, XPeng, FAW Group, FAWDE, Jingyi Group, Feilong Auto Parts, Shenhai Electrical Appliance, Huirun Electrical Machinery and more. Xiongcai motor control company is one of the few engineering companies providing a full service from design to supply of product, which means we design, analyze, test and supply finished products. Xiongcai released a motor controller XCC107, engineered for automotive water pump. With pwoer system of 4.6A current, DC16-36V, push the performance to its limit. Minus 40 degree to 125 degree working temperature enables the motor controller work at any weather condition. The dimension is 61*56*17mm, compact design makes installation more flexible. You don't need to make a big space for this component. Safety is vital to automotive application. It's small, but It is engineered to function without sacrificing safety. The protection measures includes under voltage, over voltage, over current low temperature, over temperature, plugging, reverse connection and short circuit protection. safety is always the first priority. Certified by: CSIPER 25 ISO11452-2 ISO10605 ISO 16750 ISO7637 Visit http://en.xc-bldc.com or google Shenzhen Xiongcai Technology Co., Ltd for detail.

Minimum Order: 300

E3 Electronic Speed Control (ESC) With 400A,6-12S,16-54V Power System Put R/C Model Car and Truck In Extreme. The Xiongcai E3 electronic speed control (ESC, motor controller) is packed with a potent combination of hardware and software advancements. This product is designed for high-level R/C car sport. 6-12S, 400A continuous current, 16-54V, the power system will push your vehicles to their limit and beyond. It’s one of the most powerful motor controllers for R/C car and truck. Even Xiongcai E3 ESC is a power monster, it is still under control. For the safety, Xiongcai team designed excellent protection measures. Low voltage and over voltage protection. The ESC will monitor batteries all the time, once the voltage is lower than preset value, the power will be reduced immediately and be cut off in a few seconds. BEC voltage is optional 6v/7.4v/8.4v, up to your servo spec. The brake force and reverse force is programmable for enhancing drivability. Thermal management is meticulously designed. With the integration of a forged Al heatsink, the design maximizes the airflow throughout the system and cool down critical components, keeping your vehicle working at optimal condition. You can tune the parameters of ESC for different driving condition, from rugged terrains to pavement, off-road or on-road, Xiongcai E3 ESC will promote the performance to a new level. Xiongcai Tech has been specializing the motor controller (ESC) design and manufacture for 15 years, and committed to promoting drivability of R/C model cars. Xiongcai team is capable of excellent RD ability, if you have any special requirements on your motor control, we will help you achieve your ideas. Contact us and have a try. visit http://en.xc-bldc.com or search Shenzhen Xiongcai Technology Co., Ltd, we are ready to put your R/C cars and trucks in extreme.

Minimum Order: 300

The Protection Measures of Xiongcai E3 Motor Controller For RC Car Xiongcai has been specialized in motor controller for automotive fuel/water pump, RC car and medical devices since 2011, and focusing on motor controller only. I know that our clients can search a lot of companies that manufacture motor controller, but you will find that most of them provide OEM only. We are one of the few motor controller suppliers providing a full service from design to supply of finished product. As an engineering oriented company, we provide solution according to customer’s application. For example, Xiongcai designed a high performance motor controller for RC car for a client. I believe most of manufacturer could make powerful motor controller, but the most important thing is how to control the power and eliminate the negative impact. Xiongcai E3 motor controller is such a perfect product for RC car for a notable brand. With 400A continuous current, 800A peak current, 6-12S Lipo cells, 16- 54v high performance power system, how to control the monster? Xiongcai RD team designed perfect protection measures to protect the motor and keep it work at its best. 1. Peak current limit. This measure will limit the peak current to avoid damage to motor; 2. Single PWM periodical current detection limit enables reducing impact of pulse current to motor; 3. Intelligent thermal performance. Fans will be turned on or turned off automatically according to internal temperature; also when abnormal heavy current is detected, the motor controller will cut off power supply. 4. When a short-circuit takes place in fan, the test mode will start running. If the fan can’t be recovered in three times test, the power to fan will be cut off, and the ESC is still working; And there are some more protection measures, including low voltage protection, throttle loss protection, abnormal braking protection, over-temperature protection etc. Xiongcai motor controllers have been applying in top brands in automotive industries, such as Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Kesen, Unicent and more. We can put your RC car in extreme. Have a try, we’ll deliver excellent solutions according to your ideas. Visit http://en.xc-bldc.com or search Shenzhe Xiongcai Technology for more.

Minimum Order: 300

Xiongcai XC303 Motor Controller Motor Drive For Strker #6,#7,#8 Bone Drill As Replacement For Maintenance Xiongcai has been specialized in motor controller for automotive fuel/water pump, RC car and medical devices since 2011, and focusing on motor controller only. We provide expertise solution of motor control. In earlier October, one customer from Brazil, found us from internet. He sent an email trying to inquire about motor controller. He said he ran maintenance business on Stryker bone drills, especially the Stryker6/7/8, a lot of damaged bone drill were abandoned due to lack of replacement motor control, because he could find a ssupplier providing replacements. Actually we do have some types of motor control for bone drill application, providing equivalent performance. The customer said he bought some replacements before, but after he installed motor controller into bone drill, he found that some of the bone drill failed to work at its best and some of them does not work at all. We ask him to send us some pictures of components. After checking the PCB, we found that the triggers of bone drill and Hall sensors did not matched precisely. The distance of triggers are not the same with the distance between Hall sensors. In this case, the magnet installed on the triggers could not activate the Hall sensors, so the devices failed to work or failed to work at their best. We asked the customer to show us instruction, and check the installation dimensions. Then we recommended two types XCB302 and XC303 motor controller, which matched devices precisely. The customer said the previous supplier did not check the detail and just sold him products, and he wanted to bought several pieces each from us for test because he felt that we were responsible and professional. Three weeks later, customer came back to us and told us the motor controller had been installed perfectly and worked at their best. Xiongcai Technology investment into research and development enable the company to be at the leading edge of technological development, delivering excellent products to customers. Contact us and have a try. Visit http://en.xc-bldc.com or search Shenzhen Xiongcai Technology Co., Ltd, we will deliver efficient solution to you.

Minimum Order: 300

Xiongcai E3 Motor Controller For RC Car-High Performance and Reliability, We have Both Xiongcai has stayed focused on motor controller for automotive fuel pump, water pump, RC car & truck, drones and medical devices since 2011, and focusing on motor controller only. I know that our clients can search a lot of companies that manufacture motor controller, but you will find that most of them provide OEM only. We are one of the few motor controller suppliers providing a full service from design to supply of finished product. Engineered from ground up, we provide solution according to customer’s application. For example, Xiongcai designed a high performance motor controller for RC car for a client. I believe most of manufacturer could make powerful motor controller, but the most important thing is how to control the power and eliminate the negative impact. Xiongcai E3 motor controller is such a perfect product for RC car for a notable brand. With 400A continuous current, 800A peak current, 6-12S Lipo cells, 16- 54v high performance power system, how to control the monster? Xiongcai RD team designed perfect protection measures to protect the motor and keep it work at its best. 1. Peak current limit. This measure will limit the peak current to avoid damage to motor; 2. Single PWM periodical current detection limit enables reducing impact of pulse current to motor; 3. Intelligent thermal management. Fans will be turned on or turned off automatically according to internal temperature; also when abnormal heavy current is detected, the motor controller will cut off power supply. When a short-circuit takes place in fan, the test mode will start running. If the fan can’t be recovered in three times test, the power to fan will be cut off, and the ESC is still working; And there are some more protection measures, including low voltage protection, throttle loss protection, abnormal braking protection, over-temperature protection etc. Xiongcai motor controllers have been applying in top brands in automotive industries, such as Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Kesen, Unicent and more. We can put your RC car in extreme. Have a try, we’ll deliver excellent solutions according to your ideas. Visit http://en.xc-bldc.com or search Shenzhe Xiongcai Technology for more.

Minimum Order: 300

Xiongcai XC303 Motor Controller Provides Equivalent Performance to Stryker's Products Xiongcai has been focusing on motor controller for automotive fuel/water pump, RC car and medical devices since 2011, and focusing on motor controller only. We provide expertise and solution. In earlier October, one customer from Brazil, found us from internet. He sent an email trying to inquire about motor controller and find replacements to Stryker6/7/8 for his maintenance business on Stryker bone drills, especially the Stryker6/7/8, a lot of damaged bone drill were abandoned due to lack of replacement motor control, because he could find a ssupplier providing replacements. Actually we do have some types of motor control for bone drill application, providing equivalent performance. The customer said he bought some replacements before, but after he installed motor controller into bone drill, he found that some of the bone drill failed to work at its best and some of them does not work at all. We ask him to send us some pictures of components. After checking the PCB, we found that the triggers of bone drill and Hall sensors did not matched precisely. The distance of triggers are not the same with the distance between Hall sensors. In this case, the magnet installed on the triggers could not activate the Hall sensors, so the devices failed to work or failed to work at their best. We asked the customer to show us instruction, and check the installation dimensions. Then we recommended two types XCB302 and XC303 motor controller, which matched devices precisely. it's not sophisticated, but it need profession, not just technology, but also service. The customer said the previous supplier did not check the detail and just sold him products, and he wanted to bought several pieces each from us for test because he felt that we were responsible and professional. Three weeks later, customer came back to us and told us the motor controller had been installed perfectly and worked at their best. Xiongcai Technology investment into research and development enable the company to be at the leading edge of technological development, delivering excellent products to customers. Xiongcai motor controllers have been applying in top brands in automotive industries, such as Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Kesen, Unicent and more. We can put your RC car in extreme. Contact us and have a try. Visit http://en.xc-bldc.com or search Shenzhen Xiongcai Technology Co., Ltd, we will deliver efficient solution to you according to your ideas.

Xiongcai Motor Controller Approved By Chinese Greatest Auto Group-FAW Group. Founded by experienced engineer, XIONGCAI TECH is one of the few manufacturers that focus on motor controller (electronic speed control or ESC), especially in automotive fuel pump. Xiongcai launched a motor controller XCA105 which was engineered for automotive fuel pump. In 2017, Keshen Auto Parts, a company specialized in design and manufacture of automotive fuel pump, contacted us and inquired about motor controller for their products. The client was really picky and particular, their engineer team set a standard on protection measure beyond the industry because this product is designed for the greatest automobile group in China—FAW. . They said they had met several suppliers, some items of the standards were unacceptable, because if all items met this extremely high standard, the cost would exceed cost budget. Xiongcai team wanted to give a shot. Engineered from ground up, Xiongcai R&D team designed a combination of software and hardware meticulously called XCA105, making all parameters up to customer’s standard. After one year test and verification, Xiongcai XCA105 motor controller for water pump was approved. The client has introduced this product for 6 years till now. Xiongcai XCA105 Motor Controller For Water Pump provides protection measures including under voltage, over voltage, over current, low temperature, over temperature, plugging, reverse connection, short circuit, this means the motor controller may stop working due to some reason but never be damaged. We are one of the few engineering companies providing a full service from design to supply of product, which means we design, analyze, test and supply finished products. Xiongcai is serving top clients in auto industries, Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Keshen, Unicent and more. Contact us http://en.xc-bldc.com or search Shenzhen Xiongcai Technology for more. We try to assist you in achieving your ideas.

Minimum Order: 300

Protection Measures of E3 Motor Controller Keep Your RC Car Safe while Xiongcai has been focusing on motor controller for automotive fuel/water pump, RC car and medical devices for 12 years, and focusing on motor controller only. I know that our clients can search a lot of companies that manufacture motor controller, but you will find that most of them provide OEM only. We are one of the few motor controller suppliers providing a full service from design to supply of finished product. As an engineering oriented company, we provide solution according to customer’s application. For example, Xiongcai designed a high performance motor controller for RC car for a client. I believe most of manufacturer could make powerful motor controller, but the important thing is how to control the power and eliminate the negative impact. Xiongcai E3 motor controller is a high performance product designed for RC car for a notable brand. With 400A continuous current, 800A peak current, 6-12S Lipo cells, 16-54v high performance power system, how to control the monster? Xiongcai RD team designed perfect protection measures to protect the motor and keep it work at its best. Peak current limit. This measure will limit the peak current to avoid damage to motor; Single PWM periodical current detection limit reduce impact of pulse current to motor; Fans will be turned on or turned off automatically according to internal temperature; also when abnormal heavy current is detected, the motor controller will cut off power supply to fan, When a short-circuit takes place in fan, the test mode will start running. If the fan can’t be recovered in three times of test, the power to fan will be cut off, and the ESC is still working; Waterproof is designed for all weather condition, up to IP67. The ESC is potted in epoxy to protect the electronics and improve heat transfer, enabling motor controller working in any condition at a lower tempearture; And there are some more protection measures, including low voltage protection, throttle loss protection, abnormal braking protection, over-temperature protection etc. Xiongcai motor controllers have been applying in top brands in automotive industries, such as Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Kesen, Unicent and more. We can put your RC car in extreme. Have a try, we’ll deliver solution according to your ideas. Visit http://en.xc-bldc.com or search Shenzhe Xiongcai Technology for more.