Consumer Electronics - Others

FNIRSI-1013D Digital tablet oscilloscope dual channel 100M bandwidth 1GS sampling rate mini tablet digital oscilloscope FNIRSI 1013D is a full-featured, highly practical, cost-effective dual- channel flat-panel oscilloscope for the maintenance and R & D industry. note:After the production of the product, we will carry out multiple measurements to ensure the quality of the product. If you encounter any problems in the use, please contact us, and we will contact the technical personnel to answer for you at the first time. Features: Intelligent anti-burn,1X can withstand up to 400V withstand voltage. 100MHz analog bandwidth @ 1GSa/s sampling rate (1X=5MHz,10X=100MHz). Fully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast. Capacitive touching screen, the same as the touching mode of modern mobile tablet, is not a resistive touching screen with ancient nail operation. High measurement voltage range, 1X can measure 0~40V, 10X can measure 0~400V,100X can measure 0~4000V. Up to 12 parameters measurement: VPP,VP,Vmax,Vmin,Vavg,Vrms,Frequent,Duty+,Duty , -,Time+,Time-,Period. Cursor measurement function, it is convenient to manually measure the period and frequency and voltage. Complete triggering function (single, normal, automatic). At any time, the waveform display (pause function) is frozen. Equipped with high efficiency One-button AUTO. One-button waveform storage and screenshot. Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data. Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc. Equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis. Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals. FFT display function, can analyze the spectral characteristics of the signal. Built in 6000mAh rechargeable lithium battery,fully charged for 4 hours of continuous use at the highest screen brightness. Memory compression technology, waveform refresh screen does not flicker. Screen brightness adjustment. Background grid brightness adjustment. Ultra thin, easy to carry.

Minimum Order: 1 bags

FNIRSI-5012H 2.4-inch Screen Digital Oscilloscope 500MS/s Sampling Rate 100MHz Analog Bandwidth Support Waveform Storage The FNIRSI-5012H is a versatile, highly practical, cost-effective handheld oscilloscope for the maintenance industry and the R&D industry with FNIRSI's real-time sampling rate of up to 500MS/s and 100MHz analog bandwidth. With full trigger function (single, normal, automatic), it can be used freely for both periodic analog signals and non-periodic digital signals. The built-in high voltage protection module can withstand up to 400V continuous voltage and 600V peak voltage. Don't worry about the oscilloscope burnout caused by the high voltage not being probed to the 10X position. Large time base scan mode that monitors slow level changes. Equipped with high-efficiency one-button AUTO, the measured waveform can be displayed without complicated adjustment. Display high-definition LCD screen with 2.4-inch 320*240 resolution. Extremely convenient and fast waveform storage function, built-in 64M storage space, can store up to 2000 waveform pictures, the storage process is simple and fast, save the current waveform anytime and anywhere, just one touch, no cumbersome tips and choices, quietly It is very convenient to save the current waveform. Powerful waveform file manager, support for thumbnail browsing, viewing, detail viewing, page turning, deletion and more. Built-in 3000mah high- quality lithium battery, can be used continuously for 8 hours when fully charged. The body is equipped with high-quality silicone protective cover, non-toxic and lead-free environmental protection, anti-skid, anti-shock and shockproof, comprehensive protection of the fuselage, soft texture, feel very comfortable. Key features: 1:Intelligent anti-burn,1X Can withstand up to 600V withstand voltage 2:Afterglow display technology 3:2.4 inch color display screen 4:100MHz analog bandwidth @ 500MS/s sampling rate(1X = 5MHz,10X = 100MHz) 5:One-button waveform storage 6:Built-in 64M storage space, the maximum storage of 2000 waveform pictures 7:Powerful waveform file manager, support thumbnail browsing, viewing, details view, flip, delete and other functions 8:High measurement voltage range, 1X can measure 0 ~ 80 V, 10X can measure 0 ~ 800V 9:Up to 12 parameters measurement:VPP,VP,Vmax,Vmin,Vavg,Vrms,Frequen , t,Duty+,Duty-,Time+,Time-,Tim e 10:At any time, the waveform display (pause function) is frozen 11:Equipped with high efficiency One-button AUTO 12:Complete triggering function (single, normal, automatic) 13:Built in 3000mAh rechargeable lithium battery,Fully charged for 8 hours of continuous use 14:Screen brightness adjustment 15:Memory compression technology, waveform refresh screen does not flicker 16:Anti-slip anti-drop silicone sleeve 17:Ultra small volume, easy to carry Package includes: 1 x FNIRSI-5012H oscilloscope host 1 x Matching 100MHz probe(1X and 10X) 1 x Micro USB data line 1 x User manual (English) 1 x High quality package

Minimum Order: 1 bags

FNIRSI-1C15 Professional Digital Oscilloscope 500MS/s Sampling Rate 110MHz Analog Bandwidth Support Waveform Storage FNIRSI-1C15 is a fully functional, practical and cost-effective handheld oscilloscope newly launched by FNIRSI. The real-time sampling rate is 500M, and the analog bandwidth is 110MHz. In addition to all the functions of a conventional handheld oscilloscope, we also added a one-key quick auto function on this basis, so you can easily grasp the waveform like a desktop computer. We have added 1k Hz self-test square wave for FNIRSI-1C15, and the storage depth has been upgraded to 12kpts. With reference to the waveform, you can pause at any time to save the previous frame waveform to the screen, and you can compare it with the currently refreshed waveform. Afterglow and scroll modes make it easier to detect and record waveforms. Built-in 3000mAH rechargeable battery, it can work continuously for more than 10 hours after fully charged. The body is equipped with a high-quality silicone sleeve, which is non-slip and anti-drop. The joystick replaces the original arrow keys, making the operation simpler and more effective. Package: 1 * FNIRSI 1C15 oscilloscope 1 * P6100 High Voltage Probe 1 * Allgator Clip Probe 1 * Micro USB charging cable 1 * English User Manual 1 * Cloth bag

Minimum Order: 1 bags

MCH Digital Oscilloscope Storage Oscilloscope Dual Channel Oscilloscope Sampling 1G 100MHZ DS-2100CA Model:DS-2025CA 2060ca 2010ca 2200ca (25m 60m 100m 200m) Channels:2+Ext.Trigger Bandwid , th:25m 60m 100m 200mhz Rising time:1.8ns Time base:1ns to 50s/div Real time sample rate:1GSa/s Equivalent sample rate:50GSa/s Input impedance:1MΩ//13pF Input coupling:DC, AC, GND Trigger:Edge, video, pulse, delay Acquisition modes:Auto, normal, single Trigger sources:CH1, CH2, Ext, Ext/5, Ext(50Ω) Horizontal accuracy:±0.01% Vertical sensitivity:2 mV/div to 5V/div Vertical resolution:8bit Max. input voltage:400V(DC+AC peak),5Vrms@50Ω Auto measurements: Vpp, Vamp, Vrms, Vmin, Vtop,Vbase,Vbase,Vavg,Freq,Period,Rise time Fall time,+width,-width,overshoot,preshoot,+duty,-duty, , etc Math:+-×÷FFT Storage:10wavefor , ms,10 steps FFT: Window Hanning, hamming, Blackman-harris, rectangylar Sample points 1024points X-Y: Bandwi , dth 200MHz Phase diff ±3 degrees Display:A/CA: mono/color,320×240 resolution Power supply:Worldwide 100-225 V/40VA Max Interface:USB port Accessories:Probe×2, power cord, user's manual Dimension:303(W)×145(H)×288(D)mm Weight:3.5kg

Minimum Order: 1 bags

Rigol MSO5074 oscilloscope has 4 channels 70 MHz mixed signal 8GSa/s sample rate and 100M point memory. Original high quality Rigol MSO5074 digital oscilloscope can be upgraded easily, it features a 100 Mpts memory depth which is upgradable to 200 Mpts via software key code. It also includes 16 digital channels as a standard feature - simply add the optional PLA2216 logic probe to operate. Features: 1. Four channels, 70 MHz digital / mixed signal oscilloscope 2. Up to 8 GSa/s real-time sample rate 3. 100 Mpts memory depth, optional memory depth up to 200 Mpts 4. 16 digital channels included - requires optional PLA2216 logic probe to operate 5. High waveform capture rate (over 500,000 wfm/s) 6. Multiple interfaces available: USB HOST DEVICE, LAN(LXI), HDMI, TRIG OUT, and USB-GPIB 7. Remote wireless control software - migrate instrument control and waveform analysis to PC 8. Auto measurement of 41 waveform parameters; full-memory hardware measurement function 9. Up to 450,000 frames of hardware real-time and ceaseless

Minimum Order: 1 bags

DS211 is an update style of DSO201, a pocket size digital storage oscilloscope fulfills basic electronic engineering requirements. It is equipped with 320*240 color display, Weighs only 65g! Portable Digital Oscilloscope DIY Kit provides waveform viewing. Product Specification : MCU: STM32F103VC ADC: MCU internal ADC Number of channels: 1 Analog channel + 1 internal channel Analog bandwidth: 200KHz The maximum sampling rate: 1MSa/s Maximum storage depth: 8K Horizontal scanning speed: 1uS / Div ~ 2S / Div (1-2-5 step) Vertical Sensitivity: 20mv / Div ~ 10V / Div (1-2-5 step) Input impedance: 1MΩ Coupling: DC / AC Trigger mode: Rising / falling edge trigger Auto adjustment mode: AUTO_FIT Operation waveform: -A, RecA, A + RecA Signal output: Square wave, sine wave, triangular wave, sawtooth wave Trigger mode: Auto, Normal, Single, None, Scan Measured values: Signal frequency / period / duty cycle, Voltage peak-to- peak value / effective value / maximum value / minimum value / average value Storage: 8MB built-in USB flash disk Can be installed 1 PC APP Operation: Press the key USB interface: Micro USB Battery: 550mAh Screen size: about 2.8 inches Screen resolution: 320*240 Size: about 106.5*55.7*11.5 mm/ 41.93*21.93*4.53 in Weight (with battery): about 65g Open source: application layer open source Certification: CE / FCC Usage : Based on STM32 do open source products. Oscilloscope and a multimeter. The good helper in measurement and maintenance work. Can be used as a good tool for STM32 series MCU programming. Packing List : 1 * DS211 host 1 * DS211 dedicated MCX probe 1 * 800mah built-in lithium battery 1 * Mini USB cable 1 * Manual 1 * Cloth velvet protective bag

Minimum Order: 1 bags

UNI-T UTD2102CEX Digital Storage Oscilloscopes: 100MHz Dual Channels 1Gs/s Product Features : Dual analog channels width range 1mV/div~20V/div; 7 inches widescreen LCD displays; The new interface style; Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device; USB drive system software upgrade; Storage of waveforms setups and interfaces waveforms and setups reproduction; Automatic measurement of 32 waveform parameters; Unique waveform recording and replay function; Multilingual menu displays. Product Specification : Specification: UTD2102CEX Channels: 2 Bandwidth: 100MHz Sample Rate: 1Gs/s Rise Time: ≤3.5ns Memory Depth: 2 5kpts Waveform Acquisition Rate: ≥2000wfms/s Vertical Sensitivity(V/div): 1mV/div~20V/div Time base Range(s/div): 2ns/div~50s/div Storage: Setup,Wave,Bitmap Trigger Modes: Edge, Pluse, Video,Slope,Alternate Interface: USB OTG Package List : 1 * UTD2102CEX Digital Storage Oscilloscope 2 * Test Probes(1×,10× switchable) 1 * US Power Cable 1 * USB Cable 1 * PC Software CD 1 * English Manual

Minimum Order: 1 bags

SUGON T1602 Lead-freeWelding Rework Station For JBC Soldering Iron Tip BGA PCB IC Repair Solder Tools. Features: Independent control of A/B zone 2 in 1 soldering iron tip, master Level Two independent soldering iron handle plug settings No influence, no interference, more convenient; Two soldering iron tips can be used separately at the same time for different maintenance operations Applicable Industries: Machinery Repair Shops, Manufacturing Plant, Retail, Phone Repair Stores, Repair Training Schools Parameter: Dimensions: 16*18*19cm Usage: lead-free soldering Product Model: SUGOn T1602 Input Voltage: AC110V/220V 50/60H Power: 120W(max) Temperature range: 100℃-450℃ Display: LCD digital display Carton Quantity: 4PCS Feature 1: 1S Rapid Heating Feature 2: Lead-free Soldering Station Feature 3: T12 Tip Nano Soldering Tip

Minimum Order: 1 bags

DS-201B Macbook Tin Planting Platform for PMU SMC T1 T2 RAM NAND WIFI Power BGA Chips Ds-201b: mainly used for ball planting of small BGA chips (including PMU SMC T1 T2 ram NAND WiFi power chip) Including: 16pcs steel mesh, 15pcs steel mesh fixing base, 2pcs magnetic base, 9pcs steel sheet and 1pcs tin knife

Minimum Order: 1 bags

QUICK 861DW original hot air gun fan heating core fan for mobile phone circuit board repair, Quick 220V 1000W 861DW hot air gun fan accessories.

Minimum Order: 1 bags

Original QUICK TS1100 soldering iron station for microsoldering, QUICK TS1100 90W lead free soldering station for PCB tiny parts welding repair. Phone repair soldering tool QUICK TS1100. 90W QUICK TS1100 Soldering Station For Phone Repair. Description: 1. Password lock function, effective protection of process parameters 2. Fast switching 3 different temperature points, temperature alarm function, temperature changer 3. Handle light, and has the handle intelligent discrimination function 4. Using an LCD liquid crystal display, hot-plug plug-in design, easy maintenance 5. Anti-static design, and has ESD detection 6. Increase the sleep function, protect the tip, to extend the life 7. Meet different welding requirements of different products 8. Automatic shutdown function, reduce the cost of supplies, saving energy 9. With the change in the size of solder joints and intelligent distribution of output power, the maximum power of 70W 10. Real-Time Temperature Monitoring .

Minimum Order: 1 bags

Handskit T210 Soldering Station compatible JBC 210 T26 solder rework station Welding Automatic Sleep: 1 Sleep Time Press and hold the encoder for 2 seconds to enter Other Set，Sleep-tim--- according to your choice, the setting range is 0-60 minutes, the default is 1minutes, when in sleep state, the temperature of the soldering iron tip will be reduced to protect the life of the soldering iron tip ,Press 2 sencond quit 2 RESET Press and hold the encoder for 2 seconds to enter Other Set，If you need to restore the factory settings, set the position to 1, and the soldering iron will restart after exiting the menu, and all parameters will be restored to the factory settings.

Minimum Order: 1 bags

Keep your experience smooth and seamless, even as high speed action unfolds around you with a super-fast processor and high-resolution display. Experience total immersion with 3D positional audio, hand tracking and haptic feedback, working together to make virtual worlds feel real. Explore an expanding universe of over 350 titles across gaming, fitness, social/multiplayer and entertainment, including exclusive blockbuster releases and totally unique VR experiences. Enjoy the perfect combination of comfort and safety with a wipeable facial interface, wrist straps, and adjustable knuckle straps. Protect your system (and the room around you) when the action gets gripping as wrist straps and adjustable knuckle straps help keep your controllers firmly in your hands. Wipeable padded interfaces let you easily remove sweat and dirt after each active session and get right back to your next workout, gaming session or presentation.

Minimum Order: 1 bags

M-Triangel KO4 Edge LCD OLED OCA Laminating Machine For iPhone Samsung Mobile Phone Watch Screen refurbishment, maximum suitable for 7 inch LCD OLED screen OCA vacuum laminating. M-Triangel KO4 mini OCA Vacuum laminator machine. Features: 1. KO4 is a lightweight design cell phone screen repair vacuum laminator, and lamination container is 190*135mm. 2. Maximum suitable for 7 inch LCD screen. 3. The laminator machine is compatible with curved mold, pressure can be switched, and suitable for cell phone and smart watch screen refurbishment. 4. M-Triangel is committed to developing the most suitable products for user needs, 5. KO4 adapts to market demand, mainly using high hardness aluminum alloy material design, volume smaller, lighter weight, with CE certification, safe and secure. Specification: Power supply: AC250V(optional AC110V/AC220V) Working environment: 20-30℃, clean and dust-free Laminating method: flat laminating Power: 800W Working temperature: set to 40℃-50℃ is recommended Laminating time: Recommended 30S Equipment size: 280"311*413(MM) Packing size: 340*375*465(MM) Net weight: 17.6KG Gross weight: 18.55KG Laminating size: 190*135(MM) Note: Package not including vacuum pump, air compressor, laminating mold. You can choose to buy from us separately if needed.

Minimum Order: 1 bags