Electronics & Electrical

High and stableoperating voltage Low self discharge rate(less than 2% after 1 year of storage at 25℃) Long storage life Full seal Stainless steel container(with low magnet) Widely operating temperature range Hermetic glass-to-metal sealing Non-flammable electrolyte Specification: Nominal Capacity 8000mAH Nominal Voltage 2.9V Max.Continuous Current 2000mA Max.Pulse Capability 4000mA Storage(recommended) Max.30℃ Operating Temperature Range -55℃～+65℃ Weight Approx.90g Application: Widely used in intelligent electricity meters, water meters, heat meters, gas meters, memory backup, clock power supply, data backup power supply, smoke alarms, temperature monitors, positioning devices, marine telemetry systems, tire pressure detection systems, ETC (toll collection system), automated instrumentation equipment, oil wells, mines, medical equipment anti-theft alarms, wireless communication, marine lifesaving, aerospace, marine electronics, night vision devices, temperature monitor, intelligent pressure transmitter.etc.

Minimum Order: 500

2700 lifepo4 battery is a mature cylindrical battery, widely used in many fields like lighting, power supply, motive power supply. UPS, Electric Power, Lighting, Electric Bicycle, Medicle Device,etc. Features: No memory effect Ready to charge and use at any time Stable voltage Effectively preventing damage to the host caused by unstable currents Low energy consumption The battery adopts low self discharge technology to reduce the natural loss of electricity Stable performance Service life 2000 times Application areas: Two wheeled bicycles, Lithium batteries are widely used in various fields: digital products, medical equipment, public equipment, communication equipment, automobiles, drones, small household appliances, portable energy storage, etc.

Minimum Order: 20000

3C Discharge rate 18650 2200mAH, 2500mAH, 3000mAH,3500mAH,3800mah lithium battery Long cycle: supports 1000 cycle lengths; High discharge rate: Supports 1C,2C,3C,10A discharge cycle; Low temperature rise: has lower internal resistance and lower discharge temperature rise; Application areas: Two wheeled bicycles, small household appliances, portable energy storage, etc. Application areas: Two wheeled bicycles, small household appliances, portable energy storage, etc.

Minimum Order: 20000

Product date: Model Name:PHILIPS LED Strip HLS288 Plus 11.5W 4000K 30M IP20 929002597801  Wattage:11.5W Color temp:4000K Voltage:220V Lumen:1000LM/M Le , ngth:30M/ROLL 12NC:929002597801  Product Detail PHILIPS LED Strip Light  HLS288 No main light application, simple and elegant More than 120pcs of LEDs per meter, tightly arranged and evenly blended Bright light effect with realistic colors, new generation PCV with 85% light transmittance, and higher light transmittance for brighter colors Strong, sturdy, safe, and durable, the new generation PCV has better softness, complies with IEC, and flame retardant materials are safer Efficient LED chip>75LM/W, energy-saving 15000 hour lifespan, CRI80

Product Date: Moden No:BMT-BST21A Model Name:PHILIPS OEM LED Street Light BMT-BST21A Wattage:50W/100W/150W/240W Voltage:100-277V PF:0.9 CRI:70 IP:IP LEVEL:IP65 LED CHIP:PHILIPS COB LED Driver:PHILIPS Driver LM/W:110-140LM/W

Product description  PHILIPS Ultinon LED Headlight bulb S25 12V 5W 11499ULWX2 BA15s 867000149573 • Technology: LED  • Application: Stop/tail  • Range: Ultinon LED  • Type: P21/5W  • Homologation  • ECE: NO • Base: BA15s  • Designation LED Type: LED-S25 [~P21/5W]  • Technical features: Instant on PHILIPS Auot Ultinon HID Headlight bulb  Bright signals. Stylish driving. For a stylish drive, benefit from signaling lights with intense colors. Philips Ultinon LED T10 interior & positioning lights with 6000 K daylight effect are bright and look good so you can signal in safety and with style Upgrade your lights, upgrade your style While the main goal of exterior lighting is to help you see and be seen, there’s no reason why you shouldn’t look good at the same time. If you’re looking to upgrade your style, without buying a newer car, replacing your interior and exterior lighting with LEDs is a smart way to spend your money. Upgrade your exterior lighting with a more intense red for stop lights, a vibrant amber for turning signals and bright white light for positioning and reversing. Your car is an expression of who you are, so make a style statement with Philips exterior signaling LED lights. Brighter signals for improved safety Signaling the intended movement of your vehicle is vital to your safety. To avoid collisions, other people need to know what you’re doing. Bright signaling light ensures you are seen for improved safety. Whether it’s reversing, positioning or stopping, Philips Ultinon LED signaling lights provide you with the performance you need, giving other drivers vital extra time to react to your movements. Durable and long-lasting LED lighting You want bright and stylish car lights. But you don’t want to keep replacing failed lamps. That is a major weakness of conventional headlights; the more powerful the light, the shorter its lifespan. At the same light intensity, LEDs last longer. And Philips Ultinon LED lights have additional resistance to heat and vibration, making them a perfect choice for long-lasting performance. Upgrade your style  • Upgrade your lights, upgrade your style  Brighter LED exterior lights  • Brighter signals for improved safety  Long lasting LED lights  • Durable and long-lasting LED lighting  Durable Philips quality  • Philips automotive lighting at the highest quality level  • Easy installation and compatible with many car models  Good light diffusion  • Good light distribution for enhanced visibility

Product Date: PHILIPS MASTER LED 4-35W 3000K MR16 24D 929001147708 Base:MR16 Color temp:3000K Lumen:240lm Dimmable:NO Wattag , e:4W Voltage:AC 12V CRI:80 12NC:929001147708 Philips MASTER VALUE MR16 is the series of Low Voltage (12VAC) Halogen MR16 replacements. Not only does it employs Philips' patented solution to guarantee the broadest possible compatibility with standard 12V Halogen electronic transformers. The light source also delivers beam intensity which is equivalent to the 50W Philips Halogen MR16 lamps. The form-factor of Philips MASTER Value LED MR16 from BMT lighting guarantees a 100% form on the back- side of the lamp (exact form with Halogen lamps.)

The Delta Amplon N series Gen3 1-3kVA tower online ups power supply system adopts an online dual converter circuit structure and a compact tower design. It can provide clean sine wave input power for IT facilities and other precision equipment, preventing work interruption, data loss, or equipment damage caused by voltage dips, spikes, harmonic distortion, and other power supply failures. -Why did I choose Delta Amplon N series Gen3 1-3kVA tower online ups power supply High availability The output power factor is as high as 0.9, which can provide more active power support for the load

Product date PHILIPS DL264 Metal led downlight 3.5W 6500K D75 BK 929003239909 Wattage:3.5W 12NC:929003239909< , br>Cut out:68-80mm Dimension:D95*H49.5mm PHILIPS Metal led downlight 3.5W 6500K D75 BK 929003239909 Exquisite craftsmanship, flexible and versatile Exquisite surface treatment highlights the low-key and restrained texture of the lamp, suitable for various decoration styles Modular design Multi-color selection One-piece modular design, simple and elegant; provide matte (white/silver/gold) three colors, easier to match different space colors Complete size and convenient application Various sizes and brightness can meet various application fields High efficiency, safety, long life and energy saving Using high-efficiency LEDs, the luminous efficacy reaches 97lm/W (6.5W), and has a long service life of 25,000 hours, saving maintenance costs

Limit Switch for Door Limit switch for door is used to provide feedback when a motorized door closes to a certain position to interrupt the current action or to give feedback on closing in place for other controls to ensure the safety of the process. Door limit switches are particularly useful when implementing circuit boards to simulate the closing of a door. Safety limit switch for door is available with different drive heads and contact blocks to meet all installation requirements. Welcome to contact us! Model Designations: Limit Switch for Door Item Code Description ①Conduit / connector size 1 Pg13.5   (1 conduits type) 2 G1/2   (1 conduits type) 4 M20   (1 conduits type)   (Default) ② Built-in switch A 1NC/1NO (slow-action type) B 2NC (slow-action type) ③Head Mounting Direction F Four mounting directions possible  (Front-side mounting at   shipping)/plastic D Four mounting directions possible  (Front-side mounting at   shipping)/metal Door limit switch characteristics Rating 3A 240VAC (A300) Operating speed 0.1m ~0.5m/s Contact resistance 25mΩ max. (initial).  Insulation resistance 100mΩ min. (at 500VDC) Dielectric strength AC2500V/Umip 4KV Vibration 10-55HZ，1.5mm double-amplitude Shock Mechanical: Approx. 1000m/s2 (Approx. 100G'S) Electrical: Approx. 300m/s2 (Approx. 30G'S) Ambient temperature -10℃ ~+70℃ ( With no icing) Ambient Humidity < 95% RH Life Above 300,000 Operating frequency 30 operations/min. Weight About 96g(T4N-4AF-K1) About 104G(with M20 gland) Degree of protection IP66 (initial) Operating Characteristics Key plug in force Max. 14.7N(1,500gf) Key pull out force Max. 29.42N(3,000gf) Pretravel 6±3mm Total travel (28mm) Force required to have positive Min. 58.84N(6,000gf) Positive opening travel Min. 10mm Ratings Sheet Rated voltage Noninductive Load (A) Inductive Load (A) Rated voltage Lamp Load Inductive Load Motor Load NC NO NC NO NC NO NC NO 125 VAC 5 (0.1)  1.5  1 0.7 0.5 3 2 2.5 1.5 1.3 0.8 250 VAC 3 8 VDC 5 (0.1) 2 5 4 3 14 VDC  5 (0.1)  2 4 4  3  30 VDC 4 (0.1)  2 3 3  3  125 VDC 0.4  0.05 0.4 0.4  0.05  250 VDC 0.2 0.03 0.2 0.2 0.03

Whisker Limit Switch TMAZTZ offer a wide range of whisker limit switches in different sizes. If you have any questions please contact us and we will provide you with the right limit switch for you. We have a perfect quality control system, and you can trust the quality of our products. Data Ratings Rated voltage Noninductive Load (A) Inductive Load (A) Resistance Load Lamp Load Inductive Load (A) Motor Load NC NO NC NO NC NO NC NO 125VAC 5 5 1.5 0.7 3 3 2 1 250VAC 5 5 1 0.5 3 3 1.5 0.8 8VDC 5 5 3 3 5 4 3 3 14VDC 5 5 3 3 4 4 3 3 30VDC 5 5 3 3 4 4 3 3 125VDC 0.4 0.4 250VDC 0.2 0.2 Inrush Current N.C: below  24A, N.O: below  12A NOTE:  1. Inductive load has a power factor of 0.4 min.(AC) and a time constant of 7 msec.max.(DC). 2. Lamp load has an inrush current of 10 times the steady-state current,while motor load has an inrush current of 6 times the steady-state current. 3. Product with spring, its usable range of operating part is within one third of the whole spring length from the front end of spring. Whisker limit switch characteristics ■ Double-circuit type of limit switch. ■ Compact new design approximately 1/3 the size of TMAZTZ vertical limit switches. ■ With strong zinc cast base, and reinforced plastics outer shell, High. Structure preventing oil, water and pressure. ■ Structure enables the terminal section to be fully opened for easy wiring. ■ Degree of protection: IP65 Operation speed 0.5mm-50cm/sec Operating frequency Electical: 30 operations/minute Contact resistance 25mΩ max. (initial value) Insulation resistance 100MΩ min. (below 500VDC) Shock Mechanical durable: 1, 000m/Sec2 (about 100G'S) Malfunction: 300m/Sec2 (about 30G'S) Ambient temperature -5~+65℃ (With no icing) Humidity <95% RH Weight About 130 to 190g Degree of protection IP65 Electrical Life Above 500000 Operating Characteristics Operating Characteristics  Model TZ-8104 TZ-8107 TZ-8108 TZ-8111 TZ-8112 TZ-8122 TZ-8166 TZ-8167 TZ-8168 TZ-8169 Operating force OF    (Max) 5.88N 5.88N 7.84N 9.8N 9.8N 9.8N 0.88N 0.88N 0.88N 0.88N Release force RF    (Min) 0.49N 0.69N 0.49N 2.94N 2.94N 2.94N 一 一 一 一 Pre-travel PT    (Max) 20° 20° 20° 1.5mm 1.5mm 1.5mm 30mm 30mm 30mm 30mm Over-travel OT    (Min) 75° 75° 75° 4mm 4mm 4mm 一 一 一 一 Movement differential MD   (Max) 10° 10° 10° 1.2mm 1.2mm 1.2mm 一 一 一 一 Total travel TT    (Min) 95° 95° 95° 5.5mm 5.5mm 5.5mm 一 一 一 一 Operational position OP 一 一 一 26±0.8mm 一 一 一 一

■ High accuracy of action position; ■ Good shock resistance, maximum 1000m/s2; ■ High-strength shell, when mounting, the plastic shell can withstand torsional moment of 6kgf.cm without break. Ratings Item  nominal voltage Noninductive Load (A) Inductive Load (A) Inrush Current(A) Spec. Resistance Load Lamp Load Inductive Load Motor Load NC NO NC NO NC NO NC NO NC NO 16A 250VAC 16 2 10 3 40max. 8VDC 16 4 10 6 30VDC 10 4 10 4 125VDC 0.6 0.1 0.6 0.1 250VDC 0.3 0.05 0.3 0.05 Characteristics Operation speed 0.1mm~1m/s( Button type) Operating frequency Electrical：20 operations/min Insulation resistance 100mΩ above(at 500VDC) Contact resistance 15mΩmax. (initial value) Withstand voltage Non-continuous terminals 1,000VAC, 50/60Hz  Continue1min current-carrying and non-current-carrying metal parts,  Between terminal and earthing 2,000VAC, 50/60Hz  Continue1min Vibration Misoperation 10 to 55Hz,1.5mm pairs swing Shock Misoperation Max 300m/S2(about 100G) Temperature -10~+65℃(no ice) Humidity Under 85%RH(+5~+35℃) Weight Approx 6.2g (button type) Electrical life Above300000 Operating Characteristics Operating Characteristics Model V-15 V-151 V-152 V-153 V-154 V-155 V-156 Operating force OF  (Max) 1.96N 1.96N 1.23N 0.69N 1.23N 2.35N 1.23N Release force RF  (Min) 0.49N 0.49N 0.14N 0.06N 0.14N 0.49N 0.14N Pre-travel PT  (Max) 1.2mm 1.6mm 4.0mm 9.0mm 4.0mm 1.6mm 4.0mm Over-travel OT  (Min) 1.0mm 0.8mm 1.6mm 2.0mm 1.6mm 0.8mm 1.6mm Movement differential MD (Max) 0.4mm 0.6mm 1.5mm 2.8mm 1.5mm 0.6mm 1.5mm Operational position OP 14.7±0.4mm 15.2±0.5mm 15.2±1.2mm 15.2+2.6mm 15.2-3.2mm 18.7±1.2mm 20.7±0.6mm 20.7±1.2mm

■ Forced open action device(NC contacts only), it can disconnect the contact when the contact has fusing and other failures. ■ Standardized gold-clad contacts provide high contact reliability, Can be used with both standard loads and microloads. ■ Strengthened top seal structure improves the sealing performance. ■ Built-in contact holder has fast-action type: 1NC/1NO; Slow-action: 1NC /1NO and 2NC. Characteristics Protection level*1 IP66 Life*2 Electrical More than 300,000 times (AC250V 10A, resistive load) Electrical More than 500,000 times (AC250V 3A, resistive load) *3 Operating speed 1 ～ 500mm/s(T4N-4120) Operating frequency Max. 30 times/min Contact resistance 25 mΩ or less Minimum working load *4 1mA resistive load below DC5V (N standard reference value) Rated insulation voltage (Ui) 300V Electric shock proof protection grade Class II (double insulated) Pollution degree (environmental conditions) Pollution degree 3 (EN60947-5- 1) Withstand voltage (EN60947-5-1) Between homopolar terminals: 2.5kV Between heteropolar terminals: 2.5kV Between terminals and uncharged metal parts: 6kV insulation resistance Above 100MΩ Contact gap Minimum 2×0.5mm quick-action type, Minimum 2×2mm slow-action type Vibration Malfunction 10 ～ 55Hz 0.75mm single amplitude Impact Duration 1,000m/s2 Malfunction 300m/s2 Ambient temperature -20 ～ +70℃ (No ice or dew) Ambient humidity Less than 95% RH Weight About 73g (T4N-4120) About 82g (T4N-4120 with gland) Note1:The above values are initial values. Note2:Once the contact is connected to a standard load, it can not be used to connect a smaller load. If so, the contact may result in rough surface, thus losing contact reliability. ①The protection level is gotten based on test method of (EN60947-5-1). Please make sure its sealing under actual environmental conditions before use. The switch box has dust and oil resistance structure, but it should be used in places without dust, oil and chemicals. Otherwise it may lead to premature wear, damage or malfunction. ②The durability is for ambient temperature of 5℃ ~ 35℃ and humidity of 40% to 70% RH. ③For additional details, please contact us. ④When the ambient temperature is above 35℃ , more than 2 circuits 3A 250VAC loads are prohibited. ⑤The values will vary with different switching frequency, environmental conditions, reliability level and other factors. Please confirm on the actual load in advance. The mechanical life of deadman lever type is more than 10,000,000 times. Safety Limit Switch Model Designations Item Code Description ① Conduit / connector size 1 Pg13.5 (1 conduit type) 2 G1/2 (1 conduit type) 4 M20 (1 conduit type) 5 Pg13.5 (2 conduits type) 6 G1/2 (2 conduits type) 8 M20 (2 conduits type) ② Built-in switch 1 1NC/1NO (quick-action type) 2 2NC (quick-action type) A 1NC/1NO (slow-action type) B 2NC (slow-action type) ③Head and driving rod 20 Roller lever (resin lever, resin ball) 22 Roller lever (metal lever, resin ball) 25 Roller lever (metal lever, metal resin ball) 2G Adjustable roller lever, Form Lock (metal lever, resin ball) 2H Adjustable roller lever, Form Lock (metal lever, rubber ball) 2M Adjustable roller lever, Form Lock (metal lever, metal resin ball) 31 Top plunger type 32 Top plunger ball type 62 Unilateral cantilever ball type (horizontal) 72 Unilateral cantilever ball type (vertical) 80 Whisker type 87 Plastic stick type

■ Stainless steel idler wheel, punch and spring; ■ Selective M18x1.5 cable gland. Ratings Rated voltage Noninductive Load (A) Inductive Load (A) Resistance Load Lamp Load Inductive Load (A) Motor Load NC NO NC NO NC NO NC NO 125VAC 5 5 1.5 0.7 3 3 2 1 250VAC 5 5 1 0.5 3 3 1.5 0.8 8VDC 5 5 3 3 5 4 3 3 14VDC 5 5 3 3 4 4 3 3 30VDC 5 5 3 3 4 4 3 3 125VDC 0.4 0.4 250VDC 0.2 0.2 Inrush Current N.C: below  24A, N.O: below  12A NOTE:  1. Inductive load has a power factor of 0.4 min.(AC) and a time constant of 7 msec.max.(DC). 2. Lamp load has an inrush current of 10 times the steady-state current,while motor load has an inrush current of 6 times the steady-state current. 3. Product with spring, its usable range of operating part is within one third of the whole spring length from the front end of spring. Characteristics Operation speed 0.5mm-50cm/sec Operating frequency Electical: 30 operations/minute Contact resistance 25mΩ max. (initial value) Insulation resistance 100MΩ min. (below 500VDC) Dielectric Strength 1000VAC, 50/60 Hz for 1 minute between terminals of the same polarity 1500VAC, 50/60 Hz for 1 minute between current-carrying and non- current-carrying metal parts 1500VAC, 50/60 Hz for 1 minute between each terminal and ground Vibration 10-55Hz,1.5mm double amplitude Shock Mechanical durable: 1, 000m/Sec2 (about 100G'S) Malfunction: 300m/Sec2 (about 30G'S) Ambient Temperature  -10~+65℃ (With no icing) Humidity <95% RH Weight About 195 to 246g Electrical Life Above 500000 Degree of protection IP65 Operating Characteristics Operating Characteristics Model TSA-001 TSA-003 TSA-012 TSA-021 TSA-041 TSA-031 TSA-051 TSA-061 TSA-071 TSA-081 Operating force OF  (Max) 7.84N 7.84N 7.84N 3.92N 3.92N 3.92N 3.92N 1.47N 1.47N 1.47N Release force RF  (Min) 3.92N 3.92N 3.92N 0.98N 0.98N 0.98N 0.98N 0.49N 0.49N 0.49N Pre-travel PT  (Max) 1.8mm 1.8mm 1.8mm 20° 20° 20° 20° 30mm 30mm 30mm Tripping position TP±10% 2.0mm 2.0mm 2.0mm 22.5° 22.5° 22.5° 22.5° 22.5° 22.5° 22.5° Movement differential MD (Max) 1.2mm 1.2mm 1.2mm 10° 10° 10° 10° 14° 14° 14° Over travel OT  (Min) 4.0mm 4.0mm 4.0mm 75° 75° 75° 75° 20mm 20mm 20mm Total travel TT  (Min) 5.8mm 5.8mm 5.8mm 95° 95° 95° 95° 50mm 50mm 50mm Rotary indexing 22.5° 22.5° 22.5° 22.5° visit our website: https://www.chinalimitswitch.com/limit-switch/