Consumer Electronics - Others

IGOL DS1104Z Plus 4 Channels 100 MHz Digital Storage Oscilloscope with 1 GSa/sec Sampling + 25 MHz 2 Channel Signal Source (Function Generator) Product Features : 100 MHz Digital Oscilloscope with 4 channels and 25 MHz 2 channel integrated source plus 12 Mpt memory and 1 GSa/sec sampling 4 Channels, 100 MHz Bandwidth scope + 25 MHz 2 channel Signal Source (function generator) UltraVision: Deeper memory(Std.12Mpts,Opt.24Mpts) UltraVision: Up to 30,000 wfms/s Waveform capture rate UltraVision: Multi-Level intensity grading display (100V-240V) The Rigol DS1104Z Plus is a very high quality 4 channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s and a bandwidth of 100 MHz. The Rigol oscilloscopes are equipped with well designed and easy to use controls offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages. This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1104Z Plus has a refresh rate of up to 30.000 wfms/ enabling users to capture instantaneous signals, as well as abnormal signals more quickly. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes. The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display. Special Features : Large Display for 4 Channels It is possible to display all four channels on the large display with 17.8 cm (7") diameter and a resolution of 800 × 480 pixel without any problems. Deeper Memory The Rigol DS1000Z oscilloscopes can store up to 12 million measurement points. You can zoom into a selected part of the captured waveforms to get more details and scroll within the measurement points. With the optional memory module MEM-DS1000Z even 24 million data points are available. The memory expansion module "MEM-DS1000Z" is available on this page under the "accessories? tab. Fast Capturing The high sampling rate (up to 1 GSa/s) of the Rigol DS1000Z Oscilloscopes and the large memory makes it possible to record up to 30,000 waveforms per second. Real-time waveform record, replay, analysis (option) With the optional recorder module DS1000Z-REC the recorded waveforms can be conveniently recorded, displayed and analyzed. The recorder module "DS1000Z-REC" is available on this page under the "accessories" tab. Multi-Level Intensity Grading Display "Multi-Level Grading Intensity" display, extensive signal characteristics with a very large number of measurement values can also be displayed completely. Extensive Trigger Options The Rigol oscilloscopes offer extensive trigger options for a professional use. The special triggers Windows, Nth Edge, Delay, Timeout, Runt, RS232/UART, I²C und SPI are available as option as "AT-DS1000Z Advanced Trigger" module on this page under the "accessories? tab. Serial bus decoding function (option) With the optional "SA-DS1000Z Decoding Kit" serial data packages of different serial bus systems can be analyzed, decoded, and displayed directly as byte values. Supported protocols are: RS232/UART, I²C, and SPI. The serial decoding module "SA-DS1000Z" is available on this page under the "accessories" tab. Advanced Math The DS1000Z series oscilloscopes comes with a modern and advanced math system which lets it solve complicated signal calculations quite simply with predefined formulas. Masked Pass/Fail-Tests Pass/fail testing can be used for troubleshooting in various environments like communication networks. Auto measurements with statistics The oscilloscope measures up to five parameters like rise- and fall-time, amplitude, pulse width, duty cycle and many more simultaneously and shows statistics for every parameter (max- , min- and average values). Package includes : 1pc x Rigol DS1054Z digital oscilloscope 2pcs x Probes 1pc x USB Cable 1pc x Power cord 1pc x Quick start (user manual)

Minimum Order: 1 bags

FNIRSI-1014D Digital Oscilloscope 2 In 1 Dual Channel Input Signal Generator 100MHz* 2 Ana-log Bandwidth 1GSa/s Sampling Rate. FNIRSI 1014D 100MHz Two Channels 1gsa/s Oscilloscope. Features: 1. Built in DDS signal generator, support 12 kinds of function signal. 2. Capture output signal function, which can store up to 1000 capture signals. 3. Targeted high intelligent decoding algorithm, the encoderlifeis infinite, and intelligent anti-burn function, 1X Can withstand up to 400V withstand voltage. 4. With 100MHz * 2 ana-log bandwidth and @ 1GSa/s sampling rate（1X = 5MHz, 10X = 100MHz). 5. Fully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast. 6. High measurement voltage range: 1X can measure 0~40 V, 10X can measure 0~400V. 7. Up to 12 parameters measurement：VPP，VP，Vmax，Vmin，Vavg，Vrms , ， Frequent，Duty+，Duty-，Time+，Time-， , Period. 8. Cursor measurement function: it is convenient to manually measure the period and frequency and voltage. 9. Complete triggering function (single, normal, automatic), and at any time, the waveform display (pause function) is frozen. 10. Equipped with high efficiency One-button AUTO, and one-button waveform storage and screenshot function. 11. Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data. 12. Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc. 13. Equipped with a USB interface, which can be connected to a com-puter to share its screenshots with the com-puter, which is convenient for secondary analysis. 14. Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals. 15. FFT display function, can analyze the spectral characteristics of the signal, memory compression technology, waveform refresh screen does not flicker. 16. With the screen brightness adjustment function and background gr-id brightness adjustment function, also easy to carry. Introduction: FNIRSI-1014D is a two in one oscilloscope and signal generator launched by FNIRSI. It has comprehensive functions and high practicability. It is a cost-effective dual channel desktop oscilloscope for the maintenance industry and R & D industry. The oscilloscope has a real-time sampling rate of 1GSa / s and 100MHz* 2 analog bandwidth; complete trigger function (single time / normal / automatic), both for periodic analog signal and aperiodic digital signal can be used freely; built in DDS function signal generator and the industry's original chopping output (@ 2.5vpp), all signal frequency step is 1Hz, support 14 kinds of standard function signal and a customizable chopping signal, chopping The output device intercepts part or the whole part of the complex signals measured by the oscilloscope as the output signal of the signal generator, which can store up to 1000 customized cut-off signals; the built-in high-voltage protection module can tolerate up to 400V continuous voltage, without worrying about the oscilloscope burning accident caused by the probe not moving to 10x gear. Large time base scrolling mode, which can monitor slow level changes; equipped with efficient one button auto, which can display the measured waveform without tedious adjustment; display high-definition LCD with 7- inch 800 * 480 resolution; cursor measurement function, when manually reading amplitude and frequency parameters, it does not need to read the background scale unit and quantity, and it does not need to convert to directly get peak to peak and frequency Extremely convenient screen capture and waveform storage function, built-in 1GB storage space, can store up to 1000 screen capture pictures + 1000 groups of waveform data, the storage process is simple and fast, save the current waveform with only one click, no cumbersome prompts and choices to save the current data, very convenient; powerful waveform image manager, support thumbnail browsing, view, view details The functions of page turning, deleting and waveform enlarging, reducing and moving are convenient for secondary analysis. The fuselage is equipped with USB interface, which can be connected with the computer to realize the sharing of its own screen capture pictures and the computer, which is convenient for secondary analysis; Li Shayu's graphic display function can be used to compare and judge the amplitude, frequency and phase of two groups of signals; FFT viewing function can estimate the harmonic component of signals; Li Shayu's graphic display function can be used to compare and judge the amplitude, frequency and phase of two groups of signals.

Minimum Order: 1 bags

TL-15B 2 In 1 Universal adjustable LCD screen fastening clamp battery repair motherboard metal positioning and dismantling fixture for phone tablet screen dismantling and maintenance disassembly fixture. Features: The flat plate can also be disassembled, regardless of size. The suction cup can be freely adjusted back and forth, with uniform force, which makes it easier to absorb, safe, stable and reliable. Vacuum absorption, strong suction, made of environment-friendly PVC plastic, can be used for many times without deformation, and improve work efficiency. Various models and sizes are universal, and can support 12.9 inches at most. Efficient maintenance is more convenient, with strong suction, fixed screen, main-board inspection and maintenance, which can be used as a mobile phone bracket for convenient and fast battery removal. There is a silicone pad at the bottom to prevent scratching. Applicable For Multiple Modes: iPhone: iPhone 5-14 Pro Max Huawei Phone: P series/Mate series/nova series/enjoy series/G series/D series/y series Samsung Phone: Galazy Z/Galazy S/ Galazy A/Samsung W Other Android Phones: Lenovo/ Dowei/Xiaomi/Meizu/LeTV/8848/James/ ZTE/OPPO/VIVO/Gionee/Coolpad/Hammer/TCL/Nokia/ , Motorola/OnePlus/Nubia The Tablet Size Includes: 7 Inches/7.9 Inches/8 Inches/8.4 Inches/9.7 Inches/10 Inches/10.1 Inches /10.8 Inches 11 Inches/12.9 Inches

Minimum Order: 1 bags

OSS T12-X Soldering Station with soldering iron for Phone repair, T12 Soldering Station welding tool. Intelligent constant temperature professional soldering station. Parameter: Model: T12-X Voltage range: 90V-230V Power: 72W Temperature range: 150 ℃ -480 ℃ Temperature improvement: 50 ℃ Automatic standby: yes Features: - Quick temperature recovery, - Enhance temperature with one click, - Auto sleep, auto standby - Three preset temperatures

Minimum Order: 1 bags

T12-D Constant Temperature Electric Soldering Station with LED digital display, 110V-230V 72W 951 Soldering Iron Welding Tool with 3pcs iron tip, Improvement T12-D Constant Temperature Lead-free Soldering Station for mobile phone PCB Welding Repair. Auto sleep, Auto standby, 5 seconds for heating, Immersion tin in 6 seconds, Fast back temperature Enhance temperature in One-button, Adjustable sleep time, Adjustable standby time Five advantages on SFD T12-D soldering iron heat core 1. Compared with ordinary iron tip plating for 10 hours , our soldering iron is electroplated for more than 30 hours！ 2. Ordinary soldering iron head adopt domestic heating core, while our soldering iron head use imported heating core! 3. Ordinary soldering iron tip without any code, but our soldering iron tip uses a unique code, you can trace to the source! 4. When ordinary tip heated above 350 degrees, of which the temperature will jump for at least five minutes, and it will continue to jump when the temperature reaches 500 degrees or more. While our soldering iron tip won't jump and can be used directly! 5. The heat transfer of soldering iron head is high, and temperature of the iron tip is accurate. Difference of actual display temperature is not more than 2 degrees

Minimum Order: 1 bags

YIHUA 1000B / 1000A 3-IN-1 Infrared BGA Rework Station: SMD Hot Air Gun + 540W Preheating Station + 75W Soldering Irons, YIHUA 1000B personal BGA rework station 3 in 1 SMD Hot Air Gun+75W Soldering Irons+540W Preheating Station. YIHUA 1000B Soldering rework station: powerful electronics repairing machine for all kinds motherboard / repair, YIHUA 1000B 3-IN-1 Infrared BGA Rework Station for Personal Repair Shop: motherboard / laptop / mobile phone motherboard repair Feature: 1. Using the new SAMSUNG microcomputer processor PID programmable temperature control technology and uses an infrared source and optics to target heat to individual components without dislodging other SMT parts by way of eddies air currents. 2. Adopt infrared weld technology which independent exploration , infrared penetration strength , components uniform heating , beyond the traditional hot air heating vowed to prevent blow off the IC surrounding small components. 3. Technician focused infrared heat is easy to target most component removal/replacement and re-work. 4. Infrared heat source bulbs are long-lived , un-expensive and easily replaced. 5. Has bright delicate , low voltage LED lighting , safety and energy conservation. 6. It has External Sensor Temperature control mode , that is detected by the sensor IC surface temperature control temperature , this function is good for freshman operation , it’s safe way protect components . 7. MountTechnology (SMT) components 15-35cm in size. 8. This machine has 540W heating system , widely to 120mm*120mm. 9. Preheating plate color is black , from the photics point of view , black color easy to absorb heating , shorten the warm-up time. 10. Powerful human function design , with the following functions A. Temperature correction function Correction of temperature range -50°C~+50 °C ( Infrared lamp analog value 580 ). B. Celsius / Fahrenheit temperature display function 11. This machine also has soldering iron function , if you have the device , you can used for all of the components solder , desoldering , preheating , repair all components , especially Micro BGA components.

Minimum Order: 1 bags

1600W JDI 863 BGA Digital Rework Station for mobile phones repair, JDI 863 Hot Air Gun rework station for phone motherboard repair, cell phone repairing BGA soldering rework station. Features : This hot air rework station uses heating device to warm up air which can be used to weld. There are three working channels CH1, CH2, and CH3, and the air volume and temperature of each channel can be set. Equipped with magnetic sensor, as long as holding the handle, the machine can quickly work. With auto sleep function, can set up while sleep status. Warming up quickly, accurate and stable temperature control, make it real lead-free welding. Using frequency conversion blower, which has adjustable, large range air flow, can achieve a variety of purposes.

Minimum Order: 1 bags

YIHUA 8509 Micro Hot Air Gun Soldering Station with 3.5/3/2.5/2 mm Nozzle Temperature Adjustable SMD Rework Station Welding Tools. Feature: 1: Unique micro nozzles: 4mm nozzles ,3.5mm nozzle, 3mm nozzle, 2.5mm nozzle, 2mm nozzle, 1.5mm nozzle 2: Low noise design: When in max air volume, the noise from detector is less than 60DB, similar to normal indoor conversation sound. 3: Automatically cool-down function: In automatic mode, temperature will cool down to 100℃ when hot air handle is put in the holder because holder is equipped with an automatic sensor. When in manual mode,this automatic function will be stopped. 4: Rotatable display screen.It is convenient to adjust the display screen position via slight press 5. ℃ and ℉ conversion function. 6. Temperature correction funtion. 7.Air gun auto. And manual conversion function Attention： Please remove the screw at the bottom before use

Minimum Order: 1 bags

M-Triangel PG Pro/PG Pro+ back glass laser machine with built-in smoke absorber fume extraction system and LCD display screen for iPhone 8-14 Pro Max back housing glass removing. M-Triangel PG Pro 8W laser machine. M- Triangel PG Pro Plus PG POWER+ 20W laser machine. M-Triangel PG Pro/PG POWER+ Auto-focus Engraving Laser Machine for Mobile Phone back housing cover glass separating removal. Features: 1. M-Triangel PG Pro laser power: 8W; 2. M-Triangel PG Pro+ POWER+ laser power: 20W 3. The latest laser machine, high safety, and environmental protection coefficient, built-in air cooling, and built-in smoking function. 4. With a large screen, M-Triangel PG Pro/ Pro+ features the WiFi, visual auto-focus fuction and built-in air filter. 5. High-quality fiber laser source, long working life. 6. Built-in computer and comes with laser software, easy to set up 7. Support for back glass separation: iPhone 8- 14 Pro Max 8. LCD middle frame separation: iPhone, Samsung, Xiaomi, Huawei, LG, OnePlus, VIVO, OPPO, etc. 9. Engraving a wide range of metal materials: stainless steel, copper, aluminum, chrome brass, credit card, etc. 10. Engraving non-metallic materials: silicon wafers, ceramics, plastics, rubber, epoxy resin, ABS, ink, electroplating, spraying, and coating. 11. Laser Machine for Mid frame, Bezel, Back glass Separate, Marking, Engraving. Specification: Total power: less than 800w Environment temperature: -10°C~65°C Marking accuracy: <0.001mm Repeatability: <0.001mm Marking speed: <10000mm/s Marking depth: 0.015-0.5mm Cooling method: Built-in air cooling Marking area: 175mmx175mm Marking line width: 0.05-0.01mm Laser power: Pro: 6W; Pro Plus: 20W Laser wavelength: 1064nm Smoking function: Built-in fume extractor Equipment size: 275*295*461.5(mm) Packing size: 355*375*580(mm) Equipment weight: 21.5KG Gross weight: 23kg Package includes: 1 x Laser Machine 1 x Power cable

Minimum Order: 1 bags

MT-2017 7 Inchs Automatic Vacuum Laminating Machine For Mobile Phone LCD Screen Oca Glass Polarizer Laminating Film Bubble Removal. Cell Phone Bubble Removing Repairing Tools. Features: 1: LCD glass oca polarizer film lamination, bubble removal 2: tested before shipping 3: 7 inch laminating machine 5: high security for LCD,zero-ridk

Minimum Order: 1 bags

TBK-208M Professional LCD Repair Machine 3-in-1 Vacuum Separating Laminating and Bubble-Removing Machine to Repare 8.5" LCD Screen, 3 in 1 LCD Screen Vacuum Laminating Machine, Defoaming Bubble remover, LCD Glass Separating MachineM, lamination defoaming separator. Features: Fit for the touch screen phones up to 8.5" size. Automatic Lock cover, do not need to screw any more. Easy operation, easy to learn the skills, work very fast. All in 1 machine, save space and no need mold and bubble remover. Smart Constant Pressure; Automatic Lamination and Debubbling Mode. Specification: Name: 3-in-1 intelligent lamination defoaming separator Brand: TBK Model: 208M Voltage: 110V/220V Power: 500W Workbench size: 19*11cm Fitting warehouse size: 20*11cm Product size: 19.5*37*20cm Package includes: 1 x 3-in-1 intelligent machine 1 x Power cable

Minimum Order: 1 bags

M-Triangel Z One mini one Visual Auto Focus Laser machine for Phone Back Glass Separation Machine , Mobile Phone Glass Back Separation Machine for iPhone / Samsung / Huawei / XiaoMi Back Glass Removal Repair, Glass / Bezel Separation Laser Marking Machine m-triangel phone butt, DIY laser marking machine. M-Triangel Z One mini Visual autofocus Laser machine For iPhone XR 11 Pro Max 12 Pro Max Back Glass LCD Frame Removal Repair Features : Separate Midframe / Bezel / Back glass, Marking / Engraving Technology Upgrading - intelligent ranging system Easy operation, come with Software and drawings (Continuous updating...) Suitable for all touch screen smart phones Laser Repair in the market: for iPhone, Huawei, XiaoMi, OPPO, Vivo, LG series; Many type of metals are workable: Gold, Silver, Stainless Steel, Copper, Aluminum, chrome Brass, etc. Alloy and metal oxides: Anodized Aluminum 12 months warranty, online technical support and training is provided. Product parameters: Item name: Z One mini one Laser machine Brand: M-Triangel Material: Anodized Aluminum Silver color Voltage: 110-220V 50-60Hz Power: 120W Laser power: optional maximum 20W Laser wavelength: 1064nm Marking range: 175x175mm Equipment size (standing): 300 * 542 * 418 (mm) Equipment size (folding): 300 * 518 * 166 (mm)

Minimum Order: 1 bags

M-TRIANGEL PG oneS intelligent auto focus laser machine for separating or engraving phone middle frame and rear glass, M-TRIANGEL Laser Machine For Mobile Phone Back Glass Remover LCD Frame Repair, it can print logos for your products. Laser machine for Phone Back Glass Removing Repair, laser marking, laser separating, laser DIY Logo. Options: With Build-in Computer Without Build-in Computer Specifications: Voltage: 220V/110V Laser power: 20W Total power: not more than 800 W Making accuracy:≤ 0.001 mm Making speed: ≤10000 mm/s Cooling method: built-in air cooling Laser wavelength: 1.06 μm Equipment size: 588.5*300*538 mm Power supply: 220 V±10%, 50 Hz± 5% Ambient temperature: -10℃~65℃ Repeat-ability: ≤0.001 mm Marking depth: 0.015-0.5 mm Marking format: 175 mm x 175 mm Marking line width: 0.05-0.01 mm Features : 1. Separate Mid-Frame / Bezel / Back glass, Marking / Engraving 2. Unique styling design 3. Rated power of 20W 4. Insufficiently intelligent and flexible closed system 5. Easy operation, Come with Software and drawings (Continuous updating...) 6. Suitable for all touch screen smartphones Laser Repair in the market: for IPhone, Huawei, XiaoMi, OPPO, Vivo,LG series; 7. Applicable Many types of metals materials: Gold, Silver, Stainless Steel, Copper, Aluminum, chrome Brass, etc. 8. Alloy and metal oxides: Anodized Aluminum 9. 12 months warranty. Package list: 1 x Laser Machine 1 x Data cable 3 x Hex wrench 1 x Power Cable

Minimum Order: 1 bags

Original QUICK 706W+ 2 in 1 hot air gun soldering iron rework station, QUICK 706W+ digital display SMD rework welding station. QUICK 706W+ ESD Safe lead free phone rework station for BGA soldering repair. QUICK 706W+ Hot Air Soldering Rework Station (2 in 1). Specifications: Hot Air Station Power Consumption: 580W Soldering Iron Power Consumption: 50W 24V/AC Voltage: 220V/110V Soldering Iron Output Temperature: 100°c - 480°c Display:LED Digital Display Air Out Way: Straight wind Features: 1. 2 in 1 rework station, bga hot air rework station+soldering iron 2. Stepless airflow adjusting with a wide range. Temperature can be conveniently adjusted. 3. LED accurate digital display, single control. 4. Small Size. Save working space. 5. Ceramic skeleton heating core,increase stability and not easy to burn short circuits. 6. Straight wind, high speed,low noise and strong wind 7. The handle is equipped with a sensor device, which is placed on the handle frame. 8. The system will automatically cool down and enter the standby state.

Minimum Order: 1 bags