Consumer Electronics - Others

Constant temperature QUICK 936 60W soldering station, QUICK 936 electronic soldering iron for mobile phone repair, the iPhone 7 7 plus fingerprint repair soldering station. 60W QUICK 936 for SMD soldering station with adjusted temperature setting. QUICK 936 BGA rework station is specialized in phone repair Features: 1. Temperature range:392°-896°F (200°C- 480°C) 2. Adjustable temperature control 3. Imported ceramic heating No 1321 element and senor insures rapid heat-up temperature and lightning-fast thermal recovery 4. Celsius or Fahrenheit temperature setting 5. Temperature adjusted by simply turning the dial 6. Slender iron handles are insulated and ergonomic-designed for ease and comfort 7. Wide selection of tips available for soldering SMD and through-hole connections Parameters: Powe supply: 220V-240V (50Hz-60HZ) Power consumption: 60W Temp. control range: 200-480°C Voltage output: AC 24V Ground resistance: 2ohm Size: 120*90*170mm

Minimum Order: 1 bags

HAKKO FX-888D is ESD Safe LED display Digital Soldering Station, 220V or 110V input voltage Hakko FX-888D Soldering Station for phone motherboard Soldering repair, OEM Adjustable Temperature FX-888D ESD lead free digital soldering station Option voltage: 220V or 110V Note: 110V, need customized, time: about 1-2 days 70W mains powered soldering iron that allows you to get soldering by simply plugging the iron in Heats up in 23 seconds to allow you to begin soldering almost right away Selectable temperature from 50°C to 480°C, ensuring that your solder can be melted without excessive heat damaging the components you are soldering Mains powered to give you the freedom to solder for as long as you like LED display to allowing you to set and monitor the temperature of your soldering iron ESD Safe:The adjustment and presentable modes ensure you can set the temperature to what you desire and then you can lock it with a password to protect your settings. The wattage of a soldering iron is one of the most important factors when deciding which one to buy. Higher wattage will deliver more heat to the iron’s tip, allowing it to heat up quicker. As this is a 70W mains solder station, it heats up the tip in under 20 seconds to a selected temperature, allowing you to start soldering without having to refill butane tanks or replace batteries. Simply unpack this soldering iron and connect it to a mains socket. In under a minute, it should have warmed up to temperature and be ready for use. Application Lead free soldering Soldering for PTH/SMT component Model: FX-888D Main body color: Blue & yellow Power Consumption: 70W Temperature range: 200 to 480 ℃ Temperature stability: +/- 1℃

Minimum Order: 1 bags

T12-D Constant Temperature Electric Soldering Station with LED digital display, 110V-230V 72W 951 Soldering Iron Welding Tool with 3pcs iron tip, Improvement T12-D Constant Temperature Lead-free Soldering Station for mobile phone PCB Welding Repair. Auto sleep, Auto standby, 5 seconds for heating, Immersion tin in 6 seconds, Fast back temperature Enhance temperature in One-button, Adjustable sleep time, Adjustable standby time Voltage range: 110V-230V Power: 72W Temperature range: 150-450°C Strengthen with one click : 530°C Improvement 951 Thermostat soldering station new SFDER T12-D Five advantages on SFD T12-D soldering iron heat core 1. Compared with ordinary iron tip plating for 10 hours , our soldering iron is electroplated for more than 30 hours！ 2. Ordinary soldering iron head adopt domestic heating core, while our soldering iron head use imported heating core! 3. Ordinary soldering iron tip without any code, but our soldering iron tip uses a unique code, you can trace to the source! 4. When ordinary tip heated above 350 degrees, of which the temperature will jump for at least five minutes, and it will continue to jump when the temperature reaches 500 degrees or more. While our soldering iron tip won't jump and can be used directly! 5. The heat transfer of soldering iron head is high, and temperature of the iron tip is accurate. Difference of actual display temperature is not more than 2 degrees

Minimum Order: 1 bags

Jabe UD-1200 lead-free soldering station is a welding tool for precision electroni applications, with exclusive heating system, 2.5S Rapid Heating and the intelligent sleep, Jabe UD-1200 Precision Soldering Station for mobile phone PCB welding tool. Features: Model: UD-1200 Power Consumption: 130W Input Voltage: 110V / 220V Output Voltage: 16V+16V Range of Temperature: Decide by working mode(50℃-520℃) Max Ambient Temperature: 40℃ Temperature Stability: ±2℃/Without air flow and no load Tip to Ground Resistance: <2Ω(DC) Tip to Ground Potential: <2mV(True RMS)

Minimum Order: 1 bags

TBK 968D 19Inch LCD Separator Heating Vacuum Mobile Phone Tablet Laptop OCA Display Screen Repair Machine Details: 1. 19 inch vacuum pump built-in separator 2. Built-in vacuum pump OCA lcd separator machine Parameter: The maximum temperature that can be set for this machine is 220°C, and the temperature used by the separate screen is 80°C-120°C Feature: 2 in 1 vacuum lcd separator, with two modes of plate separation and mobile phone separation; 19-inch super large separation table, which can support 99% of the mobile phones and tablets on the market; The heating table can set the temperature by yourself,and the separation effect is good Package: 1 X LCD Separator Machine 1 X Power Cable

Minimum Order: 1 bags

TBK-968 2 In 1 Vacuum LCD Separator Machine Hot Plate Automatic Touch Screen Separator Repair for Tablet Mobile Features: Strong reinforced air pump, built-in USB charge port. 1. Just put on LCD on the heating panel, turn on "start" switch, then you can separate the glass, and the LCD is firmly fixed on the panel while separating. 2. The shell of vacuum LCD separator is metal, it's better than back light vacuum LCD separator. 3. The vacuum LCD separator equip with four bearings, it's more convenient when separating. 4. The surface of heating plate is very smooth, it makes fix broken LCD firmly. 5. The LCD separator equip with anti-slip mounting seats, makes your work smoothly and decreases the opportunity of damaging LCD assembly. 6. This machine set can help separate the cell phone's touch screen from LCD, or touch screen from front glass lens.

Minimum Order: 1 bags

TBK-988C LCD screen separator for 7 inch LCD display screen(straight screen and curved screen). TBK 988C LCD screen separator with built-in double large vacuum pump, super suction, super heating core, 360 degree free rotation for straight screen and curved screen separating repair. TBK 988C Built-in Double Vacuum Pumps Flat Edge LCD Touch Screen rotary Separator Machine Max 7 inches with Glue Clean Remove Middle Frame Clamp. Features: 1. Smart thermostat. 2. One-button start, 3. Tilt left and right. 4. vacuum break button. 5. 360 rotating fixture. 6. Mobile Phone fixed adjustment. 7. Necessary for mobile phone repair shops. 8. Can be rotated, strong suction with double pumps, 9. Accurate temperature ,no damage to the screen. 10. Maximum temperature 350. 11. Curved screen degumming, straight screen separator, use temperature 80 degrees, pull the wire to separate the screen. 12. Edge screen in frame cleaning OCA , separating glass. How to use it: 1. Just put on LCD on the heating panel, turn on "Vacuum Pump" switch, then you can separate the glass. And the LCD is firmly fixed on the panel while separating. 2. The LCD Screen Separator is used for separating glass lens, touch screen and LCD display assembly for Apple, Samsung, HTC as well as other cell phones. If you need mouds or other accessories for iPhone 4, iPhone 5, Samsung Galaxy S3, S4, N7100. Please contact us before you place order. Notice: 1. Like the current main stream cell phones, Apple, Samsung and HTC, many new cell phones are made of display assembly. Since glass lens, touch screen and LCD are connected together, it is hard to separate cracked or broken screen by hand if happened. Always you have to take it to Depot for repairing. 2. The cost is high and the time is long. Or you need purchase expensive equipment package, including separate machines, SMT machines, laminating machine and bubble removing machine. 3. But now you can handle it easily. We have developed the machine and skills, it is unnecessary to buy expensive equipment and wide space for general repair shops. After mastering the skills, you can replace an old screen within 3 minutes and it looks like a new one.

Minimum Order: 1 bags

TBK 988N 7 Inch Built-in Double Vacuum Pumps Flat Screen LCD Separating Machine For iPhone 8G 7Plus OCA Display Repair TBK-988N Flat Phone Screen Separator Curved Screen Glue Remover for edge Glue Clean Holder heater plate spiral rotate stage Feature: 1. Built in vacuum pump OCA lcd separator 2. 7 inch LCD separation table, which can support 99% of the mobile phones lcd repair on the market ; 3. For flat screen lcd separating ; 4. Easy to separate the screen 5. The heating table can set the temperature by yourself,and the separation effect is good.

Minimum Order: 1 bags

TBK-508A Intelligent Curved Screen Laminating And Defoaming all-in-one Tablet Large-Size OCA Vacuum Laminating Machine With Moulds For Samsung iPhone iPad Touch Screen Refurbish. Feature: 1. Universal laminating machine with touch screen,for flat curved tablet screens LCD. 2. Curved moulds use short base,save space maxly,abandon high foot case design completely. 3. Big pressure,laminate & debubble can work in same time.

Minimum Order: 1 bags

JBC CD-2SHE Precision Soldering station works with the JBC exclusive heating system and the intelligent sleep & hibernation, over 20 parameters to help manage the soldering process, Professional-grade and Precision Purpose Soldering Station for Mobile Phone Motherboard Repair. Original CD-S Precision Soldering station: JBC CD-S soldering station with the JBC Advanced system for general electronic applications. It works with the JBC exclusive heating system and the intelligent sleep & hibernation features. Using the menu you can personalize over 20 parameters to help manage the soldering process. It features a USB connector to update software, create graphs and manage parameters from a PC. Complete cleaning system with an antisplash membrane to keep the work area clean. Use the integrated wiper to remove excess solder from the tip. Use T210 series handle, with C210 series iron head for precision welding Power 40W. Can be used 300 degrees low temperature welding You can use the USB-B type data cable to connect the computer to observe the temperature curve. 2 seconds to 350 degrees Up to 20 sets of parameters can be set using the menu Unique sleep + sleep function can extend the life of the tip 5 times User-friendly handle control, very comfortable to use the feel Specifications Ambient operating temp: 10-40 C / 50-104 F Output Peak Power: 130W / 23.5V Package dimensions: 234 x 234 x 258 mm Package weight: 4 kg Size: 150 x 175 x 145 mm Temperature selection: 90-450 C / 190-840 F Tip to ground resistance: <2 ohms Tip to ground voltage: <2mV RMS Voltage: 220V or 110V Weight: 3.15 kg

Minimum Order: 1 bags

QUICK TS1200A is the intelligent lead free Lcd touch soldering station. 120W TS1200A anti-static soldering iron soldering station for cell phone circuit board repairing. Touch operation, intelligent, lead free, digital led display, 120W intelligent soldering station for mobile phone BGA desoldering repairing. Features: Touch operation, intelligent, lead free, digital led display Temperature Stability: Adjustable ±2℃ Tip to Ground Potential: <2Ω Tip to Ground Resistance: <2mV Input Voltage: 110V / 220V Output Power: 120W Temperature Displaying Type: TFT Output Temperature: 200℃ - 420℃ Temperature Range: 200℃ - 420℃ / 392F - 780F Ambient Temperature: 40℃ Product Dimensions: 137*168*114mm

Minimum Order: 1 bags

Hakko FX-951 Soldering iron is the Professional soldering station, HAKKO FX- 951 featuring a standard-model soldering iron which ensures the high thermal recovery needed for lead-free soldering, FX-951 Soldering Iron Station + 1pcs T12-k Iron Tips Features : Complex tip design, heater and nozzle merge together. 70W power consumption, strong heat recovery. Temperature control by card to avoid random temperature change. Temperature correction function, temperature correction input is more accurate. Over low temperature alarm. Option Hardware design: 1: Original HAKKO FX-951 2: OEM FX-951- china factory Option Input voltage: 220V or 110V Note: 110V, need Customized, time: about 1-2 days Output Power : 70W Temperature Stability : +/- 5 centidegree Output Temperature : 200 - 450 centidegree All-in-one complex tip design (70W heater, sensor tip) has strong heat recovery for lead free soldering. Temperature control by card avoid random temperature change. Temperature correction function, temperature correction input is more accurate.

Minimum Order: 1 bags

Bakon BK950D Soldering Iron is the Internal Heating Type Welding Tool, option AC 110V 220V digital display Soldering Iron, Bakon BK950D Welding Tool features with trinity digital display and T12 welding head, Bakon BK950D is used for mobile phone motherboard, PCB equipment and other craft projects Model: BK950D Power: 50W Voltage (V): 220V / 110V Uses Trinity digital display. Split design, easy to replace. Handle design, lightweight, prolonged use without fatigue. Heater-stream design, reasonable structure, easy to replace. Metal handle plug allow you to use more conveniently. Imported silicone handles, high temperature materials, soft wire, feel good. It does not require specialized knowledge; the general staff can replace its heater. Creative iron frame, easier to use. With additional cleaning sponge.

Minimum Order: 1 bags

PHONEFIX 939 Electronic Soldering Station With 6PcsTips, Adjustable temperature LED display ESD safe Soldering Station, precision real temperature, Using high quality heating element-long life heating. Specifications Model: PHONEFIX 939 Input Voltage: 220V / 110V Output Voltage: AC 24V Temperature Range: 200-480℃ (392-896℉) Dimensions: 110 x 80 x 140mm (station only) Weight: 1600g Soldering Iron Power Consumption: AC 24V @ 60W Cord Length: 1.2m Length: 170mm W heat the soldering iron up in a few minutes, PHONEFIX 939 Soldering Station is convenient to use. As a common tool for electronic assembly, it has been widely used in household appliance repairing, IC and chip experiments, etc. It’s a necessity for open source hobbyists on DIY projects. With anti- static ability, the soldering station can be used with soldering iron and the operation is quite simple.

Minimum Order: 1 bags