Electronics & Electrical

Product Description: The optical fiber connector is one of the most basic passive components in the optical fiber communication. There are difference ferrule materials (ceramic, plastic, metal), a variety of body and boot color to choose. Through the process of curing and polishing, etc., the connector is combined with various of fiber optic cable and made into different kinds of patchcord (jumper), which have been widely applied to the CATV system, communications system, FTTx system, Local Area Networks, Wide Area Networks, Metro,Test equipment,Active device termination and so on. Technical Parameter: Fiber Type SM MM Connector Type SC,FC,ST,E2000,LC,MU,DIN MTRJ SC,FC,ST,E2000,LC,MU MTRJ Insertion Loss(Typical) ≤ 0.2dB ≤ 0.4dB ≤ 0.2dB ≤ 0.4dB Insertion Loss(Max) ≤ 0.3dB ≤ 0.5dB ≤ 0.3dB ≤ 0.5dB Return Loss(Typical) PC ≥ 50dB ≥ 35dB - UPC ≥ 55dB - - APC ≥ 65dB - - Durability(500ºC) 0.2dB Temperature Stability 0.3dB Operation Temperature -40ºC~+85ºC Storage Temperature -40ºC~+85ºC Application: 1. CATV 2. Telecom Network 3. Metro 4. Data processing Features: 1. Low insertion Loss and Back reflection loss 2. RJ-45 style interface- 3. Polarized and color coded (TIA568-A&ISO 11801) 4. UL-rated plastic housing and boot 5. Compact, pull-proof design 6. Behind-the-Wall style short connector

Minimum Order: 1000

Description XIAODONG P1 P2 Electric Screwdriver Disassembly Tool With Torque-limited Self- lock Strong Power For iPhone Huawei Android Phones Tablets Opening Repair. Xiaodong P1 Brushless Electric Screwdriver For Huawei Android Phones Tablets Repair. Xiaodong P2 Electric Screwdriver For Apple iPhone Android Phones Tablets Repair. Professional screwdriver used by Huawei after-sales and Apple after-sales repair outlets. Main difference between Xiaodong P1 and P2 electric screwdriver: 1. P1 is designed for Android phones and computers, its power is relatively large, and it's not the best screwdriver to disassemble Apple iPhone. 2. P2 is for Apple iPhone and Android phones, two versions: for Android and for Apple. 3. The charger is the same, and the bits are the same, but the P2 is equipped with fewer bits than the P1, and the motor power inside is different. Xiaodong P2 electric screwdriver features: 1. Xiaodong P2 has two versions, one is specifically for Apple iPhone, and the other is specifically for Android phones and laptops. 2. Xiaodong P2 (iPhone version) with 7pcs replaceable bits, Xiaodong P2 (Android version) with 10pcs replaceable bits torque-limited self-lock and strong power. 3. Wireless and ergonomic design, easy to use and carry. 4. Xiaodong P2 uses a coreless brush motor, long life, silent, accurate torque. 5. P2 screwdriver adopts electronic torque limiting mode (electronic brake), the brake is stable, it is not easy to damage the motherboard and screws, and it has a buzzer prompt sound. 6. High and stable concentricity effectively ensures that the screws do not slip. 7. Built-in 18650 power lithium battery, 2500mAh large capacity, stable charge and discharge, with two-way protection, normal working time can reach 10-15 days. 8. There are three gears to adjust, and the torque of each gear is calibrated one time at the factory, so there is no need to repeat the calibration. 9. OLED screen displays gear and power. 10. There are work lights that can be turned on/off. Xiaodong P1 electric screwdriver features: 1. Xiaodong P1 with 10pcs replaceable bits, torque-limited self-lock and strong power. 2. Wireless and ergonomic design, easy to use and carry. 3. Xiaodong P1 uses a coreless brushless motor, long life (from 10000 hours), silent, accurate torque. 4. P1 screwdriver uses electronic torque limiting (electronic brake), the brake is stable, and it is not easy to damage the motherboard and screws. 5. High and stable concentricity effectively ensures that the screws do not slip. 6. LG21700 lithium battery, 4800mAh large capacity, stable charge and discharge, two-way protection, normal working time up to 15-30 days. 7. There are three gears to adjust, and the torque of each gear is calibrated one time at the factory, so there is no need to repeat the calibration. Xiaodong P1 P2 electric screwdriver uses the same base: 1. Place and fix the P1 P2 electric screwdriver. 2. The bottom surface has non-slip silicone, which is not easy to slide and stable when placed on the desktop. 3. There are built-in magnets on all sides, which can be attached to the removed screws during disassembly, and some commonly used small parts or bits can also be adsorbed on it, which is not easy to lose and easy to find. 4. Place it on the top of the table beautifully and not messy.

Product Description Industrial Auto Battery Chargers for SUVs, Trucks, and Large Engines and Automotive Shop/Dealer Use Product Description: Industrial Battery Chargers are designed to provide a reliable, safe and efficient power source for all types of forklift batteries. We offer a wide range of industrial battery chargers for forklifts, from 1-50A adjustable output current with 12V/ 24V/ 36V/ 48V adaptive output voltage range. Our industrial battery chargers are lightweight, weighing in at only 7-14.5kg, and are equipped with fan cooling (AUTO) to ensure reliable and efficient operation. Our industrial battery chargers are designed with the highest efficiency of >90%. Features: Product Name: Industrial Battery Chargers Ambient Temperature: -20~+50℃ Warranty: 1 Year Charging Mode: Constant Current/Constant Voltage Cooling Method: Fan Cooling (AUTO) Output Voltage Range: 12V/ 24V/ 36V/ 48V(Adaptive) Storage Battery Charger: Yes Industrial Battery Charger: Yes Manual Wheel Charger: Yes Technical Parameters: Parameters Specifications Efficiency >90% Size 280*280*240mm Display LED/LCD Cooling Method Fan Cooling (AUTO) Relative Humidity ≤90% Ambient Temperature -20~+50℃ Control Mode Manual/Automatic Weight 7~14.5KG Output Current 1-50A(Adjusted) Protection Function Short Circuit/Over Current/Over Voltage... Applications: KOMCO's Industrial Battery Chargers, Model No. KO-BTC, are designed for charging and maintaining storage batteries in a wide range of industrial applications. These industrial battery chargers can withstand -20 to +50℃ ambient temperature and are equipped with comprehensive protection functions including short circuit, over current and over voltage protection. The input voltage range is 90-260VAC and the control mode can be manual or automatic. KOMCO's industrial battery chargers are ideal for use in fast charging applications, such as 380V industrial recharging, and are suitable for use as industrial battery chargers in a variety of different industries. With their reliable performance and comprehensive protection functions, KOMCO's industrial battery chargers are the perfect choice for your industrial battery charging needs. Customization: Industrial Battery Chargers Brand Name: KOMCO Model Number: KO-BTC Place of Origin: China Protection Function: Short Circuit/Over Current/Over Voltage Charging Mode: Constant Current/Constant Voltage Warranty: 1 Year Output Voltage Range: 12V/ 24V/ 36V/ 48V (Adaptive) Relative Humidity: ≤90% Special Features: Charger For Mine, 380V Industrial Recharger, 3-phase industrial charger Support and Services: Industrial Battery Chargers Technical Support and Service We provide technical support and service for our industrial battery chargers to ensure that our customers are satisfied with our products and services. Our technical support team is available 24/7 to answer any questions and provide assistance with any issues that may arise. We offer a variety of options including phone support, online chat, and email support. We also provide a wide range of services for our industrial battery chargers, including installation, maintenance, and repair. Our service technicians are highly trained and experienced in all aspects of industrial battery charger technology. If you have any questions or need assistance with our industrial battery chargers, please do not hesitate to contact us. Our team is here to help. Packing and Shipping: Packaging and Shipping of Industrial Battery Chargers Industrial battery chargers are packaged in sturdy cardboard boxes with foam inserts. All packaging materials are recyclable. A packing slip is included in the box with the charger. All chargers are shipped by courier or freight. We provide tracking information for all orders. The customer is responsible for any duties or taxes that may be assessed upon delivery.

Outdoor 200W Solar Street Light Manufacturer With Motion Sensor New Product Led Modul Outdoor 100W 200W Quality 300 Watt At Least 120 Motion Sensor Zhongshan Lighting 200-240 W Street Products Description Shinelux Toolless Street Light WATTAGE 50 100 150 200 SIZ , E 470*135*80 500*240*85 580*175*80 650 , *198*80 LUMEN OUTPUT(LM) 7500 15000 22500 30000 I , P CLASS IP66 MATERIALS ALU+PC+GLASS WORK VOLTAGE AC85-265V LED MODEL SMD 3030 EFFCIENCY(LM/W) 150 BEAM ANGLE 70*140° Outdoor 200W Solar Street Light Manufacturer With Motion Sensor 0 Outdoor 200W Solar Street Light Manufacturer With Motion Sensor 1 Outdoor 200W Solar Street Light Manufacturer With Motion Sensor 2 Outdoor 200W Solar Street Light Manufacturer With Motion Sensor 3 Outdoor 200W Solar Street Light Manufacturer With Motion Sensor 4 Outdoor 200W Solar Street Light Manufacturer With Motion Sensor 5 Company Profile Outdoor 200W Solar Street Light Manufacturer With Motion Sensor 6 Outdoor 200W Solar Street Light Manufacturer With Motion Sensor 7

ER-TS-32600-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.01°, resolution 0.002°; 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-32600-Modbus High Performance Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: double axis ±90°, single axis 180° (360° optional) Accuracy: 0.01°, resolution: 0.002° Volume (94*74*64mm) (customizable) Ultra low power consumption Built in rechargeable lithium battery for power supply Wide temperature operation -40~+85℃ IP67 protection grade Applications Billboard monitoring Bridge construction PTZ levelling Ship navigation attitude measurement High speed railway subgrade tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery

1. The module has temperature and voltage sensor pre-welded with wiring to the BMS, connection with BMS is "plug and play"  type;  2. The module is of standard design and mature manufacture which has 40K electric vehicle application experience;  3. It's universial to all BMS, not limited to  BMS types;  4. It's flexible in configuration, 12 Pcs cell could be 12.8V 19.2V or 38.4V;  5. The module could be used on electric bus/truck/utility vehicles, light vehicle, Golf car and forklifts without lead pollution. 

Minimum Order: 200

Rechargeable Lithium Battery Pack 12v 20ah Lithium-Ion Battery Lithium 18650 Pack For Solar Power System/LED Panel Light Specifications: Voltage 12V Capacity 20000mAh,Can be customized Battery Type Li-Ion Battery Composed Type Series And Parallel Certification CE,ROHS,FCC,IEC,UN38.3,MSDS Max continuous Charge/discharge current 3A (Adjustable) Charger Included 2A charger US plug/EU plug/UK plug Protection 12VPCM,over-charge/discharge protection, over-heat protection Recharge cycle More than 500 times LED Indicator Available ON/OFF Switch Available Operating temperature -20 °C to 60 °C Charge temperature -0 °C to 45 °C Storage temperature -20 °C to 45 °C Operating humidity 5% to 90%,non-condensing Aplications: ◆ LED Strip/Panel/Light/Lamps. ◆ Camera/IP Camera. ◆ Car Camera Recorder/Monitoring Equipment. ◆ Router/Switch/Instrumentation. ◆ POS Machine. ◆ Solar Energy Storage. ◆ Speaker/Toy/Sprayers/Car Washes Etc. FQA: Q1. Can I have a sample order? A. Yes, we welcome sample order to test and check quality. Q2. What about the lead time? A. Sample needs 3 days, mass production time needs 5-7 weeks, it depends on order quantity. Q3. Do you have any MOQ limit? A. Yes, we have MOQ for mass production, it depends on the different part numbers. 1~10pcs sample order is available. Low MOQ, 1pc for sample checking is available. Q4. How do you ship the goods and how long does it take to arrive? A. It usually takes 5-7 days to arrive. Airline and sea shipping is also optional. Q5. How to proceed with an order? A. Firstly let us know your requirements or application. Secondly, We quote according to your requirements or our suggestions.Thirdly customer confirms the samples and places a deposit for formal order. Fourthly We arrange the production. 12V 20Ah Rechargeable Lithium Battery Pack 18650 For Solar Power System LED Panel Light 0

10 Brightness Eye-Caring & 3 Color Temperature LED Ligh Desk Lamp with Clamp suitable for Reading/Rework/Soldering Table Desk Lamp, Eye protection foldable desk lamp for Home Office and phone repairing.

Minimum Order: 1 bags

● Fresh Grade A battery cell ● High energy density,170-180Wh/kg ● Long cycle life, more than 4000 cycles @1C/1C, 100% DOD,80%SOC ● Full sets of certificates available, ISO 14000, TS16949, ROHS, TUV, UL, UN. ● Product liability insurance covered. --   5 years full warranty； Cells under liability insurance --   Warehouse in Germany and intime replacing service； --   Cells are all under product liablity insurance and 100% risk free for partner. --  10GWH capacity and perfect price to performance Ratio; --   Professional sales and technical support 7/24 service；

Electronic IC Chip AD8184 Video Switch IC AD8184ARZ 1 Channel 700MHz 14-SOIC Applications For Video PRODUCT DESCRIPTION Part number AD8184ARZ is manufactured by TI Technologies and distributed by Stjk. As one of the leading distributors of electronic products, we carry many electronic components from the world's top manufacturers. For more information on AD8184ARZ detailed specifications, quotations, lead times, payment terms and more, please do not hesitate to contact us. In order to process your enquiry, please add the quantity AD8184ARZ to your message. Send an email to stjkelec@hotmail.com for a quote now. Product Status Active Applications Video Multiplexer/Demultiplexer Circuit 4:1 Switch Circuit - Number of Channels 1 On-State Resistance (Max) - Voltage - Supply, Single (V+) - Voltage - Supply, Dual (V±) ±4V ~ 6V -3db Bandwidth 700MHz Features Buffered Operating Temperature -40°C ~ 85°C (TA) Mounting Type Surface Mount Package / Case 14-SOIC (0.154", 3.90mm Width) Supplier Device Package 14-SOIC Base Product Number AD8184 AD8184 Video Switch Electronic IC Chip AD8184ARZ 1 Channel 700MHz 14-SOIC 0 AD8184 Video Switch Electronic IC Chip AD8184ARZ 1 Channel 700MHz 14-SOIC 1 AD8184 Video Switch Electronic IC Chip AD8184ARZ 1 Channel 700MHz 14-SOIC 2 AD8184 Video Switch Electronic IC Chip AD8184ARZ 1 Channel 700MHz 14-SOIC 3

Product Description Second Hand 6 Axis Yaskawa Robot UP6 Working Range 1373mm Payload 6kg Yaskawa YASKAWA-UP6 is a small industrial robot with a load of 6kg. It was produced and launched by Japan Yaskawa Shougang Robot Company in 2001-2003. It is mainly used in arc welding, packaging and other fields. Yaskawa UP6 has the following characteristics. 1. Takt time shortened Yaskawa UP6's new compact wrist is equipped with a powerful motor, which can move quickly and reliably without getting in the way of the swinging cable, and maintain the speed at all times. 2. Excellent welding quality Arc welding applications have increasing requirements for high quality and consistent quality, which requires improved wire feeding control near the arc to ensure high-volume production. As an arc welding robot, Yaskawa UP6 has a stronger and stronger upper arm with a load of 6kg, which can handle heavier welding torches. The repeating path accuracy can reach 0.06mm, presenting a satisfactory welding effect. 3. High reliability Fast, agile and reliable loading and unloading The Yaskawa UP6 robot can move with large acceleration and speed without damaging other parts, so the compact hollow wrist can move quickly and reliably, while also eliminating the risk of collision in a confined space. Brand Yaskawa Installation method floor, upside down Body weight 130kg Repeatability ±0.06mm Working range 1373mm Model UP6 Payload 6kg Place of Origin Japan Condition Used Yaskawa Robot Application fields welding, cutting, loading and unloading, handling, etc. Second Hand 6 Axis Yaskawa Robot UP6 Working Range 1373mm Payload 6kg 0 Second Hand 6 Axis Yaskawa Robot UP6 Working Range 1373mm Payload 6kg 1

Introduction ER-TS-22800 protocol is a wireless tilt sensor with ultra-low power consumption, small size and high accuracy, for users without power supply conditions or real-time dynamic measurement of object attitude Angle industry applications. Powered by lithium battery, based on the Internet of Things technology Bluetooth, Zigbee (optional) wireless transmission technology, the use of industrial-grade MCU, triple-proof PCB boards, imported cables, wide- temperature metal shell and other measures to improve the product’s industrial level, good long-term stability and zero drift small, Low power sleep mode can be automatically entered, thus getting rid of the dependence on the use environment. Compact product structure, precision design, for temperature and linearity compensation again, Integrated with short circuit, instant high pressure, polarity, surge and other comprehensive protection functions, simple and easy to use, and wireless digital signal transmission mode eliminates the tedious wiring brought by long cable transmission, noise interference; Industrial-grade design has extremely high measurement accuracy and anti-interference ability, wireless sensor nodes can form huge wireless networks, supporting thousands of monitoring points for simultaneous inclination monitoring, supporting the professional computer software, no need for field survey, real-time data measurement and record the state of the measured object; Suitable for the industrial site, old dilapidated houses, ancient buildings, civil engineering, various tower tilt deformation remote real-time monitoring and analysis of the needs of the safety monitoring system. Product property Biaxial monitoring (uniaxial optional) Measurement Range: ± 30° Accuracy: 0.005°, resolution: 0.0008° Volume (94*74*64mm) (customizable) Ultra-low power consumption Built-in rechargeable lithium battery power supply Wide temperature work:-40~+ 85℃ IP67, protection level Product application Billboard monitoring Bridge construction Cloud platform levelling Ship attitude measurement High Speed Rail Roadbed Tunnel Monitoring Satellite solar antenna positioning Medical equipment Various engineering machinery angle control

JCID rear camera tag-on repair FPC flex cable works with JCID 13-14 Rear Camera Radar Read Write Adaptor and JCID wide angle camera module for iPhone 12-14 Pro Max rear camera repair, which solves iPhone rear camera code matching and pop-up issues caused by non-genuine iPhone rear cameras. JCID Tag-on Rear Camera Repair Flex Cable disassembly-free cable fixes iPhone camera without soldering.

Minimum Order: 1 bags

JCID Romeo2 15 Series Face ID Chip For iPhone 15/15 Plus/15 Pro/15 Pro Max Face ID Repair. JCID Romeo Dot Matrix Integrated Chip Solves iPhone X 11 12 13 14 15 series Face ID problem. JCID Romeo2 Dot Matrix For iPhone 13-15 Pro Max. JCID Romeo Face ID Chip For iPhone X-12 Pro Max iPad Pro 3/4 Dot Matrix repair. JCID Romeo Face ID Chip Built-in with tin balls, installed directly, no need to short- circuit the MOSFET manually.